aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice_ethtool.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-25ice: Implement ethtool get/set rx-flow-hashMd Fahad Iqbal Polash1-0/+243
Provide support to change or retrieve RSS hash options for a flow type. The supported flow-types are: tcp4, tcp6, udp4, udp6, sctp4, sctp6. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-03ice: Return error on not supported ethtool -C parametersMichal Swiatkowski1-0/+50
Check for all unused parameters, if ethtool sent one of them, print info about that and return error. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-03ice: Add ice_for_each_vf() macroBrett Creeley1-2/+5
Currently we do "for (i = 0; i < pf->num_alloc_vfs; i++)" all over the place. Many other places use macros to contain this repeated for loop, So create the macro ice_for_each_vf(pf, i) that does the same thing. There were a couple places we were using one loop variable and a VF iterator, which were changed to using a local variable within the ice_for_each_vf() macro. Also in ice_alloc_vfs() we were setting pf->num_alloc_vfs after doing "for (i = 0; i < num_alloc_vfs; i++)". Instead assign pf->num_alloc_vfs right after allocating memory for the pf->vf array. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya1-5/+5
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-11-22ice: Implement ethtool ops for channelsHenry Tieman1-0/+185
Add code to query and set the number of channels on the primary VSI for a PF. This is accessed from the 'ethtool -l' and 'ethtool -L' commands, respectively. Though the ice driver supports asymmetric queues report an IRQ vector that has both Rx and Tx queues attached and is counted as a 'combined' channel. Signed-off-by: Henry Tieman <henry.w.tieman@intel.com> Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-22ice: Add ice_pf_to_dev(pf) macroBrett Creeley1-26/+31
We use &pf->dev->pdev all over the code. Add a simple macro to do this for us. When multiple de-references like this are being done add a local struct device variable. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-22ice: Do not use devm* functions for local usesTony Nguyen1-28/+22
In situations where we alloc and free memory within the same function do not use the devm_* variants; use regular alloc and free functions. Remove any unused vars if there are no usages after these changes. Also, replace an allocate and copy with kmemdup() and remove an unnecessary memset() to 0 after a kzalloc(). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-22ice: Fix setting coalesce to handle DCB configurationBrett Creeley1-3/+10
Currently there can be a case where a DCB map is applied and there are more interrupt vectors (vsi->num_q_vectors) than Rx queues (vsi->num_rxq) and Tx queues (vsi->num_txq). If we try to set coalesce settings in this case it will report a false failure. Fix this by checking if vector index is valid with respect to the number of Tx and Rx queues configured. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-08ice: configure software LLDP in ice_init_pf_dcbPaul Greenwalt1-5/+0
Move software LLDP configuration when FW DCBX is disabled to ice_init_pf_dcb, since that is where the FW DCBX state is determined. Remove this software LLDP configuration from ice_vsi_setup and ice_set_priv_flags. Software configuration includes redirecting Rx LLDP packets up the stack, when FW DCBX is not running. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-08ice: Fix to change Rx/Tx ring descriptor size via ethtool with DCBxUsha Ketineni1-7/+7
This patch fixes the call trace caused by the kernel when the Rx/Tx descriptor size change request is initiated via ethtool when DCB is configured. ice_set_ringparam() should use vsi->num_txq instead of vsi->alloc_txq as it represents the queues that are enabled in the driver when DCB is enabled/disabled. Otherwise, queue index being used can go out of range. For example, when vsi->alloc_txq has 104 queues and with 3 TCS enabled via DCB, each TC gets 34 queues, vsi->num_txq will be 102 and only 102 queues will be enabled. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-06ice: add ethtool -m support for reading i2c eeprom modulesScott W Taylor1-0/+147
Implement ethtool -m support to read eeprom data from SFP/QSFP modules. Signed-off-by: Scott W Taylor <scott.w.taylor@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-04ice: introduce frame padding computation logicMaciej Fijalkowski1-1/+1
Take into account the underlying architecture specific settings and based on that calculate the possible padding that can be supplied. Typically, for x86 and standard MTU size we will end up with 192 bytes of headroom. This is the same behavior as our other drivers have and we can dedicate it for XDP purposes. Furthermore, introduce the Rx ring flag for indicating whether build_skb is used on particular. Based on that invoke the routines for padding calculation. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-04ice: introduce legacy Rx flagMaciej Fijalkowski1-0/+6
