aboutsummaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2014-12-04[media] tda18271: Fix identationMauro Carvalho Chehab1-1/+1
As reported by smatch: drivers/media/tuners/tda18271-common.c:176 tda18271_read_extended() warn: if statement not indented Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] stv090x: remove export symbol for stv090x_set_gpio()Mauro Carvalho Chehab3-16/+14
Drivers that use dvb_attach can have just one exported symbol, or they will cause compilation breakages depending on the selected frontends. As Jim reported: drivers/built-in.o: In function `technisat_usb2_set_voltage': technisat-usb2.c:(.text+0x3b4919): undefined reference to `stv090x_set_gpio' make: *** [vmlinux] Error 1 That happens because, on his configuration, the configuration is: CONFIG_DVB_USB=y CONFIG_DVB_STV090x=m Luis proposed ar way to fix, but that would just force the STV090x to be selected, even if one wants to use a device with a different frontend. Instead, let's do the right thing: move set_gpio to the configuration structure and fill it during dvb_attach(). This way, the driver can still call it, and dvb_attach() will load stv090x module only if the device really needs it. Reported by: Jim Davis <[email protected]> Cc: Luis Rodriguez <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] dvb-usb-dvbsky: add TechnoTrend CT2-4400 and CT2-4650 devices supportNibble Max1-0/+8
Signed-off-by: Nibble Max <[email protected]> Reviewed-by: Olli Salonen <[email protected]> Tested-by: Olli Salonen <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] cxusb: remove TechnoTrend CT2-4400 and CT2-4650 devicesNibble Max3-303/+0
Remove TechnoTrend CT2-4400 and CT2-4650 devices from cxusb. They are supported by dvb-usb-dvbsky driver in PATCH 3/3. Signed-off-by: Nibble Max <[email protected]> Reviewed-by: Olli Salonen <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] dvb-usb-dvbsky: add T330 dvb-t2/t/c usb stick supportNibble Max1-0/+88
DVBSky T330 dvb-t2/t/c usb stick: 1>dvb frontend: SI2157A30(tuner), SI2168B40(demod) 2>usb controller: CY7C68013A Signed-off-by: Nibble Max <[email protected]> Reviewed-by: Olli Salonen <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] media: exynos-gsc: fix build warningMauro Carvalho Chehab1-6/+9
Fixes following build warnings: gsc-core.c:350:17: warning: 'low_plane' may be used uninitialized gsc-core.c:371:31: warning: 'high_plane' may be used uninitialized Reported-by: Prabhakar Lad <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Lad, Prabhakar <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] rtl2832_sdr: control ADCAntti Palosaari1-0/+8
Recent rtl28xxu patch I made moved demod ADC enable from power control to frontend control (due to slave demod support). Because of that we need call USB interface frontend control too in order to enable ADC. Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] v4l: vb2: Fix race condition in _vb2_fop_releaseLaurent Pinchart1-4/+4
The function releases the queue if the file being released is the queue owner. The check reads the queue->owner field without taking the queue lock, creating a race condition with functions that set the queue owner, such as vb2_ioctl_reqbufs() for instance. Fix this by moving the queue->owner check within the mutex protected section. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Hans Verkuil <[email protected]> Acked-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] v4l: vb2: Fix race condition in vb2_fop_pollLaurent Pinchart1-19/+8
The vb2_fop_poll() implementation tries to be clever on whether it needs to lock the queue mutex by checking whether polling might start fileio. The test requires reading the q->num_buffer field, which is racy if we don't hold the queue mutex in the first place. Remove the extra cleverness and just lock the mutex. Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] smiapp: Support V4L2_SEL_TGT_NATIVE_SIZESakari Ailus1-0/+6
Add support for selection target V4L2_SEL_TGT_NATIVE_SIZE. It is equivalent of what V4L2_SEL_TGT_CROP_BOUNDS used to be. Support for V4L2_SEL_TGT_CROP_BOUNDS is still supported by the driver as a compatibility interface. Signed-off-by: Sakari Ailus <[email protected]> Acked-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-04[media] smiapp: Set left and top to zero for crop bounds selectionSakari Ailus1-0/+1
The fields were previously uninitialised, leaving the returned values to where the user had set them. This was never the intention. Signed-off-by: Sakari Ailus <[email protected]> Acked-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] omap_vout: fix compile warningsHans Verkuil1-4/+4
