| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, the opaque field in the TX BD is only used for debugging.
The TX completion logic relies on getting one TX completion for each
packet and they always complete in order.
Improve this scheme by putting the producer information (ring index plus
number of BDs for the packet) in the opaque field. This way, we can
handle TX completion processing by looking at the last TX completion
instead of counting the number of completions.
Since we no longer need to count the exact number of completions, we can
optimize xmit_more by disabling TX completion when the xmit_more
condition is true. This will be done in later patches.
This patch is only initializing the opaque field in the TX BD and is
not changing the driver's TX completion logic yet.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
tg3_tso_bug() drops a packet if it cannot be segmented for any reason.
The number of discarded frames should be incremented accordingly.
Signed-off-by: Alex Pakhunov <[email protected]>
Signed-off-by: Vincent Wong <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This change moves [rt]x_dropped counters to tg3_napi so that they can be
updated by a single writer, race-free.
Signed-off-by: Alex Pakhunov <[email protected]>
Signed-off-by: Vincent Wong <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The TX ring maintained by the tg3 driver can end up in the state, when it
has packets queued for sending but the NIC hardware is not informed, so no
progress is made. This leads to a multi-second interruption in network
traffic followed by dev_watchdog() firing and resetting the queue.
The specific sequence of steps is:
1. tg3_start_xmit() is called at least once and queues packet(s) without
updating tnapi->prodmbox (netdev_xmit_more() returns true)
2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be
called.
3. tg3_tso_bug() determines that the SKB is too large, ...
if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) {
... stops the queue, and returns NETDEV_TX_BUSY:
netif_tx_stop_queue(txq);
...
if (tg3_tx_avail(tnapi) <= frag_cnt_est)
return NETDEV_TX_BUSY;
4. Since all tg3_tso_bug() call sites directly return, the code updating
tnapi->prodmbox is skipped.
5. The queue is stuck now. tg3_start_xmit() is not called while the queue
is stopped. The NIC is not processing new packets because
tnapi->prodmbox wasn't updated. tg3_tx() is not called by
tg3_poll_work() because the all TX descriptions that could be freed has
been freed:
/* run TX completion thread */
if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
tg3_tx(tnapi);
6. Eventually, dev_watchdog() fires triggering a reset of the queue.
This fix makes sure that the tnapi->prodmbox update happens regardless of
the reason tg3_start_xmit() returned.
Signed-off-by: Alex Pakhunov <[email protected]>
Signed-off-by: Vincent Wong <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.
This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).
The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.
Signed-off-by: George Shuklin <[email protected]>
Fixes: 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
The recent firmware interface change has added 2 counters in struct
rx_port_stats_ext. This caused 2 stray ethtool counters to be
displayed.
Since new counters are added from time to time, fix it so that the
ethtool logic will only display up to the maximum known counters.
These 2 counters are not used by production firmware yet.
Fixes: 754fbf604ff6 ("bnxt_en: Update firmware interface to 1.10.2.171")
Reviewed-by: Ajit Khaparde <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <[email protected]>
Acked-by: Stephen Hemminger <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count
handling is unified and page_pool_alloc_frag() is supported
in 32-bit arch with 64-bit DMA, so remove it.
Signed-off-by: Yunsheng Lin <[email protected]>
CC: Lorenzo Bianconi <[email protected]>
CC: Alexander Duyck <[email protected]>
CC: Liang Chen <[email protected]>
CC: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The current driver code does not accurately report the supported and
advertised link modes. It basically always assumes the media type
is copper for any particular speed. Utilize the recently added link
mode mappings to accurately report fully qualified ethtool link modes for
advertised and supported speeds.
If the media type is known, we will report the supported link modes for
that media only. If the media is not known, we will report all possible
supported link modes. The user can now specify any supported link modes
(including NRZ and PAM4) to advertise for autoneg. It used to only accept
copper NRZ modes.
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Barring the BNXT_FW_TO_ETHTOOL speed macros, which will be removed
in the next patch, update code to use the newer API.
No functional change.
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Refactor some NRZ/PAM4 link speed related logic into helper functions.
The NRZ and PAM4 link parameters are stored in separate structure fields.
The driver logic has to check whether it is in NRZ or PAM4 mode and
then use the appropriate field.
Refactor this logic into helper functions for better readability.
Reviewed-by: Damodharam Ammepalli <[email protected]>
Reviewed-by: Ajit Khaparde <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A future patch in this series will change the algorithm used to
determine ethtool speed and media modes. Extract the handling of
the unrelated pause, autoneg modes into an independent function.
Also separate FEC handling out of bnxt_fw_to_ethtool_*_spds().
