| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB core changes to avoid refcount troubles and UAF
- DVB API/core has gained support for DVB-C2 and DVB-S2X
- New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c
- Removal of an unused sensor driver: s5k4ecgx
- Move microchip_csi2dc to a new directory, named after the
manufacturer
- Add media controller support to Microship drivers
- Old Atmel/Microship drivers that don't use media controler got moved
to staging
- New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support
- Allwinner A31 camera sensor driver code was now split into a bridge
and a separate processor driver
- Added a virtual stateless decoder driver in order to test core
support for stateless drivers and test userspace apps using it
- removed platform-based support for ov9650, as this is not used
anymore
- atomisp now uses videobuf2 and supports normal mmap mode
- the imx7-media-csi driver got promoted from staging
- rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)
- most i2c drivers now use I2C .probe_new() kAPI
- lots of drivers fixes, cleanups and improvements
* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce the swiotlb buffer size on allocation failure (Alexey
Kardashevskiy)
- clean up passing of bogus GFP flags to the dma-coherent allocator
(Christoph Hellwig)
* tag 'dma-mapping-6.2-2022-12-13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject __GFP_COMP in dma_alloc_attrs
ALSA: memalloc: don't pass bogus GFP_ flags to dma_alloc_*
s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent
cnic: don't pass bogus GFP_ flags to dma_alloc_coherent
RDMA/qib: don't pass bogus GFP_ flags to dma_alloc_coherent
RDMA/hfi1: don't pass bogus GFP_ flags to dma_alloc_coherent
media: videobuf-dma-contig: use dma_mmap_coherent
swiotlb: reduce the swiotlb buffer size on allocation failure
|
|
Some devices support sampling of the parallel data at both edges of the
interface pixel clock in order to reduce the pixel clock by two.
Add a mediabus flag that represents this feature.
Signed-off-by: Michael Riesch <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
add contiguous nv12 tiled format nv12_8l128 and nv12_10be_8l128
Signed-off-by: Ming Qian <[email protected]>
Reviewed-by: Nicolas Dufresne <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The CLEAR_AFTER_FIELD defined here is functionally the same as
memset_after() helper, so replace it with memset_after() to simplify the
code, no functional change in this patch.
Signed-off-by: Xiu Jianfeng <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Despite being big, the changes here are trivial: they just change the
probing method for I2C. So, apply it as a merge.
Tag branch
* tag 'br-v6.2g' of git://linuxtv.org/hverkuil/media_tree: (96 commits)
media: v4l2-core/tuner-core: Convert to i2c's .probe_new()
media: usb: go7007: s2250-board: Convert to i2c's .probe_new()
media: tuners/tua9001: Convert to i2c's .probe_new()
media: tuners/tda18250: Convert to i2c's .probe_new()
media: tuners/tda18212: Convert to i2c's .probe_new()
media: tuners/qm1d1c0042: Convert to i2c's .probe_new()
media: tuners/qm1d1b0004: Convert to i2c's .probe_new()
media: tuners/mxl301rf: Convert to i2c's .probe_new()
media: tuners/mt2060: Convert to i2c's .probe_new()
media: tuners/m88rs6000t: Convert to i2c's .probe_new()
media: tuners/fc2580: Convert to i2c's .probe_new()
media: tuners/e4000: Convert to i2c's .probe_new()
media: vidtv: Convert to i2c's .probe_new()
media: radio/tef6862: Convert to i2c's .probe_new()
media: radio/saa7706h: Convert to i2c's .probe_new()
media: radio/radio-tea5764: Convert to i2c's .probe_new()
media: i2c/wm8775: Convert to i2c's .probe_new()
media: i2c/wm8739: Convert to i2c's .probe_new()
media: i2c/vs6624: Convert to i2c's .probe_new()
media: i2c/vpx3220: Convert to i2c's .probe_new()
...
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Replace custom implementation of the device_match_fwnode().
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Sanity checks were added to verify the v4l2_bt_timings blanking fields
in order to avoid integer overflows when userspace passes weird values.
