aboutsummaryrefslogtreecommitdiff
path: root/drivers/message/fusion/mptspi.c
AgeCommit message (Collapse)AuthorFilesLines
2007-02-02[SCSI] fusion - move SPI API over to mptspi.cEric Moore1-1/+267
Move some functions that only apply to the mptspi module over from mptscsih.c Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2007-02-02[SCSI] fusion - Greater than 255 target and lun supportEric Moore1-61/+127
Add support for greater than 255 target and luns. Kill the hd->Target[] field, and change all references of bus_id/target_id, to channel/id. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2007-01-06[SCSI] fusion: MODULE_VERSION supportEric Moore1-1/+2
* Add modinfo driver version support. * Change copyright year to 2007. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2006-12-07[PATCH] kernel-doc: fix fusion and i2o docsRandy Dunlap1-3/+1
Correct lots of typos, kernel-doc warnings, & kernel-doc usage in fusion and i2o drivers. Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2006-11-22WorkStruct: make allyesconfigDavid Howells1-6/+8
Fix up for make allyesconfig. Signed-Off-By: David Howells <[email protected]>
2006-07-13[SCSI] mptfusion: misc fix'sEric Moore1-8/+2
* removing obsolete 1066, 1066E from Kconfig * initializing aen_event_read_flag after host reset * remove oem references * remove obsolete mpt_pq_filter command line option Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2006-06-28[SCSI] mptsas: Adding 1078 ROC supportEric Moore1-2/+2
* Adding 1078 ROC (Raid On Chip) Support - New host adapter * Moving all PCI Vendor/Device ids to using internal defines; a request from Christoph/James B. some time ago for when the next chip was added. * Removing SAS 1066/1066E Vendor/Device IDs, as there are no plans to manufacture that controller. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2006-06-09[FUSION]: Fix mptspi.c build with CONFIG_PM not set.Tom "spot" Callaway1-0/+2
Signed-off-by: Tom "spot" Callaway <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2006-05-03[SCSI] mptspi: revalidate negotiation parameters after host reset and resumeEric Moore1-2/+66
This is a bug fix for mptspi driver, where after a host reset or resume, we revalidate the negotiation parameters for all devices. This bug was introduced when the driver was ported to use the spi transport layer. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2006-03-14[SCSI] fusion - removing target_id/bus_id from the VirtDevice structureMoore, Eric1-2/+2
It makes no sense in keeping the target_id and bus_id in the VirtDevice structure, when it can be obtained from the VirtTarget structure. In addition, this patch fix's couple compilation bugs in mptfc.c when MPT_DEBUG_FC is enabled. This provided by Micheal Reed. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2006-03-14[SCSI] fusion - move some debug firmware event debug msgs to verbose levelMoore, Eric1-1/+1
Created a debug level MPT_DEBUG_VERBOSE_EVENTS. Moving some of the more vebose debug messages for firwmare events into new debug level. Also added some more firmware events descriptions. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2006-03-01[SCSI] mptspi: Add transport class Domain ValidationJames Bottomley1-53/+680
This is the first half of a patch to add the generic domain validation to mptspi. It also creates a secondary "virtual" channel for raid component devices since these are now exported with no_uld_attach. What Eric and I would have really liked is to export all physical components on channel 0 and all raid components on channel 1. Unfortunately, this would result in device renumbering on platforms with mixed RAID/Physical devices which was considered unacceptable for userland stability reasons. Still to be done is to plug back the extra parameter setting and DV pieces on reset and hotplug. Signed-off-by: James Bottomley <[email protected]>
2006-01-31[SCSI] fusion: spi bus reset when driver loadsMoore, Eric1-1/+9
This patch is for spi. This issues bus reset when driver loads. Handling cases when initator has negotiated for packetized, and target negotiated for non-packetized; effectly this bus reset is getting both target and initiator on the same sheet of music. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2006-01-14[SCSI] fusion: kzalloc / kcalloc conversionChristoph Hellwig1-18/+8
Convert kmalloc + memset to kzalloc or kcalloc in fusion. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2005-12-13[SCSI] mptfusion - mapping fixs required support for transport layers.Moore, Eric Dean1-2/+4
This utilizes the hostdata area that is hung off of scsi_target and scsi_device for saving unique firmware mapping. This will be required for supporting new Fibre and SPI transport support. This also fixs problems in error handling error code for SAS controllers, in which the incorrect mapping was passed to the firmware. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2005-12-13[SCSI] mptfusion - cleaning up xxx_probe error handlingMoore, Eric Dean1-7/+10
This cleans the returning failure conditions of the mptsas/mptfc/mptspi probe routines. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2005-12-13[SCSI] mptfusion - adding = THIS_MODULEMoore, Eric Dean1-0/+1
Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2005-09-19[SCSI] fusion SAS support (mptsas driver) updatesMoore, Eric Dean1-1/+1
Summary of Changes: * splitting mpt_interrupt per Christophs suggestion about a month ago * rename ScsiCfgData to SpiCfgData structure, then move all the raid related info into new structure called RaidCfgData. This is done because SAS supports RAID, as well as SPI, so the raid stuff should be seperate. * incorrect timeout calculation for cntdn inside WaitForDoorbellAck and WaitForDoortbellInt * add support for interpreting SAS Log Info * Increase Event Log Size from 0xA to 0x32 * Fix bug in mptsas/mptfc/mptspi - when controller has Initiator Mode Disabled, and only running in TargetMode, the mptctl would panic when loading. The fix is to return 0, instead of -ENODEV, in SCSI LLD respective probe routines * Fix bug in mptlan.c - driver will panic if there is host reset, due to dev being set to zero in mpt_lan_ioc_reset * Fix's for SPI - Echo Buffer * Several fix's in mptscsih_io_done - FCP Response info, RESIDUAL_MISMATCH, Data Underrun, etc. * Cleanup Error Handling - EH handlers, mptscsih_flush_cmds, and zeroing out ScsiLookup from mptscsih_qcmd * Cleanup asyn event handling from mptscsih -> mptscsih_event_process. Also added support for SAS Persistent Table Full, an asyn event Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2005-09-04[SCSI] fusion: whitespace fixesChristoph Hellwig1-3/+3
Acked by: Moore, Eric Dean <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2005-07-26Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds1-18/+1
2005-07-01[SCSI] - mptfusion - convert to new change_queue_depth APIMoore, Eric Dean1-14/+1
Convert driver to use new change_queue_depth API. Signed-off-by: Eric Moore <[email protected]> Fixed up rejections and Signed-off-by: James Bottomley <[email protected]>
2005-06-27[PATCH] PCI: make drivers use the pci shutdown callback instead of the ↵Greg Kroah-Hartman1-3/+1
driver core callback. Now we can change the pci core to always set this pointer, as pci drivers should use it, not the driver core callback. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2005-06-26[SCSI] remove scsi_set_deviceChristoph Hellwig1-4/+0
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: James Bottomley <[email protected]>
2005-05-20[SCSI] mptfusion: fix panic loading driver statically compiledMoore, Eric Dean1-4/+3
Adjust link ordering in the Makefile. Also, the ioc->DoneCtx handles for mptspi/mptfc in the message frame. And I'm now not seeing the panic. Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2005-05-20[SCSI] mptfusion: mptspi Adding Stub Driver - SCSI ParallelMoore, Eric Dean1-0/+487
(1) mptspi.c: This driver is having module_init, module_exit, and probe. (2) mptspi.c: Registering for SCSI pci ids are done from this module. (3) mptspi.c: Convert MODULE_PARM to module_param Signed-off-by: Eric Moore <[email protected]> Signed-off-by: James Bottomley <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.