aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ibm
AgeCommit message (Collapse)AuthorFilesLines
2017-05-18ibmvnic: fix missing unlock on error in __ibmvnic_reset()Wei Yongjun1-0/+1
Add the missing unlock before return from function __ibmvnic_reset() in the error handling case. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Move queue restarting in ibmvnic_tx_completeNathan Fontenot1-12/+10
Restart of the subqueue should occur outside of the loop processing any tx buffers instead of doing this in the middle of the loop. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Record SKB RX queue during pollThomas Falcon1-0/+1
Map each RX SKB to the RX queue associated with the driver's RX SCRQ. This should improve the RX CPU load balancing issues seen by the performance team. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Continue skb processing after skb completion errorNathan Fontenot1-1/+1
There is not a need to stop processing skbs if we encounter a skb that has a receive completion error. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Check for driver reset first in ibmvnic_xmitNathan Fontenot1-6/+6
Move the check for the driver resetting to the first thing in ibmvnic_xmit(). Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Wait for any pending scrqs entries at driver closeNathan Fontenot1-20/+27
When closing the ibmvnic driver we need to wait for any pending sub crq entries to ensure they are handled. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Clean up tx pools when closingNathan Fontenot1-0/+30
When closing the ibmvnic driver, most notably during the reset path, the tx pools need to be cleaned to ensure there are no hanging skbs that need to be free'ed. The need for this was found during debugging a loss of network traffic after handling a driver reset. The underlying cause was some skbs in the tx pool that were never free'ed. As a result the upper network layers never tried a re-send since it believed the driver still had the skb. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Whitespace correction in release_rx_poolsNathan Fontenot1-1/+1
Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Delete napi's when releasing driver resourcesNathan Fontenot1-0/+9
The napi structs allocated at drivier initializatio need to be free'ed when releasing the drivers resources. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Updated reset handlingNathan Fontenot2-157/+275
The ibmvnic driver has multiple handlers for resetting the driver depending on the reason the reset is needed (failover, lpm, fatal erors,...). All of the reset handlers do essentially the same thing, this patch moves this work to a common reset handler. By doing this we also allow the driver to better handle situations where we can get a reset while handling a reset. The updated reset handling works by adding a reset work item to the list of resets and then scheduling work to perform the reset. This step is necessary because we can receive a reset in interrupt context and we want to handle the reset out of interrupt context. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Replace is_closed with state fieldNathan Fontenot2-9/+23
Replace the is_closed flag in the ibmvnic adapter strcut with a more comprehensive state field that tracks the current state of the driver. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-03ibmvnic: Move resource initialization to its own routineNathan Fontenot1-32/+39
Move all of the calls to initialize resources for the driver to a separate routine. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-26ibmvnic: Move initialization of sub crqs to ibmvnic_initNathan Fontenot1-11/+12
The sub crq structures are initialized in interrupt context while handling the response to crqs when negotiating capabilities for the driver. The sub crqs do not need to be initialized at this point and can be moved to being done from ibmvnic_init. Moving the init of the sub crqs to ibmvnic_init also allows use to allocate the memory with GFP_KERNEL instead of GFP_ATOMIC. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-26ibmvnic: Split initialization of scrqs to its own routineNathan Fontenot1-47/+54
Split the sending of capability request crqs and the initialization of sub crqs into their own routines. This is a first step to moving the allocation of sub-crqs out of interrupt context. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-24ibmvnic: Free skb's in cases of failure in transmitThomas Falcon1-3/+15
When an error is encountered during transmit we need to free the skb instead of returning TX_BUSY. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-24ibmvnic: Validate napi exist before disabling themNathan Fontenot1-2/+4
Validate that the napi structs exist before trying to disable them at driver close. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-24ibmvnic: Add set_link_state routine for setting adapter link stateNathan Fontenot2-14/+58
