aboutsummaryrefslogtreecommitdiff
path: root/drivers/leds/led-class.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-28leds/led-class: Add missing put_device()Ricardo Ribalda Delgado1-2/+5
Devices found by class_find_device must be freed with put_device(). Otherwise the reference count will not work properly. Fixes: a96aa64cb572 ("leds/led-class: Handle LEDs with the same name") Reported-by: Alan Tull <[email protected]> Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Jacek Anaszewski <[email protected]>
2015-07-01Merge branch 'for-next' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem updates from Bryan Wu: "In this cycle, we finished to merge patches for LED Flash class driver. Other than that we have some bug fixes and new drivers for LED controllers" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (33 commits) leds:lp55xx: fix firmware loading error leds: fix max77693-led build errors leds: fix aat1290 build errors leds: aat1290: pass flags parameter to devm_gpiod_get leds: ktd2692: pass flags parameter to devm_gpiod_get drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c leds: aat1290: add support for V4L2 Flash sub-device DT: aat1290: Document handling external strobe sources leds: max77693: add support for V4L2 Flash sub-device media: Add registration helpers for V4L2 flash sub-devices v4l: async: Add a pointer to of_node to struct v4l2_subdev, match it Documentation: leds: Add description of v4l2-flash sub-device leds: add BCM6358 LED driver leds: add DT binding for BCM6358 LED controller leds: fix brightness changing when software blinking is active Documentation: leds-lp5523: describe master fader attributes leds: lp5523: add master_fader support leds: leds-gpio: Allow compile test if !GPIOLIB leds: leds-gpio: Add missing #include <linux/of.h> gpiolib: Add missing dummies for the unified device properties interface ...
2015-05-25leds: fix brightness changing when software blinking is activeStas Sergeev1-0/+5
The following sequence: echo timer >/sys/class/leds/<name>/trigger echo 1 >/sys/class/leds/<name>/brightness should change the ON brightness for blinking. The function led_set_brightness() was mistakenly initiating the delayed blink stop procedure, which resulted in no blinking with the timer trigger still active. This patch fixes the problem by changing led_set_brightness() to not initiate the delayed blink stop when brightness is not 0. CC: Richard Purdie <[email protected]> CC: Kyungmin Park <[email protected]> CC: [email protected] CC: [email protected] Acked-by: Jacek Anaszewski <[email protected]> Signed-off-by: Stas Sergeev <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2015-05-12leds / PM: fix hibernation on arm when gpio-led used with CPU led triggerGrygorii Strashko1-4/+3
Setting a dev_pm_ops suspend/resume pair of callbacks but not a set of hibernation callbacks means those pm functions will not be called upon hibernation - that leads to system crash on ARM during freezing if gpio-led is used in combination with CPU led trigger. It may happen after freeze_noirq stage (GPIO is suspended) and before syscore_suspend stage (CPU led trigger is suspended) - usually when disable_nonboot_cpus() is called. Log: PM: noirq freeze of devices complete after 1.425 msecs Disabling non-boot CPUs ... ^ system may crash or stuck here with message (TI AM572x) WARNING: CPU: 0 PID: 3100 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x22c/0x370() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in Supervisor mode during Functional access CPU1: shutdown ^ or here Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the suspend and hibernation callbacks and move led_suspend/led_resume under CONFIG_PM_SLEEP to avoid build warnings. Fixes: 73e1ab41a80d (leds: Convert led class driver from legacy pm ops to dev_pm_ops) Signed-off-by: Grygorii Strashko <[email protected]> Acked-by: Jacek Anaszewski <[email protected]> Cc: 3.11+ <[email protected]> # 3.11+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2015-03-30leds: Don't treat the LED name as a format stringSakari Ailus1-1/+1
The LED name was wrongly interpreted as format string. Stop doing that. Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Bryan Wu <[email protected]> Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
2015-03-30leds: Use log level warn instead of info when telling about a name clashSakari Ailus1-1/+1
