aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)AuthorFilesLines
2020-10-13i40e: Allow changing FEC settings on X722 if supported by FWJaroslaw Gawin5-12/+49
Starting with API version 1.10 firmware for X722 devices has ability to change FEC settings in PHY. Code added in this patch allows changing FEC settings if the capability flag indicates the device supports this feature. Signed-off-by: Jaroslaw Gawin <[email protected]> Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-09-29net: intel: Remove in_interrupt() warningsSebastian Andrzej Siewior1-4/+0
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the checks cover only parts of the contexts in which these functions cannot be called. They fail to detect preemption or interrupt disabled invocations. As the functions which are invoked from the various places contain already a broad variety of checks (always enabled or debug option dependent) cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-28i40e: convert to new udp_tunnel infrastructureJakub Kicinski2-219/+51
Make use of the "shared port table" to convert i40e to the new infra. i40e did not have any reference tracking, locking is also dodgy because rtnl gets released while talking to FW, so port may get removed from the table while it's getting added etc. On the good side i40e does not seem to be using the ports for TX so we can remove the table from the driver state completely. Signed-off-by: Jakub Kicinski <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-25intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg10-26/+27
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-6/+16
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <[email protected]>
2020-09-14i40e, xsk: move buffer allocation out of the Rx processing loopBjörn Töpel1-8/+4
Instead of checking in each iteration of the Rx packet processing loop, move the allocation out of the loop and do it once for each napi activation. For AF_XDP the rx_drop benchmark was improved by 6%. Signed-off-by: Björn Töpel <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-14i40e: use 16B HW descriptors instead of 32BBjörn Töpel7-17/+18
The i40e NIC supports two flavors of HW descriptors, 16 and 32 byte. The latter has, obviously, room for more offloading information. However, the only fields of the 32B HW descriptor that is being used by the driver, is also available in the 16B descriptor. In other words; Reading and writing 32 bytes instead of 16 byte is a waste of bus bandwidth. This commit starts using 16 byte descriptors instead of 32 byte descriptors. For AF_XDP the rx_drop benchmark was improved by 2%. Signed-off-by: Björn Töpel <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-14i40e, xsk: remove HW descriptor prefetch in AF_XDP pathBjörn Töpel3-13/+25
The software prefetching of HW descriptors has a negative impact on the performance. Therefore, it is now removed. Performance for the rx_drop benchmark increased with 2%. Signed-off-by: Björn Töpel <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-14i40e: optimise prefetch page refcountLi RongQing1-1/+1
refcount of rx_buffer page will be added here originally, so prefetchw is needed, but after commit 1793668c3b8c ("i40e/i40evf: Update code to better handle incrementing page count"), and refcount is not added every time, so change prefetchw as prefetch. Now it mainly services page_address(), but which accesses struct page only when WANT_PAGE_VIRTUAL or HASHED_PAGE_VIRTUAL is defined otherwise it returns address based on offset, so we prefetch it conditionally. Jakub suggested to define prefetch_page_address in a common header. Reported-by: kernel test robot <[email protected]> Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Li RongQing <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-14i40e: not compute affinity_mask for IRQLi RongQing1-9/+3
After commit 759dc4a7e605 ("i40e: initialize our affinity_mask based on cpu_possible_mask"), NAPI IRQ affinity_mask is bind to all possible CPUs, not a fixed CPU Signed-off-by: Li RongQing <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-09i40e: always propagate error value in i40e_set_vsi_promisc()Stefan Assmann1-1/+11
The for loop in i40e_set_vsi_promisc() reports errors via dev_err() but does not propagate the error up the call chain. Instead it continues the loop and potentially overwrites the reported error value. This results in the error being recorded in the log buffer, but the caller might never know anything went the wrong way. To avoid this situation i40e_set_vsi_promisc() needs to temporarily store the error after reporting it. This is still not optimal as multiple different errors may occur, so store the first error and hope that's the main issue. Fixes: 37d318d7805f (i40e: Remove scheduling while atomic possibility) Reported-by: Michal Schmidt <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-09i40e: fix return of uninitialized aq_ret in i40e_set_vsi_promiscStefan Assmann1-5/+5
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function ‘i40e_set_vsi_promisc’: drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1176:14: error: ‘aq_ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] i40e_status aq_ret; In case the code inside the if statement and the for loop does not get executed aq_ret will be uninitialized when the variable gets returned at the end of the function. Avoid this by changing num_vlans from int to u16, so aq_ret always gets set. Making this change in additional places as num_vlans should never be negative. Fixes: 37d318d7805f ("i40e: Remove scheduling while atomic possibility") Signed-off-by: Stefan Assmann <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller6-61/+67
