aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/dsa
AgeCommit message (Collapse)AuthorFilesLines
2019-02-15net: dsa: b53: Do not program CPU port's PVIDFlorian Fainelli1-1/+1
The CPU port is special and does not need to obey VLAN restrictions as far as untagged traffic goes, also, having the CPU port be part of a particular PVID is against the idea of keeping it tagged in all VLANs. Fixes: ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15net: dsa: bcm_sf2: Do not assume DSA master supports WoLFlorian Fainelli1-4/+6
We assume in the bcm_sf2 driver that the DSA master network device supports ethtool_ops::{get,set}_wol operations, which is not a given. Avoid de-referencing potentially non-existent function pointers and check them as we should. Fixes: 96e65d7f3f88 ("net: dsa: bcm_sf2: add support for Wake-on-LAN") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15net: dsa: b53: Properly account for VLAN filteringFlorian Fainelli2-5/+57
VLAN filtering can be built into the kernel, and also dynamically turned on/off through the bridge master device. Allow re-configuring the switch appropriately to account for that by deciding whether VLAN table (v_table) misses should lead to a drop or forward. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15net: dsa: b53: Fix default VLAN IDFlorian Fainelli1-13/+16
We were not consistent in how the default VID of a given port was defined, b53_br_leave() would make sure the VLAN ID would be either 0/1 depending on the switch generation, but b53_configure_vlan(), which is the default configuration would unconditionally set it to 1. The correct value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that mistake ever again, introduce a helper function: b53_default_pvid() to factor that out. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-7/+23
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend()Dan Carpenter1-1/+1
The value of ->num_ports comes from bcm_sf2_sw_probe() and it is less than or equal to DSA_MAX_PORTS. The ds->ports[] array is used inside the dsa_is_user_port() and dsa_is_cpu_port() functions. The ds->ports[] array is allocated in dsa_switch_alloc() and it has ds->num_ports elements so this leads to a static checker warning about a potential out of bounds read. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exitJohn David Anglin1-6/+22
The GPIO interrupt controller on the espressobin board only supports edge interrupts. If one enables the use of hardware interrupts in the device tree for the 88E6341, it is possible to miss an edge. When this happens, the INTn pin on the Marvell switch is stuck low and no further interrupts occur. I found after adding debug statements to mv88e6xxx_g1_irq_thread_work() that there is a race in handling device interrupts (e.g. PHY link interrupts). Some interrupts are directly cleared by reading the Global 1 status register. However, the device interrupt flag, for example, is not cleared until all the unmasked SERDES and PHY ports are serviced. This is done by reading the relevant SERDES and PHY status register. The code only services interrupts whose status bit is set at the time of reading its status register. If an interrupt event occurs after its status is read and before all interrupts are serviced, then this event will not be serviced and the INTn output pin will remain low. This is not a problem with polling or level interrupts since the handler will be called again to process the event. However, it's a big problem when using level interrupts. The fix presented here is to add a loop around the code servicing switch interrupts. If any pending interrupts remain after the current set has been handled, we loop and process the new set. If there are no pending interrupts after servicing, we are sure that INTn has gone high and we will get an edge when a new event occurs. Tested on espressobin board. Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.") Signed-off-by: John David Anglin <dave.anglin@bell.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11net: dsa: microchip: add switch offload forwarding supportTristram Ha1-3/+4
The flag offload_fwd_mark is set as the switch can forward frames by itself. This can be considered a fix to a problem introduced in commit c2e866911e254067 where the port membership are not set in sync. The flag offload_fwd_mark just needs to be set in tag_ksz.c to prevent the software bridge from forwarding duplicate multicast frames. Fixes: c2e866911e254067 ("microchip: break KSZ9477 DSA driver into two files") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: dsa: mv88e6xxx: SERDES support 2500BaseT via external PHYAndrew Lunn1-1/+3
By using an external PHY, ports 9 and 10 can support 2500BaseT. So set this link mode in the mask when validating. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: dsa: bcm_sf2: Allow looping back CFP rulesFlorian Fainelli1-3/+8
When the source and destination port of a CFP rule match, we must set the loopback bit enable to allow that, otherwise the frame is discarded. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: dsa: bcm_sf2: Add support for CFP statisticsFlorian Fainelli4-1/+112
Return CFP policer statistics (Green, Yellow or Red) as part of the standard ethtool statistics. This helps debug when CFP rules may not be hit (0 counter). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: dsa: bcm_sf2: Prepare for adding CFP statisticsFlorian Fainelli1-3/+21
In preparation for adding CFP statistics, we will need to overlay the standard B53 statistics, so create specific bcm_sf2_sw_* functions to call into their b53_common.c counterpart. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: dsa: bcm_sf2: Remove stats mutexFlorian Fainelli2-4/+0
We no longer need a dedicated statistics mutex since we leverage b53_common for statistics now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-12/+12
