| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When the chip is configured to timestamp all receive packets, the
timestamp in the RX completion is only valid if the metadata
present flag is not set for packets received on the wire. In
addition, internal loopback packets will never have a valid timestamp
and the timestamp field will always be zero. We must exclude
any 0 value in the timestamp field because there is no way to
determine if it is a loopback packet or not.
Add a new function bnxt_rx_ts_valid() to check for all timestamp
valid conditions.
Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets")
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The wait_event_interruptible_timeout() function returns 0
if the timeout elapsed, -ERESTARTSYS if it was interrupted
by a signal, and the remaining jiffies otherwise if the
condition evaluated to true before the timeout elapsed.
Driver should have checked for zero return value instead of
a positive value.
MChan: Print a warning for -ERESTARTSYS. The close operation
will proceed anyway when wait_event_interruptible_timeout()
returns for any reason. Since we do the close no matter what,
we should not return this error code to the caller. Change
bnxt_close_nic() to a void function and remove all error
handling from some of the callers.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Vikas Gupta <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Kalesh AP <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Receive SKBs can go through the VF-rep path or the normal path.
skb_mark_for_recycle() is only called for the normal path. Fix it
to do it for both paths to fix possible stalled page pool shutdown
errors.
Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Vikas Gupta <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We are issuing HWRM_FUNC_RESET cmd to reset the device including
all reserved resources, but not clearing the reservations
within the driver struct. As a result, when the driver re-initializes
as part of resume, it believes that there is no need to do any
resource reservation and goes ahead and tries to allocate rings
which will eventually fail beyond a certain number pre-reserved by
the firmware.
Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Kalesh AP <[email protected]>
Reviewed-by: Ajit Khaparde <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/stmicro/stmmac/dwmac5.c
drivers/net/ethernet/stmicro/stmmac/dwmac5.h
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
drivers/net/ethernet/stmicro/stmmac/hwif.h
37e4b8df27bc ("net: stmmac: fix FPE events losing")
c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
net/ipv4/tcp_ao.c
9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk")
7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When flow_indr_dev_register() fails, bnxt_init_tc will free
bp->tc_info through kfree(). However, the caller function
bnxt_init_one() will ignore this failure and call
bnxt_shutdown_tc() on failure of bnxt_dl_register(), where
a use-after-free happens. Fix this issue by setting
bp->tc_info to NULL after kfree().
Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make bnxt compatible with the newly added netlink queue GET APIs.
Signed-off-by: Amritha Nambiar <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/170147336340.5260.6773000274196548907.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now with basic support for the new chip family, add the PCI IDs of the
new devices.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add new look up entries to convert the new supported speeds, advertised
speeds, etc to ethtool link modes.
Reviewed-by: Damodharam Ammepalli <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Modify bnxt_force_link_speed() to support the new speeds stored in
link_info->support_speeds2, including the new 400G speed.
Reviewed-by: Ajit Khaparde <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Newer firmware supporting PAM4 112Gbps speeds use new parameters in
firmware message structures. Detect the new firmware capability and
add basic logic to report and store these new fields.
Reviewed-by: Hongguang Gao <[email protected]>
Reviewed-by: Damodharam Ammepalli <[email protected]>
Reviewed-by: Ajit Khaparde <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add helper functions to refactor the logic that converts firmware
speed masks to ethtool speeds. Pass the phy_flags to
bnxt_get_ethtool_speeds() and the call chain. The refactoring and the
phy_flags will be needed when adding support for the new speeds in the
next patches.
Reviewed-by: Ajit Khaparde <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
These new completion types are supported on the new P7 chips.
These new types have commonalities with the legacy types. After
the refactoring, we mainly have to add new functions to handle the
the new meta data formats and the RX hash information in the new
types.
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Refactor bnxt_tpa_start() by adding bnxt_tpa_metadata() to gather the
metadata from the TPA_START completion. This makes it easier to
support the new P7 chip which has a modified TPA_START completion
structure with different metadata formats. We also add vlan_valid
and cfa_code_valid fields to the bnxt_tpa_info structure so that the
VLAN and VF rep logic can be common for all chips. The VLAN metadata
is now collected in bnxt_tpa_start() only when it is valid and the
vlan_valid field will be set. bnxt_tpa_end() can now use common VLAN
logic for all chips.