Add an ethtool "legacy-rx" priv flag for toggling the Rx path. This control knob will be mainly used for build_skb usage as well as buffer size/MTU manipulation. In preparation for adding build_skb support in a way that it takes care of how we set the values of max_frame and rx_buf_len fields of struct ice_vsi. Specifically, in this patch mentioned fields are set to values that will allow us to provide headroom and tailroom in-place. This can be mostly broken down onto following: - for legacy-rx "on" ethtool control knob, old behaviour is kept; - for standard 1500 MTU size configure the buffer of size 1536, as network stack is expecting the NET_SKB_PAD to be provided and NET_IP_ALIGN can have a non-zero value (these can be typically equal to 32 and 2, respectively); - for larger MTUs go with max_frame set to 9k and configure the 3k buffer in case when PAGE_SIZE of underlying arch is less than 8k; 3k buffer is implying the need for order 1 page, so that our page recycling scheme can still be applied; With that said, substitute the hardcoded ICE_RXBUF_2048 and PAGE_SIZE values in DMA API that we're making use of with rx_ring->rx_buf_len and ice_rx_pg_size(rx_ring). The latter is an introduced helper for determining the page size based on its order (which was figured out via ice_rx_pg_order). Last but not least, take care of truesize calculation. In the followup patch the headroom/tailroom computation logic will be introduced. This change aligns the buffer and frame configuration with other Intel drivers, most importantly with iavf. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-04ice: Add support for AF_XDPKrzysztof Kazimierczak1-0/+7
Add zero copy AF_XDP support. This patch adds zero copy support for Tx and Rx; code for zero copy is added to ice_xsk.h and ice_xsk.c. For Tx, implement ndo_xsk_wakeup. As with other drivers, reuse existing XDP Tx queues for this task, since XDP_REDIRECT guarantees mutual exclusion between different NAPI contexts based on CPU ID. In turn, a netdev can XDP_REDIRECT to another netdev with a different NAPI context, since the operation is bound to a specific core and each core has its own hardware ring. For Rx, allocate frames as MEM_TYPE_ZERO_COPY on queues that AF_XDP is enabled. Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com> Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-11-04ice: Add support for XDPMaciej Fijalkowski1-3/+47
Add support for XDP. Implement ndo_bpf and ndo_xdp_xmit. Upon load of an XDP program, allocate additional Tx rings for dedicated XDP use. The following actions are supported: XDP_TX, XDP_DROP, XDP_REDIRECT, XDP_PASS, and XDP_ABORTED. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12ice: Enable DDP package downloadTony Nguyen1-0/+27
Attempt to request an optional device-specific DDP package file (one with the PCIe Device Serial Number in its name so that different DDP package files can be used on different devices). If the optional package file exists, download it to the device. If not, download the default package file. Log an appropriate message based on whether or not a DDP package file exists and the return code from the attempt to download it to the device. If the download fails and there is not already a package file on the device, go into "Safe Mode" where some features are not supported. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-12ice: Fix FW version formatting in dmesgLukasz Czapnik1-25/+0
The FW build id is currently being displayed as an int which doesn't make sense. Instead display FW build id as a hex value. Also add other useful information to the output such as NVM version, API patch info, and FW build hash. Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-05ice: Allow for delayed LLDP MIB change registrationDave Ertman1-2/+8
Add an additional boolean parameter to the ice_init_dcb function. This boolean controls if the LLDP MIB change events are registered for. Also, add a new function defined ice_cfg_lldp_mib_change. The additional function is necessary to be able to register for LLDP MIB change events after calling ice_init_dcb. The net effect of these two changes is to allow a delayed registration for MIB change events so that the driver is not accepting events before it is ready for them. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-05ice: change work limit to a constantJesse Brandeburg1-12/+2
The driver has supported a transmit work limit that was configurable from ethtool for a long time, but there are no good use cases for having it be a variable that can be changed at run time. In addition, this variable was noted to be causing performance overhead due to cache misses. Just remove the variable and let the code use a constant so that the functionality is maintained (a limit on the number of transmits that will be cleaned in any one call to the clean routines) without the cache miss. Removes code, removes a variable, removes testing surface. Yay. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-03ice: Report what the user set for coalesce [tx|rx]-usecsBrett Creeley1-44/+44
