aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends
AgeCommit message (Collapse)AuthorFilesLines
2014-11-21[media] rtl2832: implement option to bypass slave demod TSAntti Palosaari2-3/+68
Implement partial PIP mode to carry TS from slave demodulator, through that master demodulator. RTL2832 demod has TS input interface to connected another demodulator TS output. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: move to stagingAntti Palosaari4-509/+0
It is not ready enough to be released on mainline. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: convert to RegMap APIAntti Palosaari3-146/+90
Convert driver to I2C RegMap API. That offers unified register access routines, register value caching and more. We need 3 register maps, one for each register page, as chips has 3 I2C address. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: convert driver to I2C bindingAntti Palosaari3-110/+162
Driver was using DVB proprietary binding model. As it is I2C device, we could change it to normal kernel I2C driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: improve IF frequency and BW handlingAntti Palosaari1-17/+47
Separate IF and BW based registers. Add support for DVB-T and DVB-T2 6MHz channel bandwidth. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: implement DVB-T modeAntti Palosaari1-1/+10
Implement DVB-T mode. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: add support for DVB-T2Antti Palosaari1-7/+38
Add support for DVB-T2. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88473: Panasonic MN88473 DVB-T/T2/C demod driverAntti Palosaari5-0/+481
Only DVB-C is implemented. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: move to stagingAntti Palosaari4-568/+0
It is not ready enough to be released on mainline. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: implement DVB-T and DVB-T2Antti Palosaari1-41/+135
Implement initial support for DVB-T and DVB-T2 modes. Now driver has basic support for all the modes, DVB-C/T/T2. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: Convert driver to I2C RegMap APIAntti Palosaari3-119/+64
Convert driver to I2C RegMap API. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: convert driver to I2C clientAntti Palosaari3-112/+165
It uses I2C bus so better to implement it as a standard I2C driver model. It was using proprietary DVB binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: rename state to devAntti Palosaari2-71/+72
Rename state to dev. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: rename mn88472_c.c => mn88472.cAntti Palosaari4-24/+23
Original plan was to implement driver as one file per used demod standard (mn88472_c.c, mn88472_t.c and mn88472_t2.c). However, that plan was a mistake as driver code differences are so small between different standards. Due to that rename this file and implement all the needed functionality to that file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: add small delay to wait DVB-C lockAntti Palosaari1-0/+9
400ms delay seems to be enough in order to gain DVB-C lock. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: correct attach symbol nameAntti Palosaari1-2/+2
Wrong symbol name causes demod attach failure. Reported-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14[media] mn88472: Panasonic MN88472 demod driver (DVB-C only)Antti Palosaari5-0/+505
Only DVB-C mode is supported, DVB-T and DVB-T2 are not supported. Very much feature reduced version, no signal statistics nor normal chip configuration options. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11[media] m88ds3103: change ts clock config for serial modenibble.max1-30/+25
1> When m88ds3103 works in serial ts mode, its serial ts clock is equal to ts master clock and the clock divider is bypassed. 2> The serial ts clock is configed by the bridge driver just like parallel ts clock. Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-11Merge tag 'v3.18-rc4' into patchworkMauro Carvalho Chehab3-12/+17
Needed due to some important regression fixes at RC core. * commit 'v3.18-rc4': (587 commits) Linux 3.18-rc4 ARM: dts: zynq: Enable PL clocks for Parallella tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address USB: Update default usb-storage delay_use value in kernel-parameters.txt sysfs: driver core: Fix glue dir race condition by gdp_mutex MIPS: Fix build with binutils 2.24.51+ xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() USB: cdc-acm: add quirk for control-line state requests tty: Fix pty master poll() after slave closes v2 MIPS: R3000: Fix debug output for Virtual page number ... Conflicts: drivers/media/rc/rc-main.c
2014-11-05[media] cx24110: Simplify error handling at cx24110_set_fec()Mauro Carvalho Chehab1-13/+11
move the return to happen before the logic. This way, we can avoid one extra identation. This also fixes an identation issue on this function. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx23110: Fix return code for cx24110_set_fec()Mauro Carvalho Chehab1-2/+1
When a parameter is invalid, the right return code is -EINVAL. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx24110: Fix whitespaces at cx24110_set_fec()Mauro Carvalho Chehab1-12/+13
It is hard to read what's there, because it doesn't follow the CodingStyle. Add missing whitespaces to split function arguments. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx24110: Fix a spatch warningMauro Carvalho Chehab1-5/+5
