aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ibm/ibmvnic.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-16/+9
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-14ibmvnic: remove duplicate napi_schedule call in open functionLijun Pan1-5/+0
Remove the unnecessary napi_schedule() call in __ibmvnic_open() since interrupt_rx() calls napi_schedule_prep/__napi_schedule during every receive interrupt. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: remove duplicate napi_schedule call in do_reset functionLijun Pan1-5/+1
During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(), which will calls napi_schedule if previous state is VNIC_CLOSED (i.e, the reset case, and "ifconfig down" case). So there is no need for do_reset to call napi_schedule again at the end of the function though napi_schedule will neglect the request if napi is already scheduled. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: avoid calling napi_disable() twiceLijun Pan1-2/+1
__ibmvnic_open calls napi_disable without checking whether NAPI polling has already been disabled or not. This could cause napi_disable being called twice, which could generate deadlock. For example, the first napi_disable will spin until NAPI_STATE_SCHED is cleared by napi_complete_done, then set it again. When napi_disable is called the second time, it will loop infinitely because no dev->poll will be running to clear NAPI_STATE_SCHED. To prevent above scenario from happening, call ibmvnic_napi_disable() which checks if napi is disabled or not before calling napi_disable. Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine") Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13ibmvnic: queue reset work in system_long_wqLijun Pan1-3/+4
The reset process for ibmvnic commonly takes multiple seconds, clearly making it inappropriate for schedule_work/system_wq. The reason to make this change is that ibmvnic's use of the default system-wide workqueue for a relatively long-running work item can negatively affect other workqueue users. So, queue the relatively slow reset job to the system_long_wq. Suggested-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13ibmvnic: correctly use dev_consume/free_skb_irqLijun Pan1-4/+7
It is more correct to use dev_kfree_skb_irq when packets are dropped, and to use dev_consume_skb_irq when packets are consumed. Fixes: 0d973388185d ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls") Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13ibmvnic: improve failover sysfs entryLijun Pan1-6/+8
The current implementation relies on H_IOCTL call to issue a H_SESSION_ERR_DETECTED command to let the hypervisor to send a failover signal. However, it may not work if there is no backup device or if the vnic is already in error state, e.g., "ibmvnic 30000003 env3: rx buffer returned with rc 6". Add a last resort, that is to schedule a failover reset via CRQ command. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12ibmvnic: print adapter state as a stringLijun Pan1-18/+49
The adapter state can be added or deleted over different versions of the source code. Print a string instead of a number. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12ibmvnic: print reset reason as a stringLijun Pan1-7/+28
The reset reason can be added or deleted over different versions of the source code. Print a string instead of a number. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-05ibmvnic: Use 'skb_frag_address()' instead of hand coding itChristophe JAILLET1-3/+2
'page_address(skb_frag_page()) + skb_frag_off()' can be replaced by an equivalent 'skb_frag_address()' which is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-09Merge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-10/+7
Pull networking fixes from David Miller: 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau. 2) TX skb error handling fix in mt76 driver, also from Felix. 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman. 4) Avoid double free of percpu pointers when freeing a cloned bpf prog. From Cong Wang. 5) Use correct printf format for dma_addr_t in ath11k, from Geert Uytterhoeven. 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan Hsieh. 7) Don't report truncated frames to mac80211 in mt76 driver, from Lorenzop Bianconi. 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang. 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann. 10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from Arjun Roy. 11) Ignore routes with deleted nexthop object in mlxsw, from Ido Schimmel. 12) Need to undo tcp early demux lookup sometimes in nf_nat, from Florian Westphal. 13) Fix gro aggregation for udp encaps with zero csum, from Daniel Borkmann. 14) Make sure to always use imp*_ndo_send when necessaey, from Jason A. Donenfeld. 15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov. 16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin. 17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir Oltean. 18) Make sure textsearch copntrol block is large enough, from Wilem de Bruijn. 19) Revert MAC changes to r8152 leading to instability, from Hates Wang. 20) Advance iov in 9p even for empty reads, from Jissheng Zhang. 21) Double hook unregister in nftables, from PabloNeira Ayuso. 22) Fix memleak in ixgbe, fropm Dinghao Liu. 23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne. 24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang Tang. 25) Fix DOI refcount bugs in cipso, from Paul Moore. 26) One too many irqsave in ibmvnic, from Junlin Yang. 27) Fix infinite loop with MPLS gso segmenting via virtio_net, from Balazs Nemeth. * git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits) s390/qeth: fix notification for pending buffers during teardown s390/qeth: schedule TX NAPI on QAOB completion s390/qeth: improve completion of pending TX buffers s390/qeth: fix memory leak after failed TX Buffer allocation net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0 net: check if protocol extracted by virtio_net_hdr_set_proto is correct net: dsa: xrs700x: check if partner is same as port in hsr join net: lapbether: Remove netif_start_queue / netif_stop_queue atm: idt77252: fix null-ptr-dereference atm: uPD98402: fix incorrect allocation atm: fix a typo in the struct description net: qrtr: fix error return code of qrtr_sendmsg() mptcp: fix length of ADD_ADDR with port sub-option net: bonding: fix error return code of bond_neigh_init() net: enetc: allow hardware timestamping on TX queues with tc-etf enabled net: enetc: set MAC RX FIFO to recommended value net: davicom: Use platform_get_irq_optional() net: davicom: Fix regulator not turned off on driver removal net: davicom: Fix regulator not turned off on failed probe net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports ...
