aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)AuthorFilesLines
2016-10-31i40e: properly cleanup on allocation failure in i40e_sync_vsi_filtersJacob Keller1-17/+22
Currently, we fail to correctly restore filters on the temporary add list when we fail to allocate memory either for deletion or addition. Replace calls to "goto out;" with calls to a new location that correctly handles memory allocation failures. Note that it is safe for us to call i40e_undo_filter_entries on the tmp_del_list even after we've deleted filters because at this point it will be empty, so we don't need to separate the logic for add and delete failure. Change-Id: Iee107fd219c6e03e2fd9645c2debf8e8384a8521 Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-31i40e: store MAC/VLAN filters in a hash with the MAC Address as keyJacob Keller5-107/+161
Replace the mac_filter_list with a static size hash table of 8bits. The primary advantage of this is a decrease in latency of operations related to searching for specific MAC filters, including .set_rx_mode. Using a linked list resulted in several locations which were O(n^2). Using a hash table should give us latency growth closer to O(n*log(n)). Change-ID: I5330bd04053b880e670210933e35830b95948ebb Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]>
2016-10-31i40e: implement __i40e_del_filter and use where applicableJacob Keller1-33/+59
When inside a loop where we call i40e_del_filter we use an O(n^2) pattern where i40e_del_filter calls i40e_find_filter for us. We can avoid this O(n^2) logic by factoring a function, __i40e_del_filter() out from the i40e_del_filter code. This allows us to re-use the delete logic where appropriate without having to search for the filter twice. This new function benefits several functions including i40e_vsi_add_vlan, i40e_vsi_kill_vlan, i40e_del_mac_vlan_all, and i40e_vsi_release. Change-ID: I75fabe0f53bf73f56b80d342e5fdcfcc28f4d3eb Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-31i40e: When searching all MAC/VLAN filters, ignore removed filtersJacob Keller1-0/+6
When adding new MAC address filters, the driver determines if it should behave in VLAN mode (where all MAC addresses get assigned to every existing VLAN) or in non-VLAN mode where MAC addresses get assigned the VLAN_ANY identifier. Under some circumstances it is possible that a VLAN has been marked for removal (such that all filters of that VLAN are set to I40E_FILTER_REMOVE), and a subsequent call to i40e_put_mac_in_vlan may occur prior to the driver subtask that syncs filters to the hardware. In this case, we may add filters to the new removed VLAN, even though it should have been removed. This is most obvious when first adding a new VLAN. We will delete all filters which are in I40E_VLAN_ANY (-1) and then re-add them as in VLAN 0 (untagged). Then before we sync filters, we will add new MAC address filter, which will be added to every VLAN that exists. Unfortunately, this will include I40E_VLAN_ANY, so we will end up incorrectly adding filters to the -1 VLAN. This can be fixed by simply skipping all filters which are marked for removal. A similar check is not necessary in i40e_del_mac_all_vlan, since we are deleting, and any filter which we find already marked for removal would simply be deleted again, which doesn't cause any issues. Change-Id: I7962154013ce02fe950584690aeeb3ed853d0086 Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-31i40e: refactor i40e_put_mac_in_vlan to avoid changing f->vlanJacob Keller1-12/+13
When a PVID has been assigned to a VSI, the function i40e_put_mac_in_vlan arbitrarily modifies all filters to have the same VLAN. This is obviously incorrect because it could be modifying active filters without putting them into the NEW state. The correct method is to remove then re-add filters which is already done in the code where we assign the PVID. Fix this issue and a few other minor nits at the same time. First, when we have a PVID don't even bother looping and simply add the filter with the PVID immediately. In the case of the loop, we now can remove several checks. We also don't need to use i40e_find_filter first before calling i40e_add_filter, since i40e_add_filter implicitly does a lookup already. Finally, update the return semantics of this function so that on failure to add a filter it returns NULL, but on success, it returns the last filter added. Otherwise, we're just returning the last filter in the list. An alternative fix might be to return 0 or an error code, but this is pretty invasive to every call site. Change-ID: I2325dfd843aec76d89fb0d7cb0e7c4f290a34840 Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-31i40e: move i40e_put_mac_in_vlan and i40e_del_mac_all_vlanJacob Keller1-57/+56
