aboutsummaryrefslogtreecommitdiff
path: root/drivers/message
AgeCommit message (Collapse)AuthorFilesLines
2008-10-31Merge branch 'master' of ↵David S. Miller1-6/+6
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/p54/p54common.c
2008-10-30i2o: fix kernel-doc warningsRandy Dunlap1-6/+6
Fixup i2o kernel-doc warnings: Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:579): No description found for parameter 'bdev' Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:579): No description found for parameter 'mode' Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:608): No description found for parameter 'disk' Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:608): No description found for parameter 'mode' Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:657): No description found for parameter 'bdev' Warning(linux-next-20081022//drivers/message/i2o/i2o_block.c:657): No description found for parameter 'mode' Signed-off-by: Randy Dunlap <[email protected]> Cc: Al Viro <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-10-27net: convert more to %pMJohannes Berg1-11/+7
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-2/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits) [SCSI] sd: fix computation of the full size of the device [SCSI] lib: string_get_size(): don't hang on zero; no decimals on exact [SCSI] sun3x_esp: Convert && to || [SCSI] sd: remove command-size switching code [SCSI] 3w-9xxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] 3w-xxxx: remove unnecessary local_irq_save/restore for scsi sg copy API [SCSI] fix netlink kernel-doc [SCSI] sd: Fix handling of NO_SENSE check condition [SCSI] export busy state via q->lld_busy_fn() [SCSI] refactor sdev/starget/shost busy checking [SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver. [SCSI] aic7xxx: Take the LED out of diagnostic mode on PM resume [SCSI] aic79xx: user visible misuse wrong SI units (not disk size!) [SCSI] ipr: use memory_read_from_buffer() [SCSI] aic79xx: fix shadowed variables [SCSI] aic79xx: fix shadowed variables, add statics [SCSI] aic7xxx: update *_shipped files [SCSI] aic7xxx: update .reg files [SCSI] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser [SCSI] scsi_dh: Initialize path state to be passive when path is not owned ...
2008-10-23[SCSI] mptfusion: Increase scsi-timeouts, similariy to the LSI 4.x driver.Bernd Schubert1-2/+1
Make SPI timeout 10s the same as SAS Signed-off-by: Bernd Schubert <[email protected]> Acked-by: "Prakash, Sathya" <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-10-21[PATCH] switch i2oAl Viro1-9/+8
Signed-off-by: Al Viro <[email protected]>
2008-10-21[PATCH] beginning of methods conversionAl Viro1-3/+3
To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <[email protected]>
2008-10-16i2o: Fix 32/64bit DMA lockingAlan Cox7-31/+339
The I2O ioctls assume 32bits. In itself that is fine as they are old cards and nobody uses 64bit. However on LKML it was noted this assumption is also made for allocated memory and is unsafe on 64bit systems. Fixing this is a mess. It turns out there is tons of crap buried in a header file that does racy 32/64bit filtering on the masks. So we: - Verify all callers of the racy code can sleep (i2o_dma_[re]alloc) - Move the code into a new i2o/memory.c file - Remove the gfp_mask argument so nobody can try and misuse the function - Wrap a mutex around the problem area (a single mutex is easy to do and none of this is performance relevant) - Switch the remaining problem kmalloc holdout to use i2o_dma_alloc Cc: Markus Lidel <[email protected]> Cc: Vasily Averin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds6-60/+60
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (59 commits) [SCSI] replace __FUNCTION__ with __func__ [SCSI] extend the last_sector_bug flag to cover more sectors [SCSI] qla2xxx: Update version number to 8.02.01-k6. [SCSI] qla2xxx: Additional NPIV corrections. [SCSI] qla2xxx: suppress uninitialized-var warning [SCSI] qla2xxx: use memory_read_from_buffer() [SCSI] qla2xxx: Issue proper ISP callbacks during stop-firmware. [SCSI] ch: fix ch_remove oops [SCSI] 3w-9xxx: add MSI support and misc fixes [SCSI] scsi_lib: use blk_rq_tagged in scsi_request_fn [SCSI] ibmvfc: Update driver version to 1.0.1 [SCSI] ibmvfc: Add ADISC support [SCSI] ibmvfc: Miscellaneous fixes [SCSI] ibmvfc: Fix hang on module removal [SCSI] ibmvfc: Target refcounting fixes [SCSI] ibmvfc: Reduce unnecessary log noise [SCSI] sym53c8xx: free luntbl in sym_hcb_free [SCSI] scsi_scan.c: Release mutex in error handling code [SCSI] scsi_eh_prep_cmnd should save scmd->underflow [SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field ...
