aboutsummaryrefslogtreecommitdiff
path: root/drivers/misc/vmw_vmci
AgeCommit message (Collapse)AuthorFilesLines
2024-05-22Merge tag 'char-misc-6.10-rc1' of ↵Linus Torvalds2-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.10-rc1. Nothing major here, just lots of new drivers and updates for apis and new hardware types. Included in here are: - big IIO driver updates with more devices and drivers added - fpga driver updates - hyper-v driver updates - uio_pruss driver removal, no one uses it, other drivers control the same hardware now - binder minor updates - mhi driver updates - excon driver updates - counter driver updates - accessability driver updates - coresight driver updates - other hwtracing driver updates - nvmem driver updates - slimbus driver updates - spmi driver updates - other smaller misc and char driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits) misc: ntsync: mark driver as "broken" to prevent from building spmi: pmic-arb: Add multi bus support spmi: pmic-arb: Register controller for bus instead of arbiter spmi: pmic-arb: Make core resources acquiring a version operation spmi: pmic-arb: Make the APID init a version operation spmi: pmic-arb: Fix some compile warnings about members not being described dt-bindings: spmi: Deprecate qcom,bus-id dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe() spmi: hisi-spmi-controller: Do not override device identifier dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references spmi: make spmi_bus_type const extcon: adc-jack: Document missing struct members extcon: realtek: Remove unused of_gpio.h extcon: usbc-cros-ec: Convert to platform remove callback returning void extcon: usb-gpio: Convert to platform remove callback returning void extcon: max77843: Convert to platform remove callback returning void extcon: max3355: Convert to platform remove callback returning void extcon: intel-mrfld: Convert to platform remove callback returning void ...
2024-05-03vmci: prevent speculation leaks by sanitizing event in event_deliver()Hagar Gamal Halim Hemdan1-1/+5
Coverity spotted that event_msg is controlled by user-space, event_msg->event_data.event is passed to event_deliver() and used as an index without sanitization. This change ensures that the event index is sanitized to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Only compile tested, no access to HW. Fixes: 1d990201f9bb ("VMCI: event handling implementation.") Cc: stable <stable@kernel.org> Signed-off-by: Hagar Gamal Halim Hemdan <hagarhem@amazon.com> Link: https://lore.kernel.org/stable/20231127193533.46174-1-hagarhem%40amazon.com Link: https://lore.kernel.org/r/20240430085916.4753-1-hagarhem@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-03VMCI: Fix an error handling path in vmci_guest_probe_device()Christophe JAILLET1-2/+8
After a successful pci_iomap_range() call, pci_iounmap() should be called in the error handling path, as already done in the remove function. Add the missing call. The corresponding call was added in the remove function in commit 5ee109828e73 ("VMCI: dma dg: allocate send and receive buffers for DMA datagrams") Fixes: e283a0e8b7ea ("VMCI: dma dg: add MMIO access to registers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Vishnu Dasa <vishnu.dasa@broadcom.com> Link: https://lore.kernel.org/r/a35bbc3876ae1da70e49dafde4435750e1477be3.1713961553.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-25VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY useDamien Le Moal1-2/+1
In vmci_guest_probe_device(), remove the reference to PCI_IRQ_LEGACY by using PCI_IRQ_ALL_TYPES instead of an explicit OR of all IRQ types. Link: https://lore.kernel.org/r/20240325070944.3600338-14-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01VMCI: Fix possible memcpy() run-time warning in ↵Vasiliy Kovalev1-1/+2
vmci_datagram_invoke_guest_handler() The changes are similar to those given in the commit 19b070fefd0d ("VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()"). Fix filling of the msg and msg_payload in dg_info struct, which prevents a possible "detected field-spanning write" of memcpy warning that is issued by the tracking mechanism __fortify_memcpy_chk. Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://lore.kernel.org/r/20240219105315.76955-1-kovalev@altlinux.org Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-01VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()Harshit Mogalapalli1-1/+2
