aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e
AgeCommit message (Collapse)AuthorFilesLines
2013-07-28e1000e: Use marco instead of digit for defining e1000_rx_desc_packet_splitWei Yang2-4/+5
In structure e1000_rx_desc_packet_split, the size of wb.upper.length is defined by a digit. This may introduce some problem when the length is changed. This patch use the macro PS_PAGE_BUFFERS for the definition. And move the definition to hw.h. Signed-off-by: Wei Yang <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-07-28e1000e: Remove duplicate assignment of default rx/tx ring sizeWei Yang1-4/+0
tx_ring/rx_ring size is assigned in function e1000_alloc_queues(), which is called by e1000_sw_init() in the early stage of e1000_probe(). This patch just remove the duplicate assignment of this default ring size value. Signed-off-by: Wei Yang <[email protected]> Reviewed-by: Gavin Shan <[email protected]> Reviewed-by: Da Yu Qiu <[email protected]> Tested-by: Aaron Brown <[email protected]> Acked-by: Bruce Allan <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-07-28e1000e: restore call to pci_clear_master()Dean Nelson1-0/+2
In attempting to resolve a minor merge conflict, commit e5f2ef7ab4690d2e8faa (Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net) accidentally dropped a call to pci_clear_master() that was intended to remain in place. Commit 4e0855dff094b0d56d6b (e1000e: fix pci-device enable-counter balance) replaced a call to pci_disable_device() by one to pci_clear_master(). And then commit 66148babe728f3e00e13 (e1000e: fix runtime power management transitions) deleted a number of lines starting two lines following that call. This patch restores the call to pci_clear_master() in __e1000_shutdown(). v2: added summary lines (enclosed in parens) following commit IDs Signed-off-by: Dean Nelson <[email protected]> Tested-by: Aaron Brown <[email protected]> Acked-by: Bruce Allan <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-05-21e1000e: Release mutex lock only if it has been initially acquiredAkeem G. Abodunrin1-3/+3
This patch fixes the issue of unlocking swflag_mutex for 82574 and 82583 devices regardless of if the hw semaphore has been successfully acquired via e1000_get_hw_semaphore_82574(). With this patch, unlocking mutex now depends on if the hw semaphore was successfully acquired before. And 82574/82583 devices are reset regardless of whether e1000_get_hw_semaphore_82574() returns success or failure. Reported-by: Alexey Khoroshilov <[email protected]> Signed-off-by: Akeem G Abodunrin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-05-21e1000e: prevent warning from -Wunused-parameterBruce Allan1-2/+2
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-05-21e1000e: cleanup whitespaceBruce Allan8-127/+125
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-05-07e1000e: fix scheduling while atomic bugBruce Allan1-1/+1
A scheduling while atomic bug was introduced recently (by commit ce43a2168c59: "e1000e: cleanup USLEEP_RANGE checkpatch checks"). Revert the particular instance of usleep_range() which causes the bug. Reported-by: Maarten Lankhorst <[email protected]> Signed-off-by: Bruce Allan <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-04-25e1000e: panic caused by Rx traffic arriving while interface going downBruce Allan1-2/+5
An "unable to handle kernel paging request" panic can occur when receiving traffic while the interface is going down. Wait for NAPI to be done with current context after disabling interrupts and then disable NAPI. See https://bugzilla.vyatta.com/show_bug.cgi?id=8837. Reported-by: Stephen Hemminger <[email protected]> Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-04-25e1000e: fix numeric overflow in phc settime methodRichard Cochran1-2/+1
The PTP Hardware Clock settime function in the e1000e driver computes nanoseconds from a struct timespec. The code converts the seconds field .tv_sec by multiplying it with NSEC_PER_SEC. However, both operands are of type long, resulting in an unintended overflow. The patch fixes the issue by using the helper function from time.h. CC: stable <[email protected]> Signed-off-by: Richard Cochran <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy1-1/+1
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy1-8/+12
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-5/+5
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+6
Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: David S. Miller <[email protected]>
2013-03-28e1000e: fix scheduling while atomic bugsBruce Allan1-4/+4
The previous commit ce43a2168c59bc47b5f0c1825fd5f9a2a9e3b447 (e1000e: cleanup USLEEP_RANGE checkpatch checks) converted a number of delays and sleeps as recommended in ./Documentation/timers/timers-howto.txt. Unfortunately, a few of the udelay() to usleep_range() conversions are in code paths that are in an atomic context in which usleep_range() should not be used. Revert those specific changes. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-28e1000e: increase driver version numberBruce Allan1-1/+1
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-28e1000e: cleanup unused definesBruce Allan1-7/+0
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-28e1000e: add support for LTR on I217/I218Bruce Allan1-0/+97
Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like" GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed when link is up (which must not exceed the maximum latency supported by the platform), otherwise specify there is no LTR requirement. Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop latencies in the LTR Extended Capability Structure in the PCIe Extended Capability register set, on this device LTR is set by writing the equivalent snoop/no-snoop latencies in the LTRV register in the MAC and set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB) message to the PMC. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-28e1000e: enable EEE by defaultBruce Allan1-4/+0