The LED names are expected to be unique in the system. Use KERN_WARNING log level to notify the user about the matter. Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Bryan Wu <[email protected]> Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
2015-03-30leds/led-class: Handle LEDs with the same nameRicardo Ribalda Delgado1-2/+37
The current code expected that every LED had an unique name. This is a legit expectation when the device tree can no be modified or extended. But with device tree overlays this requirement can be easily broken. This patch finds out if the name is already in use and adds the suffix _1, _2... if not. Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2015-03-09leds: Introduce devres helper for led_classdev_registerBjorn Andersson1-0/+57
([email protected]: add _unregister function into the document) Suggested-by: Stephen Boyd <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2015-01-26leds: Add LED Flash class extension to the LED subsystemJacek Anaszewski1-0/+4
Some LED devices support two operation modes - torch and flash. This patch provides support for flash LED devices in the LED subsystem by introducing new sysfs attributes and kernel internal interface. The attributes being introduced are: flash_brightness, flash_strobe, flash_timeout, max_flash_timeout, max_flash_brightness, flash_fault, flash_sync_strobe and available_sync_leds. All the flash related features are placed in a separate module. The modifications aim to be compatible with V4L2 framework requirements related to the flash devices management. The design assumes that V4L2 sub-device can take of the LED class device control and communicate with it through the kernel internal interface. When V4L2 Flash sub-device file is opened, the LED class device sysfs interface is made unavailable. Signed-off-by: Jacek Anaszewski <[email protected]> Acked-by: Kyungmin Park <[email protected]> Cc: Richard Purdie <[email protected]> Acked-by: Pavel Machek <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2015-01-14leds: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-11-14leds: Add support for setting brightness in a synchronous wayJacek Anaszewski1-4/+6
There are use cases when setting a LED brightness has to have immediate effect (e.g. setting a torch LED brightness). This patch extends LED subsystem to support such operations. The LED subsystem internal API __led_set_brightness is changed to led_set_brightness_async and new led_set_brightness_sync API is added. Signed-off-by: Jacek Anaszewski <[email protected]> Acked-by: Kyungmin Park <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-11-14leds: implement sysfs interface locking mechanismJacek Anaszewski1-3/+16
Add a mechanism for locking LED subsystem sysfs interface. This patch prepares ground for addition of LED Flash Class extension, whose API will be integrated with V4L2 Flash API. Such a fusion enforces introducing a locking scheme, which will secure consistent access to the LED Flash Class device. The mechanism being introduced allows for disabling LED subsystem sysfs interface by calling led_sysfs_disable function and enabling it by calling led_sysfs_enable. The functions alter the LED_SYSFS_DISABLE flag state and must be called under mutex lock. The state of the lock is checked with use of led_sysfs_is_disabled function. Such a design allows for providing immediate feedback to the user space on whether the LED Flash Class device is available or is under V4L2 Flash sub-device control. Signed-off-by: Jacek Anaszewski <[email protected]> Acked-by: Kyungmin Park <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-09-12leds: Improve and export led_update_brightnessJacek Anaszewski1-6/+0
led_update_brightness helper function used to be exploited only locally in the led-class.c module, where its result was being passed to the brightness_show sysfs callback. With the introduction of v4l2-flash subdevice the same functionality becomes required for reading current brightness from a LED device. This patch adds checking of return value of the brightness_get callback and moves the led_update_brightness() function to the LED subsystem public API. Signed-off-by: Jacek Anaszewski <[email protected]> Acked-by: Kyungmin Park <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-09-11leds: avoid using DEVICE_ATTR macro for max_brightness attributeJacek Anaszewski1-2/+2
