aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/v4l2-core/v4l2-subdev.c
AgeCommit message (Collapse)AuthorFilesLines
2023-02-03media: v4l2-core: Make the v4l2-core code enable/disable the privacy LED if ↵Hans de Goede1-0/+46
present Make v4l2_async_register_subdev_sensor() try to get a privacy LED associated with the sensor and extend the call_s_stream() wrapper to enable/disable the privacy LED if found. This makes the core handle privacy LED control, rather then having to duplicate this code in all the sensor drivers. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20230127203729.10205-2-hdegoede@redhat.com
2023-01-22media: v4l2-subdev: Add v4l2_subdev_s_stream_helper() functionLaurent Pinchart1-0/+40
The v4l2_subdev_s_stream_helper() helper can be used by subdevs that implement the stream-aware .enable_streams() and .disable_streams() operations to implement .s_stream(). This is limited to subdevs that have a single source pad. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: v4l2-subdev: Add subdev .(enable|disable)_streams() operationsLaurent Pinchart1-0/+224
Add two new subdev pad operations, .enable_streams() and .disable_streams(), to allow control of individual streams per pad. This is a superset of what the video .s_stream() operation implements. To help with handling of backward compatibility, add two wrapper functions around those operations, and require their usage in drivers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: v4l2-subdev: Add v4l2_subdev_state_xlate_streams() helperLaurent Pinchart1-0/+26
Add a helper function to translate streams between two pads of a subdev, using the subdev's internal routing table. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: add v4l2_subdev_routing_validate() helperLaurent Pinchart1-0/+102
Add a v4l2_subdev_routing_validate() helper for verifying routing for common cases like only allowing non-overlapping 1-to-1 streams. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: add v4l2_subdev_set_routing_with_fmt() helperTomi Valkeinen1-0/+22
v4l2_subdev_set_routing_with_fmt() is the same as v4l2_subdev_set_routing(), but additionally initializes all the streams with the given format. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: add streams to v4l2_subdev_get_fmt() helper functionTomi Valkeinen1-3/+7
Add streams support to v4l2_subdev_get_fmt() helper function. Subdev drivers that do not need to do anything special in their get_fmt op can use this helper directly for v4l2_subdev_pad_ops.get_fmt. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: add "opposite" stream helper funcsTomi Valkeinen1-0/+49
Add two helper functions to make dealing with streams easier: v4l2_subdev_routing_find_opposite_end - given a routing table and a pad + stream, return the pad + stream on the opposite side of the subdev. v4l2_subdev_state_get_opposite_stream_format - return a pointer to the format on the pad + stream on the opposite side from the given pad + stream. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: use streams in v4l2_subdev_link_validate()Tomi Valkeinen1-20/+165
Update v4l2_subdev_link_validate() to use routing and streams for validation. Instead of just looking at the format on the pad on both ends of the link, the routing tables are used to collect all the streams going from the source to the sink over the link, and the streams' formats on both ends of the link are verified. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: add stream based configurationTomi Valkeinen1-7/+143
Add support to manage configurations (format, crop, compose) per stream, instead of per pad. This is accomplished with data structures that hold an array of all subdev's stream configurations. The number of streams can vary at runtime based on routing. Every time the routing is changed, the stream configurations need to be re-initialized. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: Add for_each_active_route() macroJacopo Mondi1-0/+20
Add a for_each_active_route() macro to replace the repeated pattern of iterating on the active routes of a routing table. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: add v4l2_subdev_set_routing helper()Tomi Valkeinen1-0/+31
Add a helper function to set the subdev routing. The helper can be used from subdev driver's set_routing op to store the routing table. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: add v4l2_subdev_has_pad_interdep()Tomi Valkeinen1-0/+31
Add a v4l2_subdev_has_pad_interdep() helper function which can be used for media_entity_operations.has_pad_interdep op. It considers two pads interdependent if there is an active route between pad0 and pad1. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: Require code change to enable [GS]_ROUTINGTomi Valkeinen1-0/+15
The Streams API is an experimental feature. To use the Streams API, the user needs to change a variable in v4l2-subdev.c and recompile the kernel. This commit should be reverted when the Streams API is deemed ready for production use. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: subdev: Add [GS]_ROUTING subdev ioctls and operationsLaurent Pinchart1-0/+84
