aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e
AgeCommit message (Collapse)AuthorFilesLines
2013-02-04e1000e: cosmetic move of #defines to the new 80003es2lan.hBruce Allan3-63/+96
Move #defines specific to the ESB2/82563 family of devices to the new 80003es2lan.h header file. These defines can be used by other files in the driver and moving them to the 80003es2lan-family-specific file makes it clearer to which devices they are applicable. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-04e1000e: cosmetic move of #defines and prototypes to the new 82571.hBruce Allan6-25/+60
Move #defines and function prototypes specific to the 8257x family of devices (82571, 82572, 82573, 82574, 82583) to the new 82571.h header file (the convention for Intel wired ethernet drivers is to use the name of the first device in the family for related file and function names). These defines and function prototypes can be used by other files in the driver and moving them to the 8257x-family-specific file makes it clearer to which devices they are applicable. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-31e1000e: use generic IEEE MII definitionsBruce Allan9-204/+138
For standard IEEE MII-compatible transceivers, the kernel has generic register and bit definitions. Use those instead of redundant local defines. Do not replace references of MII_CR_SPEED_10 with BMCR_SPEED10 (0x0000) when it is not necessary (i.e. when it is bitwise OR'ed with another value). Some whitespace issues in the surrounding context of the above changes are also cleaned up. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-31e1000e: resolve -Wunused-parameter compile warningsBruce Allan6-33/+31
Remove the unused parameter when possible, otherwise use __always_unused attribute. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-31e1000e: update driver version stringBruce Allan1-1/+1
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-31e1000e: cleanup some whitespace and indentation issuesBruce Allan7-48/+49
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-31e1000e: cleanup: group OR'ed bit settings with parensBruce Allan1-2/+3
For clarity, wrap OR'ed bit settings with parentheses. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-31e1000e: cleanup defines.hBruce Allan1-21/+0
Remove redundant defines which are defined elsewhere. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-28e1000e: cleanup: remove comments which are no longer applicableBruce Allan1-7/+0
Code was removed but the applicable comments were not. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup hw.hBruce Allan1-15/+10
Remove unnecessary #include, forward prototype of struct e1000_adapter and an empty comment; fix a comment which mentions "static data for the MAC" which is not applicable to the following struct; and cleanup some whitespace issues. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: remove unused #defineBruce Allan1-3/+0
All references to E1000_ERT_2048 have been removed. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: adjust PM QoS requestBruce Allan2-15/+19
It has been found that devices other than 82579 (a.k.a. e1000_pch2lan) suffer from dropped transactions on platforms with deep C-states when jumbo frames are enabled. For example, LOMs on ICH9- and ICH10-based platforms which recently had early-receive de-featured (for stability reasons) suffer from this. To resolve this for all devices, when jumbo frames are enabled set the PM QoS DMA latency request based on the size of the receive packet buffer less one full frame. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: correct maximum frame size on 82579Bruce Allan1-1/+1
The largest jumbo frame supported by the 82579 hardware is 9018. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: remove e1000e_commit_phy()Bruce Allan4-28/+16
Remove the function e1000e_commit_phy() and replace the few calls to it with the same function pointer that it would call. The function pointer is almost always set for the devices that access these code paths so there is no risk of a NULL pointer dereference; for the few instances where the function pointer might not be set (i.e. can be called for the few devices which do not have this function pointer set), check for a valid function pointer. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: remove e1000_get_cable_length()Bruce Allan2-7/+2
Remove the function e1000_get_cable_length() and replace the two calls to it with the same function pointer that it would call. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: remove e1000_get_phy_cfg_done()Bruce Allan1-19/+1
Remove the function e1000_get_phy_cfg_done() and replace the single call to it with the same function pointer that it would call. The function pointer is always set so there is no risk of a NULL pointer dereference. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: rename e1000_get_cfg_done()Bruce Allan4-6/+6
In keeping with the e1000e driver function naming convention, the subject function is renamed to indicate it is generic, i.e. it is applicable to more than just a single MAC family (e.g. 80003es2lan, 82571, ich8lan). Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: remove e1000_force_speed_duplex()Bruce Allan1-17/+1