A future patch will be modifying these functions and making a call to a static function which currently is defined after these functions. Move them in a separate patch to ease review and ensure the moved code is correct. Change-ID: I2ca7fd4e10c0c07ed2291db1ea41bf5987fc6474 Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-31i40e: make use of __dev_uc_sync and __dev_mc_syncJacob Keller2-54/+69
The kernel provides __dev_uc_sync and __dev_mc_sync in order for drivers which need individual notification of add and delete for each filter. These functions allow us to vastly simplify our .set_rx_mode handler. We need to implement two functions for sync and unsync which add and remove filters respectively. This change avoids a very complex and inefficient algorithm which resulted in an abnormal latency for the .set_rx_mode NDO operation. The resulting code after this change is more readable, more efficient, and less code. Due to the callback signature used by these functions we also must update several other functions to take a const u8 * pointer. Change-Id: I2ca7fd4e10c0c07ed2291db1ea41bf5987fc6474 Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-31i40e: drop is_vf and is_netdev fields in struct i40e_mac_filterJacob Keller5-272/+89
Originally the is_vf and is_netdev fields were added in order to distinguish between VF and netdev filters in a single VSI. However, it can be noted that we use separate VSI for SRIOV VFs and for netdev VSI. Thus, since a single VSI should only ever have one type of filter, we can simply remove the checks and remove the typing. In a similar fashion, we can note that the only remaining way to get multiple filters of a single type is through a debug command that was added to debugfs. This command is useless in practice, and results in causing bugs if we keep counter tracking but lose the is_vf and is_netdev protections as desired above. Since the only time we'd actually have a counter value besides 0 and 1 is through use of this debugfs hook, we can remove this unnecessary command, and the entire counter logic it required. We vastly simplify mac filters by removing (a) the distinction between VF and netdev filters (b) counting logic (c) the ability to add and remove filters bypassing the stack via debugfs Change-ID: Idf916dd2a1159b1188ddbab5bef6b85ea6bf27d9 Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-31i40e: Add missing \n to end of dev_err messageColin Ian King1-1/+1
Trival fix, dev_err message is missing a \n, so add it. Signed-off-by: Colin Ian King <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-28/+7
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <[email protected]>
2016-10-28i40e: Clean up handling of msglevel flags and debug parameterAlexander Duyck3-35/+14
So the i40e driver had a really convoluted configuration for how to handle the debug flags contained in msg_level. Part of the issue is that the driver has its own 32 bit mask that it was using to track a separate set of debug features. From what I can tell it was trying to use the upper 4 bits to determine if the value was meant to represent a bit-mask or the numeric value provided by debug level. What this patch does is clean this up by compressing those 4 bits into bit 31, as a result we just have to perform a check against the value being negative to determine if we are looking at a debug level (positive), or a debug mask (negative). The debug level will populate the msg_level, and the debug mask will populate the debug_mask in the hardware struct. I added similar logic for ethtool. If the value being provided has bit 31 set we assume the value being provided is a debug mask, otherwise we assume it is a msg_enable mask. For displaying we only provide the msg_enable, and if debug_mask is in use we will print it to the dmesg log. Lastly I removed the debugfs interface. It is redundant with what we already have in ethtool and really doesn't belong anyway. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Fix bit logic error in failure caseDavid Ertman1-1/+1
Patch a036244c0686 "i40e: Fix kernel panic on enable/disable LLDP" introduced an error in bit logic. Originally this bit manipulation was meant to clear two bits to indicate that DCB was not enabled or capable. An "&" was incorrectly used instead of an "|" bit operator to combine the two bitmasks into one. This also created a static checker error since the resultant code was a no-op. This patch fixes the error by using the correct bit-wise operator. Signed-off-by: Dave Ertman <[email protected]> Reported-by: Dan Carpenter <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e/i40evf: Changed version from 1.6.19 to 1.6.21Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Removal of workaround for simple MAC address filter deletionFilip Sadowski1-41/+0
This is code refactoring. This patch removes the workaround which deleted a default MAC filter added by the firmware when the interface was brought up. This filter caused frames to pass disregarding the VLAN tagging. It used to be automatically applied after reset in pre-SRA FW versions. This workaround is not needed in production NICs and hence can be removed. Change-ID: I129fe1aae1f17b5a224c9b29a996d916aa1be1ec Signed-off-by: Filip Sadowski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Fix for long link down notification timeCarolyn Wyborny1-1/+4