Add support for subdev internal routing. A route is defined as a single stream from a sink pad to a source pad. The userspace can configure the routing via two new ioctls, VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING, and subdevs can implement the functionality with v4l2_subdev_pad_ops.set_routing(). - Add sink and source streams for multiplexed links - Copy the argument back in case of an error. This is needed to let the caller know the number of routes. - Expand and refine documentation. - Make the 'routes' pointer a __u64 __user pointer so that a compat32 version of the ioctl is not required. - Add struct v4l2_subdev_krouting to be used for subdevice operations. - Fix typecasing warnings - Check sink & source pad types - Add 'which' field - Routing to subdev state - Dropped get_routing subdev op Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: add V4L2_SUBDEV_CAP_STREAMSTomi Valkeinen1-1/+4
Add a subdev capability flag to expose to userspace if a subdev supports multiplexed streams. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: v4l2-subdev: Sort includesTomi Valkeinen1-4/+4
Sort the includes alphabetically. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: subdev: Replace custom implementation of device_match_fwnode()Andy Shevchenko1-1/+1
Replace custom implementation of the device_match_fwnode(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-27v4l: subdev: Warn if disabling streaming failed, return successSakari Ailus1-0/+15
Complain in the newly added s_stream video op wrapper if disabling streaming failed. Also return zero in this case as there's nothing the caller can do to return the error. This way drivers also won't need to bother with printing error messages. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2022-05-13media: v4l2-subdev.c: kvmalloc_array -> kvcallocHans Verkuil1-3/+2
Fixes smatch warning: drivers/media/v4l2-core/v4l2-subdev.c:978 __v4l2_subdev_state_alloc() warn: Please consider using kvcalloc instead Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: subdev: add v4l2_subdev_get_fmt() helper functionTomi Valkeinen1-0/+22
Add v4l2_subdev_get_fmt() helper function which implements v4l2_subdev_pad_ops.get_fmt using active state. Subdev drivers that support active state and do not need to do anything special in their get_fmt op can use this helper directly for v4l2_subdev_pad_ops.get_fmt. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: subdev: add locking wrappers to subdev op wrappersTomi Valkeinen1-7/+48
It is common that media drivers call subdev ops in source subdevs, and pass NULL as the state. This was the way to indicate that the callee should use the callee's private active state. E.g.: v4l2_subdev_call(priv->source_sd, pad, get_fmt, NULL, &sd_fmt); Now that we have a real subdev active state in the v4l2_subdev struct, we want the caller to pass a proper state (when available). And furthermore, the state should be locked. This would mean changing all the callers, which is the long term goal. To fix this issue in the short term, let's add an extra wrapper layer to all v4l2_subdev_call_pad_wrappers which deal with states. These wrappers handle the state == NULL case by using the locked active state instead (when available). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: subdev: add subdev state lockingTomi Valkeinen1-17/+46
The V4L2 subdevs have managed without centralized locking for the state (previously pad_config), as the try-state is supposedly safe (although I believe two TRY ioctls for the same fd would race), and the active-state, and its locking, is managed by the drivers internally. We now have active-state in a centralized position, and need locking. Strictly speaking the locking is only needed for new drivers that use the new state, as the current drivers continue behaving as they used to. However, active-state locking is complicated by the fact that currently the real active-state of a subdev is split into multiple parts: the new v4l2_subdev_state, subdev control state, and subdev's internal state. In the future all these three states should be combined into one state (the v4l2_subdev_state), and then a single lock for the state should be sufficient. But to solve the current split-state situation we need to share locks between the three states. This is accomplished by using the same lock management as the control handler does: we use a pointer to a mutex, allowing the driver to override the default mutex. Thus the driver can do e.g.: sd->state_lock = sd->ctrl_handler->lock; before calling v4l2_subdev_init_finalize(), resulting in sharing the same lock between the states and the controls. The locking model for active-state is such that any subdev op that gets the state as a parameter expects the state to be already locked by the caller, and expects the caller to release the lock. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: subdev: pass also the active state to subdevs from ioctlsTomi Valkeinen1-10/+54