When compiling under COMPILE_TEST on a x86_64 the following warnings appear: drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_uservirt_to_phys': drivers/media/platform/omap/omap_vout.c:209:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] return virt_to_phys((void *) virtp); ^ drivers/media/platform/omap/omap_vout.c: In function 'omapvid_setup_overlay': drivers/media/platform/omap/omap_vout.c:420:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, ^ drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_buffer_prepare': drivers/media/platform/omap/omap_vout.c:794:34: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] vout->queued_buf_addr[vb->i] = (u8 *) ^ In file included from arch/x86/include/asm/dma-mapping.h:44:0, from include/linux/dma-mapping.h:82, from drivers/media/platform/omap/omap_vout.c:40: drivers/media/platform/omap/omap_vout.c:803:58: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr, ^ include/asm-generic/dma-mapping-common.h:174:60: note: in definition of macro 'dma_map_single' #define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL) ^ These are fixed by this patch. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] media: davinci: vpif_capture: use vb2_ops_wait_prepare/finish helperPrabhakar Lad1-0/+2
This patch adds support in the capture driver for using vb2_ops_wait_prepare/finish() helpers provided by the vb2 core. Signed-off-by: Lad, Prabhakar <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] media: blackfin: use vb2_ops_wait_prepare/finish helperPrabhakar Lad1-14/+3
This patch drops driver specific wait_prepare() and wait_finish() callbacks from vb2_ops and instead uses the the helpers vb2_ops_wait_prepare/finish() provided by the vb2 core, the lock member of the queue needs to be initalized to a mutex so that vb2 helpers vb2_ops_wait_prepare/finish() can make use of it. Signed-off-by: Lad, Prabhakar <[email protected]> Acked-by: Scott Jiang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] media: marvell-ccic: use vb2_ops_wait_prepare/finish helperPrabhakar Lad1-24/+5
This patch drops driver specific wait_prepare() and wait_finish() callbacks from vb2_ops and instead uses the the helpers vb2_ops_wait_prepare/finish() provided by the vb2 core, the lock member of the queue needs to be initalized to a mutex so that vb2 helpers vb2_ops_wait_prepare/finish() can make use of it. Signed-off-by: Lad, Prabhakar <[email protected]> Cc: Jonathan Corbet <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] V4L2: Deletion of an unnecessary check before the function call ↵Markus Elfring1-2/+1
"vb2_put_vma" The vb2_put_vma() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Acked-by: Marek Szyprowski <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] media/platform: fix querycapHans Verkuil6-26/+10
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. In addition, remove the CAPTURE and OUTPUT caps for M2M devices. These were already slated for removal, so it's time to do so. Signed-off-by: Hans Verkuil <[email protected]> Acked-by: Kamil Debski <[email protected]> Acked-by: Lad, Prabhakar <[email protected]> Acked-by: Jacek Anaszewski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] media/platform: fix querycapHans Verkuil8-19/+16
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by: Hans Verkuil <[email protected]> Cc: Scott Jiang <[email protected]> Cc: Gerhard Sittig <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] media/radio: fix querycapHans Verkuil2-2/+6
Querycap should set the device_caps field. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] media/usb,pci: fix querycapHans Verkuil3-6/+5
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] cx18: add device_caps supportHans Verkuil4-4/+16
This was missing in this driver, so add this functionality. Signed-off-by: Hans Verkuil <[email protected]> Cc: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] adv7511: improve colorspace handlingHans Verkuil1-0/+208
Add support for YCbCr output and support setting colorspace, YCbCr encoding and quantization for the AVI InfoFrame. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] vivid: add support for YCbCr encoding and quantizationHans Verkuil5-19/+116
Implement controls to set the YCbCr encoding and the quantization range for the colorspace. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] vivid: add new colorspacesHans Verkuil3-18/+36
Add AdobeRGB and BT.2020 support. The colorspace control now orders the colorspaces according to how often they are used. So rarely used colorspaces are moved to the end. This makes it more logical when testing colorspace support. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] vivid-tpg: improve colorspace supportHans Verkuil2-107/+258
