aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2022-07-19mfd: intel_soc_pmic_bxtwc: Fix spelling in the commentAndy Shevchenko1-5/+5
There are a few of spelling issues in the comment, fix them. While at it, fix indentation in the MODULE_AUTHOR() parameter and update copyright years. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-11-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Drop unneeded castingAndy Shevchenko1-1/+1
The casting from size_t to ssize_t is not needed in addr_store(), drop it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-10-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Use sysfs_emit() instead of sprintf()Andy Shevchenko1-2/+2
sysfs_emit() is preferred over sprintf() when formatting the value to be returned to user space in show() functions, because it knows about sysfs buffer specifics and has sanity checks. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-9-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Use bits.h macros for all masksAndy Shevchenko1-10/+11
Currently we are using BIT(), but GENMASK(). Make use of the latter one as well (far less error-prone, far more concise). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-8-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Drop redundant ACPI_PTR()Andy Shevchenko1-1/+1
The driver depends on ACPI (via MFD_INTEL_PMC_BXT), ACPI_PTR() resolution is always the same. Otherwise a compiler may produce a warning. That said, the rule of thumb either ugly ifdeffery with ACPI_PTR or none should be used in a driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-7-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to ↵Andy Shevchenko1-4/+3
pm_sleep_ptr() etc Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based kernel configuration guards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-6-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Extend use of temporary variable for struct deviceAndy Shevchenko1-11/+8
Extend use of temporary variable for struct device to make code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-5-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Use dev_err_probe()Andy Shevchenko1-60/+26
Simplify the mux error path a bit by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-4-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Convert to use platform_get/set_drvdata()Andy Shevchenko1-2/+2
We have the specific helpers for platform device to set and get its driver data. Convert driver to use them instead of open coded variants. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-3-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Create sysfs attributes using core driver's facilityAndy Shevchenko1-16/+7
Driver core takes care of sysfs attributes. Use this facility instead of doing it explicitly in ->probe() and ->remove(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-2-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_bxtwc: Don't shadow error codes in show()/store()Andy Shevchenko1-7/+9
kstrtox() along with regmap API can return different error codes based on circumstances. Don't shadow them when returning to the caller. While at it, remove rather confusing message from addr_store(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628221747.33956-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel-lpss: Add Intel Meteor Lake-P PCI IDsAndy Shevchenko1-0/+13
Add Intel Meteor Lake-P LPSS PCI IDs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220628223047.34301-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: mt6397: Add basic support for MT6331+MT6332 PMICAngeloGioacchino Del Regno2-1/+55
Add support for the MT6331 PMIC with MT6332 Companion PMIC, found in MT6795 Helio X10 smartphone platforms. This combo has support for multiple devices but, for a start, only the following have been implemented: - Regulators (two instances, one in MT6331, one in MT6332) - RTC (MT6331) - Keys (MT6331) - Interrupts (MT6331 also dispatches MT6332's interrupts) There's more to be implemented, especially for MT6332, which will come at a later stage. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220627123954.64299-1-angelogioacchino.delregno@collabora.com
2022-07-19mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cellsSamuel Holland1-0/+9
These PMICs all contain a compatible GPIO controller. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220616060915.48325-3-samuel@sholland.org
2022-07-19mfd: db8500-prcmu: Drop duplicated word "the" in the commentsJiang Jian1-1/+1
There is an unexpected word "the" in the comments that needs to be dropped. Line 801: * This function sets the the operating point of the ARM. ------- Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220621103839.96847-1-jiangjian@cdjrlc.com
2022-07-19mfd: intel_soc_pmic_chtwc: Switch from __maybe_unused to pm_sleep_ptr() etcAndy Shevchenko1-4/+4
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less heavier for builds than the use of __maybe_unused attributes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220616171009.43524-2-andriy.shevchenko@linux.intel.com