Currently if the user sets an odd value for [tx|rx]-usecs we align the value because the hardware only understands ITR values in multiples of 2. This seems misleading because we are essentially telling the user that the ITR value is odd, when in fact we have changed it internally. Fix this by reporting that setting odd ITR values is not allowed. Also, while making changes to ice_set_rc_coalesce() I noticed a bit of code/error duplication. Make the necessary changes to remove the duplication. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-23ice: update ethtool stats on-demandBruce Allan1-2/+5
Users expect ethtool statistics to be updated on-demand when invoking 'ethtool -S <iface>' instead of providing a snapshot of statistics taken once a second (the frequency of the watchdog task where stats are currently updated). Update stats every time 'ethtool -S <iface>' is run. Also, fix an indentation style issue and an unnecessary local variable initialization in ice_get_ethtool_stats() discovered while investigating the subject issue. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-23ice: Rename ethtool private flag for lldpDave Ertman1-3/+3
The current flag name of "enable-fw-lldp" is a bit cumbersome. Change priv-flag name to "fw-lldp-agent" with a value of on or off. This is more straight-forward in meaning. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-20ice: fix set pause param autoneg checkPaul Greenwalt1-1/+26
When ETHTOOL_GLINKSETTINGS is defined get pause param pause->autoneg reports SW configured setting, however when not defined get pause param pause->autoneg reports the link status. Set pause param needs to compare pause->autoneg with the same source as get pause param to block the user from changing autoneg with the set pause param option, or the user may be incorrectly blocked from changing Rx|Tx pause settings. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-31ice: add lp_advertising flow control supportPaul Greenwalt1-32/+72
Add support for reporting link partner advertising when ETHTOOL_GLINKSETTINGS defined. Get pause param reports the Tx/Rx pause configured, and then ethtool issues ETHTOOL_GSET ioctl and ice_get_settings_link_up reports the negotiated Tx/Rx pause. Negotiated pause frame report per IEEE 802.3-2005 table 288-3. $ ethtool --show-pause ens6f0 Pause parameters for ens6f0: Autonegotiate: on RX: on TX: on RX negotiated: on TX negotiated: on $ ethtool ens6f0 Settings for ens6f0: Supported ports: [ FIBRE ] Supported link modes: 25000baseCR/Full Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: None BaseR RS Advertised link modes: 25000baseCR/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: None BaseR RS Link partner advertised link modes: Not reported Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 25000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes When ETHTOOL_GLINKSETTINGS is not defined, get pause param reports the negotiated Tx/Rx pause. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-30ice: Trivial cosmetic changesAnirudh Venkataramanan1-1/+1
This patch mostly capitalizes abbreviations in code comments. Fixed some typos and removed some unnecessary newlines as well. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-30ice: Add switch rules to handle LLDP packetsDave Ertman1-0/+11
Add call to configure dropping egress LLDP packets in ice_vsi_setup and remove the rule in ice_vsi_release. Add calls to add/remove rule to route LLDP packets to default VSI when FW LLDP engine is disabled/enabled and remove rule if applied during ice_vsi_release. In the function ice_add_eth_mac(), there is a line that hard codes the filter info flag to TX. This is incorrect as this flag will be set by the calling function that built the list of filters to add. So remove the hard coded value. This patch also contains a fix to stop treating the DCBx state of "Not Started" as an error state that kicks DCB in SW mode. This will address having non-cabled interfaces automatically go into SW mode with the FW engine running. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-29ice: Add support for Forward Error Correction (FEC)Paul Greenwalt1-0/+216
This patch adds driver support for Forward Error Correction (FEC) and ethtool handlers to set/get FEC params. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-29ice: Remove redundant and premature event configDave Ertman1-6/+0
In the path for re-enabling FW LLDP engine, there is a call to register for LLDP MIB change events. This call is redundant, in that the call to ice_pf_dcb_cfg will already register the driver for these events. Also, the call as it stands now is too early in the flow before before DCB is configured. Remove the redundant call. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-29ice: Refactor interrupt trackingBrett Creeley1-3/+2