But that assumed that userspace would correctly fill in the front porch,
backporch and sync values, but sometimes all you know is the total
blanking, which is then assigned to just one of these fields.
And that can fail with these checks.
So instead set a maximum for the total horizontal and vertical
blanking and check that each field remains below that.
That is still sufficient to avoid integer overflows, but it also
allows for more flexibility in how userspace fills in these fields.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: 4b6d66a45ed3 ("media: v4l2-dv-timings: add sanity checks for blanking values")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[hverkuil: deleted kerneldoc reference to removed id argument]
|
|
dma_alloc_coherent does not return a physical address, but a DMA address,
which might be remapped or have an offset. Passing the DMA address to
vm_iomap_memory is thus broken.
Use the proper dma_mmap_coherent helper instead, and stop passing
__GFP_COMP to dma_alloc_coherent, as the memory management inside the
DMA allocator is hidden from the callers and does not require it.
With this the gfp_t argument to __videobuf_dc_alloc can be removed and
hard coded to GFP_KERNEL.
Fixes: a8f3c203e19b ("[media] videobuf-dma-contig: add cache support")
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Tag branch
* tag 'br-v6.2d' of git://linuxtv.org/hverkuil/media_tree: (35 commits)
media: saa7164: remove variable cnt
atomisp: fix potential NULL pointer dereferences
radio-terratec: Remove variable p
media: platform: s5p-mfc: Fix spelling mistake "mmaping" -> "mmapping"
media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config
media: vivid: remove redundant assignment to variable checksum
media: cedrus: h264: Optimize mv col buffer allocation
media: cedrus: h265: Associate mv col buffers with buffer
media: mediatek: vcodec: fix h264 cavlc bitstream fail
media: cedrus: hevc: Fix offset adjustments
media: imx-jpeg: Fix Coverity issue in probe
media: v4l2-ioctl.c: Unify YCbCr/YUV terms in format descriptions
media: atomisp: Fix spelling mistake "mis-match" -> "mismatch"
media: c8sectpfe: Add missed header(s)
media: adv748x: afe: Select input port when initializing AFE
media: vimc: Update device configuration in the documentation
media: adv748x: Remove dead function declaration
media: mxl5005s: Make array RegAddr static const
media: atomisp: Fix spelling mistake "modee" -> "mode"
media: meson/vdec: always init coef_node_start
...
|
|
Tag branch
* tag 'br-v6.2e' of git://linuxtv.org/hverkuil/media_tree: (29 commits)
media: davinci/vpbe: Fix a typo ("defualt_mode")
media: sun6i-csi: Remove unnecessary print function dev_err()
media: Documentation: Drop deprecated bytesused == 0
media: platform: exynos4-is: fix return value check in fimc_md_probe()
media: dvb-core: remove variable n, turn for-loop to while-loop
media: vivid: fix compose size exceed boundary
media: rkisp1: make const arrays ae_wnd_num and hist_wnd_num static
media: dvb-core: Fix UAF due to refcount races at releasing
media: rkvdec: Add required padding
media: aspeed: Extend debug message
media: aspeed: Support aspeed mode to reduce compressed data
media: Documentation: aspeed-video: Add user documentation for the aspeed-video driver
media: v4l2-ctrls: Reserve controls for ASPEED
media: v4l: Add definition for the Aspeed JPEG format
staging: media: tegra-video: fix device_node use after free
staging: media: tegra-video: fix chan->mipi value on error
media: cedrus: initialize controls a bit later
media: cedrus: prefer untiled capture format
media: cedrus: Remove cedrus_codec enum
media: cedrus: set codec ops immediately
...