Syzkaller hit 'WARNING in dg_dispatch_as_host' bug. memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg" at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24) WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237 dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237 Some code commentry, based on my understanding: 544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size) /// This is 24 + payload_size memcpy(&dg_info->msg, dg, dg_size); Destination = dg_info->msg ---> this is a 24 byte structure(struct vmci_datagram) Source = dg --> this is a 24 byte structure (struct vmci_datagram) Size = dg_size = 24 + payload_size {payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32. 35 struct delayed_datagram_info { 36 struct datagram_entry *entry; 37 struct work_struct work; 38 bool in_dg_host_queue; 39 /* msg and msg_payload must be together. */ 40 struct vmci_datagram msg; 41 u8 msg_payload[]; 42 }; So those extra bytes of payload are copied into msg_payload[], a run time warning is seen while fuzzing with Syzkaller. One possible way to fix the warning is to split the memcpy() into two parts -- one -- direct assignment of msg and second taking care of payload. Gustavo quoted: "Under FORTIFY_SOURCE we should not copy data across multiple members in a structure." Reported-by: syzkaller <syzkaller@googlegroups.com> Suggested-by: Vegard Nossum <vegard.nossum@oracle.com> Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240105164001.2129796-2-harshit.m.mogalapalli@oracle.com Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-01VMCI: Use struct_size() in kmalloc()Harshit Mogalapalli1-2/+2
Use struct_size() instead of open coding. Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240105164001.2129796-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Kees Cook <keescook@chromium.org>
2024-01-17Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds2-15/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2023-12-15VMCI: Remove VMCI_HANDLE_ARRAY_HEADER_SIZE and VMCI_HANDLE_ARRAY_MAX_CAPACITYChristophe JAILLET1-6/+0
Remove VMCI_HANDLE_ARRAY_HEADER_SIZE and VMCI_HANDLE_ARRAY_MAX_CAPACITY that are unused. Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/00547fe74efe329b266eb8074c41f286758a3c64.1702125347.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15VMCI: Remove handle_arr_calc_size()Christophe JAILLET1-9/+3
Use struct_size() instead of handle_arr_calc_size(). This is much more conventional. While at it, use size_add() when computing the needed size in vmci_handle_arr_append_entry(). This prevents from (unlikely) overflow when computing the new size to reallocate. Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/84e7f2d8e7c4c2eab68f958307d56546978f76e3.1702125347.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-01VMCI: Annotate struct vmci_handle_arr with __counted_byChristophe JAILLET1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/56bef519d982218176b59bbba64a3a308d8733d5.1696689091.git.christophe.jaillet@wanadoo.fr Signed-off-by: Kees Cook <keescook@chromium.org>
2023-04-27Merge tag 'char-misc-6.4-rc1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ...
2023-04-05vmci_host: fix a race condition in vmci_host_poll() causing GPFDae R. Jeong1-1/+7
During fuzzing, a general protection fault is observed in vmci_host_poll(). general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926 <- omitting registers -> Call Trace: <TASK> lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162 add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22 poll_wait include/linux/poll.h:49 [inline] vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174 vfs_poll include/linux/poll.h:88 [inline] do_pollfd fs/select.c:873 [inline] do_poll fs/select.c:921 [inline] do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015 __do_sys_ppoll fs/select.c:1121 [inline] __se_sys_ppoll+0x2cc/0x330 fs/select.c:1101 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Example thread interleaving that causes the general protection fault is as follows: CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context) ----- ----- // Read uninitialized context context = vmci_host_dev->context; // Initialize context vmci_host_dev->context = vmci_ctx_create(); vmci_host_dev->ct_type = VMCIOBJ_CONTEXT; if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { // Dereferencing the wrong pointer poll_wait(..., &context->host_context); } In this scenario, vmci_host_poll() reads vmci_host_dev->context first, and then reads vmci_host_dev->ct_type to check that vmci_host_dev->context is initialized. However, since these two reads are not atomically executed, there is a chance of a race condition as described above. To fix this race condition, read vmci_host_dev->context after checking the value of vmci_host_dev->ct_type so that vmci_host_poll() always reads an initialized context. Reported-by: Dae R. Jeong <threeearcat@gmail.com> Fixes: 8bf503991f87 ("VMCI: host side driver implementation.") Signed-off-by: Dae R. Jeong <threeearcat@gmail.com> Link: https://lore.kernel.org/r/ZCGFsdBAU4cYww5l@dragonet Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()Uladzislau Rezki (Sony)2-2/+2
The kvfree_rcu() macro's single-argument form is deprecated. Therefore switch to the new kvfree_rcu_mightsleep() variant. The goal is to avoid accidental use of the single-argument forms, which can introduce functionality bugs in atomic contexts and latency bugs in non-atomic contexts. Cc: Bryan Tan <bryantan@vmware.com> Cc: Vishnu Dasa <vdasa@vmware.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2023-01-22Merge 6.2-rc5 into char-misc-nextGreg Kroah-Hartman1-30/+19
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20VMCI: Use threaded irqs instead of taskletsVishnu Dasa1-30/+19
The vmci_dispatch_dgs() tasklet function calls vmci_read_data() which uses wait_event() resulting in invalid sleep in an atomic context (and therefore potentially in a deadlock). Use threaded irqs to fix this issue and completely remove usage of tasklets. [ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145 [ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd [ 20.264645] preempt_count: 101, expected: 0 [ 20.264646] RCU nest depth: 0, expected: 0 [ 20.264647] 1 lock held by vmtoolsd/762: [ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock] [ 20.264658] Preemption disabled at: [ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci] [ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1 [ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020 [ 20.264668] Call trace: [ 20.264669] dump_backtrace+0xc4/0x130 [ 20.264672] show_stack+0x24/0x80 [ 20.264673] dump_stack_lvl+0x88/0xb4 [ 20.264676] dump_stack+0x18/0x34 [ 20.264677] __might_resched+0x1a0/0x280 [ 20.264679] __might_sleep+0x58/0x90 [ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci] [ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci] [ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150 [ 20.264688] tasklet_action+0x40/0x50 [ 20.264689] __do_softirq+0x23c/0x6b4 [ 20.264690] __irq_exit_rcu+0x104/0x214 [ 20.264691] irq_exit_rcu+0x1c/0x50 [ 20.264693] el1_interrupt+0x38/0x6c [ 20.264695] el1h_64_irq_handler+0x18/0x24 [ 20.264696] el1h_64_irq+0x68/0x6c [ 20.264697] preempt_count_sub+0xa4/0xe0 [ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0 [ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci] [ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci] [ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci] [ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport] [ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport] [ 20.264713] vsock_connect+0x278/0x330 [vsock] [ 20.264715] __sys_connect_file+0x8c/0xc0 [ 20.264718] __sys_connect+0x84/0xb4 [ 20.264720] __arm64_sys_connect+0x2c/0x3c [ 20.264721] invoke_syscall+0x78/0x100 [ 20.264723] el0_svc_common.constprop.0+0x68/0x124 [ 20.264724] do_el0_svc+0x38/0x4c [ 20.264725] el0_svc+0x60/0x180 [ 20.264726] el0t_64_sync_handler+0x11c/0x150 [ 20.264728] el0t_64_sync+0x190/0x194 Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Suggested-by: Zack Rusin <zackr@vmware.com> Reported-by: Nadav Amit <namit@vmware.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Fixes: 463713eb6164 ("VMCI: dma dg: add support for DMA datagrams receive") Cc: <stable@vger.kernel.org> # v5.18+ Cc: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bryan Tan <bryantan@vmware.com> Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Link: https://lore.kernel.org/r/20221130070511.46558-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20VMCI: check context->notify_page after call to get_user_pages_fast() to ↵George Kennedy1-0/+2
avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25use less confusing names for iov_iter direction initializersAl Viro1-3/+3
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-09misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()Alexander Potapenko1-0/+2
`struct vmci_event_qp` allocated by qp_notify_peer() contains padding, which may carry uninitialized data to the userspace, as observed by KMSAN: BUG: KMSAN: kernel-infoleak in instrument_copy_to_user ./include/linux/instrumented.h:121 instrument_copy_to_user ./include/linux/instrumented.h:121 _copy_to_user+0x5f/0xb0 lib/usercopy.c:33 copy_to_user ./include/linux/uaccess.h:169 vmci_host_do_receive_datagram drivers/misc/vmw_vmci/vmci_host.c:431 vmci_host_unlocked_ioctl+0x33d/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:925 vfs_ioctl fs/ioctl.c:51 ... Uninit was stored to memory at: kmemdup+0x74/0xb0 mm/util.c:131 dg_dispatch_as_host drivers/misc/vmw_vmci/vmci_datagram.c:271 vmci_datagram_dispatch+0x4f8/0xfc0 drivers/misc/vmw_vmci/vmci_datagram.c:339 qp_notify_peer+0x19a/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1479 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 vmci_qp_broker_alloc+0x96/0xd0 drivers/misc/vmw_vmci/vmci_queue_pair.c:1940 vmci_host_do_alloc_queuepair drivers/misc/vmw_vmci/vmci_host.c:488 vmci_host_unlocked_ioctl+0x24fd/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:927 ... Local variable ev created at: qp_notify_peer+0x54/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1456 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 Bytes 28-31 of 48 are uninitialized Memory access of size 48 starts at ffff888035155e00 Data copied to user address 0000000020000100 Use memset() to prevent the infoleaks. Also speculatively fix qp_notify_peer_local(), which may suffer from the same problem. Reported-by: syzbot+39be4da489ed2493ba25@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.") Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20221104175849.2782567-1-glider@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-09misc/vmw_vmci: Use kmap_local_page() in vmci_queue_pair.cFabio M. De Francesco1-8/+8
kmap() is being deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as the mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and still valid. Since its use in vmci_queue_pair.c is safe everywhere, replace kmap() with kmap_local_page(). Cc: "Venkataramanan, Anirudh" <anirudh.venkataramanan@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20220901135714.16481-1-fmdefrancesco@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24VMCI: Add support for ARM64Vishnu Dasa3-1/+17
Add support for ARM64 architecture so that the driver can now be built and VMCI device can be used. Update Kconfig file to allow the driver to be built on ARM64 as well. Fail vmci_guest_probe_device() on ARM64 if the device does not support MMIO register access. Lastly, add virtualization specific barriers which map to actual memory barrier instructions on ARM64, because it is required in case of ARM64 for queuepair (de)queuing. Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Cyprien Laplace <claplace@vmware.com> Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20220414193316.14356-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-24misc: vmw_vmci: replace usage of found with dedicated list iterator variableJakob Koschel1-8/+7
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220324073151.66305-1-jakobkoschel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18VMCI: Release notification_bitmap in error pathVishnu Dasa1-1/+2
notification_bitmap may not be released when VMCI_CAPS_DMA_DATAGRAM capability is missing from the device. Add missing 'err_free_notification_bitmap' label and use it instead of 'err_free_data_buffers' to avoid this. Fixes: eed2298d9360 ("VMCI: dma dg: detect DMA datagram capability") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Rajesh Jalisatgi <rjalisatgi@vmware.com> Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20220318060040.31621-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18VMCI: Check exclusive_vectors when freeing interrupt 1Vishnu Dasa1-1/+3