This patch fixes a problem where it could take a very long time (>100 msec) to print the link down notification. This problem is fixed by changing how often we update link info from fw, when link is down. Without this patch, it can take over 100msec to notify user link is down. Change-ID: Ib876eb30834c7080792becd13ee093b9cbb35d78 Signed-off-by: Carolyn Wyborny <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Drop redundant Rx descriptor processing codeAlexander Duyck1-12/+6
This patch cleans up several pieces of redundant code in the Rx clean-up paths. The first bit is that hdr_addr and the status_err_len portions of the Rx descriptor represent the same value. As such there is no point in setting them to 0 before setting them to 0. I'm dropping the second spot where we are updating the value to 0 so that we only have 1 write for this value instead of 2. The second piece is the checking for the DD bit in the packet. We only need to check for a non-zero value for the status_err_len because if the device is done with the descriptor it will have written something back and the DD is just one piece of it. In addition I have moved the reading of the Rx descriptor bits related to rx_ptype down so that they are actually below the dma_rmb() call so that we are guaranteed that we don't have any funky 64b on 32b calls causing any ordering issues. Change-ID: I256e44a025d3c64a7224aaaec37c852bfcb1871b Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: fix confusing dmesg info for ethtool -L optionLihong Yang1-2/+2
Ethtool -L option with the combined parameter is for changing the number of multi-purpose channels of the specified network device. The pre-set maximum for the combined channels is cpu dependent. Currently, for an i40e device, when the user sets a value between 64 and the maximum that the cpu can support for the combined parameter, the i40e driver displays the confusing info in dmesg to only show 64 as the RSS count regardless of what the accepted user input is as long as it is larger than 64. This patch fixes the message in the i40e driver when the user uses ethtool -L to change the number of the combined channels to consistently display the user requested value if it is valid and accepted by ethtool. Change-ID: Ia80a68bc844b779a49e0f76e7d3dcc915032d9af Signed-off-by: Lihong Yang <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Make struct i40e_stats constJoe Perches1-1/+1
Move some data to text $ size drivers/net/ethernet/intel/i40e/i40e_ethtool.o* text data bss dec hex filename 25012 0 32 25044 61d4 drivers/net/ethernet/intel/i40e/i40e_ethtool.o.new 22868 2120 32 25020 61bc drivers/net/ethernet/intel/i40e/i40e_ethtool.o.old Signed-off-by: Joe Perches <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e/i40evf: Changed version from 1.6.16 to 1.6.19Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e/i40evf: fix interrupt affinity bugAlan Brady3-21/+81
There exists a bug in which a 'perfect storm' can occur and cause interrupts to fail to be correctly affinitized. This causes unexpected behavior and has a substantial impact on performance when it happens. The bug occurs if there is heavy traffic, any number of CPUs that have an i40e interrupt are pegged at 100%, and the interrupt afffinity for those CPUs is changed. Instead of moving to the new CPU, the interrupt continues to be polled while there is heavy traffic. The bug is most readily realized as the driver is first brought up and all interrupts start on CPU0. If there is heavy traffic and the interrupt starts polling before the interrupt is affinitized, the interrupt will be stuck on CPU0 until traffic stops. The bug, however, can also be wrought out more simply by affinitizing all the interrupts to a single CPU and then attempting to move any of those interrupts off while there is heavy traffic. This patch fixes the bug by registering for update notifications from the kernel when the interrupt affinity changes. When that fires, we cache the intended affinity mask. Then, while polling, if the cpu is pegged at 100% and we failed to clean the rings, we check to make sure we have the correct affinity and stop polling if we're firing on the wrong CPU. When the kernel successfully moves the interrupt, it will start polling on the correct CPU. The performance impact is minimal since the only time this section gets executed is when performance is already compromised by the CPU. Change-ID: I4410a880159b9dba1f8297aa72bef36dca34e830 Signed-off-by: Alan Brady <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: group base mode VF offload flagsPreethi Banala1-0/+4