This is actually a false positive: drivers/media/dvb-frontends/cx24110.c:210 cx24110_set_fec() error: buffer overflow 'rate' 7 <= 8 But fixing it is easy: just ensure that the table size will be limited to FEC_AUTO. While here, fix spacing on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] cx22700: Fix potential buffer overflowMauro Carvalho Chehab1-0/+3
As new FEC types were added, we need a check to avoid overflows: drivers/media/dvb-frontends/cx22700.c:172 cx22700_set_tps() error: buffer overflow 'fec_tab' 6 <= 6 drivers/media/dvb-frontends/cx22700.c:173 cx22700_set_tps() error: buffer overflow 'fec_tab' 6 <= 6 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] stb0899: don't go past DiSEqC msg bufferMauro Carvalho Chehab1-1/+1
As reported by spatch: drivers/media/dvb-frontends/stb0899_drv.c:720 stb0899_send_diseqc_msg() error: buffer overflow 'cmd->msg' 6 <= 7 The buffer size is 6 and not 8. Anyway, the best is to use sizeof(), to avoid such mistakes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] stv090x: Fix delivery system settingMauro Carvalho Chehab1-1/+14
As sparse complains: drivers/media/dvb-frontends/stv090x.c:3471:30: warning: mixing different enum types drivers/media/dvb-frontends/stv090x.c:3471:30: int enum fe_delivery_system versus drivers/media/dvb-frontends/stv090x.c:3471:30: int enum stv090x_delsys There's actually an error when setting the delivery system on stv090x_search(): it is using the DVBv5 macros as if they were the stv090x ones. Instead, we should convert between the two namespaces, returning an error if an unsupported delivery system is requested. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05[media] af0933: Don't go past arraysMauro Carvalho Chehab1-1/+22
X-Patchwork-Delegate: m.chehab@samsung.com Fixes the following sparse warnings: drivers/media/dvb-frontends/af9033.c:295 af9033_init() error: buffer overflow 'clock_adc_lut' 11 <= 11 drivers/media/dvb-frontends/af9033.c:300 af9033_init() error: buffer overflow 'clock_adc_lut' 11 <= 11 drivers/media/dvb-frontends/af9033.c:584 af9033_set_frontend() error: buffer overflow 'coeff_lut' 3 <= 3 drivers/media/dvb-frontends/af9033.c:595 af9033_set_frontend() error: buffer overflow 'clock_adc_lut' 11 <= 11 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: continue polling unless critical IO errorAntti Palosaari1-1/+1
That case is not IO error, so better to jump out now, but still continue polling. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: return 0.1 dB DVBv3 SNR for AF9030 familyAntti Palosaari1-18/+25
Previous patch changed both AF9030 and IT9130 SNR reporting from dB to relative. Restore AF9030 to old behavior as it has been always returning 0.1 dB value. Leave IT9130 relative as old IT9130 was returning relative values. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix DVBv3 snr value not correct issueBimow Chen2-4/+62
Snr returns value not correct. Fix it. Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: improve read_signal_strength error handling slightlyAntti Palosaari1-4/+6
Check return status after each register access routine and avoid masking return status values. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix AF9033 DVBv3 signal strength measurementAntti Palosaari1-1/+5
Previous patch changes used signal strength firmware register from 0x800048 to 0x80004a in case of AF9033/AF9035 chip. In practice reported values were running upside-down, when RR strength increases reported value decreases and vice versa. That is because of 0x80004a returns values that are dBm scale, but negative RF strength dBm returned as positive number. 0x800048 returns 0-100, like percentage 0x80004a returns 0-255 dBm, without a negative sign So restore old measurement now. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix DVBv3 signal strength value not correct issueBimow Chen2-8/+41
Register 0x800048 is not dB measure but relative scale. Fix it and conform to NorDig specifications. Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] si2168: do not print device is warm every-time when openedAntti Palosaari1-2/+1
It repeated "found a 'Silicon Labs Si2168' in warm state" everytime when device was opened. Message is aimed to point out firmware is downloaded, up and running. So print it only in case firmware download is performed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] sp2: sp2_init() can be staticFengguang Wu1-2/+2
drivers/media/dvb-frontends/sp2.c:269:5: sparse: symbol 'sp2_init' was not declared. Should it be static? drivers/media/dvb-frontends/sp2.c:351:5: sparse: symbol 'sp2_exit' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] m88ds3103: add support for the demod of M88RS6000nibble.max2-78/+345
M88RS6000 is the integrated chip, which includes tuner and demod. Its internal demod is similar with M88DS3103 except some registers definition. The main different part of this internal demod from others is its clock/pll generation IP block sitting inside the tuner die. So clock/pll functions should be configed through its tuner i2c bus, NOT its demod i2c bus. The demod of M88RS6000 need the firmware: dvb-demod-m88rs6000.fw firmware download link: http://www.dvbsky.net/download/linux/dvbsky-firmware.tar.gz Signed-off-by: Nibble Max <nibble.max@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb:tc90522: fix always-false expressionAkihiro Tsukada1-1/+1