No functional change.
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Recent kernels support changing the number of link lanes via ethtool.
This is useful for determining the appropriate signal mode to use when
a given link speed can be achieved using different lane configurations.
Accept the ethtool lanes parameter when configuring forced speed. If
there is no lanes parameter, select a default.
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add infrastructure to look up the enum ethtool_link_mode_bit_indices
from link information provided by the firmware. The link speed,
signal mode, and media type returned by firmware will be used to
look up the ethtool link mode.
The immediate benefit is that once the link mode is determined, we can
now use ethtool_params_from_link_mode() to fill the basic ethtool
parameters including the number of lanes. Lanes will be fully
supported in the next patch.
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
FW sends the async event to the driver when the device temperature goes
above or below the threshold values. Only notify hwmon if the
temperature is increasing to the next alert level, not when it is
decreasing.
Cc: Guenter Roeck <[email protected]>
Reviewed-by: Kashyap Desai <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Defer hwmon_notify_event() to bnxt_sp_task() workqueue because
hwmon_notify_event() can try to acquire a mutex shown in the stack trace
below. Modify bnxt_event_error_report() to return true if we need to
schedule bnxt_sp_task() to notify hwmon.
__schedule+0x68/0x520
hwmon_notify_event+0xe8/0x114
schedule+0x60/0xe0
schedule_preempt_disabled+0x28/0x40
__mutex_lock.constprop.0+0x534/0x550
__mutex_lock_slowpath+0x18/0x20
mutex_lock+0x5c/0x70
kobject_uevent_env+0x2f4/0x3d0
kobject_uevent+0x10/0x20
hwmon_notify_event+0x94/0x114
bnxt_hwmon_notify_event+0x40/0x70 [bnxt_en]
bnxt_event_error_report+0x260/0x290 [bnxt_en]
bnxt_async_event_process.isra.0+0x250/0x850 [bnxt_en]
bnxt_hwrm_handler.isra.0+0xc8/0x120 [bnxt_en]
bnxt_poll_p5+0x150/0x350 [bnxt_en]
__napi_poll+0x3c/0x210
net_rx_action+0x308/0x3b0
__do_softirq+0x120/0x3e0
Cc: Guenter Roeck <[email protected]>
Fixes: a19b4801457b ("bnxt_en: Event handler for Thermal event")
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Drop unneeded error checking.
devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Przemek Kitszel <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Recent FW interface update bumped the size of struct hwrm_func_cfg_input
above 128B which is the max some devices support.
Probe on Stratus (BCM957452) with FW 20.8.3.11 fails with:
bnxt_en ...: Unable to reserve tx rings
bnxt_en ...: 2nd rings reservation failed.
bnxt_en ...: Not enough rings available.
Once probe is fixed other errors pop up:
bnxt_en ...: Failed to set async event completion ring.
This is because __hwrm_send() rejects requests larger than
bp->hwrm_max_ext_req_len with -E2BIG. Since the driver doesn't
actually access any of the new fields, yet, trim the length.
It should be safe.
Similar workaround exists for backing_store_cfg_input.
Although that one mins() to a constant of 256, not 128
we'll effectively use here. Michael explains: "the backing
store cfg command is supported by relatively newer firmware
that will accept 256 bytes at least."
To make debugging easier in the future add a warning
for oversized requests.
Fixes: 754fbf604ff6 ("bnxt_en: Update firmware interface to 1.10.2.171")
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When we are trying to timestamp a TX packet, there may be
occasions when the TX timestamp register is still not
updated with the latest timestamp even if the timestamp
packet descriptor is marked as complete.
This usually happens in cases where the system is under
stress or flow control is affecting the transmit side.
We will solve this problem by saving the snapshot of the
timestamp register when we are posting the TX descriptor.
At this time, the register contains previously timestamped
packet's value and valid timestamp of the current packet must
be different than this.
Upon completion of the current descriptor, we will check if
the timestamp register is updated or not before timestamping
the skb. If not updated, we will schedule the ptp worker to
fetch the updated time later and timestamp the skb.
Also now we restrict number of outstanding PTP TX packet
requests to 1.