Group together the minimum set of offload capabilities that are always supported by VF in base mode. This define would be used by PF to make sure VF in base mode gets minimum of base capabilities . Change-ID: Id5e8f22ba169c8f0a38d22fc36b2cb531c02582c Signed-off-by: Preethi Banala <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: reopen client after resetMitch Williams2-32/+17
Allow the client interface to reopen existing clients if they were closed. This allows clients to recover from reset, which is essential for supporting VF RDMA. In one instance, the driver was not clearing the open bit when the client was closed. Add the code to clear this bit so that the state is accurate and the driver will not attempt to reopen already-open clients. Remove the ref_cnt variable; it was just getting in the way and was not being used consistently. Change-ID: Ic71af4553b096963ac0c56a997f887c9a4ed162d Signed-off-by: Mitch Williams <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Drop code for unsupported flow typesAlexander Duyck1-26/+5
We cannot currently support SCTP in the hardware, and IPV4_FLOW is not used anywhere by the software so we can go through and drop the functionality related to these two flow types. In addition we cannot support masking based on the protocol value so if the user is expecting a value other than TCP or UDP we should simply return an error rather then trying to allocate a filter for a rule that will only partially match what the user requested. Change-ID: I10d52bb97d8104d76255fe244551814ff9531a63 Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Remove unused function i40e_vsi_lookupAlexander Duyck2-33/+0
The function is not used so there is no need to carry it forward. I have plans to add a slightly different function that can be inlined to handle the same kind of functionality. Change-ID: Ie2dfcb189dc75e5fbc156bac23003e3b4210ae0f Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Bit test mask correctionFilip Sadowski1-1/+1
Incorrect bit mask was used for testing "get link status" response. Instead of I40E_AQ_LSE_ENABLE (which is actually 0x03) it most probably should be I40E_AQ_LSE_IS_ENABLED (which is defined as 0x01). Change-ID: Ia199142906720507f847de3a33a25c61a9781b2f Signed-off-by: Filip Sadowski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Rewrite Flow Director busy wait loopAlexander Duyck1-9/+4
We can reorder the busy wait loop at the start of the Flow Director transmit function to reduce the overall code size while still retaining the same functionality. As such I am taking advantage of the opportunity to do so. Change-ID: I34c403ca001953c6ac9816e65d5305e73d869026 Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-28i40e: Fix client interactionCarolyn Wyborny1-16/+13
This patch fixes a problem in the client interface that was causing random stack traces in RDMA driver load and unload tests. This patch fixes the problem by checking for an existing client before trying to open it. Without this patch, there is a timing related null pointer deref. Change-ID: Ib73d30671a27f6f9770dd53b3e5292b88d6b62da Signed-off-by: Carolyn Wyborny <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-27i40e: fix call of ndo_dflt_bridge_getlink()Huaibin Wang1-1/+1
Order of arguments is wrong. The wrong code has been introduced by commit 7d4f8d871ab1, but is compiled only since commit 9df70b66418e. Note that this may break netlink dumps. Fixes: 9df70b66418e ("i40e: Remove incorrect #ifdef's") Fixes: 7d4f8d871ab1 ("switchdev; add VLAN support for port's bridge_getlink") CC: Carolyn Wyborny <[email protected]> Signed-off-by: Huaibin Wang <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-27i40e: disable MSI-X interrupts if we cannot reserve enough vectorsGuilherme G Piccoli1-0/+1
If we fail on allocating enough MSI-X interrupts, we should disable them since they were previously enabled in this point of code. Not disabling them can lead to WARN_ON() being triggered and subsequent failure in enabling MSI as a fallback; the below message was shown without this patch while we played with interrupt allocation in i40e driver: [ 21.461346] sysfs: cannot create duplicate filename '/devices/pci0007:00/0007:00:00.0/0007:01:00.3/msi_irqs' [ 21.461459] ------------[ cut here ]------------ [ 21.461514] WARNING: CPU: 64 PID: 1155 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x88/0xc0 Also, we noticed that without this patch, if we modprobe the module without enough MSI-X interrupts (triggering the above warning), unload the module and re-load it again, we got a crash on the system. Signed-off-by: Guilherme G Piccoli <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-27i40e: Fix configure TCs after initial DCB disableDavid Ertman2-27/+5
