aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ibm
AgeCommit message (Collapse)AuthorFilesLines
2019-04-10ibmvnic: Enable GROThomas Falcon1-1/+1
Enable Generic Receive Offload in the ibmvnic driver. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <[email protected]>
2019-04-04ibmvnic: Fix completion structure initializationThomas Falcon1-2/+3
Fix device initialization completion handling for vNIC adapters. Initialize the completion structure on probe and reinitialize when needed. This also fixes a race condition during kdump where the driver can attempt to access the completion struct before it is initialized: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000081acbe0 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1 NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900 REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006 CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58 GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4 GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28 GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100 GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006 GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000 GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003 GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58 NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100 LR [c0000000081ad964] complete+0x64/0xa0 Call Trace: [c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable) [c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0 [c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic] [c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic] [c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0 [c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400 [c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0 [c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210 [c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24 [c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130 [c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120 Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-04ibmvnic: remove set but not used variable 'netdev'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/ibm/ibmvnic.c: In function '__ibmvnic_reset': drivers/net/ethernet/ibm/ibmvnic.c:1971:21: warning: variable 'netdev' set but not used [-Wunused-but-set-variable] It's never used since introduction in commit ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-04ehea: remove set but not used variables 'epa' and 'cq_handle_ref'YueHaibing1-5/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/ibm/ehea/ehea_qmr.c: In function 'ehea_create_cq': drivers/net/ethernet/ibm/ehea/ehea_qmr.c:127:7: warning: variable 'cq_handle_ref' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/ibm/ehea/ehea_qmr.c:126:15: warning: variable 'epa' set but not used [-Wunused-but-set-variable] They are never used since commit 7a291083225a ("[PATCH] ehea: IBM eHEA Ethernet Device Driver") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-04ehea: Fix a copy-paste err in ehea_init_port_resYueHaibing1-1/+1
pr->tx_bytes should be assigned to tx_bytes other than rx_bytes. Reported-by: Hulk Robot <[email protected]> Fixes: ce45b873028f ("ehea: Fixing statistics") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2019-03-23net: ibm: fix possible object reference leakWen Yang1-0/+1
The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by: Wen Yang <[email protected]> Cc: Douglas Miller <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2019-03-19ibmveth: Make array ibmveth_stats staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/ethernet/ibm/ibmveth.c:96:21: warning: symbol 'ibmveth_stats' was not declared. Should it be static? Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-19ibmvnic: Report actual backing device speed and duplex valuesMurilo Fossa Vicentini2-17/+94
The ibmvnic driver currently reports a fixed value for both speed and duplex settings regardless of the actual backing device that is being used. By adding support to the QUERY_PHYS_PARMS command defined by the PAPR+ we can query the current physical port state and report the proper values for these feilds. Reported-by: Abdul Haleem <[email protected]> Signed-off-by: Murilo Fossa Vicentini <[email protected]> Reviewed-by: Mauro S. M. Rodrigues <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-02-06net: emac: remove IBM_EMAC_RX_SKB_HEADROOMChristian Lamparter3-39/+47
The EMAC driver had a custom IBM_EMAC_RX_SKB_HEADROOM Kconfig option that reserved additional skb headroom for RX. This patch removes the option and migrates the code to use napi_alloc_skb() and netdev_alloc_skb_ip_align() in its place. Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-24ibmveth: Do not process frames after calling napi_rescheduleThomas Falcon1-2/+0
The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-2/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <[email protected]> Signed-off-by: Luis Chamberlain <[email protected]> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <[email protected]>
2018-12-31ibmveth: fix DMA unmap error in ibmveth_xmit_start error pathTyrel Datwyler1-1/+5
Commit 33a48ab105a7 ("ibmveth: Fix DMA unmap error") fixed an issue in the normal code path of ibmveth_xmit_start() that was originally introduced by Commit 6e8ab30ec677 ("ibmveth: Add scatter-gather support"). This original fix missed the error path where dma_unmap_page is wrongly called on the header portion in descs[0] which was mapped with dma_map_single. As a result a failure to DMA map any of the frags results in a dmesg warning when CONFIG_DMA_API_DEBUG is enabled. ------------[ cut here ]------------ DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function [device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single] WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10 ... <snip> ... DMA-API: Mapped at: ibmveth_start_xmit+0x30c/0xb60 dev_hard_start_xmit+0x100/0x450 sch_direct_xmit+0x224/0x490 __qdisc_run+0x20c/0x980 __dev_queue_xmit+0x1bc/0xf20 This fixes the API misuse by unampping descs[0] with dma_unmap_single. Fixes: 6e8ab30ec677 ("ibmveth: Add scatter-gather support") Signed-off-by: Tyrel Datwyler <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-9/+11
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <[email protected]>
2018-12-14net/ibmvnic: Remove tests of member addressWen Yang1-5/+2
The driver was checking for non-NULL address. - adapter->napi[i] This is pointless as these will be always non-NULL, since the 'dapter->napi' is allocated in init_napi(). It is safe to get rid of useless checks for addresses to fix the coccinelle warning: >>drivers/net/ethernet/ibm/ibmvnic.c: test of a variable/field address Since such statements always return true, they are redundant. Signed-off-by: Wen Yang <[email protected]> CC: Benjamin Herrenschmidt <[email protected]> CC: Paul Mackerras <[email protected]> CC: Michael Ellerman <[email protected]> CC: Thomas Falcon <[email protected]> CC: John Allen <[email protected]> CC: "David S. Miller" <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] Signed-off-by: David S. Miller <[email protected]>