2021-03-05ibmvnic: remove excessive irqsaveJunlin Yang1-2/+2
ibmvnic_remove locks multiple spinlocks while disabling interrupts: spin_lock_irqsave(&adapter->state_lock, flags); spin_lock_irqsave(&adapter->rwi_lock, flags); As reported by coccinelle, the second _irqsave() overwrites the value saved in 'flags' by the first _irqsave(), therefore when the second _irqrestore() comes,the value in 'flags' is not valid,the value saved by the first _irqsave() has been lost. This likely leads to IRQs remaining disabled. So remove the second _irqsave(): spin_lock_irqsave(&adapter->state_lock, flags); spin_lock(&adapter->rwi_lock); Generated by: ./scripts/coccinelle/locks/flags.cocci ./drivers/net/ethernet/ibm/ibmvnic.c:5413:1-18: ERROR: nested lock+irqsave that reuses flags from line 5404. Fixes: 4a41c421f367 ("ibmvnic: serialize access to work queue on remove") Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-04ibmvnic: always store valid MAC addressJiri Wiesner1-3/+2
The last change to ibmvnic_set_mac(), 8fc3672a8ad3, meant to prevent users from setting an invalid MAC address on an ibmvnic interface that has not been brought up yet. The change also prevented the requested MAC address from being stored by the adapter object for an ibmvnic interface when the state of the ibmvnic interface is VNIC_PROBED - that is after probing has finished but before the ibmvnic interface is brought up. The MAC address stored by the adapter object is used and sent to the hypervisor for checking when an ibmvnic interface is brought up. The ibmvnic driver ignoring the requested MAC address when in VNIC_PROBED state caused LACP bonds (bonds in 802.3ad mode) with more than one slave to malfunction. The bonding code must be able to change the MAC address of its slaves before they are brought up during enslaving. The inability of kernels with 8fc3672a8ad3 to set the MAC addresses of bonding slaves is observable in the output of "ip address show". The MAC addresses of the slaves are the same as the MAC address of the bond on a working system whereas the slaves retain their original MAC addresses on a system with a malfunctioning LACP bond. Fixes: 8fc3672a8ad3 ("ibmvnic: fix ibmvnic_set_mac") Signed-off-by: Jiri Wiesner <jwiesner@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-03ibmvnic: Fix possibly uninitialized old_num_tx_queues variable warning.Michal Suchanek1-5/+3
GCC 7.5 reports: ../drivers/net/ethernet/ibm/ibmvnic.c: In function 'ibmvnic_reset_init': ../drivers/net/ethernet/ibm/ibmvnic.c:5373:51: warning: 'old_num_tx_queues' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/net/ethernet/ibm/ibmvnic.c:5373:6: warning: 'old_num_rx_queues' may be used uninitialized in this function [-Wmaybe-uninitialized] The variable is initialized only if(reset) and used only if(reset && something) so this is a false positive. However, there is no reason to not initialize the variables unconditionally avoiding the warning. Fixes: 635e442f4a48 ("ibmvnic: merge ibmvnic_reset_init and ibmvnic_init") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-02vio: make remove callback return voidUwe Kleine-König1-4/+1
The driver core ignores the return value of struct bus_type::remove() because there is only little that can be done. To simplify the quest to make this function return void, let struct vio_driver::remove() return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea. Note there are two nominally different implementations for a vio bus: one in arch/sparc/kernel/vio.c and the other in arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc one. Before this patch for a device that was bound to a driver without a remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device core still considers the device unbound after vio_bus_remove() returns calling this unconditionally is the consistent behaviour which is implemented here. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [mpe: Drop unneeded hvcs_remove() forward declaration, squash in change from sfr to drop ibmvnic_remove() forward declaration] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org
2021-02-24ibmvnic: fix a race between open and resetSukadev Bhattiprolu1-8/+55