Add support for the new AdobeRGB and BT.2020 colorspaces. Also support explicit Y'CbCr and quantization settings. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-02[media] vivid-tpg-colors: add AdobeRGB and BT.2020 supportHans Verkuil2-43/+665
This extends the precalculated tpg_csc_colors matrix with AdobeRGB and BT.2020 colorspace support. It also adds two precalculated tables that convert between linear RGB and non-linear Rec.709 R'G'B' values, i.e. the Rec. 709 transfer function. This is needed to efficiently handle the BT.2020 Constant Luminance Yc'CbcCrc encoding and decoding. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-12-01[media] v4l2-ioctl.c: log the new ycbcr_enc and quantization fieldsHans Verkuil1-4/+7
Log the new ycbcr_enc and quantization fields. Note that it now also logs the flags field for the multiplanar buffer type. This was forgotten when the flags field was added. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-26[media] media: rc: add driver for Amlogic Meson IR remote receiverBeniamino Galvani3-0/+228
Amlogic Meson SoCs include a infrared remote control receiver that can operate in two modes: "NEC" mode in which the hardware decodes frames using the NEC IR protocol, and "general" mode in which the receiver simply reports the duration of pulses and spaces for software decoding. This is a driver for the IR receiver that implements software decoding of received frames. Signed-off-by: Beniamino Galvani <[email protected]> Acked-by: Carlo Caione <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-26[media] omap: disable COMPILE_TESTMauro Carvalho Chehab1-1/+1
This causes lots of errors, because of sub-arch specific dependencies: All error/warnings: >> ERROR: "omapdss_compat_init" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_overlay_manager" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_num_overlay_managers" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_overlay" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omapdss_is_initialized" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dispc_register_isr" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omapdss_get_version" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_put_device" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_next_device" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dispc_unregister_isr" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omapdss_compat_uninit" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_device" [drivers/media/platform/omap/omap-vout.ko] undefined! >> ERROR: "omap_dss_get_num_overlays" [drivers/media/platform/omap/omap-vout.ko] undefined! Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25Revert "[media] lmed04: add missing breaks"Mauro Carvalho Chehab1-10/+14
According with Malcolm, the missing breaks are intentional. So, let's revert commit d442b15fb4deb2b5d516e2dae1f569b1d5472399, add some comments to document it and fix the two smatch warnings: drivers/media/usb/dvb-usb-v2/lmedm04.c:828 lme_firmware_switch() warn: missing break? reassigning 'st->dvb_usb_lme2510_firmware' drivers/media/usb/dvb-usb-v2/lmedm04.c:850 lme_firmware_switch() warn: missing break? reassigning 'st->dvb_usb_lme2510_firmware' using a different strategy to avoid reassign values to st->dvb_usb_lme2510_firmware. Acked-by: Malcolm Priestley <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] siano: unnecessary check before rc_unregister_device()Markus Elfring1-2/+1
The rc_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] omap: Fix typo "HAS_MMU"Paul Bolle1-1/+2
Commit 38a073116525 ("[media] omap: be sure that MMU is there for COMPILE_TEST") added a dependency on HAS_MMU. There's no Kconfig symbol HAS_MMU. Use MMU instead. Signed-off-by: Paul Bolle <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] media/au0828: Fix IR stop, poll to not access device during disconnectShuah Khan2-2/+17
au0828 IR stop and poll routines continue to access device while usb disconnect is in progress. There is small window between device disconnect and usb interface is set to null. This results in filling the log with several of the following error messages. Fix it to detect device disconnect condition and avoid device access. Nov 20 18:58:02 anduin kernel: [ 102.949819] au0828: au0828_usb_disconnect() Nov 20 18:58:02 anduin kernel: [ 102.950046] au0828: send_control_msg() Failed sending control message, error -71. Nov 20 18:58:02 anduin kernel: [ 102.950052] au0828: send_control_msg() Failed sending control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950056] au0828: send_control_msg() Failed sending control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950061] au0828: send_control_msg() Failed sending control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950065] au0828: recv_control_msg() Failed receiving control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950069] au0828: recv_control_msg() Failed receiving control message, error -19. Nov 20 18:58:02 anduin kernel: [ 102.950072] au0828: recv_control_msg() Failed receiving control message, error -19. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] USB: Deletion of unnecessary checks before three function callsMarkus Elfring4-7/+4