in commit a036244c068612a43fa8c0f33a0eb4daa4d8dba0 a fix was put into place to avoid a kernel panic when a non- supported traffic class configuration was put into place and then lldp was enabled/disabled on the link partner switch. This fix caused it to be necessary to unload/reload the driver to reenable DCB once a supported TC config was in place. The root cause of the original panic was that the function i40e_pf_get_default_tc was allowing for a default TC other than TC 0, and only TC 0 is supported as a default. This patch removes the get_default_tc function and replaces it with a #define since there is only one TC supported as a default. Change-Id: I448371974e946386d0a7718d73668b450b7c72ef Signed-off-by: Dave Ertman <[email protected]> Tested-by: Ronald Bynoe <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-18ethernet/intel: use core min/max MTU checkingJarod Wilson1-5/+5
e100: min_mtu 68, max_mtu 1500 - remove e100_change_mtu entirely, is identical to old eth_change_mtu, and no longer serves a purpose. No need to set min_mtu or max_mtu explicitly, as ether_setup() will already set them to 68 and 1500. e1000: min_mtu 46, max_mtu 16110 e1000e: min_mtu 68, max_mtu varies based on adapter fm10k: min_mtu 68, max_mtu 15342 - remove fm10k_change_mtu entirely, does nothing now i40e: min_mtu 68, max_mtu 9706 i40evf: min_mtu 68, max_mtu 9706 igb: min_mtu 68, max_mtu 9216 - There are two different "max" frame sizes claimed and both checked in the driver, the larger value wasn't relevant though, so I've set max_mtu to the smaller of the two values here to retain identical behavior. igbvf: min_mtu 68, max_mtu 9216 - Same issue as igb duplicated ixgb: min_mtu 68, max_mtu 16114 - Also remove pointless old == new check, as that's done in dev_set_mtu ixgbe: min_mtu 68, max_mtu 9710 ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware - Some hw can only handle up to max_mtu 1504 on a vf, others 9710 CC: [email protected] CC: [email protected] CC: Jeff Kirsher <[email protected]> Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-10-03i40e: avoid NULL pointer dereference and recursive errors on early PCI errorGuilherme G Piccoli1-0/+6
Although rare, it's possible to hit PCI error early on device probe, meaning possibly some structs are not entirely initialized, and some might even be completely uninitialized, leading to NULL pointer dereference. The i40e driver currently presents a "bad" behavior if device hits such early PCI error: firstly, the struct i40e_pf might not be attached to pci_dev yet, leading to a NULL pointer dereference on access to pf->state. Even checking if the struct is NULL and avoiding the access in that case isn't enough, since the driver cannot recover from PCI error that early; in our experiments we saw multiple failures on kernel log, like: [549.664] i40e 0007:01:00.1: Initial pf_reset failed: -15 [549.664] i40e: probe of 0007:01:00.1 failed with error -15 [...] [871.644] i40e 0007:01:00.1: The driver for the device stopped because the device firmware failed to init. Try updating your NVM image. [871.644] i40e: probe of 0007:01:00.1 failed with error -32 [...] [872.516] i40e 0007:01:00.0: ARQ: Unknown event 0x0000 ignored Between the first probe failure (error -15) and the second (error -32) another PCI error happened due to the first bad probe. Also, driver started to flood console with those ARQ event messages. This patch will prevent these issues by allowing error recovery mechanism to remove the failed device from the system instead of trying to recover from early PCI errors during device probe. CC: <[email protected]> Signed-off-by: Guilherme G Piccoli <[email protected]> Acked-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-10-03i40e: fix sideband flow director vector allocationStefan Assmann1-2/+9
Currently if the MSI-X vector limit is reached the sideband flow director gets disabled. A bit too early to make that decision, as vectors may get re-distributed. So move the check further back. Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-03i40e: fix MSI-X vector redistribution if hw limit is reachedStefan Assmann1-16/+22
The driver allocates 1 vector per CPU thread and the current hardware limit for vectors is 129 per PF. On systems with 128 or more threads this currently means all vectors are used by the PF leaving no room for additional features like VMDq, iWARP, etc... The code that should redistribute the vectors in this case is broken and never triggers. Fixed the code so that it actually triggers if the hardware limit is reached and adjust the number of queue pairs accordingly. Also the number of initially requested iWARP vectors was not properly saved when the vector limit was reached, and therefore always zero. Comparison with debug statement. Before: i40e 0000:2d:00.0: VMDq disabled, not enough MSI-X vectors i40e 0000:2d:00.0: IWARP disabled, not enough MSI-X vectors i40e 00.0 MSI-X vector distribution: PF 128, VMDq 0, FDSB 0, iWARP 0 After: i40e 0000:2d:00.0: MSI-X vector limit reached, attempting to redistribute vectors i40e 00.0 MSI-X vector distribution: PF 78, VMDq 8, FDSB 0, iWARP 42 Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-10-03i40e: check if vectors are already depleted when doing VMDq allocationStefan Assmann1-11/+16