2022-07-19mfd: intel_soc_pmic_chtwc: Use dev_err_probe()Andy Shevchenko1-12/+7
Simplify the mux error path a bit by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220616171009.43524-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: tc6393xb: Make disable callback return voidUwe Kleine-König1-3/+2
All implementations return 0, so simplify accordingly. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220619082655.53728-1-u.kleine-koenig@pengutronix.de
2022-07-19mfd: dln2: Automatically detect and fill endpoint pointersAndy Shevchenko1-13/+4
The usb_find_common_endpoints() finds and fills the endpoints in accordance with their types. Use it to automatically detect and fill endpoint pointers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220617182338.32402-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: pm8008: Remove driver data structure pm8008_dataLee Jones1-33/+20
Maintaining a local driver data structure that is never shared outside of the core device is an unnecessary complexity. Half of the attributes were not used outside of a single function, one of which was not used at all. The remaining 2 are generic and can be passed around as required. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-07-19mfd: twl: Remove platform data supportUwe Kleine-König1-318/+5
There is no in-tree machine that provides a struct twl4030_platform_data since commit e92fc4f04a34 ("ARM: OMAP2+: Drop legacy board file for LDP"). So assume dev_get_platdata() returns NULL in twl_probe() and simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220614152148.252820-1-u.kleine-koenig@pengutronix.de
2022-07-19mfd: cros_ec: Add SCP Core-1 as a new CrOS EC MCUTinghan Shen1-0/+5
MT8195 System Companion Processors(SCP) is a dual-core RISC-V MCU. Add a new CrOS feature ID to represent the SCP's 2nd core. The 1st core is referred to as 'core 0', and the 2nd core is referred to as 'core 1'. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220601112201.15510-16-tinghan.shen@mediatek.com
2022-07-19mfd: mt6358-irq: Add MT6357 PMIC supportFabien Parent1-0/+24
Add MT6357 PMIC IRQ support. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531124959.202787-6-fparent@baylibre.com
2022-07-19mfd: mt6397-core: Add MT6357 PMIC supportFabien Parent1-0/+44
Adds support for PMIC keys, Regulator, and RTC for the MT6357 PMIC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531124959.202787-5-fparent@baylibre.com
2022-07-19mfd: max77620: Fix refcount leak in max77620_initialise_fpsMiaoqian Lin1-0/+2
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 327156c59360 ("mfd: max77620: Add core driver for MAX77620/MAX20024") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220601043222.64441-1-linmq006@gmail.com
2022-07-19syscon: Use %pa to format the variable of resource_size_t typeAndy Shevchenko1-2/+1
Instead of explicit casting, use %pa specifier to format the variable of resource_size_t type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220531202404.70282-1-andriy.shevchenko@linux.intel.com
2022-07-19mfd: t7l66xb: Drop platform disable callbackUwe Kleine-König1-5/+1
None of the in-tree instantiations of struct t7l66xb_platform_data provides a disable callback. So better don't dereference this function pointer unconditionally. As there is no user, drop it completely instead of calling it conditional. This is a preparation for making platform remove callbacks return void. Fixes: 1f192015ca5b ("mfd: driver for the T7L66XB TMIO SoC") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220530192430.2108217-3-u.kleine-koenig@pengutronix.de
2022-07-19mfd: asic3: Make asic3_gpio_remove() return voidUwe Kleine-König1-6/+3
Up to now asic3_gpio_remove() returns zero unconditionally. This makes it easier to see in the caller that there is no error to handle. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220530192430.2108217-2-u.kleine-koenig@pengutronix.de
2022-07-19mfd: max77714: Update Luca Ceresoli's e-mail addressLuca Ceresoli1-2/+2
My Bootlin address is preferred from now on. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220603155727.1232061-4-luca@lucaceresoli.net
2022-07-19Merge branches 'ib-mfd-acpi-for-rafael-5.20', ↵Lee Jones3-56/+180
'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-5.20' and 'ib-mfd-soc-bcm-5.20' into ibs-for-mfd-merged
2022-07-19gpio: ucb1400: Remove platform setup and teardown supportUwe Kleine-König1-4/+2
There is no user of these callbacks. The motivation for this change is to stop returning an error code from the remove callback. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-14Merge tag 'iio-for-5.20a' of ↵Greg Kroah-Hartman1-90/+182