Create a common routine for setting the link state for the vnic adapter. This update moves the sending of the crq and waiting for the link state response to a common place. The new routine also adds handling of resending the crq in cases of getting a partial success response. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-24ibmvnic: Move initialization of the stats token to ibmvnic_openNathan Fontenot1-6/+4
We should be initializing the stats token in the same place we initialize the other resources for the driver. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-24ibmvnic: Only retrieve error info if presentNathan Fontenot1-20/+51
When handling a fatal error in the driver, there can be additional error information provided by the vios. This information is not always present, so only retrieve the additional error information when present. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-24ibmvnic: Insert header on VLAN tagged received frameMurilo Fossa Vicentini2-1/+22
This patch addresses a modification in the PAPR+ specification which now defines a previously reserved value for vNIC capabilities. It indicates whether the system firmware performs a VLAN header stripping on all VLAN tagged received frames, in case it does, the behavior expected is for the ibmvnic driver to be responsible for inserting the VLAN header. Reported-by: Manvanthara B. Puttashankar <[email protected]> Signed-off-by: Murilo Fossa Vicentini <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-24ibmvnic: Set real number of rx queuesThomas Falcon1-5/+21
Along with 5 TX queues, 5 RX queues are allocated at the beginning of device probe. However, only the real number of TX queues is set. Configure the real number of RX queues as well. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Remove unused bouce bufferNathan Fontenot2-57/+0
The bounce buffer is not used in the ibmvnic driver, just get rid of it. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Allocate zero-filled memory for sub crqsNathan Fontenot1-6/+3
Update the allocation of memory for the sub crq structs and their associated pages to allocate zero-filled memory. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Disable irq prior to closeBrian King1-0/+18
Add some code to call disable_irq on all the vnic interface's irqs. This fixes a crash observed when closing an active interface, as seen in the oops below when we try to access a buffer in the interrupt handler which we've already freed. Unable to handle kernel paging request for data at address 0x00000001 Faulting instruction address: 0xd000000003886824 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(OEN) rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_ Supported: No, Unsupported modules are loaded CPU: 8 PID: 0 Comm: swapper/8 Tainted: G OE NX 4.4.49-92.11-default #1 task: c00000007f990110 ti: c0000000fffa0000 task.ti: c00000007f9b8000 NIP: d000000003886824 LR: d000000003886824 CTR: c0000000007eff60 REGS: c0000000fffa3a70 TRAP: 0300 Tainted: G OE NX (4.4.49-92.11-default) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22008042 XER: 20000008 CFAR: c000000000008468 DAR: 0000000000000001 DSISR: 40000000 SOFTE: 0 GPR00: d000000003886824 c0000000fffa3cf0 d000000003894118 0000000000000000 GPR04: 0000000000000000 0000000000000000 c000000001249da0 0000000000000000 GPR08: 000000000000000e 0000000000000000 c0000000ccb00000 d000000003889180 GPR12: c0000000007eff60 c000000007af4c00 0000000000000001 c0000000010def30 GPR16: c00000007f9b8000 c000000000b98c30 c00000007f9b8080 c000000000bab858 GPR20: 0000000000000005 0000000000000000 c0000000ff5d7e80 c0000000f809f648 GPR24: c0000000ff5d7ec8 0000000000000000 0000000000000000 c0000000ccb001a0 GPR28: 000000000000000a c0000000f809f600 c0000000fd4cd900 c0000000f9cd5b00 NIP [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] LR [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] Call Trace: [c0000000fffa3cf0] [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] (unreliable) [c0000000fffa3dd0] [c000000000132940] __handle_irq_event_percpu+0x90/0x2e0 [c0000000fffa3e90] [c000000000132bcc] handle_irq_event_percpu+0x3c/0x90 [c0000000fffa3ed0] [c000000000132c88] handle_irq_event+0x68/0xc0 [c0000000fffa3f00] [c000000000137edc] handle_fasteoi_irq+0xec/0x250 [c0000000fffa3f30] [c000000000131b04] generic_handle_irq+0x54/0x80 [c0000000fffa3f60] [c000000000011190] __do_irq+0x80/0x1d0 [c0000000fffa3f90] [c0000000000248d8] call_do_irq+0x14/0x24 [c00000007f9bb9e0] [c000000000011380] do_IRQ+0xa0/0x120 [c00000007f9bba40] [c000000000002594] hardware_interrupt_common+0x114/0x180 Signed-off-by: Brian King <[email protected]> Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Correct crq and resource releasingNathan Fontenot1-3/+6