During MSI-X vector allocation for VMDq, a check for "no vectors left" was missing, add it. This prevents more vectors to be allocated than available. Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40evf: support queue-specific settings for interrupt moderationJacob Keller2-8/+85
In commit a75e8005d506f3 ("i40e: queue-specific settings for interrupt moderation") the i40e driver gained support for setting interrupt moderation values per queue. This patch adds support for this feature to the i40evf driver as well. In addition, a few changes are made to the i40e implementation to add function header documentation comments, as well. This behaves in a similar fashion to the implementation in i40e. Thus, requesting the moderation value when no queue is provided will report queue 0 value, while setting the value without a queue will set all queues at once. Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: don't configure zero-size RSS tableMitch Williams1-0/+2
In some rare cases, we might get a VSI with no queues. In this case, we cannot configure RSS on this VSI as it will try to divide by zero when configuring the lookup table. Change-ID: I6ae173a7dd3481a081e079eb10eb80275de2adb0 Signed-off-by: Mitch Williams <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: Strip out debugfs hook for Flow Director filter programmingAlexander Duyck3-84/+3
This interface was only ever meant for debug only. Since it is not supposed to be here we are removing it. Change-ID: Id771a1e5e7d3e2b4b7f56591b61fb48c921e1d04 Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: Split Flow Director descriptor config into separate functionAlexander Duyck1-51/+64
In an effort to improve code readability I am splitting the Flow Director filter configuration out into a separate function like we have done for the standard xmit path. The general idea is to provide a single block of code that translates the flow specification into a proper Flow Director descriptor. Change-ID: Id355ad8030c4e6c72c57504fa09de60c976a8ffe Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e/i40evf: Add txring_txq function to match fm10k and ixgbeAlexander Duyck2-11/+15
This patch adds a txring_txq function which allows us to convert a i40e_ring/i40evf_ring to a netdev_tx_queue structure. This way we can avoid having to make a multi-line function call for all the spots that need access to this. Change-ID: Ic063b71d8b92ea406d2c32e798c8e2b02809d65b Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: Fix Flow Director raw_buf cleanupAlexander Duyck1-4/+4
The Tx cleanup flow was incorrectly assuming it could check for the flow director bits after it had unmapped the buffer. However in this case it results in us trying to free a raw_buf as though it is an sk_buff. To fix this I am moving up the flag test for the FD_SB bit so that when find a non-NULL skb or raw_buf value we then check the flag and use the appropriate call to free the buffer. Change-ID: I6284034ba1ea87c9922e56f6eb3181f7f09bddde Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: Increase minimum number of allocated VSIAkeem Abodunrin1-1/+1
This patch increases minimum number of allocated VSIs, so as to resolve failure adding VSI for VF when 64-VFs assigned to a PF. The driver supports up to 128 VFs per device, users can decide to enable up to 64-VFs on a single PF, especially 2 X 40 devices. In that scenario, with VMDq co-existence, there would be starvation of VSIs - with this patch, supported features would have enough VSIs for configuration now. Change-ID: If084f4cd823667af8fe7fdc11489c705b32039d5 Signed-off-by: Akeem Abodunrin <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e/i40evf: Changed version to 1.6.16Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: removing unreachable codeHenry Tieman1-5/+1
The return value from i40e_shutdown_adminq() is always 0 (I40E_SUCCESS). So, the test for non-0 will never be true. Cleanup by removing the test and debug print statement. Change-ID: Ie51e8e37515c3e3a6a9ff26fa951d0e5e24343c1 Signed-off-by: Henry Tieman <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: check conflicting ntuple/sideband rules when re-enabling ATRJacob Keller1-3/+7
In i40e_fdir_check_and_reenable(), the driver performs some checks to determine whether it is safe to re-enable FD Sideband and FD ATR support. The current check will only determine if there is available space in the flow director table. However, this ignores the fact that ATR should be disabled when there are TCP/IPv4 sideband rules in effect. Add the missing check, and update the info message printed when I40E_DEBUG_FD is enabled. Change-ID: Ibb9c63e5be95d63c53a498fdd5dbf69f54a00e08 Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: cleanup ATR auto_disable_flags useJacob Keller3-20/+17
