aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2020-09-19net: b44: use true,false for bool variablesJason Yan1-4/+4
This addresses the following coccinelle warning: drivers/net/ethernet/broadcom/b44.c:2213:6-20: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/broadcom/b44.c:2218:2-16: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/broadcom/b44.c:2226:3-17: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/broadcom/b44.c:2230:3-17: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15bnxt: add pause frame statsJakub Kicinski1-0/+17
These stats are already reported in ethtool -S. Michael confirms they are equivalent to standard stats. v2: - fix sparse warning about endian by using the macro - use u64 for pointer type Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-14cnic: convert tasklets to use new tasklet_setup() APIAllen Pais1-10/+8
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <[email protected]> Signed-off-by: Allen Pais <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-10net: remove napi_hash_del() from driver-facing APIJakub Kicinski2-7/+6
We allow drivers to call napi_hash_del() before calling netif_napi_del() to batch RCU grace periods. This makes the API asymmetric and leaks internal implementation details. Soon we will want the grace period to protect more than just the NAPI hash table. Restructure the API and have drivers call a new function - __netif_napi_del() if they want to take care of RCU waits. Note that only core was checking the return status from napi_hash_del() so the new helper does not report if the NAPI was actually deleted. Some notes on driver oddness: - veth observed the grace period before calling netif_napi_del() but that should not matter - myri10ge observed normal RCU flavor - bnx2x and enic did not actually observe the grace period (unless they did so implicitly) - virtio_net and enic only unhashed Rx NAPIs The last two points seem to indicate that the calls to napi_hash_del() were a left over rather than an optimization. Regardless, it's easy enough to correct them. This patch may introduce extra synchronize_net() calls for interfaces which set NAPI_STATE_NO_BUSY_POLL and depend on free_netdev() to call netif_napi_del(). This seems inevitable since we want to use RCU for netpoll dev->napi_list traversal, and almost no drivers set IFF_DISABLE_NETPOLL. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-08bnx2x: Fix some kernel-doc warningsWang Hai1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:4238: warning: Excess function parameter 'netdev' description in 'bnx2x_setup_tc' drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:4238: warning: Excess function parameter 'tc' description in 'bnx2x_setup_tc' Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-07bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()Vasundhara Volam1-3/+4
bnxt_fw_reset_task() which runs from a workqueue can race with bnxt_remove_one(). For example, if firmware reset and VF FLR are happening at about the same time. bnxt_remove_one() already cancels the workqueue and waits for it to finish, but we need to do this earlier before the devlink reporters are destroyed. This will guarantee that the devlink reporters will always be valid when bnxt_fw_reset_task() is still running. Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-09-07bnxt_en: Avoid sending firmware messages when AER error is detected.Vasundhara Volam2-3/+7
When the driver goes through PCIe AER reset in error state, all firmware messages will timeout because the PCIe bus is no longer accessible. This can lead to AER reset taking many minutes to complete as each firmware command takes time to timeout. Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages when either firmware is in fatal error state or when pci_channel_offline() is true. It now takes a more reasonable 20 to 30 seconds to complete AER recovery. Fixes: b4fff2079d10 ("bnxt_en: Do not send firmware messages if firmware is in error state.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski15-114/+149
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <[email protected]>
2020-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds5-48/+83
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
2020-09-03net: systemport: Manage Wake-on-LAN clockFlorian Fainelli2-1/+10
It is necessary to manage the Wake-on-LAN clock to turn on the appropriate blocks for MPD or CFP-based packet matching to work otherwise we will not be able to reliably match packets during suspend. Reported-by: Blair Prescott <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03net: systemport: fetch and use clock resourcesFlorian Fainelli2-1/+30
We disable clocks shortly after probing the device to save as much power as possible in case the interface is never used. When bcm_sysport_open() is invoked, clocks are enabled, and disabled in bcm_sysport_stop(). A similar scheme is applied to the suspend/resume functions. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-03tg3: Fix soft lockup when tg3_reset_task() fails.Michael Chan1-4/+13
If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <[email protected]> Reported-by: Baptiste Covolato <[email protected]> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-02net: bcmgenet: fix mask check in bcmgenet_validate_flow()Denis Efremov1-1/+1
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest) instead. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Signed-off-by: Denis Efremov <[email protected]> Acked-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt: don't enable NAPI until rings are readyJakub Kicinski1-8/+4
Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <[email protected]> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: Setup default RSS map in all scenarios.Michael Chan1-9/+30
The recent changes to support user-defined RSS map assume that RX rings are always reserved and the default RSS map is set after the RX rings are successfully reserved. If the firmware spec is older than 1.6.1, no ring reservations are required and the default RSS map is not setup at all. In another scenario where the fw Resource Manager is older, RX rings are not reserved and we also end up with no valid RSS map. Fix both issues in bnxt_need_reserve_rings(). In both scenarios described above, we don't need to reserve RX rings so we need to call this new function bnxt_check_rss_map_no_rmgr() to setup the default RSS map when needed. Without valid RSS map, the NIC won't receive packets properly. Fixes: 1667cbf6a4eb ("bnxt_en: Add logical RSS indirection table structure.") Reviewed-by: Vasundhara Volam <[email protected]> Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: init RSS table for Minimal-Static VF reservationEdwin Peer1-8/+7
There are no VF rings available during probe when the device is configured using the Minimal-Static reservation strategy. In this case, the RSS indirection table can only be initialized later, during bnxt_open_nic(). However, this was not happening because the rings will already have been reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings() to return false in bnxt_reserve_rings() and bypass the RSS table init. Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into __bnxt_reserve_rings(), which is common to both paths and is called whenever ring configuration is changed. After doing this, the RSS table init that must be called from bnxt_init_one() happens implicitly via bnxt_set_default_rings(), necessitating doing the allocation earlier in order to avoid a null pointer dereference. Fixes: bd3191b5d87d ("bnxt_en: Implement ethtool -X to set indirection table.") Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: fix HWRM error when querying VF temperatureEdwin Peer1-4/+7
Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for VFs. This produces unpleasing error messages in the log when temp1_input is queried via the hwmon sysfs interface from a VF. The error is harmless and expected, so silence it and return unknown as the value. Since the device temperature is not particularly sensitive information, provide flexibility to change this policy in future by silencing the error rather than avoiding the HWRM call entirely for VFs. Fixes: cde49a42a9bb ("bnxt_en: Add hwmon sysfs support to read temperature") Cc: Marc Smith <[email protected]> Reported-by: Marc Smith <[email protected]> Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: Fix possible crash in bnxt_fw_reset_task().Michael Chan1-2/+8
bnxt_fw_reset_task() is run from a delayed workqueue. The current code is not cancelling the workqueue in the driver's .remove() method and it can potentially crash if the device is removed with the workqueue still pending. The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel the delayed workqueue in bnxt_remove_one(). bnxt_queue_fw_reset_work() also needs to check that this flag is set before scheduling. This will guarantee that no rescheduling will be done after it is cancelled. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: Fix PCI AER error recovery flowVasundhara Volam1-0/+3
When a PCI error is detected the PCI state could be corrupt, save the PCI state after initialization and restore it after the slot reset. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.Michael Chan1-9/+2
We are returning the wrong count for ETH_SS_STATS in get_sset_count() when XDP or TCs are enabled. In a recent commit, we got rid of irrelevant counters when the ring is RX only or TX only, but we did not make the proper adjustments for the count. As a result, when we have XDP or TCs enabled, we are returning an excess count because some of the rings are TX only. This causes ethtool -S to display extra counters with no counter names. Fix bnxt_get_num_ring_stats() by not assuming that all rings will always have RX and TX counters in combined mode. Fixes: 125592fbf467 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring") Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: Check for zero dir entries in NVRAM.Vasundhara Volam1-0/+3
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-26bnxt_en: Don't query FW when netif_running() is false.Pavan Chebbi1-1/+1
In rare conditions like two stage OS installation, the ethtool's get_channels function may be called when the device is in D3 state, leading to uncorrectable PCI error. Check netif_running() first before making any query to FW which involves writing to BAR. Fixes: db4723b3cd2d ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.") Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-24net: systemport: Fix memleak in bcm_sysport_probeDinghao Liu1-2/+4
When devm_kcalloc() fails, dev should be freed just like what we've done in the subsequent error paths. Fixes: 7b78be48a8eb6 ("net: systemport: Dynamically allocate number of TX rings") Signed-off-by: Dinghao Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva14-66/+66
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds21-693/+4535
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-4/+0