Make definition of the brightness related sysfs attributes consistent. The modification entails change of the function name: led_max_brightness_show -> max_brightness_show Signed-off-by: Jacek Anaszewski <[email protected]> Acked-by: Sakari Ailus <[email protected]> Acked-by: Kyungmin Park <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-09-11leds: Reorder include directivesJacek Anaszewski1-6/+7
Reorder include directives so that they are arranged in alphabetical order. Signed-off-by: Jacek Anaszewski <[email protected]> Acked-by: Kyungmin Park <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-09-02Revert "leds: convert blink timer to workqueue"Jiri Kosina1-7/+7
This reverts commit 8b37e1bef5a6b60e949e28a4db3006e4b00bd758. It's broken as it changes led_blink_set() in a way that it can now sleep (while synchronously waiting for workqueue to be cancelled). That's a problem, because it's possible that this function gets called from atomic context (tpt_trig_timer() takes a readlock and thus disables preemption). This has been brought up 3 weeks ago already [1] but no proper fix has materialized, and I keep seeing the problem since 3.17-rc1. [1] https://lkml.org/lkml/2014/8/16/128 BUG: sleeping function called from invalid context at kernel/workqueue.c:2650 in_atomic(): 1, irqs_disabled(): 0, pid: 2335, name: wpa_supplicant 5 locks held by wpa_supplicant/2335: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff814c7c92>] rtnl_lock+0x12/0x20 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffffc06e649c>] cfg80211_mgd_wext_siwessid+0x5c/0x180 [cfg80211] #2: (&local->mtx){+.+.+.}, at: [<ffffffffc0817dea>] ieee80211_prep_connection+0x17a/0x9a0 [mac80211] #3: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffc08081ed>] ieee80211_vif_use_channel+0x5d/0x2a0 [mac80211] #4: (&trig->leddev_list_lock){.+.+..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211] CPU: 0 PID: 2335 Comm: wpa_supplicant Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffff8800360b5a50 ffff8800751f76d8 ffffffff8159e97f ffff8800360b5a30 ffff8800751f76e8 ffffffff810739a5 ffff8800751f77b0 ffffffff8106862f ffffffff810685d0 0aa2209200000000 ffff880000000004 ffff8800361c59d0 Call Trace: [<ffffffff8159e97f>] dump_stack+0x4d/0x66 [<ffffffff810739a5>] __might_sleep+0xe5/0x120 [<ffffffff8106862f>] flush_work+0x5f/0x270 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90 [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211] [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211] [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [<ffffffffc06e36c0>] ? cfg80211_wext_giwessid+0x50/0x50 [cfg80211] [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0 [<ffffffff81584fa0>] ? ioctl_standard_iw_point+0x3e0/0x3e0 [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100 [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0 [<ffffffff814cfb29>] dev_ioctl+0x329/0x620 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0 [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520 [<ffffffff815a67fb>] ? sysret_check+0x1b/0x56 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0 [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f wlan0: send auth to 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: authenticated wlan0: associate with 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: RX AssocResp from 00:0b:6b:3c:8c:e4 (capab=0x431 status=0 aid=2) wlan0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: NA wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:0b:6b:3c:8c:e4 ================================= [ INFO: inconsistent lock state ] 3.17.0-rc3 #1 Not tainted --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ((&(&led_cdev->blink_work)->work)){+.?...}, at: [<ffffffff810685d0>] flush_work+0x0/0x270 {SOFTIRQ-ON-W} state was registered at: [<ffffffff81094dbe>] __lock_acquire+0x30e/0x1a30 [<ffffffff81096c81>] lock_acquire+0x91/0x110 [<ffffffff81068608>] flush_work+0x38/0x270 [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211] [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211] [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0 [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0 [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100 [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0 [<ffffffff814cfb29>] dev_ioctl+0x329/0x620 [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0 [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520 [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0 [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f irq event stamp: 493416 hardirqs last enabled at (493416): [<ffffffff81068a5f>] __cancel_work_timer+0x6f/0x100 hardirqs last disabled at (493415): [<ffffffff81067e9f>] try_to_grab_pending+0x1f/0x160 softirqs last enabled at (493408): [<ffffffff81053ced>] _local_bh_enable+0x1d/0x50 softirqs last disabled at (493409): [<ffffffff81054c75>] irq_exit+0xa5/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((&(&led_cdev->blink_work)->work)); <Interrupt> lock((&(&led_cdev->blink_work)->work)); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: (((&tpt_trig->timer))){+.