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO new device support, features and minor fixes for 5.20 Several on-running cleanup efforts dominate this time, plus the DMA safety alignment issue identified due to improved understanding of the restrictions as a result of Catalin Marinas' efforts in that area. One immutable branch in here due to MFD and SPMI elements needed for the qcom-rradc driver. Device support * bmi088 - Add support for bmi085 (accelerometer part of IMU) - Add support for bmi090l (accelerometer part of IMU) * mcp4922 - Add support for single channel device MCP4921 * rzg2l-adc - Add compatible and minor tweaks to support RZ/G2UL ADC * sca3300 - Add support for scl3300 including refactoring driver to support multiple device types and cleanup noticed whilst working on driver. * spmi-rradc - New driver for Qualcomm SPMI Round Robin ADC including necessary additional utility functions in SPMI core and related MFD driver. * ti-dac55781 - Add compatible for DAC121C081 which is very similar to existing parts. Features * core - Warn on iio_trigger_get() on an unregistered IIO trigger. * bma400 - Triggered buffer support - Activity and step counting - Misc driver improvements such as devm and header ordering * cm32181 - Add PM support. * cros_ec - Sensor location support * sx9324 - Add precharge resistor setting - Add internal compensation resistor setting - Add CS idle/sleep mode. * sx9360 - Add precharge resistor setting * vl53l0x - Handle reset GPIO, regulator and relax handling of irq type. Cleanup and minor fixes: Treewide changes - Cleanup of error handling in remove functions in many drivers. - Update dt-binding maintainers for a number of ADI bindings. - Several sets of conversion of drivers from device tree specific to generic device properties. Includes fixing up various related header and Kconfig issues. - Drop include of of.h from iio.h and fix up drivers that need to include it directly. - More moves of clusters of drivers into appropriate IIO_XXX namespaces. - Tree wide fix of a long running bug around DMA safety requirements. IIO was using __cacheline_aligned to pad iio_priv() structures. This worked for a long time by coincidence, but correct alignment is ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather than every driver in future. Note, there have been no reports of this bug in the wild, and it may not happen on any platforms supported by upstream, so no rush to backport these fixes. Other cleanup * core - Switch to ida_alloc()/free() - Drop unused iio_get_time_res() - Octal permissions and DEVICE_ATTR_* macros. - Cleanup bared unsigned usage. * MAINTAINERS - Add include/dt-bindings/iio/ to the main IIO entry. * ad5380 - Comment syntax fix. * ad74413r - Call to for_each_set_bit_from(), with from value as 0 replaced. * ad7768-1 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * adxl345 - Fix wrong address in dt-binding example. * adxl367 - Drop extra update of FIFO watermark. * at91-sama5d2 - Limit requested watermark to the hwfifo size. * bmg160, bme680 - Typos * cio-dac - Switch to iomap rather than direct use of ioports * kxsd9 - Replace CONFIG_PM guards with new PM macros that let the compiler cleanly remove the unused code and structures when !CONFIG_PM * lsm6dsx - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move to Namespace. * meson_saradc - general cleanup. - Avoid attaching resources to iio_dev->dev - Use same struct device for all error messages - Convert to dev_err_probe() and use local struct device *dev to reduce code complexity. - Use devm_clk_get_optional() instead of hand rolling. - Use regmap_read_poll_timeout() instead of hand rolling. * mma7660 - Drop ACPI_PTR() use that is unhelpful. * mpu3050 - Stop exporting symbols not used outside of module - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace. * ping - Typo fix * qcom-spmi-rradc - Typo fix * sc27xx - Convert to generic struct u32_fract * srf08 - Drop a redundant check on !val * st_lsm6dsx - Limit the requested watermark to the hwfifo size. * stm32-adc - Use generic_handle_domain_irq() instead of opencoding. - Fix handling of ADC disable. * stm32-dac - Use str_enabled_disable() instead of open coding. * stx104 - Switch to iomap rather than direct use of ioports * tsc2046 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * tsl2563 - Replace flush_scheduled_work() with cancel_delayed_work_sync() - Replace cancel_delayed_work() with cancel_delayed_work_sync() * vl53l0x - Make the VDD regulator optional by allowing a dummy regulator. * tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits) iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt() iio: adc: xilinx-xadc: Make use of device properties iio: light: cm32181: Add PM support iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: stm32-adc: disable adc before calibration iio: adc: stm32-adc: make safe adc disable iio: dac: ad5380: align '*' each line and drop unneeded blank line iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency" iio: Don't use bare "unsigned" dt-bindings: iio: dac: mcp4922: expand for mcp4921 support iio: dac: mcp4922: add support to mcp4921 iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace iio: adc: stm32-adc: Use generic_handle_domain_irq() proximity: vl53l0x: Make VDD regulator actually optional MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address iio: gyro: bmg160: Fix typo in comment ...