2008-07-27[SCSI] replace __FUNCTION__ with __func__Harvey Harrison6-60/+60
[jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: Harvey Harrison <[email protected]> Cc: SCSI List <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-07-26Documentation cleanup: trivial misspelling, punctuation, and grammar ↵Matt LaPlante1-3/+3
corrections. Cc: Randy Dunlap <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-07-24I2O: handle sysfs_create_link() failuresWang Chen1-12/+42
Compile warning: ignoring return value of `sysfs_create_link', declared with attribute warn_unused_result. If sysfs_create_link failed, take care of the return value and do some error handle after the failure. Since sysfs_remove_link() will check whether a link exists, when removing the link in error path, we don't need to care whether a link was created. Signed-off-by: Wang Chen <[email protected]> Cc: Markus Lidel <[email protected]> Cc: Jens Axboe <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-07-21driver core: remove KOBJ_NAME_LEN defineKay Sievers3-5/+6
Kobjects do not have a limit in name size since a while, so stop pretending that they do. Signed-off-by: Kay Sievers <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2008-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds15-22/+115
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits) [SCSI] scsi_dh: fix kconfig related build errors [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h [SCSI] make struct scsi_{host,target}_type static [SCSI] fix locking in host use of blk_plug_device() [SCSI] zfcp: Cleanup external header file [SCSI] zfcp: Cleanup code in zfcp_erp.c [SCSI] zfcp: zfcp_fsf cleanup. [SCSI] zfcp: consolidate sysfs things into one file. [SCSI] zfcp: Cleanup of code in zfcp_aux.c [SCSI] zfcp: Cleanup of code in zfcp_scsi.c [SCSI] zfcp: Move status accessors from zfcp to SCSI include file. [SCSI] zfcp: Small QDIO cleanups [SCSI] zfcp: Adapter reopen for large number of unsolicited status [SCSI] zfcp: Fix error checking for ELS ADISC requests [SCSI] zfcp: wait until adapter is finished with ERP during auto-port [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver [SCSI] sg: Add target reset support [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC [SCSI] sd: Move scsi_disk() accessor function to sd.h ...
2008-07-14Merge commit 'v2.6.26' into bkl-removalJonathan Corbet5-17/+15
2008-07-12[SCSI] mpt fusion : Adding FAULT Reset polling workPrakash, Sathya2-0/+94
When the firmware is in Fault state it will be identifed only when the next time the driver access the IOC state. This patch includes a polling function in the driver which will be executed in regular interval to check the status of the firmware and if it is in Fault state, then the firmware will be reset by the driver. Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-07-12[SCSI] mpt fusion : Setting intial period to 0xFF instead of 0xAPrakash, Sathya1-0/+1
The initial period is set to 0xFF Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-07-12[SCSI] fusion: default MSI to disabled for SPI and FC controllersJames Bottomley1-3/+8
There's a fault on the FC controllers that makes them not respond correctly to MSI. The SPI controllers are fine, but are likely to be onboard on older motherboards which don't handle MSI correctly, so default both these cases to disabled. Enable by setting the module parameter mpt_msi_enable=1. For the SAS case, enable MSI by default, but it can be disabled by setting the module parameter mpt_msi_enable=0. Cc: "Prakash, Sathya" <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-07-08[SCSI] mptspi: fix oops in mptspi_dv_renegotiate_work()James Bottomley1-2/+7
The problem here is that if the ioc faults too early in the bring up sequence (as it usually does for an irq routing problem), ioc_reset gets called before the scsi host is even allocated. This causes an oops when it later schedules a renegotiation. Fix this by checking ioc->sh before trying to renegotiate. Cc: "Moore, Eric" <[email protected]> Cc: Stable Tree <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-07-02i2o: fasync BKL pushdownJonathan Corbet1-4/+6
This driver appears to really need the BKL to protect open_files. Signed-off-by: Jonathan Corbet <[email protected]>
2008-07-02mpt: fasync BKL pushdownJonathan Corbet1-1/+5
It looks like this driver really needs the BKL here. Signed-off-by: Jonathan Corbet <[email protected]>
2008-06-20message-i2o-i2o_config: BKL pushdownArnd Bergmann1-0/+2
Signed-off-by: Arnd Bergmann <[email protected]>
2008-06-05[SCSI] mpt fusion : Updated copyright statment with 2008 includedPrakash, Sathya15-17/+17
Updating copyright statement to include the year 2008 Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-06-05[SCSI] mpt fusion: Driver version upgrade to 3.04.07Prakash, Sathya1-2/+2
Updating driver version to 3.04.07 from 3.04.06 Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-06-05[SCSI] mpt fusion: make struct mpt_proc_root_dir staticAdrian Bunk2-3/+1