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-09-01 The following pull-request contains BPF updates for your *net-next* tree. There are two small conflicts when pulling, resolve as follows: 1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120282b ("libbpf: Factor out common ELF operations and improve logging") in bpf-next and 1e891e513e16 ("libbpf: Fix map index used in error message") in net-next. Resolve by taking the hunk in bpf-next: [...] scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx); data = elf_sec_data(obj, scn); if (!scn || !data) { pr_warn("elf: failed to get %s map definitions for %s\n", MAPS_ELF_SEC, obj->path); return -EINVAL; } [...] 2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between 9647c57b11e5 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better performance") in bpf-next and e20f0dbf204f ("net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like: [...] xdp_set_data_meta_invalid(xdp); xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool); net_prefetch(xdp->data); [...] We've added 133 non-merge commits during the last 14 day(s) which contain a total of 246 files changed, 13832 insertions(+), 3105 deletions(-). The main changes are: 1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper for tracing to reliably access user memory, from Alexei Starovoitov. 2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau. 3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa. 4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson. 5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko. 6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh. 7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer. 8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song. 9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant. 10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee. 11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua. 12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski. 13) Various smaller cleanups and improvements all over the place. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better ↵Magnus Karlsson1-1/+1
performance Test for dma_need_sync earlier to increase performance. xsk_buff_dma_sync_for_cpu() takes an xdp_buff as parameter and from that the xsk_buff_pool reference is dug out. Perf shows that this dereference causes a lot of cache misses. But as the buffer pool is now sent down to the driver at zero-copy initialization time, we might as well use this pointer directly, instead of going via the xsk_buff and we can do so already in xsk_buff_dma_sync_for_cpu() instead of in xp_dma_sync_for_cpu. This gets rid of these cache misses. Throughput increases with 3% for the xdpsock l2fwd sample application on my machine. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Rename xsk zero-copy driver interfacesMagnus Karlsson2-21/+19
Rename the AF_XDP zero-copy driver interface functions to better reflect what they do after the replacement of umems with buffer pools in the previous commit. Mostly it is about replacing the umem name from the function names with xsk_buff and also have them take the a buffer pool pointer instead of a umem. The various ring functions have also been renamed in the process so that they have the same naming convention as the internal functions in xsk_queue.h. This so that it will be clearer what they do and also for consistency. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Pass buffer pool to driver instead of umemMagnus Karlsson6-60/+68
Replace the explicit umem reference passed to the driver in AF_XDP zero-copy mode with the buffer pool instead. This in preparation for extending the functionality of the zero-copy mode so that umems can be shared between queues on the same netdev and also between netdevs. In this commit, only an umem reference has been added to the buffer pool struct. But later commits will add other entities to it. These are going to be entities that are different between different queue ids and netdevs even though the umem is shared between them. Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-08-26net: Take common prefetch code structure into a functionTariq Toukan1-8/+4
Many device drivers use the same prefetch code structure to deal with small L1 cacheline size. Take this code into a function and call it from the drivers. Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-14i40e: Fix crash during removing i40e driverGrzegorz Szczurek1-0/+3
Fix the reason of crashing system by add waiting time to finish reset recovery process before starting remove driver procedure. Now VSI is releasing if VSI is not in reset recovery mode. Without this fix it was possible to start remove driver if other processing command need reset recovery procedure which resulted in null pointer dereference. VSI used by the ethtool process has been cleared by remove driver process. [ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 6731.508668] #PF: supervisor read access in kernel mode [ 6731.508670] #PF: error_code(0x0000) - not-present page [ 6731.508671] PGD 0 P4D 0 [ 6731.508674] Oops: 0000 [#1] SMP PTI [ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017 [ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e] [ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83 [ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246 [ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007 [ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780 [ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004 [ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000 [ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000 [ 6731.508708] FS: 00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000 [ 6731.508710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0 [ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6731.508715] Call Trace: [ 6731.508734] i40e_vsi_close+0x84/0x90 [i40e] [ 6731.508742] i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e] [ 6731.508749] i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e] [ 6731.508757] i40e_prep_for_reset+0x59/0x130 [i40e] [ 6731.508765] i40e_reconfig_rss_queues+0x5a/0x120 [i40e] [ 6731.508774] i40e_set_channels+0xda/0x170 [i40e] [ 6731.508778] ethtool_set_channels+0xe9/0x150 [ 6731.508781] dev_ethtool+0x1b94/0x2920 [ 6731.508805] dev_ioctl+0xc2/0x590 [ 6731.508811] sock_do_ioctl+0xae/0x150 [ 6731.508813] sock_ioctl+0x34f/0x3c0 [ 6731.508821] ksys_ioctl+0x98/0xb0 [ 6731.508828] __x64_sys_ioctl+0x1a/0x20 [ 6731.508831] do_syscall_64+0x57/0x1c0 [ 6731.508835] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4b8164467b85 ("i40e: Add common function for finding VSI by type") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-08-14i40e: Set RX_ONLY mode for unicast promiscuous on VLANPrzemyslaw Patynowski2-9/+28
Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs. Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN. Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support") Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko1-3/+0
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-07-07PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'Luc Van Oostenryck1-1/+1
The method struct pci_error_handlers.error_detected() is defined and documented as taking an 'enum pci_channel_state' for the second argument, but most drivers use 'pci_channel_state_t' instead. This 'pci_channel_state_t' is not a typedef for the enum but a typedef for a bitwise type in order to have better/stricter typechecking. Consolidate everything by using 'pci_channel_state_t' in the method's definition, in the related helpers and in the drivers. Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state' with an anonymous 'enum'. Note: Currently, from a typechecking point of view this patch changes nothing because only the constants defined by the enum are bitwise, not the enum itself (sparse doesn't have the notion of 'bitwise enum'). This may change in some not too far future, hence the patch. [bhelgaas: squash in https://lore.kernel.org/r/[email protected] https://lore.kernel.org/r/[email protected]] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Luc Van Oostenryck <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-07-01i40e: introduce new dump desc XDP commandCiara Loftus1-11/+48
Interfaces already exist for dumping Rx and Tx descriptor information. Introduce another for doing the same for XDP descriptors. Signed-off-by: Ciara Loftus <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01i40e: add XDP ring statistics to dump VSI debug outputCiara Loftus1-0/+41
Prior to this, only the Rx and Tx ring statistics were dumped. The XDP ring statistics are now dumped as well. Signed-off-by: Ciara Loftus <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01i40e: add XDP ring statistics to VSI statsCiara Loftus1-0/+19
Prior to this, only Rx and Tx ring statistics were accounted for. Signed-off-by: Ciara Loftus <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01i40e: move check of full Tx ring to outside of send loopMagnus Karlsson1-15/+5
Move the check if the HW Tx ring is full to outside the send loop. Currently it is checked for every single descriptor that we send. Instead, tell the send loop to only process a maximum number of packets equal to the number of available slots in the Tx ring. This way, we can remove the check inside the send loop to and gain some performance. Suggested-by: Sridhar Samudrala <[email protected]> Signed-off-by: Magnus Karlsson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01i40e: eliminate division in napi_poll data pathMagnus Karlsson1-4/+10
Eliminate a division in the napi_poll data path. This division is executed even though it is only needed in the rare case when there are not enough interrupt lines so they have to be shared between queue pairs. Instead, just test for this case and only execute the division if needed. The code has been lifted from the ice driver. Signed-off-by: Magnus Karlsson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01i40e: optimize AF_XDP Tx completion pathMagnus Karlsson4-23/+27
Improve the performance of the AF_XDP zero-copy Tx completion path. When there are no XDP buffers being sent using XDP_TX or XDP_REDIRECT, we do not have go through the SW ring to clean up any entries since the AF_XDP path does not use these. In these cases, just fast forward the next-to-use counter and skip going through the SW ring. The limit on the maximum number of entries to complete is also removed since the algorithm is now O(1). To simplify the code path, the maximum number of entries to complete for the XDP path is therefore also increased from 256 to 512 (the default number of Tx HW descriptors). This should be fine since the completion in the XDP path is faster than in the SKB path that has 256 as the maximum number. This patch provides around 4% throughput improvement for the l2fwd application in xdpsock on my machine. Signed-off-by: Magnus Karlsson <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01i40e: Add support for a new feature Total Port ShutdownArkadiusz Kubalewski4-21/+133