|
|
* git://linuxtv.org/sailus/media_tree: (47 commits)
media: i2c: ov4689: code cleanup
media: ov9650: Drop platform data code path
media: ov7670: Drop unused include
media: ov2640: Drop legacy includes
media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
media: dt-bindings: add bindings for Toshiba TC358746
phy: dphy: add support to calculate the timing based on hs_clk_rate
phy: dphy: refactor get_default_config
v4l: subdev: Warn if disabling streaming failed, return success
dw9768: Enable low-power probe on ACPI
media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
media: i2c: imx290: Add crop selection targets support
media: i2c: imx290: Factor out format retrieval to separate function
media: i2c: imx290: Move registers with fixed value to init array
media: i2c: imx290: Create controls for fwnode properties
media: i2c: imx290: Implement HBLANK and VBLANK controls
media: i2c: imx290: Split control initialization to separate function
media: i2c: imx290: Fix max gain value
media: i2c: imx290: Add exposure time control
media: i2c: imx290: Define more register macros
...
|
|
This introduces support for the Aspeed JPEG format, where the new frame
can refer to previous frame to reduce the amount of compressed data.
The concept is similar to I/P frame of video compression. It will
compare the new frame with previous one to decide which macroblock's
data is changed, and only the changed macroblocks will be compressed.
This Aspeed JPEG format is used by the video engine on Aspeed platforms,
which is generally adapted for remote KVM.
Signed-off-by: Jammy Huang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Complain in the newly added s_stream video op wrapper if disabling
streaming failed. Also return zero in this case as there's nothing the
caller can do to return the error.
This way drivers also won't need to bother with printing error messages.
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
|
|
Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided
blanking values are reasonable.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module)
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the
sensor, and its documentation.
Menu items are not standardized as they differ for each sensors.
Signed-off-by: Benjamin Mugnier <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
|
|
Format descriptions use YCbCr and YUV terms interchangeably. Let's unify
them so they all use YUV. While YCbCr is actually correct term here, YUV
is shorter and thus it also fixes too long description of P010 tiled
format.
Fixes: 3c8e19d3d3f9 ("media: Add P010 tiled format")
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The V4L2 API defines the maximum value for an integer menu control as
the number of elements minus one. The v4l2_ctrl_new_std_menu() validates
this constraint with an off-by-one error. Fix it.
Fixes: d1e9b7c12b74 ("[media] V4L: Add support for integer menu controls with standard menu items")
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.
Nothing major in here, lots of little things with new devices
supported and updates for a few drivers. Highlights include:
- thunderbolt/USB4 devices supported a bit better than before, and
some new ids to enable new hardware devices
- USB gadget uvc updates for newer video formats and better v4l
integration (the v4l portions were acked by those maintainers)
- typec updates for tiny issues and more typec drivers for new chips.
- xhci tiny updates for minor issues
- big usb-serial ftdi_sio driver update to handle new devices better
- lots of tiny dwc3 fixes and updates for the IP block that is
showing up everywhere these days
- dts updates for new devices being supported
- other tiny janitorial and cleanups fixes for lots of different USB
drivers. Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: gadget: uvc: don't put item still in use
usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
usb: host: ehci-exynos: switch to using gpiod API
Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
dt-bindings: usb: Convert FOTG210 to dt schema
usb: mtu3: fix failed runtime suspend in host only mode
USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
usb: typec: Replace custom implementation of device_match_fwnode()
usb: typec: ucsi: Don't warn on probe deferral
usb: add quirks for Lenovo OneLink+ Dock
MAINTAINERS: switch dwc3 to Thinh
usb: idmouse: fix an uninit-value in idmouse_open
USB: PHY: JZ4770: Switch to use dev_err_probe() helper
usb: phy: generic: Switch to use dev_err_probe() helper
usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
usb: cdns3: remove dead code
usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
usb: musb: sunxi: Switch to use dev_err_probe() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Mediatek MDP V3
- New driver for NXP i.MX DW100 dewarper
- Zoran driver got promoted from staging
- Hantro and related drivers got promoted from staging
- Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu,
meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci,
zr364xx)
- Usual set of driver fixes, improvements and cleanups
* tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits)
media: destage Hantro VPU driver