GIT_AUTHOR_DATE=1416486805 The functions pvr2_hdw_destroy(), rc_unregister_device() and vfree() perform also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] platform: Deletion of unnecessary checks before two function callsMarkus Elfring2-6/+3
The functions i2c_put_adapter() and release_firmware() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] rc: Deletion of unnecessary checks before two function callsMarkus Elfring2-4/+2
The functions input_free_device() and rc_close() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] i2c: Deletion of an unnecessary check before the function call ↵Markus Elfring1-2/+1
"rc_unregister_device" The rc_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] firewire: Deletion of an unnecessary check before the function call ↵Markus Elfring1-2/+1
"dvb_unregister_device" The dvb_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Reviewed-by: Stefan Richter <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] exynos4-is: fix error handling of irq_of_parse_and_mapDmitry Torokhov1-2/+2
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] smipcie: add DVBSky T9580 V3 supportNibble Max2-0/+70
v2: - Update Kconfig file. DVBSky T9580 V3 card is the dual tuner card, which supports S/S2 and T2/T/C. 1>DVB-S/S2 frontend: M88DS3103/M88TS2022 2>DVB-T2/T/C frontend: SI2168B40/SI2157A30 2>PCIe bridge: SMI PCIe Signed-off-by: Nibble Max <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] smipcie: use add_i2c_client and del_i2c_client functionsNibble Max1-29/+40
v2: -no change, just resend with other patches. "add_i2c_client" and "del_i2c_client" functions make code shorter and easy to maintain. Signed-off-by: Nibble Max <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] dvb-usb-dvbsky: add T680CI dvb-t2/t/c usb ci box supportNibble Max2-0/+124
DVBSky T680CI dvb-t2/t/c usb ci box: 1>dvb frontend: SI2158A20(tuner), SI2168A30(demod) 2>usb controller: CY7C86013A 3>ci controller: CIMAX SP2 or its clone. Signed-off-by: Nibble Max <[email protected]> Reviewed-by: Olli Salonen <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] si2168: One function call less in si2168_init() after error detectionMarkus Elfring1-4/+5
GIT_AUTHOR_DATE=1416472767 The release_firmware() function was called in some cases by the si2168_init() function during error handling even if the passed variable contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] m88ds3103: One function call less in m88ds3103_init() after error ↵Markus Elfring1-5/+6
detection GIT_AUTHOR_DATE=1416472158 The release_firmware() function was called in some cases by the m88ds3103_init() function during error handling even if the passed variable contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] DVB-frontends: Deletion of unnecessary checks before the function ↵Markus Elfring4-8/+4
call "release_firmware" GIT_AUTHOR_DATE=1416472432 The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] lmed04: add missing breaksMauro Carvalho Chehab1-0/+2
drivers/media/usb/dvb-usb-v2/lmedm04.c:828 lme_firmware_switch() warn: missing break? reassigning 'st->dvb_usb_lme2510_firmware' drivers/media/usb/dvb-usb-v2/lmedm04.c:849 lme_firmware_switch() warn: missing break? reassigning 'st->dvb_usb_lme2510_firmware' Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] cxusb: Geniatech T230 supportCrazyCat2-0/+128
Geniatech Mygica T230 DVB-T/T2/C USB stick support. Signed-off-by: Evgeny Plehov <[email protected]> Reviewed-by: Olli Salonen <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] si2168: TS clock inversion controlCrazyCat3-2/+10
TS clock polarity control implemented. [Antti: Resolved simple conflict] Signed-off-by: Evgeny Plehov <[email protected]> Reviewed-by: Olli Salonen <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] si2157: Si2148 supportCrazyCat3-6/+8
Si2148-A20 silicon tuner support. [Antti: Resolved conflict] Signed-off-by: Evgeny Plehov <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2014-11-25[media] si2157: make checkpatch.pl happy (remove break after goto)Olli Salonen1-1/+0
Break after goto is unnecessary. Signed-off-by: Olli Salonen <[email protected]> Signed-off-by: Antti Palosaari <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.