After OS requests to down a link on a physical network port, the traffic is no longer being processed but the physical link with a link partner is still established. Currently there is a feature (Link down on close) which allows to physically bring the link down (after OS request). With this patch new feature with similar capability is introduced: TOTAL_PORT_SHUTDOWN Allows to physically disable the link on the NIC's port. If enabled, (after link down request from the OS) no link, traffic or led activity is possible on that port. If I40E_FLAG_TOTAL_PORT_SHUTDOWN is enabled, the I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED must be explicitly forced to true and cannot be disabled at that time. The functionalities are exclusive in terms of configuration, but they also have similar behavior (allowing to disable physical link of the port), with following differences: - LINK_DOWN_ON_CLOSE_ENABLED is configurable at host OS run-time and is supported by whole family of 7xx Intel Ethernet Controllers - TOTAL_PORT_SHUTDOWN may be enabled only before OS loads (in BIOS) only if motherboard's BIOS and NIC's FW has support of it - when LINK_DOWN_ON_CLOSE_ENABLED is used, the link is being brought down by sending phy_type=0 to NIC's FW - when TOTAL_PORT_SHUTDOWN is used, phy_type is not altered, instead the link is being brought down by clearing bit (I40E_AQ_PHY_ENABLE_LINK) in abilities field of i40e_aq_set_phy_config structure Introduced changes: - new private flag I40E_FLAG_TOTAL_PORT_SHUTDOWN for handling the feature - probe of NVM if the feature was enabled at driver's port initialization - special handling on link-down procedure to let FW physically shutdown the port if the feature was enabled Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Aleksandr Loktionov <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher6-12/+10
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-06-26Merge branch '40GbE' of ↵David S. Miller17-5663/+222
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2020-06-25 This series contains updates to i40e driver and removes the individual driver versions from all of the Intel wired LAN drivers. Shiraz moves the client header so that it can easily be shared between the i40e LAN driver and i40iw RDMA driver. Jesse cleans up the unused defines, since they are just dead weight. Alek reduces the unreasonably long wait time for a PF reset after reboot by using jiffies to limit the maximum wait time for the PF reset to succeed. Added additional logging to let the user know when the driver transitions into recovery mode. Adds new device support for our 5 Gbps NICs. Todd adds a check to see if MFS is set after warm reboot and notifies the user when MFS is set to anything lower than the default value. Arkadiusz fixes a possible race condition, where were holding a spin-lock while in atomic context. v2: removed code comments that were no longer applicable in patch 2 of the series. Also removed 'inline' from patch 4 and patch 8 of the series. Also re-arranged code to be able to remove the forward function declarations. Dropped patch 9 of the series, while the author works on cleaning up the commit message. v3: Updated patch 8 description to answer Jakub's questions ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-25i40e: Remove scheduling while atomic possibilityAleksandr Loktionov1-97/+137
In some occasions task held spinlock (mac_filter_hash_lock), while being rescheduled due to admin queue mutex_lock. The struct i40e_spinlock asq_spinlock, which later expands to struct mutex spinlock. Moved i40e_aq_set_vsi_multicast_promiscuous(), i40e_aq_set_vsi_unicast_promiscuous(), i40e_aq_set_vsi_mc_promisc_on_vlan(), and i40e_aq_set_vsi_uc_promisc_on_vlan() outside of atomic context. Without this patch there is a race condition, which might result in scheduling while in atomic context. The race condition is between the thread, which holds mac_filter_hash_lock, while trying to acquire an admin queue mutex and a thread, which already has said admin queue mutex. The thread, which holds spinlock, fails to acquire the mutex, which causes this thread to sleep. Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Aleksandr Loktionov <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-25i40e: Add support for 5Gbps cardsAleksandr Loktionov2-1/+6
Make possible for the i40e driver to bind to the new v710 for 5GBASE-T NICs. Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher3-19/+6
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <[email protected]> CC: Jesse Brandeburg <[email protected]> CC: Alek Loktionov <[email protected]> CC: Kevin Liedtke <[email protected]> CC: Aaron Rowden <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Co-developed-by: Jacob Keller <[email protected]> Tested-by: Aaron Brown <[email protected]>
2020-06-25i40e: Add a check to see if MFS is setTodd Fujinaka1-0/+8
A customer was chain-booting to provision his systems and one of the steps was setting MFS. MFS isn't cleared by normal warm reboots (clearing requires a GLOBR) and there was no indication of why Jumbo Frame receives were failing. Add a warning if MFS is set to anything lower than the default. Signed-off-by: Todd Fujinaka <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-25i40e: detect and log info about pre-recovery modePiotr Kwapulinski2-22/+52