-...}, at: [<ffffffff810b4c50>] call_timer_fn+0x0/0x180 #1: (&trig->leddev_list_lock){.+.?..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffffffff8246eb30 ffff88007c203b00 ffffffff8159e97f ffffffff81a194c0 ffff88007c203b50 ffffffff81599c29 0000000000000001 ffffffff00000001 ffff880000000000 0000000000000006 ffffffff81a194c0 ffffffff81093ad0 Call Trace: <IRQ> [<ffffffff8159e97f>] dump_stack+0x4d/0x66 [<ffffffff81599c29>] print_usage_bug+0x1f4/0x205 [<ffffffff81093ad0>] ? check_usage_backwards+0x140/0x140 [<ffffffff810944d3>] mark_lock+0x223/0x2b0 [<ffffffff81094d60>] __lock_acquire+0x2b0/0x1a30 [<ffffffff81096c81>] lock_acquire+0x91/0x110 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff81068608>] flush_work+0x38/0x270 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90 [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff8109469d>] ? trace_hardirqs_on_caller+0xad/0x1c0 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffff810b4cc5>] call_timer_fn+0x75/0x180 [<ffffffff810b4c50>] ? process_timeout+0x10/0x10 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff810b50ac>] run_timer_softirq+0x1fc/0x2f0 [<ffffffff81054805>] __do_softirq+0x115/0x2e0 [<ffffffff81054c75>] irq_exit+0xa5/0xb0 [<ffffffff810049b3>] do_IRQ+0x53/0xf0 [<ffffffff815a74af>] common_interrupt+0x6f/0x6f <EOI> [<ffffffff8147b56e>] ? cpuidle_enter_state+0x6e/0x180 [<ffffffff8147b732>] cpuidle_enter+0x12/0x20 [<ffffffff8108bba0>] cpu_startup_entry+0x330/0x360 [<ffffffff8158fb51>] rest_init+0xc1/0xd0 [<ffffffff8158fa90>] ? csum_partial_copy_generic+0x170/0x170 [<ffffffff81af3ff2>] start_kernel+0x44f/0x45a [<ffffffff81af399c>] ? set_init_arg+0x53/0x53 [<ffffffff81af35ad>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81af36a0>] x86_64_start_kernel+0xf1/0xf4 Cc: Vincent Donnefort <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Tejun Heo <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-07-03leds: convert blink timer to workqueueVincent Donnefort1-7/+7
This patch converts the blink timer from led-core to workqueue which is more suitable for this kind of non-priority operations. Moreover, timer may lead to errors when a LED setting function use a scheduling function such as pinctrl which is using mutex. Signed-off-by: Vincent Donnefort <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2014-06-25leds: add led-class attribute-group supportJohan Hovold1-2/+3
Allow led-class devices to be created with optional attribute groups. This is needed in order to allow led drivers to create custom device attributes in a race-free manner. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2013-07-26leds: convert class code to use dev_groupsGreg Kroah-Hartman1-8/+30
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the led class code to use the correct field. Acked-by: Bryan Wu <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-06-20leds: Convert led class driver from legacy pm ops to dev_pm_opsShuah Khan1-3/+7
Convert drivers/leds/led-class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, led class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the led class. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2012-11-27leds: led-class: Fix checkpatch warningSachin Kamat1-1/+1
Fixes the following checkpatch warning: WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... FILE: leds/led-class.c:214: printk(KERN_DEBUG "Registered led device: %s\n", Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2012-09-11leds: delay led_set_brightness if stopping soft-blinkFabio Baltieri1-0/+15
Delay execution of led_set_brightness() if need to stop soft-blink timer. This allows led_set_brightness to be called in hard-irq context even if soft-blink was activated on that LED. Signed-off-by: Fabio Baltieri <[email protected]> Cc: Pawel Moll <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2012-07-24leds: Rename led_brightness_set() to led_set_brightness()Shuah Khan1-1/+1