Remove the function e1000_force_speed_duplex() and replace the single call to it with the same function pointer that it would call. The function pointer is always set so there is no risk of a NULL pointer dereference. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: remove e1000_set_d0_lplu_state()Bruce Allan1-27/+6
Replace the function e1000_set_d0_lplu_state() with the contents of it coded in place of the single call to the function. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: do not assign a variable a value when not necessaryBruce Allan7-20/+20
Static analysis with cppcheck has shown a few instances of a variable being reassigned a value before the old one has been used. None of these ever require the old value to be used so remove the old values. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: do not ignore variables which get set a valueBruce Allan4-6/+14
Static analysis with cppcheck has shown a few instances of a variable which is assigned a value that is never used. A number of these are the return status of various driver function calls which should be passed back to the caller of the current function. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: cleanup: remove unnecessary function prototypesBruce Allan4-13/+6
...and cleanup some whitespace in other prototypes. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: add comment to spinlock_t definitionBruce Allan1-1/+1
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: remove definition of struct which is no longer usedBruce Allan1-10/+0
The e1000e driver has been converted to use extended descriptors instead of the older legacy descriptor type. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: fix PHY init workarounds for i217/i218Bruce Allan1-0/+9
Toggling the LANPHYPC Value bit cycles the power on the PHY and sets it back to power-on defaults. This includes setting it's MAC-PHY messaging mode to use the PCIe-like interconnect, so the MAC must also be set back from SMBus mode to PCIe mode otherwise the PHY can be inaccessible. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: correct maximum frame size on i217/i218Bruce Allan1-1/+1
The largest jumbo frame supported by the i217 and i218 hardware is 9018. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: update copyright dateBruce Allan15-16/+16
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: remove prototype of non-existent functionBruce Allan1-2/+0
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: prevent hardware from automatically configuring PHY on I217/I218Bruce Allan1-15/+7
As done with the previous generation managed 82579, prevent the PHY from being put into an unknown state by blocking the hardware from automatically configuring the PHY as done with the previous generation managed 82579. Instead, the driver should configure the PHY with contents of the EEPROM image. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: enable ECC on I217/I218 to catch packet buffer memory errorsBruce Allan6-0/+71
In rare instances, memory errors have been detected in the internal packet buffer memory on I217/I218 when stressed under certain environmental conditions. Enable Error Correcting Code (ECC) in hardware to catch both correctable and uncorrectable errors. Correctable errors will be handled by the hardware. Uncorrectable errors in the packet buffer will cause the packet to be received with an error indication in the buffer descriptor causing the packet to be discarded. If the uncorrectable error is in the descriptor itself, the hardware will stop and interrupt the driver indicating the error. The driver will then reset the hardware in order to clear the error and restart. Both types of errors will be accounted for in statistics counters. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: add support for IEEE-1588 PTPBruce Allan7-3/+416
Add PTP IEEE-1588 support and make accesible via the PHC subsystem. v2: make e1000e_ptp_clock_info a static const struct per Stephen Hemminger Cc: Stephen Hemminger <[email protected]> Cc: Richard Cochran <[email protected]> Signed-off-by: Bruce Allan <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Acked-by: Richard Cochran <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: fix flow-control thresholds for jumbo frames on 82579/I217/I218Bruce Allan1-6/+9
The previous static flow-control thresholds were causing unnecessary pause packets to be transmitted when jumbo frames are configured reducing the throughput. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-27e1000e: fix ethtool offline register test for I217Bruce Allan1-8/+17
The SHRAH[9] register on I217 has a different R/W bit-mask than RAR and SHRAL/H registers. Set R/W bit-mask appropriately for SHRAH[9] when testing the R/W ability of the register. Also, fix the error message log format so that it does not provide misleading information (i.e. the logged register address could be incorrect). Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-18e1000e: add support for hardware timestamping on some devicesBruce Allan7-8/+462
On 82574, 82583, 82579, I217 and I218 add support for hardware time stamping of all or no Rx packets and Tx packets which have the SKBTX_HW_TSTAMP flag set. Update the .get_ts_info ethtool operation to report the supported time stamping modes, and enable and disable hardware time stamping with the SIOCSHWTSTAMP ioctl. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-18e1000e: Use standard #defines for PCIe Capability ASPM fieldsBjorn Helgaas1-2/+9