free_irq() may be called to free an interrupt that was not allocated. Add missing 'if' statement to check for exclusive_vectors when freeing interrupt 1. Fixes: cc68f2177fcb ("VMCI: dma dg: register dummy IRQ handlers for DMA datagrams") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Rajesh Jalisatgi <rjalisatgi@vmware.com> Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/20220318055843.30606-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25VMCI: Fix some error handling paths in vmci_guest_probe_device()Christophe JAILLET1-9/+9
The 'err_remove_vmci_dev_g' error label is not at the right place. This could lead to un-released resource. There is also a missing label. If pci_alloc_irq_vectors() fails, the previous vmci_event_subscribe() call must be undone. Acked-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/959218ce3b135197946d85cd9453551cd04fa5da.1645734041.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25VMCI: No need to clear memory after a dma_alloc_coherent() callChristophe JAILLET1-4/+2
dma_alloc_coherent() already clear the allocated memory, there is no need to explicitly call memset(). This saves a few cycles and a few lines of code. Acked-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3e8c0bfaa77500e22d6c90f249da1c53dbae716e.1645734041.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25VMCI: Fix the description of vmci_check_host_caps()Christophe JAILLET1-3/+3
vmci_check_host_caps() doesn't return a bool but an int. Fix the description accordingly. Fixes: 782f24453536 ("VMCI: fix error handling path when registering guest driver") Acked-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/c181bec88aab1145d3868d61b7e52d53923f8206.1645734041.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: add support for DMA datagrams receiveJorgen Hansen1-24/+79
Use the DMA based receive operation instead of the ioread8_rep based datagram receive when DMA datagrams are supported. In the receive operation, configure the header to point to the page aligned VMCI_MAX_DG_SIZE part of the receive buffer using s/g configuration for the header. This ensures that the existing dispatch routine can be used with little modification. Initiate the receive by writing the lower 32 bit of the buffer to the VMCI_DATA_IN_LOW_ADDR register, and wait for the busy flag to be changed by the device using a wait queue. The existing dispatch routine for received datagrams is reused for the DMA datagrams with a few modifications: - the receive buffer is always the maximum size for DMA datagrams (IO ports would try with a shorter buffer first to reduce overhead of the ioread8_rep operation). - for DMA datagrams, datagrams are provided contiguous in the buffer as opposed to IO port datagrams, where they can start on any page boundary Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-9-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: add support for DMA datagrams sendsJorgen Hansen1-2/+43
Use DMA based send operation from the transmit buffer instead of the iowrite8_rep based datagram send when DMA datagrams are supported. The outgoing datagram is sent as inline data in the VMCI transmit buffer. Once the header has been configured, the send is initiated by writing the lower 32 bit of the buffer base address to the VMCI_DATA_OUT_LOW_ADDR register. Only then will the device process the header and the datagram itself. Following that, the driver busy waits (it isn't possible to sleep on the send path) for the header busy flag to change - indicating that the send is complete. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-8-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: allocate send and receive buffers for DMA datagramsJorgen Hansen1-9/+62
If DMA datagrams are used, allocate send and receive buffers in coherent DMA memory. This is done in preparation for the send and receive datagram operations, where the buffers are used for the exchange of data between driver and device. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-7-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: register dummy IRQ handlers for DMA datagramsJorgen Hansen1-3/+39