Currently we have two MSI-x (IRQ) trackers, one for OS requested MSI-x entries (sw_irq_tracker) and one for hardware MSI-x vectors (hw_irq_tracker). Generally the sw_irq_tracker has less entries than the hw_irq_tracker because the hw_irq_tracker has entries equal to the max allowed MSI-x per PF and the sw_irq_tracker is mainly the minimum (non SR-IOV portion of the vectors, kernel granted IRQs). All of the non SR-IOV portions of the driver (i.e. LAN queues, RDMA queues, OICR, etc.) take at least one of each type of tracker resource. SR-IOV only grabs entries from the hw_irq_tracker. There are a few issues with this approach that can be seen when doing any kind of device reconfiguration (i.e. ethtool -L, SR-IOV, etc.). One of them being, any time the driver creates an ice_q_vector and associates it to a LAN queue pair it will grab and use one entry from the hw_irq_tracker and one from the sw_irq_tracker. If the indices on these does not match it will cause a Tx timeout, which will cause a reset and then the indices will match up again and traffic will resume. The mismatched indices come from the trackers not being the same size and/or the search_hint in the two trackers not being equal. Another reason for the refactor is the co-existence of features with SR-IOV. If SR-IOV is enabled and the interrupts are taken from the end of the sw_irq_tracker then other features can no longer use this space because the hardware has now given the remaining interrupts to SR-IOV. This patch reworks how we track MSI-x vectors by removing the hw_irq_tracker completely and instead MSI-x resources needed for SR-IOV are determined all at once instead of per VF. This can be done because when creating VFs we know how many are wanted and how many MSI-x vectors each VF needs. This also allows us to start using MSI-x resources from the end of the PF's allowed MSI-x vectors so we are less likely to use entries needed for other features (i.e. RDMA, L2 Offload, etc). This patch also reworks the ice_res_tracker structure by removing the search_hint and adding a new member - "end". Instead of having a search_hint we will always search from 0. The new member, "end", will be used to manipulate the end of the ice_res_tracker (specifically sw_irq_tracker) during runtime based on MSI-x vectors needed by SR-IOV. In the normal case, the end of ice_res_tracker will be equal to the ice_res_tracker's num_entries. The sriov_base_vector member was added to the PF structure. It is used to represent the starting MSI-x index of all the needed MSI-x vectors for all SR-IOV VFs. Depending on how many MSI-x are needed, SR-IOV may have to take resources from the sw_irq_tracker. This is done by setting the sw_irq_tracker->end equal to the pf->sriov_base_vector. When all SR-IOV VFs are removed then the sw_irq_tracker->end is reset back to sw_irq_tracker->num_entries. The sriov_base_vector, along with the VF's number of MSI-x (pf->num_vf_msix), vf_id, and the base MSI-x index on the PF (pf->hw.func_caps.common_cap.msix_vector_first_id), is used to calculate the first HW absolute MSI-x index for each VF, which is used to write to the VPINT_ALLOC[_PCI] and GLINT_VECT2FUNC registers to program the VFs MSI-x PCI configuration bits. Also, the sriov_base_vector is used along with VF's num_vf_msix, vf_id, and q_vector->v_idx to determine the MSI-x register index (used for writing to GLINT_DYN_CTL) within the PF's space. Interrupt changes removed any references to hw_base_vector, hw_oicr_idx, and hw_irq_tracker. Only sw_base_vector, sw_oicr_idx, and sw_irq_tracker variables remain. Change all of these by removing the "sw_" prefix to help avoid confusion with these variables and their use. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-29ice: Add handler for ethtool selftestAnirudh Venkataramanan1-0/+592
This patch adds a handler for ethtool selftest. Selftest includes testing link, interrupts, eeprom, registers and packet loopback. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Format ethtool reported statsRichard Rodriguez1-54/+54
Fixes ethtool -S reported stats in ice driver to match format and nomenclature of the ixgbe driver. Signed-off-by: Richard Rodriguez <richard.rodriguez@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Advertise supported link modes if none requestedTony Nguyen1-25/+50
User requested link modes affect what is returned as an advertised link mode. If no modes have been requested, we are not advertising any link modes. Advertise what we are capable of supporting if no link modes have been requested. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Fix hang when ethtool disables FW LLDPDave Ertman1-2/+2
When disabling and enabling VSIs, there are a couple of flows that recursively acquire the RTNL lock which causes a deadlock. Fix that. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Implement LLDP persistenceAnirudh Venkataramanan1-5/+5
Implement LLDP persistence across reboots, start and stop of LLDP agent. Add additional parameter to ice_aq_start_lldp and ice_aq_stop_lldp. Also change the ethtool private flag from "disable-fw-lldp" to "enable-fw-lldp". This change will flip the boolean logic of the functionality of the flag (on = enable, off = disable). The change in name and functionality is to differentiate between the pre-persistence and post-persistence states. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Remove __always_unused attributeTony Nguyen1-1/+1
The variable netdev is being used in this function; remove the __always_unused attribute from it. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Refactor getting/setting coalesceBrett Creeley1-59/+93