__ibmvnic_reset() currently reads the adapter->state before getting the rtnl and saves that state as the "target state" for the reset. If this read occurs when adapter is in PROBED state, the target state would be PROBED. Just after the target state is saved, and before the actual reset process is started (i.e before rtnl is acquired) if we get an ibmvnic_open() call we would move the adapter to OPEN state. But when the reset is processed (after ibmvnic_open()) drops the rtnl), it will leave the adapter in PROBED state even though we already moved it to OPEN. To fix this, use the RTNL to improve serialization when reading/updating the adapter state. i.e determine the target state of a reset only after getting the RTNL. And if a reset is in progress during an open, simply set the target state of the adapter and let the reset code finish the open (like we currently do if failover is pending). One twist to this serialization is if the adapter state changes when we drop the RTNL to update the link state. Account for this by checking if there was an intervening open and update the target state for the reset accordingly (see new comments in the code). Note that only the reset functions and ibmvnic_open() can set the adapter to OPEN state and this must happen under rtnl. Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20210224050229.1155468-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-16net: re-solve some conflicts after net -> net-next mergeJakub Kicinski1-2/+3
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-12/+32
2021-02-15ibmvnic: serialize access to work queue on removeSukadev Bhattiprolu1-7/+20
The work queue is used to queue reset requests like CHANGE-PARAM or FAILOVER resets for the worker thread. When the adapter is being removed the adapter state is set to VNIC_REMOVING and the work queue is flushed so no new work is added. However the check for adapter being removed is racy in that the adapter can go into REMOVING state just after we check and we might end up adding work just as it is being flushed (or after). The ->rwi_lock is already being used to serialize queue/dequeue work. Extend its usage ensure there is no race when scheduling/flushing work. Fixes: 6954a9e4192b ("ibmvnic: Flush existing work items before device removal") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Cc:Uwe Kleine-König <uwe@kleine-koenig.org> Cc:Saeed Mahameed <saeed@kernel.org> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15ibmvnic: skip send_request_unmap for timeout resetLijun Pan1-1/+6
Timeout reset will trigger the VIOS to unmap it automatically, similarly as FAILVOER and MOBILITY events. If we unmap it in the linux side, we will see errors like "30000003: Error 4 in REQUEST_UNMAP_RSP". So, don't call send_request_unmap for timeout reset. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15ibmvnic: add memory barrier to protect long term bufferLijun Pan1-0/+5
dma_rmb() barrier is added to load the long term buffer before copying it to socket buffer; and dma_wmb() barrier is added to update the long term buffer before it being accessed by VIOS (virtual i/o server). Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15ibmvnic: substitute mb() with dma_wmb() for send_*crq* functionsLijun Pan1-2/+2
The CRQ and subCRQ descriptors are DMA mapped, so dma_wmb(), though weaker, is good enough to protect the data structures. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15ibmvnic: simplify reset_long_term_buff functionLijun Pan1-38/+8
The only thing reset_long_term_buff() should do is set buffer to zero. After doing that, it is not necessary to send_request_map again to VIOS since it actually does not change the mapping. So, keep memset function and remove all others. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: Set to CLOSED state even on errorSukadev Bhattiprolu1-3/+1
If set_link_state() fails for any reason, we still cleanup the adapter state and cannot recover from a partial close anyway. So set the adapter to CLOSED state. That way if a new soft/hard reset is processed, the adapter will remain in the CLOSED state until the next ibmvnic_open(). Fixes: 01d9bd792d16 ("ibmvnic: Reorganize device close") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer strscpy over strlcpyLijun Pan1-3/+3
Fix this warning: WARNING: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: remove unused spinlock_t stats_lock definitionLijun Pan1-2/+0
stats_lock is no longer used. So remove it. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix miscellaneous checksLijun Pan1-8/+9
Fix the following checkpatch checks: CHECK: Macro argument 'off' may be better as '(off)' to avoid precedence issues CHECK: Alignment should match open parenthesis CHECK: multiple assignments should be avoided CHECK: Blank lines aren't necessary before a close brace '}' CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Unnecessary parentheses around 'rc != H_FUNCTION' Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: avoid multiple line dereferenceLijun Pan1-9/+8
Fix the following checkpatch warning: WARNING: Avoid multiple line dereference Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix bracesLijun Pan1-2/+1
Fix the following checkpatch warning: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix block commentsLijun Pan1-8/+4
Fix the following checkpatch warning: WARNING: networking block comments don't use an empty /* line, use /* Comment... Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer 'unsigned long' over 'unsigned long int'Lijun Pan1-8/+8