At the moment when a subdev op is called, the TRY subdev state (subdev_fh->state) is passed as a parameter even for the ACTIVE case, or alternatively a NULL can be passed for ACTIVE case. This used to make sense, as the ACTIVE state was handled internally by the subdev drivers. We now have a state for the ACTIVE case in a standard place, and can pass that also to the drivers. This patch changes the subdev ioctls to either pass the TRY or ACTIVE state to the subdev. Unfortunately many drivers call ops from other subdevs, and implicitly pass NULL as the state, so this is just a partial solution. A coccinelle spatch could perhaps be created which fixes the drivers' subdev calls. For all current upstream drivers this doesn't matter, as they do not expect to get a valid state for ACTIVE case. But future drivers which support multiplexed streaming and routing will depend on getting a state for both active and try cases. For new drivers we can mandate that the pipelines where the drivers are used need to pass the state properly, or preferably, not call such subdev ops at all. However, if an existing subdev driver is changed to support multiplexed streams, the driver has to consider cases where its ops will be called with NULL state. The problem can easily be solved by using the v4l2_subdev_lock_and_get_active_state() helper, introduced in a follow up patch. Another follow up patch adds wrappers for pad ops dealing with subdev state, which automate the use of v4l2_subdev_lock_and_get_active_state() for cases where the state is NULL. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: subdev: add active state to struct v4l2_subdevTomi Valkeinen1-0/+21
Add a new 'active_state' field to struct v4l2_subdev to which we can store the active state of a subdev. This will place the subdev configuration into a known place, allowing us to use the state directly from the v4l2 framework, thus simplifying the drivers. Also add functions v4l2_subdev_init_finalize() and v4l2_subdev_cleanup(), which will allocate and free the active state. The functions are named in a generic way so that they can be also used for other subdev initialization work. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: subdev: rename subdev-state alloc & freeTomi Valkeinen1-6/+6
v4l2_subdev_alloc_state() and v4l2_subdev_free_state() are not supposed to be used by the drivers. However, we do have a few drivers that use those at the moment, so we need to expose these functions for the time being. Prefix the functions with __ to mark the functions as internal. At the same time, rename them to v4l2_subdev_state_alloc and v4l2_subdev_state_free to match the style used for other functions like video_device_alloc() and media_request_alloc(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: v4l2-subdev: drop extra #ifdefTomi Valkeinen1-2/+1
subdev_open() is inside #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API, which depends on CONFIG_MEDIA_CONTROLLER, so there's no need for an extra Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: v4l2-subdev: Drop .set_mbus_config() operationLaurent Pinchart1-8/+0
The .set_mbus_config() operation is deprecated, and nothing in the kernel uses it. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-06-17media: subdev: remove VIDIOC_DQEVENT_TIME32 handlingArnd Bergmann1-24/+0
Converting the VIDIOC_DQEVENT_TIME32/VIDIOC_DQEVENT32/ VIDIOC_DQEVENT32_TIME32 arguments to the canonical form is done in common code, but for some reason I ended up adding another conversion helper to subdev_do_ioctl() as well. I must have concluded that this does not go through the common conversion, but it has done that since the ioctl handler was first added. I assume this one is harmless as there should be no way to arrive here from user space if CONFIG_COMPAT_32BIT_TIME is set, but since it is dead code, it should just get removed. On a 64-bit architecture, as well as a 32-bit architecture without CONFIG_COMPAT_32BIT_TIME, handling this command is a mistake, and the kernel should return an error. Fixes: 1a6c0b36dd19 ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-62/+80
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: v4l: subdev: Improve link format validation debug messagesSakari Ailus1-7/+41
The existing link format validation failure debug message in media-entity.c helped to pinpoint the point of failure but provided no additional information what's wrong. Tell the user exactly why the validation failed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-18media: v4l2-subdev: Introduce [get|set]_mbus_config pad opsJacopo Mondi1-0/+16
Introduce two new pad operations to allow retrieving and configuring the media bus parameters on a subdevice pad. The newly introduced operations aims to replace the s/g_mbus_config video operations, which have been on their way for deprecation since a long time. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-18media: v4l2-subdev: add v4l2_subdev_get_fwnode_pad_1_to_1Steve Longerbeam1-0/+22