media: platform: mtk-mdp3: add MediaTek MDP3 driver
media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
media: dt-binding: mediatek: add bindings for MediaTek MDP3 components
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
media: xilinx: video: Add 1X12 greyscale format
media: xilinx: csi2rxss: Add 1X12 greyscale format
media: staging: media: imx: imx7-media-csi: Increase video mem limit
media: uvcvideo: Limit power line control for Sonix Technology
media: uvcvideo: Use entity get_cur in uvc_ctrl_set
media: uvcvideo: Fix typo 'the the' in comment
media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()
media: uvcvideo: Fix memory leak in uvc_gpio_parse
media: renesas: vsp1: Add support for RZ/G2L VSPD
media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit
media: renesas: vsp1: Add support for VSP software version
media: renesas: vsp1: Add support to deassert/assert reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
media: amphion: fix a bug that vpu core may not resume after suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
|
|
* fixes:
media: rkvdec: Disable H.264 error detection
media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
media: dvb_vb2: fix possible out of bound access
media: v4l2-ioctl.c: fix incorrect error path
media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
media: uvcvideo: Fix InterfaceProtocol for Quanta camera
|
|
If allocating array_buf fails, or copying data from userspace into that
buffer fails, then just free memory and return the error. Don't attempt
to call video_put_user() since there is no point, and it would copy back
data on error even if INFO_FL_ALWAYS_COPY wasn't set.
So if writing the array back to userspace fails, then don't go to
out_array_args, instead just continue with the regular code that just
returns the error unless 'always_copy' is set.
Update the VIDIOC_G/S/TRY_EXT_CTRLS ioctls to set the ALWAYS_COPY flag
since they now need it. Before this worked due to this buggy code, but
now that that is fixed these ioctls need to set this flag explicitly.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The v4l2_compat_get_array_args() function can leave uninitialized memory in the
buffer it is passed. So zero it before copying array elements from userspace
into the buffer.
Signed-off-by: Hans Verkuil <[email protected]>
Reported-by: [email protected]
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Now that the pipeline is stored into pads instead of entities, we can
change the relevant functions to take pads instead of entities.
Signed-off-by: Tomi Valkeinen <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add new variant of media_pipeline_start(), media_pipeline_alloc_start().
media_pipeline_alloc_start() can be used by drivers that do not need to
extend the media_pipeline. The function will either use the pipeline
already associated with the entity, if such exists, or allocate a new
pipeline.
When media_pipeline_stop() is called and the pipeline's use count drops
to zero, the pipeline is automatically freed.
Signed-off-by: Tomi Valkeinen <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
With the upcoming stream related improvements to the pipelines, the
pipelines are moved from media entities to media pads. As the drivers
currently use the pipelines with the entity based model, moving the
pipelines to pads will cause changes to the drivers.
However, most of the uses of media pipelines are related to a video
device (a DMA engine) with a single pad, and thus there's never a need
to support multiple pads in these use cases. We can avoid pushing the
complexities of the pad based model to the drivers by adding video
device wrappers for the pipeline related functions.
This patch adds a number of wrappers to media_pipeline functions, all of
which take a video_device as a parameter (instead of a media_entity),
and verify that there's just one pad.
Signed-off-by: Tomi Valkeinen <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The type ops for equal, init and validate have an elems argument,
but this can be taken from struct v4l2_ctrl: ctrl->elems for
equal and init, and ctrl->new_elems for validate (since you are
validating a new control value).
So drop this argument and update all callers.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The functions uvc_simplify_fraction and uvc_fraction_to_interval are
generic helpers which are also useful for other v4l2 drivers. This patch
moves them to v4l2-common.
Tested-by: Daniel Scally <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Signed-off-by: Michael Grzeschik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It is confusing to refer to vb2 structures with 'videobuf', since
that typically is used to refer to the old videobuf version 1
framework.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The double `the' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Replace 'the the' with 'the' in the comment.
[hverkuil: the the -> that the]
Signed-off-by: Slark Xiao <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Export the callback functions of the default v4l2 control type operations
such as a driver defining its own operations could reuse some of them.
