aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/altera/altera_tse_main.c
AgeCommit message (Collapse)AuthorFilesLines
2015-02-19net: eth: altera: Change reset_mac failure message masks from err to dbgVince Bridgers1-2/+10
This debug output is not really an error message since mac reset can fail if the phy clocks are gated, specifically when the phy has been placed in a powered down or isolation mode. The netdev output masks were changed from err to dbg, and comments added in the code. Signed-off-by: Vince Bridgers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-02-19net: eth: altera: Change access ports to mdio for all xMII applicationsVince Bridgers1-4/+4
Change use of Altera TSE's MDIO access from phy 0 registers to phy 1 registers. This allows support for GMII, MII, RGMII, and SGMII designs where the external PHY is always accesible through Altera TSE's MDIO phy 1 registers and Altera's PCS is accessible through MDIO phy 0 registers for SGMII applications. Signed-off-by: Vince Bridgers <[email protected]> Tested-by: Kai Lin Ng <[email protected]> Tested-by: Dalon Westergreen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-02Altera TSE: Add missing phydevKostya Belezko1-9/+6
Altera network device doesn't come up after ifconfig eth0 down ifconfig eth0 up The reason behind is clearing priv->phydev during tse_shutdown(). The phydev is not restored back at tse_open(). Resubmiting as to follow Tobias Klauser suggestion. phy_start/phy_stop are called on each ifup/ifdown and phy_disconnect is called once during the module removal. Signed-off-by: Kostya Belezko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-20net: ethernet: altera: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <[email protected]>
2014-10-05Altera TSE: Add support for no PHYWalter Lozano1-0/+8
This patch avoids PHY and MDIO probing if no PHY chip is present. This is the case mainly in optical links where there is no need for PHY chip, and therefore no need of MDIO. In this scenario Ethernet MAC is directly connected to an optical module through an external SFP transceiver. Signed-off-by: Walter Lozano <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-05Altera TSE: Move PHY get addr and MDIO createWalter Lozano1-21/+36
Move PHY get addr and MDIO create to a new function to improve readability and make it easier to avoid its usage. This will be useful for example in the case where there is no PHY chip. Signed-off-by: Walter Lozano <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-03net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser1-1/+0
There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-15Altera TSE: Disable Multicast filtering to workaround problemVince Bridgers1-0/+5
This patch disables multicast hash filtering if present in the hardware and uses promiscuous mode instead until the problem with multicast filtering has been debugged, integrated and tested. Signed-off-by: Vince Bridgers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-05-15Altera TSE: Fix sparse errors and warningsVince Bridgers1-57/+71
This patch fixes the many sparse errors and warnings contained in the initial submission of the Altera Triple Speed Ethernet driver, and a few minor cppcheck warnings. Changes are tested on ARM and NIOS2 example designs, and compile tested against multiple architectures. Typical issues addressed were as follows: altera_tse_ethtool.c:136:19: warning: incorrect type in argument 1 (different address spaces) altera_tse_ethtool.c:136:19: expected void const volatile [noderef] <asn:2>*addr altera_tse_ethtool.c:136:19: got unsigned int *<noident> ... altera_sgdma.c:129:31: warning: cast removes address space of expression Signed-off-by: Vince Bridgers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-04-26Altera TSE: Fix Panic in probe routine when phy probe failsVince Bridgers1-21/+24
This patch addresses a fault in the error recovery path of the probe routine where the netdev structure was not being unregistered properly leading to a panic only when the phy probe failed. Abbreviated panic stack seen is as follows: (free_netdev+0xXX) from (altera_tse_probe+0xXX) (altera_tse_probe+0xXX) from (platform_drv_probe+0xXX) (platform_drv_probe+0xXX) from (driver_probe_device+0xXX) (driver_probe_device+0xXX) from (__driver_attach+0xXX) (__driver_attach+0xXX) from (bus_for_each_dev+0xXX) (bus_for_each_dev+0xXX) from (driver_attach+0xXX) (driver_attach+0xXX) from (bus_add_driver+0xXX) (bus_add_driver+0xXX) from (driver_register+0xXX) (driver_register+0xXX) from (__platform_driver_register+0xXX) (__platform_driver_register+0xXX) from (altera_tse_driver_init+0xXX) (altera_tse_driver_init+0xXX) from (do_one_initcall+0xXX) (do_one_initcall+0xXX) from (kernel_init_freeable+0xXX) (kernel_init_freeable+0xXX) from (kernel_init+0xXX) (kernel_init+0xXX) from (ret_from_fork+0xXX) Signed-off-by: Vince Bridgers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-04-26Altera TSE: Set the Pause Quanta value to the IEEE default valueVince Bridgers1-0/+2
This patch initializes the pause quanta set for transmitted pause frames to the IEEE specified default of 0xffff. Signed-off-by: Vince Bridgers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-04-26Altera TSE: Work around unaligned DMA receive packet issue with Altera SGDMAVince Bridgers1-10/+20
This patch works around a recently discovered unaligned receive dma problem with the Altera SGMDA. The Altera SGDMA component cannot be configured to DMA data to unaligned addresses for receive packet operations from the Triple Speed Ethernet component because of a potential data transfer corruption that can occur. This patch addresses this issue by utilizing the shift 16 bits feature of the Altera Triple Speed Ethernet component and modifying the receive buffer physical addresses accordingly such that the target receive DMA address is always aligned on a 32-bit boundary. Signed-off-by: Vince Bridgers <[email protected]> Tested-by: Matthew Gerlach <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-26altera: Remove casts of pointer to same typeJoe Perches1-2/+2
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <[email protected]> Acked-by: Vince Bridgers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-17Altera TSE: Add main and header file for Altera Ethernet DriverVince Bridgers1-0/+1543
This patch adds the main driver and header file for the Altera Triple Speed Ethernet driver. Signed-off-by: Vince Bridgers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.