2022-07-14mfd: lpc_ich: Add support for pinctrl in non-ACPI systemTan Jui Nee1-1/+104
Add support for non-ACPI systems, such as system that uses Advanced Boot Loader (ABL) whereby a platform device has to be created in order to bind with pin control and GPIO. At the moment, Intel Apollo Lake In-Vehicle Infotainment (IVI) system requires a driver to hide and unhide P2SB to lookup P2SB BAR and pass the PCI BAR address to GPIO. Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com> Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-14mfd: lpc_ich: Switch to generic p2sb_bar()Andy Shevchenko2-19/+9
Instead of open coding p2sb_bar() functionality we are going to use generic library. There is one more user en route. This is more than just a clean-up. It also fixes a potential issue seen when SPI BAR is 64-bit. The current code works if and only if the PCI BAR of the hidden device is inside 4G address space. In case when firmware decides to go above 4G, we will get a wrong address. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-14mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()Andy Shevchenko1-17/+14
Factor out duplicate code to lpc_ich_enable_spi_write() helper function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org>
2022-07-04mfd: bcm2835-pm: Add support for BCM2711Stefan Wahren1-0/+13
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present with the ISP and H264 bits, and V3D is in the same place in the new ASB as the old one. As per the devicetree bindings, BCM2711 will provide both the old and new ASB resources, so get both of them and pass them into 'bcm2835-power,' which will take care of selecting which one to use accordingly. Since the RPiVid ASB's resources were being provided prior to formalizing the bindings[1], also support the old DT files that didn't use 'reg-names.' [1] See: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-8-stefan.wahren@i2se.com
2022-07-04mfd: bcm2835-pm: Use 'reg-names' to get resourcesNicolas Saenz Julienne1-20/+41
If available in firmware, find resources by their 'reg-names' position instead of relying on hardcoded offsets. Care is taken to support old firmware nonetheless. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220625113619.15944-7-stefan.wahren@i2se.com
2022-06-27mfd: core: Use acpi_dev_for_each_child()Rafael J. Wysocki1-7/+24
Instead of walking the list of children of an ACPI device directly, use acpi_dev_for_each_child() to carry out an action for all of the given ACPI device's children. This will help to eliminate the children list head from struct acpi_device as it is redundant and it is used in questionable ways in some places (in particular, locking is needed for walking the list pointed to it safely, but it is often missing). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/2726954.BEx9A2HvPv@kreacher
2022-06-18mfd: qcom-spmi-pmic: read fab id on supported PMICsCaleb Connolly1-0/+7
The PMI8998 and PM660 expose the fab_id, this is needed by drivers like the RRADC to calibrate ADC values. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18mfd: qcom-spmi-pmic: expose the PMIC revid information to clientsCaleb Connolly1-90/+175
Some PMIC functions such as the RRADC need to be aware of the PMIC chip revision information to implement errata or otherwise adjust behaviour, export the PMIC information to enable this. This is specifically required to enable the RRADC to adjust coefficients based on which chip fab the PMIC was produced in, this can vary per unique device and therefore has to be read at runtime. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULEThomas Gleixner5-45/+5
Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed as is without any warranty of any kind whether expressed or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license version 2 for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner2-18/+2
(part 2) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-08mfd: intel-m10-bmc: Rename n3000bmc-secure driverRuss Weight1-1/+1