Now that IEEE802.3az-2010 Energy Efficient Ethernet has been approved as standard (September 2010) and the driver can enable and disable it via ethtool, enable the feature by default on parts which support it. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-28e1000e: EEE capability advertisement not set/disabled as requiredBruce Allan5-72/+88
Devices supported by the driver which support EEE (currently 82579, I217 and I218) are advertising EEE capabilities during auto-negotiation even when EEE has been disabled. In addition to not acting as expected, this also caused the EEE status reported by 'ethtool --show-eee' to be wrong when two of these devices are connected back-to-back and EEE is disabled on one. In addition to fixing this issue, the ability for the user to specify which speeds (100 or 1000 full-duplex) to advertise EEE support has been added. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-27e1000e: long access timeouts when I217/I218 MAC and PHY are out of syncBruce Allan1-1/+28
When the MAC and PHY are in two different modes (different power levels and interconnect speeds), it could take a long time before a PHY register access timed out using the existing MAC-PHY interconnect configuration coded into the driver for ICH- and PCH-based LOMs. Introduce an I217/I218- specific .setup_physical_interface operation which does not override the interconnect configuration in the NVM. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-27e1000e: fix LED blink logic for designs with LEDs driven by cathodeBruce Allan1-7/+20
When the LEDs are driven by cathode, the bit logic is reversed. Use the LED Invert bit to invert the logic. Cleanup use of a magic number and change the for loop increment to reduce the number of shifts. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-27e1000e: slow performance between two 82579 connected via 10Mbit hubBruce Allan3-0/+30
Two 82579 LOMs connected via a 10Mb hub experience extraordinarily low performance. This is because 82579 is excessively aggressive on transmit at 10Mb half-duplex and will not provide sufficient time for the link partner to transmit. When the link partner is also 82579, the result is a lot of collisions (and corresponding re-transmits) that cause the poor performance. To work-around this issue, significantly increase the IPG in the MAC to allow enough gap for the link partner to transmit and reduce the Rx latency in the analog PHY to 0 to reduce the number of collisions. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-27e1000e: additional error handling on PHY register accessesBruce Allan2-0/+13
PHY reads/writes via the MDIC register could potentially return results from a previous PHY register access. If that happens, the offset in the returned results will be that of the previous access and if that is different from the expected offset, log a debug message and error out. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-27e1000e: Add missing dma_mapping_error-call in e1000_alloc_jumbo_rx_buffersChristoph Paasch1-1/+6
After dma_map_page, dma_mapping_error must be called. It seems safe to not free the skb/page allocated in this function, as the skb/page can be reused later. Signed-off-by: Christoph Paasch <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller5-62/+106
Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <[email protected]>
2013-03-08e1000e: cleanup - move defines to appropriate header fileBruce Allan4-9/+7
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup format of struct e1000_opt_list structBruce Allan1-1/+4
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup USLEEP_RANGE checkpatch checksBruce Allan8-38/+38
Resolve strict checkpatch USLEEP_RANGE checks by converting delays and sleeps as described in ./Documentation/timers/timers-howto.txt. Three other violations of the text have also been fixed. CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup unnecessary line breaksBruce Allan5-62/+31
Cuddle broken lines where appropriate. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup formatting of static structsBruce Allan3-4/+8
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup unusually placed commentsBruce Allan7-25/+39
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup (add/remove) blank lines where appropriateBruce Allan8-7/+8
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup SPACING checkpatch checksBruce Allan4-16/+16
CHECK:SPACING: No space is necessary after a cast CHECK:SPACING: space prohibited before semicolon Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup PARENTHESIS_ALIGNMENT checkpatch checksBruce Allan7-127/+139
CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup LEADING_SPACE checkpatch warningsBruce Allan3-9/+9
WARNING:LEADING_SPACE: please, no spaces at the start of a line Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup LONG_LINE checkpatch warningsBruce Allan5-16/+23
WARNING:LONG_LINE: line over 80 characters Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup SPACING checkpatch errors and warningsBruce Allan6-34/+34
ERROR:SPACING: spaces prohibited around that ':' (ctx:WxV) ERROR:SPACING: need consistent spacing around '-' (ctx:WxV) ERROR:SPACING: space required after that ',' (ctx:VxV) ERROR:SPACING: spaces required around that '=' (ctx:VxV) WARNING:SPACING: missing space after enum definition and some similar spacing issues not reported by checkpatch. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup CODE_INDENT checkpatch errorsBruce Allan7-187/+178
ERROR:CODE_INDENT: code indent should use tabs where possible Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-07e1000e: fix accessing to suspended deviceKonstantin Khlebnikov2-0/+15
This patch fixes some annoying messages like 'Error reading PHY register' and 'Hardware Erorr' and saves several seconds on reboot. Cc: Bruce Allan <[email protected]> Signed-off-by: Konstantin Khlebnikov <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Tested-by: Borislav Petkov <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-07e1000e: fix runtime power management transitionsKonstantin Khlebnikov1-60/+18