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07net: dsa: b53: Fix for failure when irq is not defined in dtArun Parameswaran1-3/+0
Fixes the issues with non BCM58XX chips in the b53 driver failing, when the irq is not specified in the device tree. Removed the check for BCM58XX in b53_srab_prepare_irq(), so the 'port->irq' will be set to '-EXIO' if the irq is not specified in the device tree. Fixes: 16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts") Fixes: b2ddc48a81b5 ("net: dsa: b53: Do not fail when IRQ are not initialized") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: dsa: mv88e6xxx: Prevent suspend to RAMMiquel Raynal1-0/+16
On one hand, the mv88e6xxx driver has a work queue called in loop which will attempt register accesses after MDIO bus suspension, that entirely freezes the platform during suspend. On the other hand, the DSA core is not ready yet to support suspend to RAM operation because so far there is no way to recover reliably the switch configuration. To avoid the kernel to freeze when suspending with a switch driven by the mv88e6xxx driver, we choose to prevent the driver suspension and in the same way, the whole platform. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06dsa: bcm_sf2: use flow_rule infrastructurePablo Neira Ayuso1-35/+67
Update this driver to use the flow_rule infrastructure, hence we can use the same code to populate hardware IR from ethtool_rx_flow and the cls_flower interfaces. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05net: dsa: mv88e6xxx: Fix counting of ATU violationsAndrew Lunn1-9/+12
The ATU port vector contains a bit per port of the switch. The code wrongly used it as a port number, and incremented a port counter. This resulted in the wrong interfaces counter being incremented, and potentially going off the end of the array of ports. Fix this by using the source port ID for the violation, which really is a port number. Reported-by: Chris Healy <Chris.Healy@zii.aero> Tested-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 65f60e4582bd ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04net: phy: fixed-phy: Drop GPIO from fixed_phy_add()Linus Walleij1-1/+1
All users of the fixed_phy_add() pass -1 as GPIO number to the fixed phy driver, and all users of fixed_phy_register() pass -1 as GPIO number as well, except for the device tree MDIO bus. Any new users should create a proper device and pass the GPIO as a descriptor associated with the device so delete the GPIO argument from the calls and drop the code looking requesting a GPIO in fixed_phy_add(). In fixed phy_register(), investigate the "fixed-link" node and pick the GPIO descriptor from "link-gpios" if this property exists. Move the corresponding code out of of_mdio.c as the fixed phy code anyways requires OF to be in use. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: dsa: mt7530: support the 7530 switch on the Mediatek MT7621 SoCGreg Ungerer2-39/+66
The MediaTek MT7621 SoC device contains a 7530 switch, and the existing linux kernel 7530 DSA switch driver can be used with it. The bulk of the changes required stem from the 7621 having different regulator and pad setup. The existing setup of these in the 7530 driver appears to be very specific to its implemtation in the Mediatek 7623 SoC. (Not entirely surprising given the 7623 is a quad core ARM based SoC, and the 7621 is a dual core, dual thread MIPS based SoC). Create a new devicetree type, "mediatek,mt7621", to support the 7530 switch in the 7621 SoC. There appears to be no usable ID register to distinguish it from a 7530 in other hardware at runtime. This is used to carry out the appropriate configuration and setup. Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2019-01-27net: dsa: mv88e6xxx: Fix serdes irq setup going recursiveAndrew Lunn1-1/+1
Duec to a typo, mv88e6390_serdes_irq_setup() calls itself, rather than mv88e6390x_serdes_irq_setup(). It then blows the stack, and shortly after the machine blows up. Fixes: 2defda1f4b91 ("net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390X") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: dsa: qca8k: disable delay for RGMII modeVinod Koul1-12/+4
In RGMII mode we should not have any delay in port MAC, so disable the delay. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+13
Completely minor snmp doc conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: dsa: realtek-smi: fix OF child-node lookupJohan Hovold1-5/+13
Use the new of_get_compatible_child() helper to look up child nodes to avoid ever matching non-child nodes elsewhere in the tree. Also fix up the related struct device_node leaks. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Cc: stable <stable@vger.kernel.org> # 4.19: 36156f9241cb0 Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: dsa: lantiq_gswip: drop bogus drvdata checkJohan Hovold1-3/+0
The platform-device driver data is set on successful probe and will never be NULL on remove (or we have much bigger problems). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: dsa: lantiq_gswip: fix OF child-node lookupsJohan Hovold1-7/+9
Use the new of_get_compatible_child() helper to look up child nodes to avoid ever matching non-child nodes elsewhere in the tree. Also fix up the related struct device_node leaks. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Cc: stable <stable@vger.kernel.org> # 4.20 Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: dsa: lantiq_gswip: fix use-after-free on failed probeJohan Hovold1-1/+4
Make sure to disable and deregister the switch on late probe errors to avoid use-after-free when the device-resource-managed switch is freed. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Cc: stable <stable@vger.kernel.org> # 4.20 Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10net: dsa: mv88x6xxx: mv88e6390 errataAndrew Lunn3-0/+128