Reported-by: Simon White <[email protected]>
Link: https://lore.kernel.org/netdev/CACKFLikGdN9XPtWk-fdrzxdcD=+bv-GHBvfVfSpJzHY7hrW39g@mail.gmail.com/
Signed-off-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is strscpy() [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
bcm_enet_get_drvinfo() already uses strscpy(), let's match it's
implementation:
| static void bcm_enet_get_drvinfo(struct net_device *netdev,
| struct ethtool_drvinfo *drvinfo)
| {
| strscpy(drvinfo->driver, bcm_enet_driver_name, sizeof(drvinfo->driver));
| strscpy(drvinfo->bus_info, "bcm63xx", sizeof(drvinfo->bus_info));
| }
Note that now bcm_enet_get_drvinfo() and bcm_enetsw_get_drvinfo() do the
exact same thing.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-broadcom-bcm63xx_enet-c-v1-1-6823b3c3c443@google.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The driver gained a .ndo_poll_controller() at a time where the TX
cleaning process was always done from NAPI which makes this unnecessary.
See commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional")
for more background.
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit e76d44fe722761f5480b908e38c5ce1a2c2cb6d6.
We no longer accept drivers extending their use of the legacy
SR-IOV configuration APIs. Users should move to bridge offload.
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Newer versions of firmware will pre-reserve 1 VNIC for every possible
PF and VF function. Update the driver logic to take this into account
when assigning VNICs to the VFs. These pre-reserved VNICs for the
inactive VFs should be subtracted from the global pool before
assigning them to the active VFs.
Not doing so may cause discrepancies that ultimately may cause some VFs to
have insufficient VNICs to support features such as aRFS.
Signed-off-by: Vikas Gupta <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add these missing settings in the .ndo_set_vf_vlan() method.
Older firmware does not support the TPID setting so check for
proper support.
Remove the unused BNXT_VF_QOS flag.
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Newer FW will send a new async event when it detects that
the chip's temperature has crossed the configured threshold value.
The driver will now notify hwmon and will log a warning message.
Link: https://lore.kernel.org/netdev/[email protected]/
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Implement the sysfs attributes directly in the driver for
shutdown threshold temperature and pass an extra attribute group
to the hwmon core when registering the hwmon device.
Link: https://lore.kernel.org/netdev/[email protected]/
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
HWRM_TEMP_MONITOR_QUERY response now indicates various
threshold temperatures. Expose these threshold temperatures
through the hwmon sysfs using this mapping:
hwmon_temp_max : bp->warn_thresh_temp
hwmon_temp_crit : bp->crit_thresh_temp
hwmon_temp_emergency : bp->fatal_thresh_temp
hwmon_temp_max_alarm : temp >= bp->warn_thresh_temp
hwmon_temp_crit_alarm : temp >= bp->crit_thresh_temp
hwmon_temp_emergency_alarm : temp >= bp->fatal_thresh_temp
Link: https://lore.kernel.org/netdev/[email protected]/
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The use of hwmon_device_register_with_groups() is deprecated.
Modified the driver to use hwmon_device_register_with_info().
Driver currently exports only temp1_input through hwmon sysfs
interface. But FW has been modified to report more threshold
temperatures and driver want to report them through the
hwmon interface.
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This is in preparation for upcoming patches in the series.
Driver has to expose more threshold temperatures through the
hwmon sysfs interface. More code will be added and do not
want to overload bnxt.c.
Reviewed-by: Andy Gospodarek <[email protected]>
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Driver currently does hwmon device register and unregister
in open and close() respectively. As a result, user will not
be able to query hwmon temperature when interface is in
ifdown state.
Enhance it by moving the hwmon register/unregister to the
probe/remove functions.
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The main changes are the additional thermal thresholds in
hwrm_temp_monitor_query_output and the new async event to
report thermal errors.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Paolo Abeni <[email protected]>
|
|
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.
Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.
Cc: Michael Chan <[email protected]>
Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert these drivers from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.
None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.
While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.
There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.
So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.
[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/[email protected]/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/[email protected]/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/
Acked-by: Tony Luck <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid OOB writing or NULL pointer dereference.
Fixes: c5d511c49587 ("net: bcmasp: Add support for wake on net filters")
Signed-off-by: Hangyu Hua <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
for_each_available_child_of_node performs an of_node_get
on each iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull rdma updates from Jason Gunthorpe:
"Many small changes across the subystem, some highlights:
- Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma,
mthca, hns, and bnxt_re
- siw now works over tunnel and other netdevs with a MAC address by
removing assumptions about a MAC/GID from the connection manager
- "Doorbell Pacing" for bnxt_re - this is a best effort scheme to
allow userspace to slow down the doorbell rings if the HW gets full
- irdma egress VLAN priority, better QP/WQ sizing
- rxe bug fixes in queue draining and srq resizing
- Support more ethernet speed options in the core layer
- DMABUF support for bnxt_re
- Multi-stage MTT support for erdma to allow much bigger MR
registrations
- A irdma fix with a CVE that came in too late to go to -rc, missing
bounds checking for 0 length MRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits)
IB/hfi1: Reduce printing of errors during driver shut down
RDMA/hfi1: Move user SDMA system memory pinning code to its own file
RDMA/hfi1: Use list_for_each_entry() helper
RDMA/mlx5: Fix trailing */ formatting in block comment
RDMA/rxe: Fix redundant break statement in switch-case.