Fix the following checkpatch warnings: WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary WARNING: Prefer 'long' over 'long int' as the int is unnecessary Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+16
2021-02-06ibmvnic: Clear failover_pending if unable to scheduleSukadev Bhattiprolu1-1/+16
Normally we clear the failover_pending flag when processing the reset. But if we are unable to schedule a failover reset we must clear the flag ourselves. We could fail to schedule the reset if we are in PROBING state (eg: when booting via kexec) or because we could not allocate memory. Thanks to Cris Forno for helping isolate the problem and for testing. Fixes: 1d8504937478 ("powerpc/vnic: Extend "failover pending" window") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Tested-by: Cristobal Forno <cforno12@linux.ibm.com> Link: https://lore.kernel.org/r/20210203050802.680772-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01ibmvnic: remove unnecessary rmb() inside ibmvnic_pollLijun Pan1-1/+0
rmb() can be removed since: 1. pending_scrq() has dma_rmb() at the function end; 2. dma_rmb(), though weaker, is enough here. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Dwip Banerjee <dnbanerg@us.ibm.com> Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01ibmvnic: rework to ensure SCRQ entry reads are properly orderedLijun Pan1-19/+11
Move the dma_rmb() between pending_scrq() and ibmvnic_next_scrq() into the end of pending_scrq() to save the duplicated code since this dma_rmb will be used 3 times. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01ibmvnic: device remove has higher precedence over resetLijun Pan1-5/+0
Returning -EBUSY in ibmvnic_remove() does not actually hold the removal procedure since driver core doesn't care for the return value (see __device_release_driver() in drivers/base/dd.c calling dev->bus->remove()) though vio_bus_remove (in arch/powerpc/platforms/pseries/vio.c) records the return value and passes it on. [1] During the device removal precedure, checking for resetting bit is dropped so that we can continue executing all the cleanup calls in the rest of the remove function. Otherwise, it can cause latent memory leaks and kernel crashes. [1] https://lore.kernel.org/linuxppc-dev/20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53 Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210129043402.95744-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+6
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27ibmvnic: Ensure that CRQ entry read are correctly orderedLijun Pan1-0/+6
Ensure that received Command-Response Queue (CRQ) entries are properly read in order by the driver. dma_rmb barrier has been added before accessing the CRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-16net: ethernet: ibm: ibmvnic: Fix some kernel-doc misdemeanoursLee Jones1-14/+13
Fixes the following W=1 kernel build warning(s): from drivers/net/ethernet/ibm/ibmvnic.c:35: inlined from ‘handle_vpd_rsp’ at drivers/net/ethernet/ibm/ibmvnic.c:4124:3: drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'skb' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_len' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_data' not described in 'build_hdr_data' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_field' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_data' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'len' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_len' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'scrq_arr' not described in 'create_hdr_descs' drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'txbuff' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'num_entries' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'adapter' not described in 'do_change_param_reset' drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'rwi' not described in 'do_change_param_reset' drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'reset_state' not described in 'do_change_param_reset' drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'adapter' not described in 'do_reset' drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'rwi' not described in 'do_reset' drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'reset_state' not described in 'do_reset' Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09ibmvnic: merge do_change_param_reset into do_resetLijun Pan1-110/+44
Commit b27507bb59ed ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run") introduced do_change_param_reset function to solve the rtnl lock issue. Majority of the code in do_change_param_reset duplicates do_reset. Also, we can handle the rtnl lock issue in do_reset itself. Hence merge do_change_param_reset back into do_reset to clean up the code. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210106213514.76027-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04ibmvnic: fix: NULL pointer dereference.YANG LI1-3/+1