Register dummy interrupt handlers for DMA datagrams in preparation for DMA datagram receive operations. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-6-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: set OS page sizeJorgen Hansen1-0/+4
Tell the device the page size used by the OS. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-5-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: detect DMA datagram capabilityJorgen Hansen1-0/+11
Detect the VMCI DMA datagram capability, and if present, ack it to the device. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-4-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: add MMIO access to registersJorgen Hansen1-19/+48
Detect the support for MMIO access through examination of the length of the region requested in BAR1. If it is 256KB, the VMCI device supports MMIO access to registers. If MMIO access is supported, map the area of the region used for MMIO access (64KB size at offset 128KB). Add wrapper functions for accessing 32 bit register accesses through either MMIO or IO ports based on device configuration. Sending and receiving datagrams through iowrite8_rep/ioread8_rep is left unchanged for now, and will be addressed in a later change. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-3-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21misc: vmw_vmci: Switch to kvfree_rcu() APIUladzislau Rezki (Sony)2-6/+3
Instead of invoking a synchronize_rcu() to free a pointer after a grace period we can directly make use of new API that does the same but in more efficient way. Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Link: https://lore.kernel.org/r/20211215111845.2514-6-urezki@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-27VMCI: fix NULL pointer dereference when unmapping queue pairWang Hai1-2/+4
I got a NULL pointer dereference report when doing fuzz test: Call Trace: qp_release_pages+0xae/0x130 qp_host_unregister_user_memory.isra.25+0x2d/0x80 vmci_qp_broker_unmap+0x191/0x320 ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0 vmci_host_unlocked_ioctl+0x59f/0xd50 ? do_vfs_ioctl+0x14b/0xa10 ? tomoyo_file_ioctl+0x28/0x30 ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0 __x64_sys_ioctl+0xea/0x120 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae When a queue pair is created by the following call, it will not register the user memory if the page_store is NULL, and the entry->state will be set to VMCIQPB_CREATED_NO_MEM. vmci_host_unlocked_ioctl vmci_host_do_alloc_queuepair vmci_qp_broker_alloc qp_broker_alloc qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM; When unmapping this queue pair, qp_host_unregister_user_memory() will be called to unregister the non-existent user memory, which will result in a null pointer reference. It will also change VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be present in this operation. Only when the qp broker has mem, it can unregister the user memory when unmapping the qp broker. Only when the qp broker has no mem, it can register the user memory when mapping the qp broker. Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.") Cc: stable <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24misc: vmw_vmci: return the correct errno codeJunlin Yang1-1/+1
When kzalloc failed, should return -ENOMEM rather than -EINVAL. Signed-off-by: Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210619112854.1720-1-angkery@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05misc: vmw_vmci: explicitly initialize vmci_datagram payloadTetsuo Handa1-1/+1
KMSAN complains that vmci_check_host_caps() left the payload part of check_msg uninitialized. ===================================================== BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 5.11.0-rc7+ #4 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack+0x21c/0x280 kmsan_report+0xfb/0x1e0 kmsan_internal_check_memory+0x202/0x520 kmsan_check_memory+0xd/0x10 iowrite8_rep+0x86/0x380 vmci_guest_probe_device+0xf0b/0x1e70 pci_device_probe+0xab3/0xe70 really_probe+0xd16/0x24d0 driver_probe_device+0x29d/0x3a0 device_driver_attach+0x25a/0x490 __driver_attach+0x78c/0x840 bus_for_each_dev+0x210/0x340 driver_attach+0x89/0xb0 bus_add_driver+0x677/0xc40 driver_register+0x485/0x8e0 __pci_register_driver+0x1ff/0x350 vmci_guest_init+0x3e/0x41 vmci_drv_init+0x1d6/0x43f do_one_initcall+0x39c/0x9a0 do_initcall_level+0x1d7/0x259 