aboutsummaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2020-09-17Merge remote-tracking branch 'origin/irq/gic-retrigger' into irq/irqchip-nextMarc Zyngier3-2/+28
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/ipi-as-irq' into irq/irqchip-nextMarc Zyngier6-312/+548
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/gic-v3-nmi-ns' into irq/irqchip-nextMarc Zyngier1-14/+46
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/dev_err_probe' into irq/irqchip-nextMarc Zyngier4-26/+12
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17Merge remote-tracking branch 'origin/irq/misc-5.10' into irq/irqchip-nextMarc Zyngier1-2/+2
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Cleanup Franken-GIC handlingMarc Zyngier1-29/+12
Introduce a static key identifying Samsung's unique creation, allowing to replace the indirect call to compute the base addresses with a simple test on the static key. Faster, cheaper, negative diffstat. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Provide mask/unmask dummy methods for IPIsMarc Zyngier1-0/+2
Although it doesn't seem possible to disable individual mailbox interrupts, we still need to provide some callbacks. Fixes: 09eb672ce4fb ("irqchip/bcm2836: Configure mailbox interrupts as standard interrupts") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/armada-370-xp: Configure IPIs as standard interruptsMarc Zyngier1-84/+178
To introduce IPIs as standard interrupts to the Armada 370-XP driver, let's allocate a completely separate irqdomain and irqchip combo that lives parallel to the "standard" one. This effectively should be modelled as a chained interrupt controller, but the code is in such a state that it is pretty hard to shoehorn, as it would require the rewrite of the MSI layer as well. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/hip04: Configure IPIs as standard interruptsMarc Zyngier1-49/+40
In order to switch the hip04 driver to provide standard interrupts for IPIs, rework the way interrupts are allocated, making sure the irqdomain covers the SGIs as well as the rest of the interrupt range. The driver is otherwise so old-school that it creates all interrupts upfront (duh!), so there is hardly anything else to change, apart from communicating the IPIs to the arch code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/bcm2836: Configure mailbox interrupts as standard interruptsMarc Zyngier1-26/+125
In order to switch the bcm2836 driver to privide standard interrupts for IPIs, it first needs to stop lying about the way things work. The mailbox interrupt is actually a multiplexer, with enough bits to store 32 pending interrupts per CPU. So let's turn it into a chained irqchip. Once this is done, we can instanciate the corresponding IPIs, and pass them to the architecture code. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic-common: Don't enable SGIs by defaultMarc Zyngier1-3/+0
The architecture code now enables the IPIs as required, so no need to enable SGIs by default in the GIC code. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Configure SGIs as standard interruptsMarc Zyngier1-41/+87
Change the way we deal with GIC SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic: Refactor SMP configurationMarc Zyngier1-36/+40
As we are about to change quite a lot of the SMP support code, let's start by moving it around so that it minimizes the amount of #ifdefery. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/gic-v3: Configure SGIs as standard interruptsMarc Zyngier1-43/+51
Change the way we deal with GICv3 SGIs by turning them into proper IRQs, and calling into the arch code to register the interrupt range instead of a callback. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip: Add sl28cpld interrupt controller supportMichael Walle3-0/+105
Add support for the interrupt controller inside the sl28 CPLD management controller. The interrupt controller can handle at most 8 interrupts and is really simplistic and consists only of an interrupt mask and an interrupt pending register. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCsSuman Anna2-1/+10
The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP, commonly called ICSSG. The PRUSS INTC present within the ICSSG supports more System Events (160 vs 64), more Interrupt Channels and Host Interrupts (20 vs 10) compared to the previous generation PRUSS INTC instances. The first 2 and the last 10 of these host interrupt lines are used by the PRU and other auxiliary cores and sub-modules within the ICSSG, with 8 host interrupts connected to MPU. The host interrupts 5, 6, 7 are also connected to the other ICSSG instances within the SoC and can be partitioned as per system integration through the board dts files. Enhance the PRUSS INTC driver to add support for this ICSSG INTC instance. Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Implement irq_{get, set}_irqchip_state opsDavid Lechner1-0/+40
