aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/ethtool.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-28e1000e: Add support for Meteor LakeSasha Neftin1-0/+2
Add devices IDs for the next LOM generations that will be available on the next Intel Client platform (Meteor Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-30e1000e: Remove unnecessary usages of memsetSuraj Upadhyay1-2/+2
Replace memsets of 1 byte with simple assignments. Issue found with checkpatch.pl Signed-off-by: Suraj Upadhyay <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher1-6/+5
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher1-2/+0
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <[email protected]> CC: Jesse Brandeburg <[email protected]> CC: Alek Loktionov <[email protected]> CC: Kevin Liedtke <[email protected]> CC: Aaron Rowden <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Co-developed-by: Jacob Keller <[email protected]> Tested-by: Aaron Brown <[email protected]>
2020-03-05e1000e: reject unsupported coalescing paramsJakub Kicinski1-0/+1
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. v3: adjust commit message for new member name Signed-off-by: Jakub Kicinski <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-19e1000e: Add support for Alder LakeSasha Neftin1-0/+2
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Alder Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-10-29e1000e: Add support for Tiger LakeSasha Neftin1-1/+3
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Tiger Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-08-22ethernet: Delete unnecessary checks before the macro call “dev_kfree_skb”Markus Elfring1-4/+2
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-28e1000e: Reduce boot time by tightening sleep rangesArjan van de Ven1-7/+7
The e1000e driver is a great user of the usleep_range() API, and has nice ranges that in principle help power management. However the ranges that are used only during system startup are very long (and can add easily 100 msec to the boot time) while the power savings of such long ranges is irrelevant due to the one-off, boot only, nature of these functions. This patch shrinks some of the longest ranges to be shorter (while still using a power friendly 1 msec range); this saves 100msec+ of boot time on my BDW NUCs Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Paul Menzel <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-20/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <[email protected]> Acked-by: Shannon Nelson <[email protected]> Acked-by: Richard Cochran <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-06e1000e: Don't return uninitialized statsBenjamin Poirier1-1/+1
Some statistics passed to ethtool are garbage because e1000e_get_stats64() doesn't write them, for example: tx_heartbeat_errors. This leaks kernel memory to userspace and confuses users. Do like ixgbe and use dev_get_stats() which first zeroes out rtnl_link_stats64. Fixes: 5944701df90d ("net: remove useless memset's in drivers get_stats64") Reported-by: Stefan Priebe <[email protected]> Signed-off-by: Benjamin Poirier <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-06-06e1000e: add statistic indicating number of skipped Tx timestampsJacob Keller1-0/+1
The e1000e driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-04-30e1000e: Add Support for CannonLakeSasha Neftin1-4/+6
The propagation of CannonLake mac type to driver functionality Signed-off-by: Sasha Neftin <[email protected]> Reviewed-by: Raanan Avargil <[email protected]> Reviewed-by: Dima Ruinskiy <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-03-21e1000e: use new API ethtool_{get|set}_link_ksettingsPhilippe Reynes1-52/+59
The ethtool API {get|set}_settings is deprecated. We move this driver to new API {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-05-13e1000e: use BIT() macro for bit definesJacob Keller1-22/+23
This prevents signed bitshift issues when the shift would overwrite the signed bit, and prevents making this mistake in the future when copying and modifying code. Use GENMASK or the unsigned postfix for cases which aren't suitable for BIT() macro. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-05-13e1000e: fix ethtool autoneg off for non-copperSteve Shih1-2/+10
This patch fixes the issues for disabling auto-negotiation and forcing speed and duplex settings for the non-copper media. For non-copper media, e1000_get_settings should return ETH_TP_MDI_INVALID for eth_tp_mdix_ctrl instead of ETH_TP_MDI_AUTO so subsequent e1000_set_settings call would not fail with -EOPNOTSUPP. e1000_set_spd_dplx should not automatically turn autoneg back on for forced 1000 Mbps full duplex settings for non-copper media. Cc: [email protected] Cc: Daniel Walker <[email protected]> Signed-off-by: Steve Shih <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06e1000e: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann1-2/+2
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera1-2/+0
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-06-03e1000e: Bump the version to 3.2.5Yanir Lubetkin1-1/+1
Bump the version to reflect the driver changes and bug fixes for i219. Also update the copyright, while we are at it. Signed-off-by: Yanir Lubetkin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-06-03e1000e: fix unit hang during loopback testYanir Lubetkin1-3/+24
System would hang during execution of "ethtool -t <NIC>" for the same reason that required flushing the descriptor rings. This fix disables MULR for the loopback test to avoid the hang state. Signed-off-by: Yanir Lubetkin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-02-23e1000e: initial support for i219David Ertman1-2/+4
i219 is the next-generation LOM that will be available on systems with the Sunrise Point Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support for the device. Signed-off-by: Dave Ertman <[email protected]> Tested-by: Aaron Brown <[email protected]> Tested-by: Carmen Edwards <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-07-20e1000e: remove unnecessary break after returnFabian Frederick1-2/+0
Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko1-2/+2
Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <[email protected]> Signed-off-by: Wilfried Klaebe <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-04-23e1000e: Cleanup to fix checkpatch missing blank linesDavid Ertman1-0/+3
Fixing "WARNING:SPACING: networking uses a blank line after declarations" Signed-off-by: Dave Ertman <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-04-23e1000e: Cleanup return values in ethtoolDavid Ertman1-4/+4
Changing occurrences of returning 0 and 1 from bool functions to false and true, respectively Signed-off-by: Dave Ertman <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-03-28e1000e: add timeout for TX HW time stamping workJakub Kicinski1-0/+1