Rename leds external interface led_brightness_set() to led_set_brightness(). This is the second phase of the change to reduce confusion between the leds internal and external interfaces that set brightness. With this change, now the external interface is led_set_brightness(). The first phase renamed the internal interface led_set_brightness() to __led_set_brightness(). There are no changes to the interface implementations. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2012-07-24leds: Rename led_set_brightness() to __led_set_brightness()Shuah Khan1-3/+3
Rename leds internal interface led_set_brightness() to __led_set_brightness() to reduce confusion between led_set_brightness() and the external interface led_brightness_set(). led_brightness_set() cancels the timer and then calls led_set_brightness(). Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2012-07-24leds: add oneshot blink functionsFabio Baltieri1-0/+19
Add two new functions, led_blink_set_oneshot and led_trigger_blink_oneshot, to be used by triggers for one-shot blink of led devices. This is implemented extending the existing software-blink code, and uses the same timer and handler function. The behavior of the code is to do a blink-on, blink-off sequence when the function is called, ignoring other calls until the sequence is completed so that the leds keep blinking at constant rate if the functions are called repeatedly. This is meant to be used by drivers which needs to trigger on sporadic event, but doesn't have clear busy/idle trigger points. After the blink sequence the led remains off. This behavior can be inverted setting the "invert" argument, which blink the led off, than on and leave the led on after the sequence. ([email protected]: rebase to commit 'leds: don't disable blinking when writing the same value to delay_on or delay_off') Signed-off-by: Fabio Baltieri <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2012-06-12leds: fixed a coding style issue.Jeffrin Jose1-1/+1
Fixed a coding style issue relating to trailing white space error found by checkpatch.pl tool in drivers/leds/led-class.c Signed-off-by: Jeffrin Jose <[email protected]> Signed-off-by: Bryan Wu <[email protected]>
2012-05-29leds: simple_strtoul() cleanupShuah Khan1-13/+8
led-class.c and ledtrig-timer.c still use simple_strtoul(). Change them to use kstrtoul() instead of obsolete simple_strtoul(). Also fix the existing int ret declaration to be ssize_t to match the return type for _store functions in ledtrig-timer.c. Signed-off-by: Shuah Khan <[email protected]> Cc: Joe Perches <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Bryan Wu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-03-23led-class: change back LEDS_CLASS to tristate instead of boolBryan Wu1-70/+0
After moving some core functions to led-core.c, led-class.c can be built as module again. Signed-off-by: Bryan Wu <[email protected]> Acked-by: Richard Purdie <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman1-1/+0
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <[email protected]> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-12-21driver-core: remove sysdev.h usage.Kay Sievers1-1/+0
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <[email protected]> Cc: Scott Branden <[email protected]> Cc: Russell King <[email protected]> Cc: Kukjin Kim <[email protected]> Cc: David Brown <[email protected]> Cc: Daniel Walker <[email protected]> Cc: Bryan Huntsman <[email protected]> Cc: Ben Dooks <[email protected]> Cc: Wan ZongShun <[email protected]> Cc: Haavard Skinnemoen <[email protected]> Cc: Hans-Christian Egtvedt <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Grant Likely <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Matthew Garrett <[email protected]> Signed-off-by: Kay Sievers <[email protected]>
2011-11-15Revert "leds: save the delay values after a successful call to blink_set()"Johan Hovold1-4/+1
Revert commit 6123b0e274503a0d3588e84fbe07c9aa01bfaf5d. The problem this patch intends to solve has alreadqy been fixed by commit 7a5caabd090b ("drivers/leds/ledtrig-timer.c: fix broken sysfs delay handling"). Signed-off-by: Johan Hovold <[email protected]> Cc: Antonio Ospite <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Richard Purdie <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-10-31leds: turn the blink_timer off before starting to blinkAntonio Ospite1-0/+2