do_initcalls+0x127/0x1cb do_basic_setup+0x33/0x36 kernel_init_freeable+0x29a/0x3ed kernel_init+0x1f/0x840 ret_from_fork+0x1f/0x30 Uninit was created at: kmsan_internal_poison_shadow+0x5c/0xf0 kmsan_slab_alloc+0x8d/0xe0 kmem_cache_alloc+0x84f/0xe30 vmci_guest_probe_device+0xd11/0x1e70 pci_device_probe+0xab3/0xe70 really_probe+0xd16/0x24d0 driver_probe_device+0x29d/0x3a0 device_driver_attach+0x25a/0x490 __driver_attach+0x78c/0x840 bus_for_each_dev+0x210/0x340 driver_attach+0x89/0xb0 bus_add_driver+0x677/0xc40 driver_register+0x485/0x8e0 __pci_register_driver+0x1ff/0x350 vmci_guest_init+0x3e/0x41 vmci_drv_init+0x1d6/0x43f do_one_initcall+0x39c/0x9a0 do_initcall_level+0x1d7/0x259 do_initcalls+0x127/0x1cb do_basic_setup+0x33/0x36 kernel_init_freeable+0x29a/0x3ed kernel_init+0x1f/0x840 ret_from_fork+0x1f/0x30 Bytes 28-31 of 36 are uninitialized Memory access of size 36 starts at ffff8881675e5f00 ===================================================== Fixes: 1f166439917b69d3 ("VMCI: guest side driver implementation.") Cc: <stable@vger.kernel.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/20210402121742.3917-2-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg structTetsuo Handa1-1/+1
KMSAN complains that the vmci_use_ppn64() == false path in vmci_dbell_register_notification_bitmap() left upper 32bits of bitmap_set_msg.bitmap_ppn64 member uninitialized. ===================================================== BUG: KMSAN: uninit-value in kmsan_check_memory+0xd/0x10 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc7+ #4 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack+0x21c/0x280 kmsan_report+0xfb/0x1e0 kmsan_internal_check_memory+0x484/0x520 kmsan_check_memory+0xd/0x10 iowrite8_rep+0x86/0x380 vmci_send_datagram+0x150/0x280 vmci_dbell_register_notification_bitmap+0x133/0x1e0 vmci_guest_probe_device+0xcab/0x1e70 pci_device_probe+0xab3/0xe70 really_probe+0xd16/0x24d0 driver_probe_device+0x29d/0x3a0 device_driver_attach+0x25a/0x490 __driver_attach+0x78c/0x840 bus_for_each_dev+0x210/0x340 driver_attach+0x89/0xb0 bus_add_driver+0x677/0xc40 driver_register+0x485/0x8e0 __pci_register_driver+0x1ff/0x350 vmci_guest_init+0x3e/0x41 vmci_drv_init+0x1d6/0x43f do_one_initcall+0x39c/0x9a0 do_initcall_level+0x1d7/0x259 do_initcalls+0x127/0x1cb do_basic_setup+0x33/0x36 kernel_init_freeable+0x29a/0x3ed kernel_init+0x1f/0x840 ret_from_fork+0x1f/0x30 Local variable ----bitmap_set_msg@vmci_dbell_register_notification_bitmap created at: vmci_dbell_register_notification_bitmap+0x50/0x1e0 vmci_dbell_register_notification_bitmap+0x50/0x1e0 Bytes 28-31 of 32 are uninitialized Memory access of size 32 starts at ffff88810098f570 ===================================================== Fixes: 83e2ec765be03e8a ("VMCI: doorbell implementation.") Cc: <stable@vger.kernel.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/20210402121742.3917-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24vmci_host: print unexpanded names of ioctl requests in debug messagesGleb Fotengauer-Malinovskiy1-1/+1
__stringify macro function expands its arguments, but in this messages we expect to see ioctl request name instead of it's _IOC macro expansion. $ cat stringify.c #include <stdio.h> #include <asm/ioctl.h> #define __stringify_1(x) #x #define __stringify(x) __stringify_1(x) #define VMCI_DO_IOCTL(ioctl_name) \ char *name = __stringify(IOCTL_VMCI_ ## ioctl_name); int main() { VMCI_DO_IOCTL(INIT_CONTEXT) printf("%s\n", name); } $ cc stringify.c $ ./a.out (((0U) << (((0+8)+8)+14)) | (((7)) << (0+8)) | (((0xa0)) << 0) | ((0) << ((0+8)+8))) Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Link: https://lore.kernel.org/r/20210302153346.300416-1-glebfm@altlinux.