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Refactor the logic in the RX path that checks for the accelerated VLAN
tag by adding a new function. This will make it easier to support
the new receive logic on P7 chips.
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add new RX, TX, and TPA hardware interface structures and macros for the
P7 chips.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a new rss_cap field in the per device struct bnxt and move all
the RSS capability fields there. It will be easier to add new RSS
capabilities for the new P7 chips.
Signed-off-by: Ajit Khaparde <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The new chip family passes the Toggle bits to the driver in the NQE
notification. The driver now stores this value and sends it back to
hardware when it re-arms the RX and TX CQs. Together with the earlier
patch that guarantees the driver will only re-arm the CQ at the end of
NAPI polling if it has seen a new NQE, this method allows the hardware
to detect any dropped doorbells.
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The doorbell offset on P5 chips is hard coded. On the new P7 chips,
it is returned by the firmware. Simplify the logic that determines
this offset and store it in a new db_offset field in struct bnxt.
Also, provide this offset to the RoCE driver in struct bnxt_en_dev.
Reviewed-by: Kalesh AP <[email protected]>
Signed-off-by: Hongguang Gao <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Repurpose the BNXT_FLAG_CHIP_SR2 flag by renaming it to
BNXT_FLAG_CHIP_P7 since the SR2 chip never went to production. The SR2
statictics structure is also renamed for the P7 chip. Define the basic
P7 doorbell bits (Epoch. Toggle, etc) and implement the Epoch bit
logic. The next higher bit beyond the legal doorbell mask is the
Epoch bit used for doorbells on P7 chips. This bit is used by the
chip to detect dropped doorbells.
The 57608 chip ID belonging to the P7 family is also defined. Note
that the PCI ID is not added until the last patch in the series.
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This updated interface supports the new 5760X P7 chip family. It has
the changes to support the new link speeds/modes and other changes
for the basic L2 features.
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The current code determines the last backing store valid type during
bnxt_hwrm_func_backing_store_qcaps_v2(). In effect, the last type
is determined based on what firmware advertises. The more correct
way is to determine it based on what the driver is configuring. The
driver may not configure all the backing store types advertised by
firmware.
Move the logic to determine the last type to bnxt_backing_store_cfg_v2().
We need to pass the legacy enable flags to the function in case only
the legacy types are being configured.
Fixes: 236e237f8ffe ("bnxt_en: Add support for HWRM_FUNC_BACKING_STORE_CFG_V2 firmware calls")
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:
enum {
/* I/O channel is in normal state */
pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};
If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.
EEH driver gets error event
--> eeh_set_channel_state()
and set device to one of
error state above scheduler: tg3_reset_task() get
returned error from tg3_init_hw()
--> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device
To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state. (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.
Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.
Signed-off-by: Thinh Tran <[email protected]>
Tested-by: Venkata Sai Duggi <[email protected]>
Reviewed-by: David Christensen <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Link page pool instances to netdev for the drivers which
already link to NAPI. Unless the driver is doing something
very weird per-NAPI should imply per-netdev.
Add netsec as well, Ilias indicates that it fits the mold.
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
In preparation to support a new P7 chip which has a lot of similarities
with the P5 chip, rename the BNXT_FLAG_CHIP_P5 flag to
BNXT_FLAG_CHIP_P5_PLUS. This will make it clear that the flag is for
P5 and newer chips.
Also, since there are no additional P5 variants in production, rename
BNXT_FLAG_CHIP_P5_THOR() to BNXT_FLAG_CHIP_P5() to keep the naming
more simple.
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Ajit Khaparde <[email protected]>
Signed-off-by: Randy Schacher <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Modify the NAPI logic for the new doorbell mechanism on P7 chips.
These changes are compatible with the current P5 chips.
In the current logic, bnxt_poll_p5() services 1 or more CQs for each
MSIX. Each MSIX has an associated NQ and each NQ has 1 or more
associated CQs. If any CQ reaches NAPI budget, we'll stay in polling
mode and will unconditionally check and service all CQs until we exit
polling. We always re-arm all CQs when we exit polling.