The error is due to dereference a null pointer in function reset_one_sub_crq_queue(): if (!scrq) { netdev_dbg(adapter->netdev, "Invalid scrq reset. irq (%d) or msgs(%p).\n", scrq->irq, scrq->msgs); return -EINVAL; } If the expression is true, scrq must be a null pointer and cannot dereference. Fixes: 9281cf2d5840 ("ibmvnic: avoid memset null scrq msgs") Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by: Abaci <abaci@linux.alibaba.com> Acked-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23ibmvnic: continue fatal error reset after passive initLijun Pan1-2/+1
Commit f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init") says "If the passive CRQ initialization occurs before the FATAL reset task is processed, the FATAL error reset task would try to access a CRQ message queue that was freed, causing an oops. The problem may be most likely to occur during DLPAR add vNIC with a non-default MTU, because the DLPAR process will automatically issue a change MTU request. Fix this by not processing fatal error reset if CRQ is passively initialized after client-driven CRQ initialization fails." The original commit skips a specific reset condition, but that does not fix the problem it claims to fix, and misses a reset condition. The effective fix is commit 0e435befaea4 ("ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq") and commit a0faaa27c716 ("ibmvnic: fix NULL pointer dereference in reset_sub_crq_queues"). With above two fixes, there are no more crashes seen as described even without the original commit, so I would like to revert the original commit. Fixes: f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201223204904.12677-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22ibmvnic: fix login buffer memory leakLijun Pan1-0/+3
Commit 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") frees login_rsp_buffer in release_resources() and send_login() because handle_login_rsp() does not free it. Commit f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp(). It seems unnecessary to free it in release_resources() and send_login(). There are chances that handle_login_rsp returns earlier without freeing buffers. Double-checking the buffer is harmless since release_login_buffer and release_login_rsp_buffer will do nothing if buffer is already freed. Fixes: f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201219213919.21045-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16use __netdev_notify_peers in ibmvnicLijun Pan1-6/+3
Start to use the lockless version of netdev_notify_peers. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09ibmvnic: fix rx buffer tracking and index management in replenish_rx_pool ↵Dwip N. Banerjee1-0/+2
partial success We observed that in the error case for batched send_subcrq_indirect() the driver does not account for the partial success case. This caused Linux to crash when free_map and pool index are inconsistent. Driver needs to update the rx pools "available" count when some batched sends worked but an error was encountered as part of the whole operation. Also track replenish_add_buff_failure for statistic purposes. Fixes: 4f0b6812e9b9a ("ibmvnic: Introduce batched RX buffer descriptor transmission") Signed-off-by: Dwip N. Banerjee <dnbanerg@us.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-07ibmvnic: add some debugsSukadev Bhattiprolu1-3/+22
We sometimes run into situations where a soft/hard reset of the adapter takes a long time or fails to complete. Having additional messages that include important adapter state info will hopefully help understand what is happening, reduce the guess work and minimize requests to reproduce problems with debug patches. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Link: https://lore.kernel.org/r/20201205022235.2414110-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-68/+123
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01ibmvnic: Fix TX completion error handlingThomas Falcon1-3/+1
TX completions received with an error return code are not being processed properly. When an error code is seen, do not proceed to the next completion before cleaning up the existing entry's data structures. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-01ibmvnic: Ensure that SCRQ entry reads are correctly orderedThomas Falcon1-0/+18
Ensure that received Subordinate Command-Response Queue (SCRQ) entries are properly read in order by the driver. These queues are used in the ibmvnic device to process RX buffer and TX completion descriptors. dma_rmb barriers have been added after checking for a pending descriptor to ensure the correct descriptor entry is checked and after reading the SCRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.