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb:tc90522: fix stats reportAkihiro Tsukada1-9/+7
* report the fixed per-transponder symbolrate instead of per-TS ones * add output TS-ID report Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] stv090x: remove indent levels in stv090x_get_coldlock()Dan Carpenter1-82/+80
This code is needlessly complicated and checkpatch.pl complains that we go over the 80 characters per line limit. If we flip the "if (!lock) {" test to "if (lock) return;" then we can remove an indent level from the rest of the function. We can add two returns in the "if (state->srate >= 10000000) {" condition and move the else statement back an additional indent level. There is another "if (!lock) {" check which can be removed since we have already checked "lock" and know it is zero at this point. This second check on "lock" is also a problem because it sets off a static checker warning. I have reviewed this code for some time to see if something else was intended, but have concluded that it was simply an oversight and should be removed. Removing this duplicative check gains us an third indent level. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] au8522: improve lock performance with ZeeVee modulatorsRichard Vollkommer1-7/+110
Improves lock performance with signals from the ZeeVee family of modulators. Signed-off-by: Richard Vollkommer <linux@hauppauge.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-frontends/Kconfig: better describe Toshiba TC90522ほち1-1/+4
Toshiba TC90522 is wrongly categorized, fix it Signed-off-by: ほち, AreMa Inc <knightrider@are.ma> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] ds3000: fix LNB supply voltage on Tevii S480 on initializationUlrich Eckhardt1-0/+7
The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not automatically power down. This blocks other receivers connected to a satellite channel router (EN50494), since the receivers can not send the required DiSEqC sequences when the Tevii card is connected to a the same SCR. This patch switches off the LNB supply voltage on initialization of the frontend. [mchehab@osg.samsung.com: add a comment about why we're explicitly turning off voltage at device init] Cc: stable@vger.kernel.org Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] sp2: improve debug loggingOlli Salonen1-8/+11
Improve debugging output. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] sp2: fix incorrect structOlli Salonen1-1/+1
Incorrect struct used in the SP2 driver. Reported-by: Max Nibble <nibble.max@gmail.com> Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] drxk: Fix debug printksMauro Carvalho Chehab1-3/+3
This patch partially reverts 0fb220f2a5cb. What happened is that the conversion of debug messages to use pr_debug() was a bad idea, because one needing to debug would need to both enable debug level via a modprobe parameter, and then to enable the dynamic printk's. So, for now, let's use printk() directly at dprintk(). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] dib7000p: get rid of an unused argumentMauro Carvalho Chehab1-5/+4
dib7000p is for DVB, and not ISDB. So, there's no layer. That removes this compilation warning: drivers/media/dvb-frontends/dib7000p.c:1972: warning: 'i' is used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-10Merge tag 'media/v3.18-rc1' of ↵Linus Torvalds42-628/+2977
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new IR driver: hix5hd2-ir - the virtual test driver (vivi) was replaced by vivid, with has an almost complete set of features to emulate most v4l2 devices and properly test all sorts of userspace apps - the as102 driver had several bugs fixed and was properly split into a frontend and a core driver. With that, it got promoted from staging into mainstream - one new CI driver got added for CIMaX SP2/SP2HF (sp2 driver) - one new frontend driver for Toshiba ISDB-T/ISDB-S demod (tc90522) - one new PCI driver for ISDB-T/ISDB-S (pt3 driver) - saa7134 driver got support for go7007-based devices - added a new PCI driver for Techwell 68xx chipsets (tw68) - a new platform driver was added (coda) - new tuner drivers: mxl301rf and qm1d1c0042 - a new DVB USB driver was added for DVBSky S860 & similar devices - added a new SDR driver (hackrf) - usbtv got audio support - several platform drivers are now compiled with COMPILE_TEST - a series of compiler fixup patches, making sparse/spatch happier with the media stuff and removing several warnings, especially on those platform drivers that didn't use to compile on x86 - Support for several new modern devices got added - lots of other fixes, improvements and cleanups * tag 'media/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ...
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds1-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-09Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab42-628/+2977
* patchwork: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... Conflicts: Documentation/DocBook/media/v4l/compat.xml
2014-09-26[media] dvb-frontends: use %zu instead of %zdMauro Carvalho Chehab4-4/+4
size_t is unsigned. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Powered by cgit, Gruvboxed by Blaster4385.