To be compatible with the new Toggle bit mechanism in P7 chips, we need
to modify the logic so that we service and re-arm the CQ only if we
receive an NQE notification for work for that CQ. We add a new
had_nqe_notify bit to the cp_ring_info structure and it gets set when we
see the NQE notification for that CQ anytime during polling. We'll
service and re-arm only the CQs with the had_nqe_notify bits set.
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Modify the RX indexing logic for both RX ring and RX aggregation ring just
like the TX logic. Change it so that the index increments unbounded and
mask it only when needed.
Modify the existing RX macros so that the index is not masked. Add new
macros RING_RX()/RING_RX_AGG() to mask it only when needed to get the
index of rxr->rx_buf_ring[] and rxr->rx_agg_ring[].
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Change the TX ring logic so that the index increments unbounded and
mask it only when needed.
Modify the existing macros so that the index is not masked. Add a
new macro RING_TX() to mask it only when needed to get the index of
txr->tx_buf_ring[].
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This allows the doorbell related logic to mask the doorbell index
to the proper range before writing the doorbell.
The current code masks the doorbell index immediately to keep it in the
legal ranges for the most part. Subsequent patches will change the
logic so that the index increments unbounded and it only gets masked
before use. This is preparation work for the new chip that requires an
additional Epoch bit in the doorbell that needs to toggle when the index
has wrapped around.
This patch just adds the basic infrastructure and the logic is largely
unchanged. We now replace RING_CMP() with the new DB_RING_IDX() at
appropriate places where we mask the completion ring index before
writing the doorbell.
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Newer chips starting with 57600 will use this new firmware HWRM call to
configure backing store memory. Add this new call if it is supported
by the firmware.
Reviewed-by: Hongguang Gao <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use the new v2 firmware API if supported by the firmware. We now have the
infrastructure to support the v2 API.
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In bnxt_alloc_ctx_mem(), the logic to set up the context memory entries
and to allocate the context memory tables is done repetitively. Add
a helper function to simplify the code.
The setup of the Fast Path TQM entries relies on some information from
the Slow Path TQM entries. Copy the SP_TQM entries to the FP_TQM
entries to simplify the logic.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use the newly added pg_info field in bnxt_ctx_mem_type struct and
remove the standalone page info structures in bnxt_ctx_mem_info.
This now completes the reorganization of the context memory
structures to work better with the new and more flexible firmware
interface for newer chips.
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This will further improve the organization of the bnxt_ctx_mem_info
structure by moving the standalone page info structures into the
bnxt_ctx_mem_type array. Add the allocation and free logic first and
the next patch will migrate to use the new infrastructure.
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The current code uses a flat bnxt_ctx_mem_info structure to store 8
types of context memory for the NIC. All the context memory types
are very similar and have similar parameters. They can all share a
common structure to improve the organization. Also, new firmware
interface will provide a new API to retrieve each type of context
memory by calling the API repeatedly.
This patch reorganizes the bnxt_ctx_mem_info structure to fit better
with the new firmware interface. It will also work with the legacy
firmware interface. The flat fields in bnxt_ctx_mem_info are replaced
by the bnxt_ctx_mem_type array. The bnxt_mem_init array info will no
longer be needed.
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We always free bp->ctx right after calling bnxt_free_ctx_mem(), so just
free it at the end of that function to make things simpler.
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
bnxt_alloc_ctx_mem() calls bnxt_hwrm_func_backing_store_qcaps() to
allocate the memory for bp->ctx. Initialize bp->ctx with the allocated
memory and let the caller free it during unwind. The unwind logic is
already there, we just need to always set bp->ctx to the allocated
memory so the caller will always free it. This simplifies the logic
and makes it easier to expand on the backing store logic.
Reviewed-by: Pavan Chebbi <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Now that we use the cumulative consumer index scheme for TX completion,
we don't need to have one TX completion per TX packet in the xmit_more
code path. Set the TX_BD_FLAGS_NO_CMPL flag if xmit_more is true.
Fallback to one interrupt per packet if the ring is filled beyond
bp->tx_wake_thresh.