Some locations that disable ATR accidentally used the "full" disable by disabling the flag in the standard flags field. This incorrectly forces ATR off permanently instead of temporarily disabling it. In addition, some code locations accidentally set the ATR flag enabled when they only meant to clear the auto_disable_flags. This results in ignoring the user's ethtool private flag settings. Additionally, when disabling ATR via ethtool, we did not perform a flush of the FD table. This results in the previously assigned ATR rules still functioning which was not expected. Cleanup all these areas so that automatic disable uses only the auto_disable_flag. Fix the flush code so that we can trigger a flush even when we've disabled ATR and SB support, as otherwise the flush doesn't work. Fix ethtool setting to actually request a flush. Fix NETIF_F_NTUPLE flag to only clear the auto_disable setting and not enable the full feature. Change-ID: Ib2486111f8031bd16943e9308757b276305c03b5 Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: add encap csum VF offload flagPreethi Banala1-0/+1
Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum offload for encapsulated packets is supported by default. Going forward, this feature needs to be negotiated with PF before advertising to the stack. Hence, we need a flag to control it. This is in regards to prepping up for VF base mode functionality support. Change-ID: Iaab1f25cc0abda5f2fbe3309092640f0e77d163e Signed-off-by: Preethi Banala <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: fix deleting mac filtersAlan Brady1-2/+2
There exists a bug in which deleting a mac filter does not actually occur. The driver reports that the filter has been deleted with no error. The problem occurs because the wrong cmd_flag is passed to the firmware when deleting the filter. The firmware reports an error back to the driver but it is expressly ignored. This fixes the bug by using the correct flag when deleting a filter. Without this patch, deleted filters remain in firmware and function as if they had not been deleted. Change-ID: I5f22b874f3b83f457702f18f0d5602ca21ac40c3 Signed-off-by: Alan Brady <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24i40e: Remove 100 Mbps SGMII support for X722Harshitha Ramamurthy1-1/+0
This patch fixes the problem where driver shows 100 Mbps as a supported speed, and allows it to be configured for advertising on X722 devices. This patch fixes the problem by not setting the 100 Mbps SGMII flag for X722 devices. Without this patch, the user incorrectly thinks that 100 Mbps is supported and hence might try to advertise it on X722 devices when it is actually not a supported speed. Change-ID: I8c3d7c4251a9402d98994ed29749b7b895a0f205 Signed-off-by: Harshitha Ramamurthy <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-24Merge branch '40GbE' of ↵David S. Miller6-21/+34
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-09-22 This series contains updates to i40e and i40evf only. Sridhar fixes link state event handling by updating the carrier and starts/stops the Tx queues based on the link state notification from PF. Brady fixes an issue where a user defined RSS hash key was not being set because a user defined indirection table is not supplied when changing the hash key, so if an indirection table is not supplied now, then a default one is created and the hash key is correctly set. Also fixed an issue where when NPAR was enabled, we were still using pf->mac_seid to perform the dump port query. Instead, go through the VSI to determine the correct ID to use in either case. Mitch provides one fix where a conditional return code was reversed, so he does a "switheroo" to fix the issue. Carolyn has two fixes, first fixes an issue in the virt channel code, where a return code was not checked for NULL when applicable. Second, fixes an issue where we were byte swapping the port parameter, then byte swapping it again in function execution. Colin Ian King fixes a potential NULL pointer dereference. Bimmy changes up i40evf_up_complete() to be void since it always returns success anyways, which allows cleaning up of code which checked the return code from this function. Alex fixed an issue where the driver was incorrectly assuming that we would always be pulling no more than 1 descriptor from each fragment. So to correct this, we just need to make certain to test all the way to the end of the fragments as it is possible for us to span 2 descriptors in the block before us so we need to guarantee that even the last 6 descriptors have enough data to fill a full frame. v2: dropped patches 1-3, 10 and 12 from the original series since Or Gerlitz pointed out several areas of improvement in the implementation of the VF Port representor netdev. Sridhar is re-working the series for later submission. ==================== Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.