This patch makes the needlessly global struct mpt_proc_root_dir static. Signed-off-by: Adrian Bunk <[email protected]> Acked-by: "Prakash, Sathya" <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-05-27[SCSI] fusion mpt: fix target missing after resetting external raidMichael Reed3-12/+0
Following a hard reset of a SAS raid, one of the raid targets is occasionally missing. I tracked this down to a pretty obscure little bug. The LSI fusion drivers for SAS and Fibre Channel both use their respective transport layers. Those transport layers increment the target number assigned to new targets. The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host structure to avoid scanning the scsi host adapter. Both fusion drivers set "this_id" from a value returned in a firmware PortFacts response. For my particular test case (SAS) the firmware id assigned to the initiator was 173. After enough raid resets to cause the raid targets to go and come a sufficient number of times, the id assigned by the transport to a raid target would match the id assigned by the host adapter to the "this_id" field, resulting in that target not being scanned. Fix by not assigning this_id and not checking it in slave_configure. Signed-off-by: Michael Reed <[email protected]> Acked-by: "Moore, Eric" <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-04-29Remove duplicated unlikely() in IS_ERR()Hirofumi Nakagawa1-1/+1
Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless code. Signed-off-by: Hirofumi Nakagawa <[email protected]> Acked-by: David S. Miller <[email protected]> Acked-by: Jeff Garzik <[email protected]> Cc: Paul Clements <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: David Brownell <[email protected]> Cc: James Bottomley <[email protected]> Cc: Michael Halcrow <[email protected]> Cc: Anton Altaparmakov <[email protected]> Cc: Al Viro <[email protected]> Cc: Carsten Otte <[email protected]> Cc: Patrick McHardy <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Acked-by: Mike Frysinger <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-04-29drivers: use non-racy method for proc entries creation (2)Denis V. Lunev1-4/+2
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Alexey Dobriyan <[email protected]> Cc: "Eric W. Biederman" <[email protected]> Cc: Peter Osterlund <[email protected]> Cc: Bartlomiej Zolnierkiewicz <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Neil Brown <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Alessandro Zummo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones2-55/+69
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <[email protected]> Signed-off-by: Kay Sievers <[email protected]> Cc: Roland Dreier <[email protected]> Cc: Sean Hefty <[email protected]> Cc: Hal Rosenstock <[email protected]> Cc: James Bottomley <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2008-04-07[SCSI] mpt fusion: fix up msi_enable in mpt_suspendJames Bottomley1-1/+1
There's a problem with the combination of the upstream power management fixes and the enabling of MSI by default in that the suspend path still uses the global variable. Convert it to check ioc->msi_enable. Cc: "Moore, Eric" <[email protected]> Cc: "Prakash, Sathya" <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-04-07[SCSI] mptsas: do not use ioc->handle to locate hba portinfo structureMichael Reed2-6/+17
While performing hardware raid reset testing via the raid's client, I noticed that sometimes, following the reset, that there would be more raid targets in the lsscsi output than there actually were raid targets. I tracked this down to the following issue. Fusion cannot always find the mptsas_portinfo structure for the hba because it uses the handle stored in ioc->handle to locate it. The problem is that the firmware can change the handle associated with the hba when h/w raid is reset (via the raid client). When this happens, the driver will allocate another mptsas_portinfo structure and link it into the chain of said structures. This ultimately causes confusion within the driver resulting in targets not being removed when they should be. Eric Moore pointed out that the hba's portinfo structure is always the first structure on the sas_topology list. This patch modifies mptsas.c to access the hba's portinfo structure by taking the first structure on said list. Signed-off-by: Michael Reed <[email protected]> Acked-by: "Moore, Eric" <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-04-07[SCSI] mpt fusion: convert inactive_list_mutex to a mutexMatthias Kaehlcke3-10/+11
the semaphore inactive_list_mutex is used as a mutex, convert it to the mutex API Signed-off-by: Matthias Kaehlcke <[email protected]> Acked-by: "Moore, Eric" <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-04-07[SCSI] mpt fusion: Enable MSI by default for SAS controllersPrakash, Sathya2-5/+13
This patch modifies the driver to enable MSI by default for all SAS chips. Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-03-18[SCSI] mpt fusion: Power Management fixes for MPT SAS PCI-E controllersPrakash, Sathya2-121/+166
The system power state changes like hibernation and standby are not happening properly with 106XE controllers, this patch modifies the driver to free resources and allocate resources in power management entry points [jejb: compile fixes for upstream] Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-03-05[SCSI] mpt fusion: don't oops if NumPhys==0Krzysztof Oledzki1-0/+5