2018-12-10ibmvnic: Fix non-atomic memory allocation in IRQ contextThomas Falcon1-1/+1
ibmvnic_reset allocated new reset work item objects in a non-atomic context. This can be called from a tasklet, generating the output below. Allocate work items with the GFP_ATOMIC flag instead. BUG: sleeping function called from invalid context at mm/slab.h:421 in_atomic(): 1, irqs_disabled(): 1, pid: 93, name: kworker/0:2 INFO: lockdep is turned off. irq event stamp: 66049 hardirqs last enabled at (66048): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (66049): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (66044): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (66045): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 0 PID: 93 Comm: kworker/0:2 Kdump: loaded Not tainted 4.20.0-rc6-00001-g1b50a8f03706 #7 Workqueue: events linkwatch_event Call Trace: [c0000003fffe7ae0] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffe7b30] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffe7bb0] [c000000000391514] kmem_cache_alloc_trace+0x3e4/0x440 [c0000003fffe7c30] [d000000005b2309c] ibmvnic_reset+0x16c/0x360 [ibmvnic] [c0000003fffe7cc0] [d000000005b29834] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffe7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffe7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffe7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3967980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f39679c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f39679f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3967a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3967a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3967ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3967b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3967ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3967bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3967c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3967c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3967d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3967db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3967e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-12-10ibmvnic: Convert reset work item mutex to spin lockThomas Falcon2-8/+10
ibmvnic_reset can create and schedule a reset work item from an IRQ context, so do not use a mutex, which can sleep. Convert the reset work item mutex to a spin lock. Locking debugger generated the trace output below. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 in_atomic(): 1, irqs_disabled(): 1, pid: 120, name: kworker/8:1 4 locks held by kworker/8:1/120: #0: 0000000017c05720 ((wq_completion)"events"){+.+.}, at: process_one_work+0x188/0x710 #1: 00000000ace90706 ((linkwatch_work).work){+.+.}, at: process_one_work+0x188/0x710 #2: 000000007632871f (rtnl_mutex){+.+.}, at: rtnl_lock+0x30/0x50 #3: 00000000fc36813a (&(&crq->lock)->rlock){..-.}, at: ibmvnic_tasklet+0x88/0x2010 [ibmvnic] irq event stamp: 26293 hardirqs last enabled at (26292): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (26293): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (26288): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (26289): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 8 PID: 120 Comm: kworker/8:1 Kdump: loaded Not tainted 4.20.0-rc6 #6 Workqueue: events linkwatch_event Call Trace: [c0000003fffa7a50] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffa7aa0] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffa7b20] [c000000000be960c] __mutex_lock+0x8c/0xb40 [c0000003fffa7c30] [d000000006202ac8] ibmvnic_reset+0x78/0x330 [ibmvnic] [c0000003fffa7cc0] [d0000000062097f4] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffa7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffa7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffa7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3f87980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f3f879c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f3f879f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3f87a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3f87a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3f87ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3f87b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3f87ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3f87bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3f87c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3f87c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3f87d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3f87db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3f87e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+2
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <[email protected]>
2018-12-07Revert "net/ibm/emac: wrong bit is used for STA control"Benjamin Herrenschmidt1-1/+1
This reverts commit 624ca9c33c8a853a4a589836e310d776620f4ab9. This commit is completely bogus. The STACR register has two formats, old and new, depending on the version of the IP block used. There's a pair of device-tree properties that can be used to specify the format used: has-inverted-stacr-oc has-new-stacr-staopc What this commit did was to change the bit definition used with the old parts to match the new parts. This of course breaks the driver on all the old ones. Instead, the author should have set the appropriate properties in the device-tree for the variant used on his board. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-12-03net/ibmvnic: Fix RTNL deadlock during device resetThomas Falcon1-1/+1
Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during driver reset but still calls netdev_notify_peers, which results in a deadlock. Instead, use call_netdevice_notifiers, which is functionally the same except that it does not take the RTNL lock again. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-42/+32
2018-11-22ibmvnic: Update driver queues after change in ring size supportThomas Falcon1-1/+8
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-22ibmvnic: Fix RX queue buffer cleanupThomas Falcon1-2/+2
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-19net/ibmnvic: Fix deadlock problem in resetJuliet Kim2-39/+22
This patch changes to use rtnl_lock only during a reset to avoid deadlock that could occur when a thread operating close is holding rtnl_lock and waiting for reset_lock acquired by another thread, which is waiting for rtnl_lock in order to set the number of tx/rx queues during a reset. Also, we now setting the number of tx/rx queues during a soft reset for failover or LPM events. Signed-off-by: Juliet Kim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-3/+6