This patch removes redundant actions from driver and fixes its interaction with actions in pci-bus runtime power management code. It removes pci_save_state() from __e1000_shutdown() for normal adapters, PCI bus callbacks pci_pm_*() will do all this for us. Now __e1000_shutdown() switches to D3-state only quad-port adapters, because they needs quirk for clearing false-positive error from downsteam pci-e port. pci_save_state() now called after clearing bus-master bit, thus __e1000_resume() and e1000_io_slot_reset() must set it back after restoring configuration space. This patch set get_link_status before calling pm_runtime_put() in e1000_open() to allow e1000_idle() get real link status and schedule first runtime suspend. This patch also enables wakeup for device if management mode is enabled (like for WoL) as result pci_prepare_to_sleep() would setup wakeup without special actions like custom 'enable_wakeup' sign. Cc: Bruce Allan <[email protected]> Signed-off-by: Konstantin Khlebnikov <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Tested-by: Borislav Petkov <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-07e1000e: fix pci-device enable-counter balanceKonstantin Khlebnikov1-1/+1
This patch removes redundant and unbalanced pci_disable_device() from __e1000_shutdown(). pci_clear_master() is enough, device can go into suspended state with elevated enable_cnt. Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133 ("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35 Cc: Bruce Allan <[email protected]> CC: Stable <[email protected]> Signed-off-by: Konstantin Khlebnikov <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Tested-by: Borislav Petkov <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-05e1000e: workaround DMA unit hang on I218Bruce Allan3-1/+73
At 1000Mbps link speed, one of the MAC's internal clocks can be stopped for up to 4us when entering K1 (a power mode of the MAC-PHY interconnect). If the MAC is waiting for completion indications for 2 DMA write requests into Host memory (e.g. descriptor writeback or Rx packet writing) and the indications occur while the clock is stopped, both indications will be missed by the MAC causing the MAC to wait for the completion indications and be unable to generate further DMA write requests. This results in an apparent hardware hang. Work-around the issue by disabling the de-assertion of the clock request when 1000Mbps link is acquired (K1 must be disabled while doing this). Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-15e1000e: display a warning message when SmartSpeed worksKoki Sanagi1-0/+7
Current e1000e driver doesn't tell nothing when Link Speed is downgraded due to SmartSpeed. As a result, users suspect that there is something wrong with NIC. If the cause of it is SmartSpeed, there is no means to replace NIC. This patch make e1000e notify users that SmartSpeed worked. Signed-off-by: Koki Sanagi <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-05e1000e: cleanup checkpatch braces checksBruce Allan5-8/+2
Resolve the following strict checkpatch checks: CHECK:BRACES: Blank lines aren't necessary after an open brace '{' CHECK:BRACES: Blank lines aren't necessary before a close brace '}' CHECK:BRACES: braces {} should be used on all arms of this statement Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-05e1000e: convert enums of register offsets and move #defines to regs.hBruce Allan3-223/+253
There are enough register offsets to warrant being in their own header file, and doing so logically separates them from other header file content. They have been converted from an enumerated data type to #defines as is done in all the other Intel wired ethernet drivers. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-05e1000e: cosmetic move of #defines and prototypes to the new manage.hBruce Allan4-41/+73
Move #defines, function prototypes and data types which are applicable to all/most devices supported by the driver but are specific to the manageability component of each device to the new manage.h header file. These #defines, function prototypes and data types can be used by other files in the driver and moving them to the manageability-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-05e1000e: cosmetic move of #defines and function prototypes to the new nvm.hBruce Allan3-15/+48
Move #defines and function prototypes which are applicable to all/most devices supported by the driver and are specific to the NVM component of each device to the new nvm.h header file. These #defines and function prototypes can be used by other files in the driver and moving them to the NVM-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-04e1000e: cosmetic move of #defines and function prototypes to the new phy.hBruce Allan5-222/+243
Move #defines and function prototypes which are applicable to all/most devices supported by the driver and are specific to the PHY component of each device to the new phy.h header file. These function prototypes can be used by other files in the driver and moving them to the PHY-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-04e1000e: cosmetic move of function prototypes to the new mac.hBruce Allan3-37/+76
Move prototypes for functions which are applicable to all/most devices supported by the driver and are specific to the MAC component of each device to the new mac.h header file. These function prototypes can be used by other files in the driver and moving them to the MAC-specific file makes it clearer to which component they are applicable. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-02-04e1000e: cosmetic move of #defines and prototypes to the new ich8lan.hBruce Allan6-230/+270
Move #defines and function prototypes specific to the ICH/PCH family of devices (ICH8/82562, ICH8/82566, ICH8/82567, ICH9/82562, ICH9/82566, ICH9/82567, ICH10/82567, 82577, 82578, 82579, I217, I218) to the new ich8lan.h header file (the convention for Intel wired ethernet drivers is to use the name of the first device in the family for related file and function names). These defines and function prototypes can be used by other files in the driver and moving them to the ICH/PCH-family-specific file makes it clearer to which devices they are applicable. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.