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-08-04 The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 9 day(s) which contain a total of 135 files changed, 4603 insertions(+), 1013 deletions(-). The main changes are: 1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko. 2) Add BPF iterator for map elements and to iterate all BPF programs for efficient in-kernel inspection, from Yonghong Song and Alexei Starovoitov. 3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid unwinder errors, from Song Liu. 4) Allow cgroup local storage map to be shared between programs on the same cgroup. Also extend BPF selftests with coverage, from YiFei Zhu. 5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM load instructions, from Jean-Philippe Brucker. 6) Follow-up fixes on BPF socket lookup in combination with reuseport group handling. Also add related BPF selftests, from Jakub Sitnicki. 7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for socket create/release as well as bind functions, from Stanislav Fomichev. 8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct xdp_statistics, from Peilin Ye. 9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime. 10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6} fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin. 11) Fix a bpftool segfault due to missing program type name and make it more robust to prevent them in future gaps, from Quentin Monnet. 12) Consolidate cgroup helper functions across selftests and fix a v6 localhost resolver issue, from John Fastabend. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-07-30bnxt_en: Remove superfluous memset()Li Heng1-2/+0
Fixes coccicheck warning: ./drivers/net/ethernet/broadcom/bnxt/bnxt.c:3730:19-37: WARNING: dma_alloc_coherent use in stats -> hw_stats already zeroes out memory, so memset is not needed dma_alloc_coherent use in status already zeroes out memory, so memset is not needed Reported-by: Hulk Robot <[email protected]> Signed-off-by: Li Heng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Add support for 'ethtool -d'Vasundhara Volam4-0/+94
Add support to dump PXP registers and PCIe statistics. Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Switch over to use the 64-bit software accumulated counters.Michael Chan3-53/+64
Now we can report all the full 64-bit CPU endian software accumulated counters instead of the hw counters, some of which may be less than 64-bit wide. Define the necessary macros to access the software counters. Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Accumulate all counters.Michael Chan2-2/+90
Now that we have the infrastructure in place, add the new function bnxt_accumulate_all_stats() to periodically accumulate and check for counter rollover of all ring stats and port stats. A chip bug was also discovered that could cause some ring counters to become 0 during DMA. Workaround by ignoring zeros on the affected chips. Some older frimware will reset port counters during ifdown. We need to check for that and free the accumulated port counters during ifdown to prevent bogus counter overflow detection during ifup. Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Retrieve hardware masks for port counters.Michael Chan1-5/+70
If supported by newer firmware, make the firmware call to query all the port counter masks. If not supported, assume 40-bit port counter masks. Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Retrieve hardware counter masks from firmware if available.Michael Chan1-0/+64
Newer firmware has a new call HWRM_FUNC_QSTATS_EXT to retrieve the masks of all ring counters. Make this call when supported to initialize the hardware masks of all ring counters. If the call is not available, assume 48-bit ring counter masks on P5 chips. Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Allocate additional memory for all statistics blocks.Michael Chan2-5/+26
Some of these DMAed hardware counters are not full 64-bit counters and so we need to accumulate them as they overflow. Allocate copies of these DMA statistics memory blocks with the same size for accumulation. The hardware counter widths are also counter specific so we allocate memory for masks that correspond to each counter. Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Refactor statistics code and structures.Michael Chan4-89/+76
The driver manages multiple statistics structures of different sizes. They are all allocated, freed, and handled practically the same. Define a new bnxt_stats_mem structure and common allocation and free functions for all staistics memory blocks. Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Use macros to define port statistics size and offset.Michael Chan2-5/+11
The port statistics structures have hard coded padding and offset. Define macros to make this look cleaner. Reviewed-by: Pavan Chebbi <[email protected]> Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Update firmware interface to 1.10.1.54.Michael Chan5-130/+390
Main changes are 200G support and fixing the definitions of discard and error counters to match the hardware definitions. Because the HWRM_PORT_PHY_QCFG message size has now exceeded the max. encapsulated response message size of 96 bytes from the PF to the VF, we now need to cap this message to 96 bytes for forwarding. The forwarded response only needs to contain the basic link status and speed information and can be capped without adding the new information. v2: Fix bnxt_re compile error. Cc: Selvin Xavier <[email protected]> Reviewed-by: Vasundhara Volam <[email protected]> Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-27bnxt_en: Remove PCIe non-counters from ethtool statisticsVasundhara Volam3-79/+1