Don't oops if NumPhys==0, instead return -ENODEV. This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=9909 Signed-off-by: Krzysztof Piotr Oledzki <[email protected]> Acked-by: Eric Moore <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-03-03[SCSI] docbook: fix fusion source filesRandy Dunlap2-21/+18
Fix docbook problems in fusion source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap <[email protected]> Acked-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-02-22[SCSI] mptbase: fix use-after-free'sAdrian Bunk1-2/+2
ioc->name is used in the printk's after ioc has been freed. Free after prinks to fix this. This patch fixes two use-after-free's introduced by commit e78d5b8f1e73ab82f3fd041d05824cfee7d83a2c and spotted by the Coverity checker. Signed-off-by: Adrian Bunk <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-02-18[SCSI] mpt fusion: kill warnings in mptbase.h on parisc64Kyle McMartin1-1/+1
Verified all the arches necessary select the CONFIG_64BIT symbol. This also kills the warning (since it was using the 32-bit case) on parisc64 and mips64. Signed-off-by: Kyle McMartin <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-02-11[SCSI] mpt fusion: Request I/O resources only when requiredPrakash, Sathya2-7/+44
This patch modifies the I/O resource allocation behavior of FUSION driver. The current version of driver allocates the I/O resources even if they are not required and this creates trouble in low resource environments. This driver now uses pci_enable_device_mem/pci_enable_device functions to differentiate the resource allocations. Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-02-11[SCSI] mpt fusion: Avoid racing when mptsas and mptcl module are loaded in ↵Prakash, Sathya1-1/+3
parallel This patch sets the IOC pointer in drvrdata of pcidev before adding the IOC into the list of IOCs. Without this patch the driver oops when the mptsas and mptctl modules are loaded in parallel. Signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-02-03drivers/message/: Spelling fixesJoe Perches3-6/+6
Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Adrian Bunk <[email protected]>
2008-02-03Spelling fixes: lenght->lengthPaulius Zaleckas1-1/+1
Signed-off-by: Paulius Zaleckas <[email protected]> Signed-off-by: Adrian Bunk <[email protected]>
2008-01-28blk_end_request: changing i2o_block (take 4)Kiyoshi Ueda1-12/+8
This patch converts i2o_block to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interface of internal function, i2o_block_end_request(), is changed. Cc: Markus Lidel <[email protected]> Signed-off-by: Kiyoshi Ueda <[email protected]> Signed-off-by: Jun'ichi Nomura <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2008-01-23[SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZEFUJITA Tomonori2-2/+2
This replaces sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE in several LLDs. It's a preparation for the future changes to remove sense_buffer array in scsi_cmnd structure. Signed-off-by: FUJITA Tomonori <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-01-23[SCSI] mpt fusion: Fix for module unload problem in flash less controller ↵Prakash, Sathya2-43/+53
environment This patch fixes the module unload problem in flash less 1030 controller environment where firmware download boot functionality is invoked. The problem is due to the firmware download is being done in the reverse order, which this patch solves by insureing the download occurs to the last controller being reset. signed-off-by: Sathya Prakash <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2008-01-11[SCSI] mpt fusion: make mptsas_smp_handler update residFUJITA Tomonori1-0/+2
This patch fixes mptsas_smp_handler to update both din_resid or dout_resid on success. bsg can report back the residual. Signed-off-by: FUJITA Tomonori <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2007-11-05i2o: debug messages correctedVasily Averin1-2/+2
max_phys_segments and max_sectors were swapped Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2007-10-24SG: audit of drivers that use blk_rq_map_sg()Jens Axboe1-0/+1
They need to properly init the sg table, or blk_rq_map_sg() will complain if CONFIG_DEBUG_SG is set. Signed-off-by: Jens Axboe <[email protected]>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt6-13/+13
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <[email protected]> Signed-off-by: Adrian Bunk <[email protected]>
2007-10-17I2O: Fix "defined but not used" build warningsSatyam Sharma1-47/+47
drivers/message/i2o/exec-osm.c:539: warning: `i2o_exec_lct_notify' defined but not used comes when CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=n, because its only callsite is #ifdef'ed as such. So let's #ifdef the function definition also. Also move the definition to before the callsite, to get rid of forward prototype. [[email protected]: fix warnings] Signed-off-by: Satyam Sharma <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.