The n3000bmc-secure driver has changed to n3000bmc-sec-update. Update the name in the list of the intel-m10-bmc sub-drivers. Tested-by: Tianfei Zhang <tianfei.zhang@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220606160038.846236-2-russell.h.weight@intel.com Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2022-06-08platform/chrome: cros_ec_proto: Rename cros_ec_command functionPrashant Malani1-2/+2
cros_ec_command() is the name of a function as well as a struct, as such it can confuse indexing tools (like ctags). Avoid this by renaming it to cros_ec_cmd(). Update all the callsites to use the new name. This patch is a find-and-replace, so should not introduce any functional changes. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Prashant Malani <pmalani@chromium.org> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20220606201825.763788-3-pmalani@chromium.org
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds1-36/+94
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-05-23mfd: rt4831: Improve error reporting for problems during .remove()Uwe Kleine-König1-1/+6
Returning an error value in an i2c remove callback results in a generic error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. So instead of triggering the generic i2c error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220502191012.53259-1-u.kleine-koenig@pengutronix.de
2022-05-23mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()Yang Yingliang1-4/+2
It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: b5e29aa880be ("mfd: davinci_voicecodec: Remove pointless #include") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220426030857.3539336-1-yangyingliang@huawei.com
2022-05-23mfd: intel-lpss: Add support for ADL-P i2c6 and i2c7Gaggery Tsai1-0/+2
Added 8086:51d8 and 8086:51d9 to the intel_lpss_pci driver. They are Intel Alder Lake-P i2c controllers. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220520193537.26090-1-gaggery.tsai@intel.com
2022-05-07ARM/pxa/mfd/power/sound: Switch Tosa to GPIO descriptorsLinus Walleij1-36/+94
The Tosa device (Sharp SL-6000) has a mishmash driver set-up for the Toshiba TC6393xb MFD that includes a battery charger and touchscreen and has some kind of relationship to the SoC sound driver for the AC97 codec. Other devices define a chip like this but seem only half-implemented, not really handling battery charging etc. This patch switches the Toshiba MFD device to provide GPIO descriptors to the battery charger and SoC codec. As a result some descriptors need to be moved out of the Tosa boardfile and new one added: all SoC GPIO resources to these drivers now comes from the main boardfile, while the MFD provide GPIOs for its portions. As a result we can request one GPIO from our own GPIO chip and drop two hairy callbacks into the board file. This platform badly needs to have its drivers split up and converted to device tree probing to handle this quite complex relationship in an orderly manner. I just do my best in solving the GPIO descriptor part of the puzzle. Please don't ask me to fix everything that is wrong with these driver to todays standards, I am just trying to fix one aspect. I do try to use modern devres resource management and handle deferred probe using new functions where appropriate. Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Dirk Opfer <dirk@opfer-online.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Reviewed-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-28mfd: twl4030: Make twl4030_exit_irq() return voidUwe Kleine-König3-11/+4
If twl4030_exit_irq() returns an error, the effect is that the caller (twl_remove()) forwards the error to the i2c core without unregistering its dummy slave devices. This only makes the i2c core emit another error message and then it still removes the device. In this situation it doesn't make sense to abort the remove cleanup and not unregister the slave devices. So do that. Then return value is actually unused and twl4030_exit_irq() can better be changed to return no value at all. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220113101430.12869-3-u.kleine-koenig@pengutronix.de
Powered by cgit, Gruvboxed by Blaster4385.