Remove PCIe non-counters display from ethtool statistics, as they are not simple counters but register dump. The next few patches will add logic to detect counter roll-over and it won't work with these PCIe non-counters. There will be a follow up patch to get PCIe information via ethtool register dump. Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko1-4/+0
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller5-95/+99
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <[email protected]>
2020-07-22tg3: Avoid the use of one-element arrayGustavo A. R. Silva1-1/+1
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type 'u32 reserved2'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86 Tested-by: kernel test robot <[email protected]> Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/tg3-20200718.md Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-20net: bcmgenet: add missed clk_disable_unprepare in bcmgenet_probeZhang Changzhong1-2/+2
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: c80d36ff63a5 ("net: bcmgenet: Use devm_clk_get_optional() to get the clocks") Signed-off-by: Zhang Changzhong <[email protected]> Acked-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-20net: bcmgenet: fix error returns in bcmgenet_probe()Zhang Changzhong1-1/+1
The driver forgets to call clk_disable_unprepare() in error path after a success calling for clk_prepare_enable(). Fix to goto err_clk_disable if clk_prepare_enable() is successful. Fixes: 99d55638d4b0 ("net: bcmgenet: enable NETIF_F_HIGHDMA flag") Signed-off-by: Zhang Changzhong <[email protected]> Acked-by: Doug Berger <[email protected]> Acked-by: Florian fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-17net: bnxt: don't complain if TC flower can't be supportedJakub Kicinski2-6/+6
The fact that NETIF_F_HW_TC is not set should be a sufficient indication to the user that TC offloads are not supported. No need to bother users of older firmware versions with pointless warnings on every boot. Also, since the support is optional, bnxt_init_tc() should not return an error in case FW is old, similarly to how error is not returned when CONFIG_BNXT_FLOWER_OFFLOAD is not set. With that we can add an error message to the caller, to warn about actual unexpected failures. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-17net: bcmgenet: restore HFB filters on resumeDoug Berger2-77/+62
The Hardware Filter Block RAM may not be preserved when the GENET block is reset during a deep sleep, so it is not sufficient to only backup and restore the enables. This commit clears out the HFB block and reprograms the rxnfc rules when the system resumes from a suspended state. To support this the bcmgenet_hfb_create_rxnfc_filter() function is modified to access the register space directly so that it can't fail due to memory allocation issues. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-17net: bcmgenet: test RBUF_ACPI_EN when resumingDoug Berger1-3/+7
When the GENET driver resumes from deep sleep the UMAC_CMD register may not be accessible and therefore should not be accessed from bcmgenet_wol_power_up_cfg() if the GENET has been reset. This commit adds a check of the RBUF_ACPI_EN flag when Wake on Filter is enabled. A clear flag indicates that the GENET hardware must have been reset so the remainder of the hardware programming is bypassed. Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support") Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-17net: bcmgenet: test MPD_EN when resumingDoug Berger1-4/+8
When the GENET driver resumes from deep sleep the UMAC_CMD register may not be accessible and therefore should not be accessed from bcmgenet_wol_power_up_cfg() if the GENET has been reset. This commit adds a check of the MPD_EN flag when Wake on Magic Packet is enabled. A clear flag indicates that the GENET hardware must have been reset so the remainder of the hardware programming is bypassed. Fixes: 1a1d5106c1e3 ("net: bcmgenet: move clk_wol management to bcmgenet_wol") Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-2/+2
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/[email protected]/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <[email protected]> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <[email protected]> # IB Acked-by: Kalle Valo <[email protected]> # wireless drivers Reviewed-by: Chao Yu <[email protected]> # erofs Signed-off-by: Kees Cook <[email protected]>
2020-07-14bnx2x: convert to new udp_tunnel_nic infraJakub Kicinski3-123/+29
Fairly straightforward conversion - no need to keep track of the use count, and replay when ports get removed, also callbacks can just sleep. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-13net: sched: Pass qdisc reference in struct flow_block_offloadPetr Machata1-5/+4
Previously, shared blocks were only relevant for the pseudo-qdiscs ingress and clsact. Recently, a qevent facility was introduced, which allows to bind blocks to well-defined slots of a qdisc instance. RED in particular got two qevents: early_drop and mark. Drivers that wish to offload these blocks will be sent the usual notification, and need to know which qdisc it is related to. To that end, extend flow_block_offload with a "sch" pointer, and initialize as appropriate. This prompts changes in the indirect block facility, which now tracks the scheduler in addition to the netdevice. Update signatures of several functions similarly. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.