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-09drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queueSabyrzhan Tasbolatov1-0/+3
syzbot found WARNING in qp_broker_alloc[1] in qp_host_alloc_queue() when num_pages is 0x100001, giving queue_size + queue_page_size bigger than KMALLOC_MAX_SIZE for kzalloc(), resulting order >= MAX_ORDER condition. queue_size + queue_page_size=0x8000d8, where KMALLOC_MAX_SIZE=0x400000. [1] Call Trace: alloc_pages include/linux/gfp.h:547 [inline] kmalloc_order+0x40/0x130 mm/slab_common.c:837 kmalloc_order_trace+0x15/0x70 mm/slab_common.c:853 kmalloc_large include/linux/slab.h:481 [inline] __kmalloc+0x257/0x330 mm/slub.c:3959 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:682 [inline] qp_host_alloc_queue drivers/misc/vmw_vmci/vmci_queue_pair.c:540 [inline] qp_broker_create drivers/misc/vmw_vmci/vmci_queue_pair.c:1351 [inline] qp_broker_alloc+0x936/0x2740 drivers/misc/vmw_vmci/vmci_queue_pair.c:1739 Reported-by: syzbot+15ec7391f3d6a1a7cc7d@syzkaller.appspotmail.com Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com> Link: https://lore.kernel.org/r/20210209102612.2112247-1-snovitoll@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26VMCI: Enforce queuepair max size for IOCTL_VMCI_QUEUEPAIR_ALLOCJorgen Hansen1-4/+8
When create the VMCI queue pair tracking data structures on the host side, the IOCTL for creating the VMCI queue pair didn't validate the queue pair size parameters. This change adds checks for this. This avoids a memory allocation issue in qp_host_alloc_queue, as reported by nslusarek@gmx.net. The check in qp_host_alloc_queue has also been updated to enforce the maximum queue pair size as defined by VMCI_MAX_GUEST_QP_MEMORY. The fix has been verified using sample code supplied by nslusarek@gmx.net. Reported-by: nslusarek@gmx.net Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/1611160420-30573-1-git-send-email-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26VMCI: Use set_page_dirty_lock() when unregistering guest memoryJorgen Hansen1-1/+1
When the VMCI host support releases guest memory in the case where the VM was killed, the pinned guest pages aren't locked. Use set_page_dirty_lock() instead of set_page_dirty(). Testing done: Killed VM while having an active VMCI based vSocket connection and observed warning from ext4. With this fix, no warning was observed. Ran various vSocket tests without issues. Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.") Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/1611160360-30299-1-git-send-email-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26VMCI: Stop log spew when qp allocation isn't possibleJorgen Hansen1-1/+1
VMCI queue pair allocation is disabled, if a VM is in FT mode. In these cases, VMware Tools may still once in a while attempt to create a vSocket stream connection, resulting in multiple warnings in the kernel logs. Therefore downgrade the error log to a debug log. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/1611160340-30158-1-git-send-email-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26misc/vmw_vmci: fix typomateng1-1/+1
change 'addres' to 'address' Signed-off-by: mateng <mateng@yulong.com> Link: https://lore.kernel.org/r/20210126084010.1941-1-ayowoe@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: vmw_vmci: fix kernel info-leak by initializing dbells in ↵Anant Thazhemadam1-1/+1
vmci_ctx_get_chkpt_doorbells() A kernel-infoleak was reported by syzbot, which was caused because dbells was left uninitialized. Using kzalloc() instead of kmalloc() fixes this issue. Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-28VMCI: check return value of get_user_pages_fast() for errorsAlex Dewar1-4/+6
In a couple of places in qp_host_get_user_memory(), get_user_pages_fast() is called without properly checking for errors. If e.g. -EFAULT is returned, this negative value will then be passed on to qp_release_pages(), which expects a u64 as input. Fix this by only calling qp_release_pages() when we have a positive number returned. Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20200825164522.412392-1-alex.dewar90@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-29vmci_host: get rid of pointless access_ok()Al Viro1-2/+0
get_user_pages_fast() doesn't need the caller to check that. NB: reachable only from ioctl(2) and only under USER_DS Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-20vsock/vmci: make vmci_vsock_cb_host_called staticMao Wenan1-1/+1
When using make C=2 drivers/misc/vmw_vmci/vmci_driver.o to compile, below warning can be seen: drivers/misc/vmw_vmci/vmci_driver.c:33:6: warning: symbol 'vmci_vsock_cb_host_called' was not declared. Should it be static? This patch make symbol vmci_vsock_cb_host_called static. Fixes: b1bba80a4376 ("vsock/vmci: register vmci_transport only when VMCI guest/host are active") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.