The 6390 copper ports have an errata which require poking magic values into undocumented magic registers and then performing a software reset. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: dsa: mt7530: Drop unused GPIO includeLinus Walleij1-1/+0
This driver uses GPIO descriptors only, <linux/of_gpio.h> is not used so drop the include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: dsa: microchip: Drop unused GPIO includesLinus Walleij1-2/+0
This driver does not use the old GPIO includes so drop them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-27net: dsa: bcm_sf2: Propagate error value from mdio_writeKangjie Lu1-4/+3
Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's return their error codes upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20net: dsa: microchip: fix unicast frame leakTristram Ha1-4/+4
Port partitioning is done by enabling UNICAST_VLAN_BOUNDARY and changing the default port membership of 0x7f to other values such that there is no communication between ports. In KSZ9477 the member for port 1 is 0x41; port 2, 0x42; port 3, 0x44; port 4, 0x48; port 5, 0x50; and port 7, 0x60. Port 6 is the host port. Setting a zero value can be used to stop port from receiving. However, when UNICAST_VLAN_BOUNDARY is disabled and the unicast addresses are already learned in the dynamic MAC table, setting zero still allows devices connected to those ports to communicate. This does not apply to multicast and broadcast addresses though. To prevent these leaks and make the function of port membership consistent UNICAST_VLAN_BOUNDARY should never be disabled. Note that UNICAST_VLAN_BOUNDARY is enabled by default in KSZ9477. Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: dsa: mv88e6xxx: Add missing watchdog ops for 6320 familyAndrew Lunn1-0/+2
The 6320 family of switches uses the same watchdog registers as the 6390. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17net: dsa: mv88e6xxx: set ethtool regs versionVivien Didelot1-1/+1
Currently the ethtool_regs version is set to 0 for all DSA drivers. Use this field to store the chip ID to simplify the pretty dump of any interfaces registered by the "dsa" driver. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: dsa: ksz: Rename NET_DSA_TAG_KSZ to _KSZ9477Tristram Ha2-2/+2
Rename the tag Kconfig option and related macros in preparation for addition of new KSZ family switches with different tag formats. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10net: dsa: ksz: Add reset GPIO handlingMarek Vasut2-0/+19
Add code to handle optional reset GPIO in the KSZ switch driver. The switch has a reset GPIO line which can be controlled by the CPU, so make sure it is configured correctly in such setups. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Cc: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+3
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03mv88e6060: disable hardware level MAC learningAnderson Luiz Alves1-7/+3
Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: rename ksz_9477_reg.h to ksz9477_reg.hTristram Ha3-2/+2
Rename ksz_9477_reg.h to ksz9477_reg.h for consistency as the product name is always KSZ####. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: break KSZ9477 DSA driver into two filesTristram Ha8-1242/+1903
Break KSZ9477 DSA driver into two files in preparation to add more KSZ switch drivers. Add common functions in ksz_common.h so that other KSZ switch drivers can access code in ksz_common.c. Add ksz_spi.h for common functions used by KSZ switch SPI drivers. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: rename ksz_spi.c to ksz9477_spi.cTristram Ha3-8/+8
Rename ksz_spi.c to ksz9477_spi.c and update Kconfig in preparation to add more KSZ switch drivers. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: rename some functions with ksz9477 prefixTristram Ha1-57/+59
Rename some functions with ksz9477 prefix to separate chip specific code from common code. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: clean up codeTristram Ha1-4/+4
Clean up code according to patch check suggestions. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net: dsa: microchip: replace license with GPLTristram Ha4-54/+10
Replace license with GPL. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: dsa: mv88e6xxx: Work around mv886e6161 SERDES missing MII_PHYSID2Andrew Lunn1-5/+16
We already have a workaround for a couple of switches whose internal PHYs only have the Marvel OUI, but no model number. We detect such PHYs and give them the 6390 ID as the model number. However the mv88e6161 has two SERDES interfaces in the same address range as its internal PHYs. These suffer from the same problem, the Marvell OUI, but no model number. As a result, these SERDES interfaces were getting the same PHY ID as the mv88e6390, even though they are not PHYs, and the Marvell PHY driver was trying to drive them. Add a special case to stop this from happen. Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
2018-11-11net: dsa: mv88e6xxx: Fix clearing of stats countersAndrew Lunn1-0/+2
The mv88e6161 would sometime fail to probe with a timeout waiting for the switch to complete an operation. This operation is supposed to clear the statistics counters. However, due to a read/modify/write, without the needed mask, the operation actually carried out was more random, with invalid parameters, resulting in the switch not responding. We need to preserve the histogram mode bits, so apply a mask to keep them. Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390XAndrew Lunn3-11/+25
The 6390X family has 8 SERDES interfaces. When ports 9 and 10 are not using all their SERDES interfaces, the unused ones can be assigned to ports 2-8. Add support for interrupts from SERDES interfaces connected to these lower ports. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.