Use the standard #defines for PCIe Capability ASPM fields. Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but these are defined for the Linux ASPM interfaces, e.g., pci_disable_link_state(), and only coincidentally match the actual register bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match the register bit. Signed-off-by: Bjorn Helgaas <[email protected]> CC: [email protected] Acked-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-18e1000e: add ethtool .get_eee/.set_eeeBruce Allan5-23/+167
Add the ability to query and set Energy Efficient Ethernet parameters via ethtool for applicable devices. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-16e1000e: merge multiple conditional statements into oneBruce Allan1-6/+5
Cleanup a set of conditional tests. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-16e1000e: cleanup code duplicationBruce Allan1-5/+1
The removed code block is duplicated in e1000e_write_itr() so use that instead. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-16e1000e: cleanup magic numberBruce Allan1-2/+2
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-16e1000e: cleanup unnecessary line wrapBruce Allan1-2/+1
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-16e1000e: cleanup unusual comment placementBruce Allan1-1/+1
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-16e1000e: cleanup redundant statistics counterBruce Allan1-1/+0
rx_long_byte_count can be removed since it is duplicated in rx_bytes Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-16e1000e: resolve checkpatch PREFER_PR_LEVEL warningBruce Allan1-5/+3
WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... v2 - remove unnecessary "e1000e:" prefix as pointed out by Joe Perches since that produces a redundant "e1000e:" in the log message Cc: Joe Perches <[email protected]> Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-15e1000e: add missing bailout on errorBruce Allan1-0/+2
...discovered during code inspection. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-15e1000e: unexpected "Reset adapter" message when cable pulledBruce Allan2-20/+21
When there is heavy traffic and the cable is pulled, the driver must reset the adapter to flush the Tx queue in hardware. This causes the reset path to be scheduled and logs the message "Reset adapter" which could be mis- interpreted as an error by the user. Change how the reset path is invoked for this scenario by using the same method done in an existing work-around for 80003es2lan (i.e. set a flag and if the flag is set in the reset code do not log the "Reset adapter" message since the reset is expected). Re-name the FLAG_RX_RESTART_NOW to FLAG_RESTART_NOW since it is used for resets in both the Rx and Tx specific code. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-15e1000e: fix enabling of EEE on 82579 and I217Bruce Allan1-29/+65
Energy Efficient Ethernet on 82579 and I217 should only be enabled if not disabled by the user, if the link is full duplex and the link partner has similar EEE capabilities (stored in different EMI registers on the two different parts). After enabling EEE, read the IEEE MMD register 3.1 (which is also stored in different EMI registers on the two different parts) to clear the count of received Tx/Rx LPI indications. Also, rename I217_EEE_100_SUPPORTED to I82579_EEE_100_SUPPORTED to indicate the bit is valid starting with I82579 (released before I217). Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-15e1000e: 82577: workaround for link drop issueBruce Allan1-1/+7
When connected to certain switches, the 82577 PHY might drop link unexpectedly. Work around the issue by setting the Mean Square Error higher than the hardware default. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-15e1000e: helper functions for accessing EMI registersBruce Allan1-19/+65
The Extended Management Interface (EMI) registers are accessed by first writing the EMI register offset to the EMI_ADDR regiter and then either reading or writing the data to/from the EMI_DATA register. Add helper functions for performing these steps and convert existing EMI register accesses accordingly. Signed-off-by: Bruce Allan <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-15e1000e: Invalid Image CSUM bit changed for I217Bruce Allan2-8/+25
On I217, the bit that indicates an invalid EEPROM (NVM) image checksum has changed from previous ICH/PCH LOMs. When validating the EEPROM checksum, check the appropriate bit on different devices. Signed-off-by: Bruce Allan <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-01-15e1000e: Acquire/release semaphore when writing each EEPROM pageBruce Allan1-11/+11
When data blocks are written to the EEPROM, the HW/SW/FW semaphore must be held for the duration. With large data blocks on 80003es2lan, 82571 and 82572, this can take too long and cause the firmware to take ownership of the semaphore and consequently ownership of writes to the EEPROM. Instead, acquire and release the semaphore for each page of the block written. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.