Depending on the implementation of the hardware blinking function in blink_set(), the led can support hardware blinking for some values of delay_on and delay_off and fall-back to software blinking for some other values. Turning off the blink_timer unconditionally before starting to blink make sure that a sequence like: OFF hardware blinking software blinking hardware blinking does not leave the software blinking timer active. Signed-off-by: Antonio Ospite <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Cc: Richard Purdie <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-10-31leds: save the delay values after a successful call to blink_set()Antonio Ospite1-1/+4
When calling the hardware blinking function implemented by blink_set(), the delay_on and delay_off values are not preserved across calls. Fix that and make the "timer" trigger work as expected when hardware blinking is available. BEFORE the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 0 0 $ echo 100 > delay_off $ cat delay_on delay_off 0 0 AFTER the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 100 0 $ echo 100 > delay_off $ cat delay_on delay_off 100 100 Signed-off-by: Antonio Ospite <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Cc: Richard Purdie <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-25leds: support automatic start of blinking with ledtrig-timerEsben Haabendal1-1/+2
By setting initial values blink_delay_on and blink_delay_off in a led_classdev struct, this change starts the blinking when the led is initialized. With this patch, you can initialize blink_delay_on and blink_delay_off in led_classdev with default_trigger set to "timer", and the led will start up blinking. The current ledtrig-timer implementation ignores any initial blink_delay_on/blink_delay_off settings, and requires setting blink_delay_on/blink_delay_off (typically from userspace) before the led blinks. Signed-off-by: Esben Haabendal <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Randy Dunlap <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-12-22led_class: fix typo in blink APIJohannes Berg1-1/+1
When I added led_blink_set I had a typo: the return value of the hw offload is a regular error code that is zero when succesful, and in that case software emulation should not be used, rather than the other way around. Signed-off-by: Johannes Berg <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-11-12led-class: always implement blinkingJohannes Berg1-1/+104
Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: Johannes Berg <[email protected]> Acked-by: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-05-26leds: led-class: set permissions on max_brightness file to 0444Axel Lin1-1/+1
max_brightness is not writable, thus set permissions to 0444. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
2010-03-16leds: Fix race between LED device uevent and actual attributes creationFlorian Fainelli1-32/+8
If we were to dynamically register/unregister leds and have udev or other daemons handle the leds class uevents, we would be notified of the adding of a new LED and if the daemon immediately tries to open one of the attributes of the led device, it would fail with a "no such file or directory" error since this the attributes are not yet created. Fix this by switching attributes to be class-wide, such that the driver core will register these attributes with device_add_attrs and then emit the kobject_uevent ADD signal. Signed-off-by: Fainelli <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
2010-03-16leds: led-class.c - Quiet boot messagesH Hartley Sweeten1-1/+1
As each led device gets registered a kernel message gets printed. In an embedded system with a number of leds this can produce a lot of output that just looks like noise. Change the message type to KERN_DEBUG since it might be useful in the dmesg output "after" booting. Signed-off-by: H Hartley Sweeten <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
2009-12-15tree-wide: convert open calls to remove spaces to skip_spaces() lib functionAndré Goddard Rosa1-1/+1