Also, move the wmb() to bnxt_txr_db_kick(). When xmit_more is true,
we'll skip the bnxt_txr_db_kick() call and there is no need to call
wmb() to sync. the TX BD data.
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We can now fully support sharing the same MSIX for all mqprio TX rings
belonging to the same ethtool channel with the new infrastructure:
1. Allocate the proper entries for cp_ring_arr in struct bnxt_cp_ring_info
to support the additional TX rings.
2. Populate the tx_ring array in struct bnxt_napi for all TX rings
sharing the same NAPI.
3. bnxt_num_tx_to_cp() returns the proper NQ/completion rings to support
the TX rings in the input.
4. Adjust bnxt_get_num_ring_stats() for the reduced number of ring
counters with the new scheme.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add 3 macros that handle to conversions between TC numbers and TX
ring numbers. These will help to clarify the existing logic and the
new logic in the next patch.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Up until now, each TX ring always requires a completion ring/NQ/MSIX.
bnxt_trim_rings() and the assignment of bp->cp_nr_rings always make
this assumption. This will no longer be true in the next patches, so
we refactor and add helper functions to determine the proper relationship
between TX rings and the required completion ring/NQ/MSIX. This patch
does not change the 1:1 relationship yet.
Note that on P5 chips, each RX and TX ring still requires a completion
ring. Only the number of NQs has been reduced. We should no longer call
bnxt_trim_rings() to adjust the RX and TX rings on P5 chips. Replace with
simple logic to check that RX + TX < CP and adjust accordingly.
bnxt_check_rings() should call _bnxt_get_max_rings() to get the raw
number of rings instead of bnxt_get_max_rings(). If we are about to
create TCs, bnxt_get_max_rings() would not be able to calculate the max
rings correctly.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For each mqprio TC, we allocate a set of TX rings to map to the new
hardware CoS queue. Expand the tx_ring pointer in struct bnxt_napi
to an array of 8 to support up to 8 TX rings, one for each TC.
Only array entry 0 is used at this time. The rest of the array
entries will be used in later patches.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add 2 helper functions to set coalescing for each RX and TX rings. This
will make it easier to expand the number of TX rings per MSIX in the
next patches.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In order to support multiple TX rings on the same MSIX, we'll use the
upper byte of the TX opaque field to store the ring index in the new
tx_napi_idx field. This tx_napi_idx field is currently always 0 until
more infrastructure is added in later patches.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
bnxt_tx_int() processes the only one TX ring from the bnxt_napi pointer.
To prepare for more TX rings associated with the bnxt_napi structure,
add a new __bnxt_tx_int() function that takes the bnxt_tx_ring_info
pointer to process that one TX ring. No functional change.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
These 2 constants were used for the one RX and one TX completion
ring pointer in the cpr->cp_ring_arr fixed array. Now that we've
changed to allocating the array for the exact number of entries to
support more TX rings, we no longer use these constants.
The array index as well as the type of completion ring (RX/TX) are
now encoded in the handle for the completion ring. This will allow
us to locate the completion ring during NAPI for any number of
completion rings sharing the same MSIX. In the following patches,
we'll be adding support for more TX rings associated with the same
MSIX vector.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
From the TX or RX ring structure, we need to find the corresponding
completion ring during initialization. On P5 chips, we use the MSIX/napi
entry to locate the completion ring because there is only one RX/TX
ring per MSIX. To allow multiple TX rings for each MSIX, we need
to add a direct pointer from the TX ring and RX ring structures.
This also simplifies the existing logic.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The cp_ring_arr is currently a fixed array of 2 pointers for the
TX and RX completion rings. These pointers are allocated during
ring initialization. Currntly, we support up to 2 completion rings
for each MSIX. In order to support more completion rings, we change
this fixed array to a pointer and allocate the required entries
during ring initialization. This patch keeps the current scheme of
allocating only 2 entries when needed. Later patches will expand
and allocate more entries when required.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
From the TX or RX ring structure, we need to find the corresponding
completion ring during initialization. On P5 chips, we use the MSIX/napi
entry to locate the completion ring because there is only one RX/TX
ring per MSIX. To allow multiple TX rings for each MSIX, we need
to add a direct pointer from the TX ring and RX ring structures.
This also simplifies the existing logic.
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|