We should not be releasing the crq's when calling close for the adapter, these need to remain open to facilitate operations such as updating the mac address. The crq's should be released in the adpaters remove routine. Additionally, we need to call release_reources from remove. This corrects the scenario of trying to remove an adapter that has only been probed. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Remove inflight listNathan Fontenot2-88/+19
The inflight list used to track memory that is allocated for crq that are inflight is not needed. The one piece of the inflight list that does need to be cleaned at module exit is the error buffer list which is already attached to the adapter struct. This patch removes the inflight list and moves checking the error buffer list to ibmvnic_remove. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Do not disable IRQ after scheduling taskletBrian King1-19/+6
Since the primary CRQ is only used for service functions and not in the performance path, simplify the code a bit and avoid disabling the IRQ. Signed-off-by: Brian King <[email protected]> Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Fixup atomic API usageBrian King1-6/+4
Replace a couple of modifications of an atomic followed by a read of the atomic, which is no longer atomic, to use atomic_XX_return variants to avoid race conditions. Signed-off-by: Brian King <[email protected]> Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Unmap longer term buffer before freeBrian King1-1/+1
Make sure we unregister long term buffers from the adapter prior to DMA unmapping it and freeing the buffer. Failure to do so could result in a DMA to a now invalid address. Signed-off-by: Brian King <[email protected]> Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Fix ibmvnic_change_mac_addr struct formatMurilo Fossa Vicentini2-3/+4
The ibmvnic_change_mac_addr struct alignment was not matching the defined format in PAPR+, it had the reserved and return code fields swapped. As a consequence, the CHANGE_MAC_ADDR_RSP commands were being improperly handled and executed even when the operation wasn't successfully completed by the system firmware. Also changing the endianness of the debug message to make it easier to parse the CRQ content. Signed-off-by: Murilo Fossa Vicentini <[email protected]> Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-21ibmvnic: Report errors when failing to release sub-crqsThomas Falcon1-0/+6
Add reporting of errors when releasing sub-crqs fails. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-07net: emac: Use net_device_stats from struct net_deviceTobias Klauser2-2/+1
Instead of using a private copy of struct net_device_stats in struct emac_instance, use stats from struct net_device. Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-05net: ibm: emac: remove unused sysrq handler for 'c' keyEric Biggers5-305/+0
Since commit d6580a9f1523 ("kexec: sysrq: simplify sysrq-c handler"), the sysrq handler for the 'c' key has been sysrq_crash_op. Debugging code in the ibm_emac driver also tries to register a handler for the 'c' key, but this has no effect because register_sysrq_key() doesn't replace existing handlers. Since evidently no one has cared enough to fix this in the last 8 years, and it's very rare for drivers to register sysrq handlers (for good reason), just remove the dead code. Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Cleanup failure path in ibmvnic_openNathan Fontenot1-32/+19
Now that ibmvnic_release_resources will clean up all of our resources properly, even if they were not allocated, we can just call this for failues in ibmvnic_open. This patch also moves the ibmvnic_release_resources() routine up in the file to avoid creating a forward declaration ad re-names it to drop the ibmvnic prefix. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Create init/release routines for stats tokenNathan Fontenot1-12/+34
Create an initialization and a release routine for the stats token used by the ibmvnic driver. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Merge the two release_sub_crq_queue routinesNathan Fontenot1-32/+22
Keeping two routines for releasing sub crqs, one for when irqs are not initialized and one for when they are, is a bit of overkill. Merge the two routines to a common release routine that will check for an irq and release it if needed. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Create init and release routines for the rx poolNathan Fontenot1-103/+101
Move the initialization and the release of the rx pool to their own routines, and update them to do validation. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Create init and release routines for the tx poolNathan Fontenot1-56/+78
Move the initialization and the release of the tx pool to their own routines, and update them to do validation. This also adds validation to the release of the long term buffer. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Create init and release routines for the bounce bufferNathan Fontenot1-27/+50
Move the handling of initialization and releasing the bounce buffer to their own init and release routines. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Update main crq initialization and releaseNathan Fontenot1-7/+15