Makes use of skip_spaces() defined in lib/string.c for removing leading spaces from strings all over the tree. It decreases lib.a code size by 47 bytes and reuses the function tree-wide: text data bss dec hex filename 64688 584 592 65864 10148 (TOTALS-BEFORE) 64641 584 592 65817 10119 (TOTALS-AFTER) Also, while at it, if we see (*str && isspace(*str)), we can be sure to remove the first condition (*str) as the second one (isspace(*str)) also evaluates to 0 whenever *str == 0, making it redundant. In other words, "a char equals zero is never a space". Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below, and found occurrences of this pattern on 3 more files: drivers/leds/led-class.c drivers/leds/ledtrig-timer.c drivers/video/output.c @@ expression str; @@ ( // ignore skip_spaces cases while (*str && isspace(*str)) { \(str++;\|++str;\) } | - *str && isspace(*str) ) Signed-off-by: André Goddard Rosa <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Jeff Dike <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Neil Brown <[email protected]> Cc: Kyle McMartin <[email protected]> Cc: Henrique de Moraes Holschuh <[email protected]> Cc: David Howells <[email protected]> Cc: <[email protected]> Cc: Samuel Ortiz <[email protected]> Cc: Patrick McHardy <[email protected]> Cc: Takashi Iwai <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2009-04-06leds: allow led-drivers to use a variable range of brightness valuesGuennadi Liakhovetski1-1/+20
This patch allows drivers to override the default maximum brightness value of 255. We take care to preserve backwards-compatibility as much as possible, so that user-space ABI doesn't change for existing drivers. LED trigger code has also been updated to use the per-LED maximum. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
2009-01-08leds: Add suspend/resume to the core classRichard Purdie1-0/+22
Add suspend/resume to the core class and remove all the now unneeded code from various drivers. Originally the class code couldn't support suspend/resume but since class_device can there is no reason for each driver doing its own suspend/resume anymore.
2009-01-08leds: Fixup kdoc comment to match parameter namesSven Wegener1-1/+1
Signed-off-by: Sven Wegener <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
2008-10-20leds: Fix trigger registration raceRichard Purdie1-2/+3
Fix a race during trigger registration where we could try and use a lock before it was initialised. Signed-off-by: Richard Purdie <[email protected]>
2008-10-20leds: Fix leds-class.c commentQinghuang Feng1-1/+1
led_classdev_unregister() has no "__" prefix, remove it. Signed-off-by: Qinghuang Feng <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
2008-10-20leds: Remove uneeded strlen callsSven Wegener1-4/+1
There's no need for the additional call to strlen(), we can directly return the value returned by sprintf(). We now return a length value that doesn't include the final '\0', but user space shouldn't bother about it anyway. Signed-off-by: Sven Wegener <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
2008-10-16device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman1-2/+2
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2008-05-20LEDS: fix race in device_createGreg Kroah-Hartman1-4/+2
There is a race from when a device is created with device_create() and then the drvdata is set with a call to dev_set_drvdata() in which a sysfs file could be open, yet the drvdata will be NULL, causing all sorts of bad things to happen. This patch fixes the problem by using the new function, device_create_drvdata(). Cc: Kay Sievers <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2008-04-29Remove duplicated unlikely() in IS_ERR()Hirofumi Nakagawa1-1/+1
Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless code. Signed-off-by: Hirofumi Nakagawa <[email protected]> Acked-by: David S. Miller <[email protected]> Acked-by: Jeff Garzik <[email protected]> Cc: Paul Clements <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: David Brownell <[email protected]> Cc: James Bottomley <[email protected]> Cc: Michael Halcrow <[email protected]> Cc: Anton Altaparmakov <[email protected]> Cc: Al Viro <[email protected]> Cc: Carsten Otte <[email protected]> Cc: Patrick McHardy <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Acked-by: Mike Frysinger <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-04-24leds: Add support to leds with readable statusHenrique de Moraes Holschuh1-0/+9
Some led hardware allows drivers to query the led state, and this patch adds a hook to let the led class take advantage of that information when available. Without this functionality, when access to the led hardware is not exclusive (i.e. firmware or hardware might change its state behind the kernel's back), reality goes out of sync with the led class' idea of what the led is doing, which is annoying at best. Behaviour for drivers that do not or cannot read the led status is unchanged. Signed-off-by: Henrique de Moraes Holschuh <[email protected]> Signed-off-by: Richard Purdie <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.