Currently if the driver has an uneven amount of Rx/Tx queues setting the coalesce settings through ethtool will result in an error. This is happening because in the setting coalesce flow we are reporting an error if either Rx or Tx fails. Also, the flow for setting/getting per_q_coalesce and setting/getting coalesce settings for the entire device is different. Fix these issues by adding one function, ice_set_q_coalesce(), and another, ice_get_q_coalesce(), that both getting/setting per_q and entire device coalesce can use. This makes handling the error cases generic between the two flows and simplifies __ice_set_coalesce() and __ice_get_coalesce(). Also, add a header comment to __ice_set_coalesce(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-02ice: Add missing PHY type to link settingsTony Nguyen1-0/+1
The PHY type ICE_PHY_TYPE_LOW_25G_AUI_C2C is missing from ice_get_settings_link_up() which is causing a warning message for unrecognized PHY. Add the PHY type to correctly set the settings and avoid the warning message. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-02ice: Add ability to update rx-usecs-highBrett Creeley1-1/+30
Currently the driver allows rx-usecs-high values to be set, but when querying the device for rx-usecs-high the value does not stick. This is because it was not yet implemented. Add code to allow the user to change rx-usecs-high and use this to set the q_vector's intrl value. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Add code to control FW LLDP and DCBXAnirudh Venkataramanan1-1/+95
This patch adds code to start or stop LLDP and DCBX in firmware through use of ethtool private flags. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Add code to get DCB related statisticsAnirudh Venkataramanan1-2/+34
This patch adds a new function ice_update_dcb_stats to get DCB stats from the hardware and ethtool support for displaying these stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-18ice: Fix incorrect use of abbreviationsAnirudh Venkataramanan1-10/+10
Capitalize abbreviations and spell out some that aren't obvious. Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: fix some function prototype and signature style issuesBruce Allan1-10/+15
Put the return type on a separate line for function prototypes and signatures that would exceed the 80-character limit if both were on the same line. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19ice: use ice_for_each_vsi macro when possibleBrett Creeley1-2/+1
Replace all instances of: for (i = 0; i < pf->num_alloc_vsi; i++) with the following macro: ice_for_each_vsi(pf, i) This will allow the code to be consistent since there are currently cases of using both. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-25ice: fix overlong string, update stats outputJesse Brandeburg1-40/+40
A test started warning on a string truncation. This led to an unfortunate realization that we are likely not accounting for the stats length correctly before this patch, so fix the issue by putting "port." in front of all the PF stats, instead of magically prepending it at runtime. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-25ice: Fix for FC get rx/tx pause paramsLukasz Czapnik1-11/+26
Ethtool reported pause params based on the currently negotiated link settings instead of current PHY config. User was not able to turn off pause params because ethtool was incorrectly reporting parameters as off when link was down even though PHY was configured to support pause frames. Now pause params are taken from PHY config instead of link status. Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-25ice: sizeof(<type>) should be avoidedBruce Allan1-8/+7
With sizeof(), it is preferable to use the variable of type <type> instead of sizeof(<type>). There are multiple places where a temporary variable is used to hold a 'size' value which is then used for a subsequent alloc/memset. Get rid of the temporary variable by calculating size as part of the alloc/memset statement. Also remove unnecessary type-cast. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Add support for new PHY typesAnirudh Venkataramanan1-10/+252
This patch adds code for the detection and operation of several additional PHY types that support higher link speeds. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Allow for software timestampingTony Nguyen1-0/+1
Use ethtool_op_get_ts_info to provide software timestamping. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Implement getting and setting ethtool coalesceBrett Creeley1-0/+256
This patch includes the following ethtool operations: 1. get_coalesce 2. set_coalesce 3. get_per_q_coalesce 4. set_per_q_coalesce Each ITR value (current_itr/target_itr) are stored on a per ice_ring_container basis. This is because each valid ice_ring_container can have 1 or more rings that are tied to the same q_vector ITR index. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Add ethtool private flag to make forcing link down optionalBruce Allan1-0/+86
Add new infrastructure for implementing ethtool private flags using the existing pf->flags bitmap to store them, and add the link-down-on-close ethtool private flag to optionally bring down the PHY link when the interface is administratively downed. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.