Hardware may fail to report time stamp e.g.: - when hardware time stamping is not enabled - when time stamp is requested shortly after ifup Timeout time stamp reading work to prevent it from scheduling itself indefinitely. Report timeout events via system log and device stats. Signed-off-by: Jakub Kicinski <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-03-07e1000e: Fix ethtool offline tests for 82579 partsDavid Ertman1-2/+8
Changes to the rar_entry_count value require a change to the indexing used to access the SHRA[H|L] registers when testing them with 'ethtool -t <iface> offline' Signed-off-by: Dave Ertman <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-03-07e1000e: Refactor PM flowsDavid Ertman1-3/+3
Refactor the system power management flows to prevent the suspend path from being executed twice when hibernating since both the freeze and poweroff callbacks were set to e1000_suspend() via SET_SYSTEM_SLEEP_PM_OPS. There are HW workarounds that are performed during this flow and calling them twice was causing erroneous behavior. Re-arrange the code to take advantage of common code paths and explicitly set the individual dev_pm_ops callbacks for suspend, resume, freeze, thaw, poweroff and restore. Add a boolean parameter (reset) to the e1000e_down function to allow for cases when the HW should not be reset when downed during a PM event. Now that all suspend/shutdown paths result in a call to __e1000_shutdown() that checks Wake on Lan status, removing redundant check for WoL in e1000_power_down_phy(). Signed-off-by: Dave Ertman <[email protected]> Acked-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-03-07e1000e: Cleanup - Update GPL header and CopyrightDavid Ertman1-27/+20
This patch is to update the GPL header by removing the portion that refers to the Free Software Foundation address. Change the copyright date for 2014. Reformat the header comments to conform to kernel networking coding norms Signed-off-by: Dave Ertman <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-09-13e1000e: fix overrun of PHY RAR arrayDavid Ertman1-0/+8
When copying the MAC RAR registers to PHY there is an error in the calculation of the rar_entry_count, which causes a write of unknown/ undefined register space in the MAC to unknown/undefined register space in the PHY. This patch fixes the overrun with writing to the PHY RAR and also fixes the ethtool offline register tests so that the correctly addressed registers have the appropriate bitmasks for R/W and RO bits for affected parts. Shawn Rader gets credit for finding and fixing the register overrun. Signed-off-by: Dave Ertman <[email protected]> CC: Shawn Rader <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-08-22e1000e: resolve checkpatch JIFFIES_COMPARISON warningBruce Allan1-1/+1
WARNING:JIFFIES_COMPARISON: Comparing jiffies is almost always wrong; prefer time_after, time_before and friends Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-07-28e1000e: ethtool unnecessarily takes device out of RPM suspendBruce Allan1-28/+77
A previous patch (commit e60b22c5b7 e1000e: fix accessing to suspended device) added .begin and .complete ethtool driver callbacks so that the device was resumed from Runtime Power Management (RPM) suspend state for all ethtool operations. This is overkill for operations which do not need to access any registers in the device. This patch makes it so that the device is taken out of RPM suspend only for those ethtool operations that must access device registers. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-05-21e1000e: cleanup whitespaceBruce Allan1-17/+17
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-28e1000e: EEE capability advertisement not set/disabled as requiredBruce Allan1-44/+19
Devices supported by the driver which support EEE (currently 82579, I217 and I218) are advertising EEE capabilities during auto-negotiation even when EEE has been disabled. In addition to not acting as expected, this also caused the EEE status reported by 'ethtool --show-eee' to be wrong when two of these devices are connected back-to-back and EEE is disabled on one. In addition to fixing this issue, the ability for the user to specify which speeds (100 or 1000 full-duplex) to advertise EEE support has been added. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+13
Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <[email protected]>
2013-03-08e1000e: cleanup - move defines to appropriate header fileBruce Allan1-4/+2
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup USLEEP_RANGE checkpatch checksBruce Allan1-5/+5
Resolve strict checkpatch USLEEP_RANGE checks by converting delays and sleeps as described in ./Documentation/timers/timers-howto.txt. Three other violations of the text have also been fixed. CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup unnecessary line breaksBruce Allan1-8/+4
Cuddle broken lines where appropriate. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup formatting of static structsBruce Allan1-1/+2
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup unusually placed commentsBruce Allan1-6/+9
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup (add/remove) blank lines where appropriateBruce Allan1-0/+2
Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup SPACING checkpatch checksBruce Allan1-8/+8
CHECK:SPACING: No space is necessary after a cast CHECK:SPACING: space prohibited before semicolon Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup PARENTHESIS_ALIGNMENT checkpatch checksBruce Allan1-31/+40
CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup LONG_LINE checkpatch warningsBruce Allan1-1/+2
WARNING:LONG_LINE: line over 80 characters Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup SPACING checkpatch errors and warningsBruce Allan1-1/+1
ERROR:SPACING: spaces prohibited around that ':' (ctx:WxV) ERROR:SPACING: need consistent spacing around '-' (ctx:WxV) ERROR:SPACING: space required after that ',' (ctx:VxV) ERROR:SPACING: spaces required around that '=' (ctx:VxV) WARNING:SPACING: missing space after enum definition and some similar spacing issues not reported by checkpatch. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-08e1000e: cleanup CODE_INDENT checkpatch errorsBruce Allan1-20/+17
ERROR:CODE_INDENT: code indent should use tabs where possible Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-03-07e1000e: fix accessing to suspended deviceKonstantin Khlebnikov1-0/+13
This patch fixes some annoying messages like 'Error reading PHY register' and 'Hardware Erorr' and saves several seconds on reboot. Cc: Bruce Allan <[email protected]> Signed-off-by: Konstantin Khlebnikov <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Tested-by: Borislav Petkov <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.