RDMA/efa: Fix wrong resources deallocation order
RDMA/siw: Call llist_reverse_order in siw_run_sq
RDMA/siw: Correct wrong debug message
RDMA/siw: Balance the reference of cep->kref in the error path
Revert "IB/isert: Fix incorrect release of isert connection"
RDMA/bnxt_re: Fix kernel doc errors
RDMA/irdma: Prevent zero-length STAG registration
RDMA/erdma: Implement hierarchical MTT
RDMA/erdma: Refactor the storage structure of MTT entries
RDMA/erdma: Renaming variable names and field names of struct erdma_mem
RDMA/hns: Support hns HW stats
RDMA/hns: Dump whole QP/CQ/MR resource in raw
RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp()
RDMA/mlx4: Copy union directly
RDMA/irdma: Drop unused kernel push code
...
|
|
Merge in late fixes to prepare for the 6.6 net-next PR.
No conflicts.
Signed-off-by: Paolo Abeni <[email protected]>
|
|
'tp->irq_max' value is either 1 [L16336] or 5 [L16354], as indicated in
tg3_get_invariants(). Therefore, 'i' can't exceed 4 in tg3_init_one()
that makes (i <= 4) always true. Moreover, 'intmbx' value set at the
last iteration is not used later in it's scope.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 78f90dcf184b ("tg3: Move napi_add calls below tg3_get_invariants")
Signed-off-by: Mikhail Kobuk <[email protected]>
Reviewed-by: Alexey Khoroshilov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
All callers of build_skb() (*) in bnxt are in NAPI context.
The budget checking is somewhat convoluted because in the shared
completion queue cases Rx packets are discarded by netpoll
by forcing an error (E). But that happens before skb allocation.
Only a call chain starting at __bnxt_poll_work() can lead to
an skb allocation and it checks budget (b).
* bnxt_rx_multi_page_skb
* bnxt_rx_skb
` bp->rx_skb_func
* bnxt_tpa_end
` bnxt_rx_pkt
E bnxt_force_rx_discard
E bnxt_poll_nitroa0
b __bnxt_poll_work
Use napi_build_skb() to take advantage of the skb cache.
In iperf tests with HW-GRO enabled it barely makes a difference
but in cases where HW-GRO is not as effective (or disabled) it
can give even a >10% boost (20.7Gbps -> 23.1Gbps).
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
While injecting PCIe errors to the upstream PCIe switch of
a BCM57810 NIC, system hangs/crashes were observed.
After several calls to bnx2x_tx_timout() complete,
bnx2x_nic_unload() is called to free up HW resources
and bnx2x_napi_disable() is called to release NAPI objects.
Later, when the EEH driver calls bnx2x_io_slot_reset() to
complete the recovery process, bnx2x attempts to disable
NAPI again by calling bnx2x_napi_disable() and freeing
resources which have already been freed, resulting in a
hang or crash.
Introduce a new flag to track the HW resource and NAPI
allocation state, refactor duplicated code into a single
function, check page pool allocation status before freeing,
and reduces debug output when a TX timeout event occurs.
Reviewed-by: Manish Chopra <[email protected]>
Tested-by: Abdul Haleem <[email protected]>
Tested-by: David Christensen <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Venkata Sai Duggi <[email protected]>
Signed-off-by: Thinh Tran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The tg3 driver will use kmalloc() under some conditions. Check the
frag_size and use slab_build_skb() when frag_size is 0. Silences
the warning introduced by commit ce098da1497c ("skbuff: Introduce
slab_build_skb()"):
Use slab_build_skb() instead
...
tg3_poll_work+0x638/0xf90 [tg3]
Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()")
Reported-by: Fiona Ebner <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]
Cc: Siva Reddy Kallam <[email protected]>
Cc: Prashant Sreedharan <[email protected]>
Cc: Michael Chan <[email protected]>
Cc: Bagas Sanjaya <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The Best practice is to return these
error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <[email protected]>
Acked-by: Doug Berger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The best practice is to return
these error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Acked-by: Doug Berger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a new tx_resets ring counter. This counter will be saved as
tx_total_resets across any reset. Since we currently do a full reset
in bnxt_sched_reset_txr(), the per ring counter will always be cleared
during reset. Only the tx_total_resets count will be meaningful and we
only display this under ethtool -S.
Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|