Update the initialization and release routines for the crq queue so that we validate the crq queue. Additionally this updates the naming of the init and release routines for the crq queue to drop the ibmvnic prefix. This matches the naming for similar routines in the driver Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-30ibmvnic: Remove debugfs supportNathan Fontenot2-658/+0
The debugfs support in the ibmvnic driver is not, and never has been, supported. Just remove it. The work done in the debugfs code for the driver was part of the original spec for the ibmvnic driver. The corresponding support for this from the server side was never supported and has been dropped. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-27net: ibmvnic: Remove unused net_stats member from struct ibmvnic_adapterTobias Klauser1-1/+0
The ibmvnic driver keeps its statistics in net_device->stats, so the net_stats member in struct ibmvnic_adapter is unused. Remove it. Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-27net: ibmveth: Remove unused stats member from struct ibmveth_adapterTobias Klauser1-1/+0
The ibmveth driver keeps its statistics in net_device->stats, so the stats member in struct ibmveth_adapter is unused. Remove it. Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
Conflicts: drivers/net/ethernet/broadcom/genet/bcmmii.c drivers/net/hyperv/netvsc.c kernel/bpf/hashtab.c Almost entirely overlapping changes. Signed-off-by: David S. Miller <[email protected]>
2017-03-21ibmvnic: Correct ibmvnic handling of device open/closeJohn Allen2-48/+67
When closing the ibmvnic device we need to release the resources used in communicating to the virtual I/O server. These need to be re-negotiated with the server at open time. This patch moves the releasing of resources a separate routine and updates the open and close handlers to release all resources at close and re-negotiate and allocate these resources at open. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-21ibmvnic: Move ibmvnic adapter intialization to its own routineJohn Allen1-50/+60
The intialization of the ibmvnic driver with respect to the virtual server it connects to should be moved to its own routine. This will alolow the driver to initiate this process from places outside of the drivers probe routine. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-21ibmvnic: Move login to its own routineJohn Allen1-8/+20
Move the code that handles login and renegotiation of ibmvnic capabilities to its own routine. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-21ibmvnic: Move login and queue negotiation into ibmvnic_openJohn Allen1-45/+43
VNIC server expects LINK_STATE_UP to be sent within 30s of the login. If we exceed the timeout, VNIC server will attempt to fail over. Since time between probe and open of the device is indeterminate, move login and queue negotiation into ibmvnic open so we can guarantee that login and sending LINK_STATE_UP occur within the 30s window. Signed-off-by: John Allen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-16ibmvnic: Free tx/rx scrq pointer array when releasing sub-crqsNathan Fontenot1-0/+2
The pointer array for the tx/rx sub crqs should be free'ed when releasing the tx/rx sub crqs. Signed-off-by: Nathan Fontenot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-08net: ibm: emac: fix regression caused by emac_dt_phy_probe()Christian Lamparter1-8/+17
Julian Margetson reported a panic on his SAM460EX with Kernel 4.11-rc1: | Unable to handle kernel paging request for data at address 0x00000014 | Oops: Kernel access of bad area, sig: 11 [#1] | PREEMPT | Canyonlands | Modules linked in: | CPU: 0 PID: 1 Comm: swapper Not tainted [...] | task: ea838000 task.stack: ea836000 | NIP: c0599f5c LR: c0599dd8 CTR: 00000000 | REGS: ea837c80 TRAP: 0300 Not tainted [...] | MSR: 00029000 <CE,EE,ME> | CR: 24371242 XER: 20000000 | DEAR: 00000014 ESR: 00000000 | GPR00: c0599ce8 ea837d30 ea838000 c0e52dcc c0d56ffb [...] | NIP [c0599f5c] emac_probe+0xfb4/0x1304 | LR [c0599dd8] emac_probe+0xe30/0x1304 | Call Trace: | [ea837d30] [c0599ce8] emac_probe+0xd40/0x1304 (unreliable) | [ea837d80] [c0533504] platform_drv_probe+0x48/0x90 | [ea837da0] [c0531c14] driver_probe_device+0x15c/0x2c4 | [ea837dd0] [c0531e04] __driver_attach+0x88/0xb0 | ---[ end trace ... ]--- The problem is caused by emac_dt_phy_probe() returing success (0) for existing device-trees configurations that do not specify a "phy-handle" property. This caused the code to skip the existing phy probe and setup. Which led to essential phy related data-structures being uninitialized. This patch also removes the unused variable in emac_dt_phy_connect(). Fixes: a577ca6badb5261d ("net: emac: add support for device-tree based PHY discovery and setup") Reported-by: Julian Margetson <[email protected]> Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: David S. Miller <[email protected]>