Add a convenience function that can be used as the .get_fwnode_pad operation for subdevices that map port numbers and pad indexes 1:1. The function verifies the endpoint is owned by the subdevice, and if so returns the endpoint port number. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-12media: v4l2-subdev: add VIDIOC_SUBDEV_QUERYCAP ioctlHans Verkuil1-0/+11
While normal video/radio/vbi/swradio nodes have a proper QUERYCAP ioctl that apps can call to determine that it is indeed a V4L2 device, there is currently no equivalent for v4l-subdev nodes. Adding this ioctl will solve that, and it will allow utilities like v4l2-compliance to be used with these devices as well. SUBDEV_QUERYCAP currently returns the version and capabilities of the subdevice. Define a capability flag to report if the subdevice is registered in read-only mode. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-12media: v4l2-subdev: Guard whole fops and ioctl hdlrJacopo Mondi1-8/+31
A sub-device device node can be registered in user space only if the CONFIG_VIDEO_V4L2_SUBDEV_API Kconfig option is selected. Currently the open/close file operations and the ioctl handler have some parts of their implementations guarded by #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API), while they are actually not accessible without a video device node registered to user space. Guard the whole open, close and ioctl handler and provide stubs if the VIDEO_V4L2_SUBDEV_API Kconfig option is not selected. This slightly reduces the kernel size when the option is not selected and simplifies the file ops and ioctl implementations. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-12media: v4l2-dev: Add v4l2_device_register_ro_subdev_node()Jacopo Mondi1-0/+19
Add to the V4L2 core a function to register device nodes for video subdevices in read-only mode. Registering a device node in read-only mode is useful to expose to userspace the current sub-device configuration, without allowing application to change it by using the V4L2 subdevice ioctls. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-09media: v4l2-core: fix uninitialized structure fields being returned to userspaceColin Ian King1-1/+1
In the case where v4l2_event_dequeue fails the structure ev is not being filled and this garbage data from the stack is being copied to the ev32 structure and being copied back to userspace on the VIDIOC_DQEVENT_TIME32 ioctl. Fix this by ensuring the ev structure is zero'd to ensure uninitialized data is not leaked back. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 1a6c0b36dd19 ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-03media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABIArnd Bergmann1-1/+25
The v4l2_event structure contains a 'struct timespec' member that is defined by the user space C library, creating an ABI incompatibility when that gets updated to a 64-bit time_t. While passing a 32-bit time_t here would be sufficient for CLOCK_MONOTONIC timestamps, simply redefining the structure to use the kernel's __kernel_old_timespec would not work for any library that uses a copy of the linux/videodev2.h header file rather than including the copy from the latest kernel headers. This means the kernel has to be changed to handle both versions of the structure layout on a 32-bit architecture. The easiest way to do this is during the copy from/to user space. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-11-05media: v4l2-subdev: Don't use __u32 internallyJanusz Krzysztofik1-3/+3
Commit a8fa55078a77 ("media: v4l2-subdev: Verify arguments in v4l2_subdev_call()") and commit 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument") introduced a few local functions, unfortunately with arguments of type __u32, reserved for use in Linux uAPI. Use u32 instead. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-07-25media: v4l: ctrls: Add debug messagesEzequiel Garcia1-3/+3
Currently, the v4l2 control code is a bit silent on errors. Add debug messages on (hopefully) most of the error paths. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-11media: v4l2-subdev: fix regression in check_pad()Hans Verkuil1-1/+1
sd->entity.graph_obj.mdev can be NULL when this function is called, and that breaks existing drivers (rcar-vin, but probably others as well). Check if sd->entity.num_pads is non-zero instead since that doesn't depend on mdev. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Fixes: a8fa55078a77 ("media: v4l2-subdev: Verify arguments in v4l2_subdev_call()") Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: v4l2-subdev: Verify v4l2_subdev_call() pad config argumentJanusz Krzysztofik1-6/+21
Extend parameter checks performed by v4l2_subdev_call() with a check for a non-NULL pad config pointer if V4L2_SUBDEV_FORMAT_TRY format type is requested so drivers don't need to care. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: v4l2-subdev: Verify v4l2_subdev_call() pointer argumentsJanusz Krzysztofik1-0/+27