Signed-off-by: Xavier Roumegue <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Initializing arrays and validating or checking for equality of arrays
is suboptimal since it does this per element.
Change the ops to operate on the whole payload to speed up array
operations.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add a new V4L2_EVENT_CTRL_CH_DIMENSIONS change flag that is issued
when the dimensions of an array change as a result of a
__v4l2_ctrl_modify_dimensions() call.
This will inform userspace that there are new dimensions.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add a new function to modify the dimensions of an array control.
This is typically used if the array size depends on e.g. the currently
selected video format.
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Also allocate space for arrays in struct ctrl_ref.
This is in preparation for allowing to change the array size from
a driver.
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Just like dynamic arrays, also allocate space for regular arrays.
This is in preparation for allowing to change the array size from
a driver.
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <[email protected]>
Reviewed-by: Jeremy Kerr <[email protected]>
Reviewed-by: Benjamin Mugnier <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Crt Mori <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Marek Behún <[email protected]> # for leds-turris-omnia
Acked-by: Andy Shevchenko <[email protected]>
Reviewed-by: Petr Machata <[email protected]> # for mlxsw
Reviewed-by: Maximilian Luz <[email protected]> # for surface3_power
Acked-by: Srinivas Pandruvada <[email protected]> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <[email protected]> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <[email protected]> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <[email protected]> # for versaclock5
Reviewed-by: Ajay Gupta <[email protected]> # for ucsi_ccg
Acked-by: Jonathan Cameron <[email protected]> # for iio
Acked-by: Peter Rosin <[email protected]> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <[email protected]> # for lontium-lt8912b
Reviewed-by: Jean Delvare <[email protected]> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <[email protected]> # for IPMI
Reviewed-by: Vladimir Oltean <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: Sebastian Reichel <[email protected]> # for drivers/power
Acked-by: Krzysztof Hałasa <[email protected]>
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Drivers typically extend the v4l2_async_subdev structure by embedding it
in a driver-specific structure, to store per-subdev custom data. The
v4l2_async_subdev instances are freed by the v4l2-async framework, which
makes this mechanism cumbersome to use safely when custom data needs
special treatment to be destroyed (such as freeing additional memory, or
releasing references to kernel objects).
To ease this, add a .destroy() operation to the
v4l2_async_notifier_operations structure. The operation is called right
before the v4l2_async_subdev is freed, giving drivers a chance to
destroy data if needed.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Hans Verkuil <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add P010 tiled format
[rebased, updated pixel format name and added description]
Tested-by: Benjamin Gaignard <[email protected]>
Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Fix padding where needed to remove holes
Signed-off-by: Benjamin Gaignard <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Simply print the type of the control.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The number of 'entry point offset' can be very variable.
Instead of using a large static array define a v4l2 dynamic array
of U32 (V4L2_CTRL_TYPE_U32).
The number of entry point offsets is reported by the elems field
and in struct v4l2_ctrl_hevc_slice_params.num_entry_point_offsets
field.
Signed-off-by: Benjamin Gaignard <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
array
Make explicit that V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control is
a dynamic array control type.
Some drivers may be able to receive multiple slices in one control
to improve decoding performance.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Change HEVC stateless controls names to V4L2_CID_STATELESS_HEVC instead
of V4L2_CID_MPEG_VIDEO_HEVC be coherent with v4l2 naming convention.
Signed-off-by: Benjamin Gaignard <[email protected]>
Reviewed-by: Nicolas Dufresne <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Implement support for dynamically allocated arrays.
Most of the changes concern keeping track of the number of elements
of the array and the number of elements allocated for the array and
reallocating memory if needed.
Acked-by: Benjamin Gaignard <[email protected]>
Acked-by: Nicolas Dufresne <[email protected]>
Tested-by: Benjamin Gaignard <[email protected]>
Tested-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The VIDEO_V4L2_SUBDEV_API Kconfig symbol is mostly selected
automatically, with a a handful of drivers still using it as a
dependency. Fix them to use selection, and drop the symbol title text to
not expose it for manual selection.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|