Detect and log information about pre-recovery mode when firmware transitions to a recovery mode. When a firmware transitions to a recovery mode it stores a number of unexpected EMP resets in one of its registers. The number of EMP resets ranging from 0x21 to 0x2A indicates that FW transitions to recovery mode. Use these values to emit log entry about transition process. Previously the pre-recovery mode may not have been detected and there was no log entry when NIC was in pre-recovery mode. Reviewed-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Piotr Kwapulinski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-25i40e: make PF wait reset loop reliablePiotr Kwapulinski1-11/+9
Use jiffies to limit max waiting time for PF reset to succeed. Previous wait loop was unreliable. It required unreasonably long time to wait for PF reset after reboot when NIC was about to enter recovery mode Reviewed-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Piotr Kwapulinski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-25i40e: remove unused definesJesse Brandeburg13-5308/+2
Remove all the unused defines as they are just dead weight. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-25i40e: Move client header locationShiraz Saleem3-205/+2
Move i40e_client.h to include/linux/net/intel/* since its shared between i40iw and i40e. Signed-off-by: Shiraz Saleem <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-18i40e: fix crash when Rx descriptor count is changedBjörn Töpel1-0/+3
When the AF_XDP buffer allocator was introduced, the Rx SW ring "rx_bi" allocation was moved from i40e_setup_rx_descriptors() function, and was instead done in the i40e_configure_rx_ring() function. This broke the ethtool set_ringparam() hook for changing the Rx descriptor count, which was relying on i40e_setup_rx_descriptors() to handle the allocation. Fix this by adding an explicit i40e_alloc_rx_bi() call to i40e_set_ringparam(). Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Björn Töpel <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-18i40e: protect ring accesses with READ- and WRITE_ONCECiara Loftus1-10/+19
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-01xdp: Rename convert_to_xdp_frame in xdp_convert_buff_to_frameLorenzo Bianconi1-1/+1
In order to use standard 'xdp' prefix, rename convert_to_xdp_frame utility routine in xdp_convert_buff_to_frame and replace all the occurrences Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
2020-05-28i40e: Make i40e_shutdown_adminq() return voidJason Yan2-6/+2
Fix the following coccicheck warning: drivers/net/ethernet/intel/i40e/i40e_adminq.c:699:13-21: Unneeded variable: "ret_code". Return "0" on line 710 Signed-off-by: Jason Yan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-28i40e: trivial fixup of comments in i40e_xsk.cJesper Dangaard Brouer1-3/+1
The comment above i40e_run_xdp_zc() was clearly copy-pasted from function i40e_xsk_umem_setup, which is just above. Signed-off-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Björn Töpel <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-28i40e: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-12/+12
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-21i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOLBjörn Töpel4-335/+47
Remove MEM_TYPE_ZERO_COPY in favor of the new MEM_TYPE_XSK_BUFF_POOL APIs. The AF_XDP zero-copy rx_bi ring is now simply a struct xdp_buff pointer. v4->v5: Fixed "warning: Excess function parameter 'bi' description in 'i40e_construct_skb_zc'". (Jakub) Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/bpf/[email protected]
2020-05-21i40e: Separate kernel allocated rx_bi rings from AF_XDP ringsBjörn Töpel7-127/+142
Continuing the path to support MEM_TYPE_XSK_BUFF_POOL, the AF_XDP zero-copy/sk_buff rx_bi rings are now separate. Functions to properly allocate the different rings are added as well. v3->v4: Made i40e_fd_handle_status() static. (kbuild test robot) v4->v5: Fix kdoc for i40e_clean_programming_status(). (Jakub) Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/bpf/[email protected]
2020-05-21i40e: Refactor rx_bi accessesBjörn Töpel2-12/+23
As a first step to migrate i40e to the new MEM_TYPE_XSK_BUFF_POOL APIs, code that accesses the rx_bi (SW/shadow ring) is refactored to use an accessor function. Signed-off-by: Björn Töpel <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/bpf/[email protected]
2020-05-21xsk: Move driver interface to xdp_sock_drv.hMagnus Karlsson2-2/+2
Move the AF_XDP zero-copy driver interface to its own include file called xdp_sock_drv.h. This, hopefully, will make it more clear for NIC driver implementors to know what functions to use for zero-copy support. v4->v5: Fix -Wmissing-prototypes by include header file. (Jakub) Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-05-14xdp: For Intel AF_XDP drivers add XDP frame_szJesper Dangaard Brouer1-0/+2
Intel drivers implement native AF_XDP zerocopy in separate C-files, that have its own invocation of bpf_prog_run_xdp(). The setup of xdp_buff is also handled in separately from normal code path. This patch update XDP frame_sz for AF_XDP zerocopy drivers i40e, ice and ixgbe, as the code changes needed are very similar. Introduce a helper function xsk_umem_xdp_frame_sz() for calculating frame size. Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Björn Töpel <[email protected]> Cc: [email protected] Cc: Magnus Karlsson <[email protected]> Link: https://lore.kernel.org/bpf/158945347511.97035.8536753731329475655.stgit@firesoul
Powered by cgit, Gruvboxed by Blaster4385.