Parameters passed to check helpers are now obtained by dereferencing unverified pointer arguments. Check validity of those pointers first. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: v4l2-subdev: Verify arguments in v4l2_subdev_call()Janusz Krzysztofik1-92/+146
Correctness of format type (try or active) and pad number parameters passed to subdevice operation callbacks is now verified only for IOCTL calls. However, those callbacks are also used by drivers, e.g., V4L2 host interfaces. Since both subdev_do_ioctl() and drivers are using v4l2_subdev_call() macro while calling subdevice operations, move those parameter checks from subdev_do_ioctl() to v4l2_subdev_call() so we can avoid taking care of those checks inside drivers. Define a wrapper function for each operation callback in scope, then gather those wrappers in a static v4l2_subdev_ops structure so the v4l2_subdev_call() macro can find them easy if provided. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19media: v4l2-subdev: handle module refcounting hereHans Verkuil1-13/+9
The module ownership refcounting was done in media_entity_get/put, but that was very confusing and it did not work either in case an application had a v4l-subdevX device open and the module was unbound. When the v4l-subdevX device was closed the media_entity_put was never called and the module refcount was left one too high, making it impossible to unload it. Since v4l2-subdev.c was the only place where media_entity_get/put was called, just move the functionality to v4l2-subdev.c and drop those confusing entity functions. Store the module in subdev_fh so module_put no longer depends on the media_entity struct. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-31Merge tag 'media/v4.20-2' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull new experimental media request API from Mauro Carvalho Chehab: "A new media request API This API is needed to support device drivers that can dynamically change their parameters for each new frame. The latest versions of Google camera and codec HAL depends on such feature. At this stage, it supports only stateless codecs. It has been discussed for a long time (at least over the last 3-4 years), and we finally reached to something that seem to work. This series contain both the API and core changes required to support it and a new m2m decoder driver (cedrus). As the current API is still experimental, the only real driver using it (cedrus) was added at staging[1]. We intend to keep it there for a while, in order to test the API. Only when we're sure that this API works for other cases (like encoders), we'll move this driver out of staging and set the API into a stone. [1] We added support for the vivid virtual driver (used only for testing) to it too, as it makes easier to test the API for the ones that don't have the cedrus hardware" * tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits) media: dt-bindings: Document the Rockchip VPU bindings media: platform: Add Cedrus VPU decoder driver media: dt-bindings: media: Document bindings for the Cedrus VPU driver media: v4l: Add definition for the Sunxi tiled NV12 format media: v4l: Add definitions for MPEG-2 slice format and metadata media: videobuf2-core: Rework and rename helper for request buffer count media: v4l2-ctrls.c: initialize an error return code with zero media: v4l2-compat-ioctl32.c: add missing documentation for a field media: media-request: update documentation media: media-request: EPERM -> EACCES/EBUSY media: v4l2-ctrls: improve media_request_(un)lock_for_update media: v4l2-ctrls: use media_request_(un)lock_for_access media: media-request: add media_request_(un)lock_for_access media: vb2: set reqbufs/create_bufs capabilities media: videodev2.h: add new capabilities for buffer types media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF media: v4l2-ctrls: return -EACCES if request wasn't completed media: media-request: return -EINVAL for invalid request_fds media: vivid: add request support media: vivid: add mc ...
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab1-1/+1
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31media: v4l2-ctrls: support g/s_ext_ctrls for requestsHans Verkuil1-3/+6
The v4l2_g/s_ext_ctrls functions now support control handlers that represent requests. The v4l2_ctrls_find_req_obj() function is responsible for finding the request from the fd. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: v4l: Add support for STD ioctls on subdev nodesNiklas Söderlund1-0/+22
There is no way to control the standard of subdevices which are part of a media device. The ioctls which exists all target video devices explicitly and the idea is that the video device should talk to the subdevice. For subdevices part of a media graph this is not possible and the standard must be controlled on the subdev device directly. Add four new ioctls to be able to directly interact with subdevices and control the video standard; VIDIOC_SUBDEV_ENUMSTD, VIDIOC_SUBDEV_G_STD, VIDIOC_SUBDEV_S_STD and VIDIOC_SUBDEV_QUERYSTD. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.