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-07ibmvnic: fix accelerated VLAN handlingMichał Mirosław1-1/+1
Don't request tag insertion when it isn't present in outgoing skb. Signed-off-by: Michał Mirosław <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-30/+0
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <[email protected]>
2018-10-01ibmvnic: Add ethtool private flag for driver-defined queue limitsThomas Falcon2-35/+100
When choosing channel amounts and ring sizes, the maximums in the ibmvnic driver are defined by the virtual i/o server management partition. Even though they are defined as maximums, the client driver may in fact successfully request resources that exceed these limits, which are mostly dependent on a user's hardware With this in mind, provide an ethtool flag that when enabled will allow the user to request resources limited by driver-defined maximums instead of limits defined by the management partition. The driver will try to honor the user's request but may not allowed by the management partition. In this case, the driver requests as close as it can get to the desired amount until it succeeds. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-10-01ibmvnic: Introduce driver limits for ring sizesThomas Falcon1-0/+1
Introduce driver-defined maximums for queue ring sizes. Devices available for IBM vNIC today will likely not allow this amount, but this should give us some leeway for future devices that may support larger ring sizes. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-10-01ibmvnic: Increase maximum queue size limitThomas Falcon1-1/+1
Increase queue size limit to 16. Devices available for IBM vNIC today will not allow this amount, but this should give us some leeway for future devices that may support more RX or TX queues. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-28ibmvnic: remove ndo_poll_controllerEric Dumazet1-16/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ibmvnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. ibmvnic_netpoll_controller() was completely wrong anyway, as it was scheduling NAPI to service RX queues (instead of TX), so I doubt netpoll ever worked on this driver. Signed-off-by: Eric Dumazet <[email protected]> Cc: Thomas Falcon <[email protected]> Cc: John Allen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-28ehea: remove ndo_poll_controllerEric Dumazet1-14/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ehea uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <[email protected]> Cc: Douglas Miller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+10
Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <[email protected]>
2018-09-19net: ibm: remove redundant local variables 'act_nr_of_entries' and 'act_pages'zhong jiang1-3/+1
That local variable are never used after being assigned. hence it should be redundant and can be removed. Signed-off-by: zhong jiang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-19net: ibm: remove a redundant local variable 'k'zhong jiang1-2/+1
The local variable 'k' is never used after being assigned. hence it should be redundant adn can be removed. Signed-off-by: zhong jiang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-18net: ethernet: remove redundant includezhong jiang1-1/+0
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-18net: ibm: fix return type of ndo_start_xmit functionYueHaibing3-6/+7
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-18net: emac: fix fixed-link setup for the RTL8363SB switchChristian Lamparter1-5/+10
On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-13net/ibm/emac: Remove VLA usageKees Cook2-1/+8
In the quest to remove all stack VLA usage from the kernel[1], this removes the VLA used for the emac xaht registers size. Since the size of registers can only ever be 4 or 8, as detected in emac_init_config(), the max can be hardcoded and a runtime test added for robustness. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: "David S. Miller" <[email protected]> Cc: Christian Lamparter <[email protected]> Cc: Ivan Mikhaylov <[email protected]> Cc: [email protected] Co-developed-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-12net: ethernet: Use DIV_ROUND_UP instead of reimplementing its functionzhong jiang1-1/+1
DIV_ROUND_UP has implemented the code-opened function. Therefore, just replace the implementation with DIV_ROUND_UP. Signed-off-by: zhong jiang <[email protected]> Acked-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03net/ibm/emac: wrong emac_calc_base call was used by typoIvan Mikhaylov1-3/+3
__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1 by copy-paste mistake for emac4syn. Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size") Signed-off-by: Ivan Mikhaylov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-31ibmvnic: Include missing return code checks in reset functionThomas Falcon1-3/+9
Check the return codes of these functions and halt reset in case of failure. The driver will remain in a dormant state until the next reset event, when device initialization will be re-attempted. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-07ibmvnic: Update firmware error reporting with cause stringThomas Falcon1-4/+30
Print a string instead of the error code. Since there is a possibility that the driver can recover, classify it as a warning instead of an error. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-08-07ibmvnic: Remove code to request error informationThomas Falcon2-176/+1
When backing device firmware reports an error, it provides an error ID, which is meant to be queried for more detailed error information. Currently, however, an error ID is not provided by the Virtual I/O server and there are not any plans to do so. For now, it is always unfilled or zero, so request_error_information will never be called. Remove it. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-16ibmvnic: Fix error recovery on login failureJohn Allen1-2/+2
Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by: John Allen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-16ibmvnic: Revise RX/TX queue error messagesThomas Falcon1-12/+27
During a device failover, there may be latency between the loss of the current backing device and a notification from firmware that a failover has occurred. This latency can result in a large amount of error printouts as firmware returns outgoing traffic with a generic error code. These are not necessarily errors in this case as the firmware is busy swapping in a new backing adapter and is not ready to send packets yet. This patch reclassifies those error codes as warnings with an explanation that a failover may be pending. All other return codes will be considered errors. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+15
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.