This implements the irq_get_irqchip_state and irq_set_irqchip_state callbacks for the TI PRUSS INTC driver. The set callback can be used by drivers to "kick" a PRU by injecting a PRU system event. Co-developed-by: Suman Anna <s-anna@ti.com> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Reviewed-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Add logic for handling reserved interruptsSuman Anna1-5/+24
The PRUSS INTC has a fixed number of output interrupt lines that are connected to a number of processors or other PRUSS instances or other devices (like DMA) on the SoC. The output interrupt lines 2 through 9 are usually connected to the main Arm host processor and are referred to as host interrupts 0 through 7 from ARM/MPU perspective. All of these 8 host interrupts are not always exclusively connected to the Arm interrupt controller. Some SoCs have some interrupt lines not connected to the Arm interrupt controller at all, while a few others have the interrupt lines connected to multiple processors in which they need to be partitioned as per SoC integration needs. For example, AM437x and 66AK2G SoCs have 2 PRUSS instances each and have the host interrupt 5 connected to the other PRUSS, while AM335x has host interrupt 0 shared between MPU and TSC_ADC and host interrupts 6 & 7 shared between MPU and a DMA controller. Add logic to the PRUSS INTC driver to ignore both these shared and invalid interrupts. Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interruptsGrzegorz Jaszczyk3-0/+607
The Programmable Real-Time Unit Subsystem (PRUSS) contains a local interrupt controller (INTC) that can handle various system input events and post interrupts back to the device-level initiators. The INTC can support upto 64 input events with individual control configuration and hardware prioritization. These events are mapped onto 10 output interrupt lines through two levels of many-to-one mapping support. Different interrupt lines are routed to the individual PRU cores or to the host CPU, or to other devices on the SoC. Some of these events are sourced from peripherals or other sub-modules within that PRUSS, while a few others are sourced from SoC-level peripherals/devices. The PRUSS INTC platform driver manages this PRUSS interrupt controller and implements an irqchip driver to provide a Linux standard way for the PRU client users to enable/disable/ack/re-trigger a PRUSS system event. The system events to interrupt channels and output interrupts relies on the mapping configuration provided either through the PRU firmware blob (for interrupts routed to PRU cores) or via the PRU application's device tree node (for interrupt routed to the main CPU). In the first case the mappings will be programmed on PRU remoteproc driver demand (via irq_create_fwspec_mapping) during the boot of a PRU core and cleaned up after the PRU core is stopped. Reference counting is used to allow multiple system events to share a single channel and to allow multiple channels to share a single host event. The PRUSS INTC module is reference counted during the interrupt setup phase through the irqchip's irq_request_resources() and irq_release_resources() ops. This restricts the module from being removed as long as there are active interrupt users. The driver currently supports and can be built for OMAP architecture based AM335x, AM437x and AM57xx SoCs; Keystone2 architecture based 66AK2G SoCs and Davinci architecture based OMAP-L13x/AM18x/DA850 SoCs. All of these SoCs support 64 system events, 10 interrupt channels and 10 output interrupt lines per PRUSS INTC with a few SoC integration differences. NOTE: Each PRU-ICSS's INTC on AM57xx SoCs is preceded by a Crossbar that enables multiple external events to be routed to a specific number of input interrupt events. Any non-default external interrupt event directed towards PRUSS needs this crossbar to be setup properly. Co-developed-by: Suman Anna <s-anna@ti.com> Co-developed-by: Andrew F. Davis <afd@ti.com> Co-developed-by: Roger Quadros <rogerq@ti.com> Co-developed-by: David Lechner <david@lechnology.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson2-1331/+0
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-13irqchip: Kconfig: Update description for RENESAS_IRQC configLad Prabhakar1-2/+2
irq-renesas-irqc driver is also used on Renesas RZ/G{1,2} SoC's, update the same to reflect the description for RENESAS_IRQC config. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200911100439.19878-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2020-09-13irqchip/gic-v3: Support pseudo-NMIs when SCR_EL3.FIQ == 0Alexandru Elisei1-12/+44
The GIC's internal view of the priority mask register and the assigned interrupt priorities are based on whether GIC security is enabled and whether firmware routes Group 0 interrupts to EL3. At the moment, we support priority masking when ICC_PMR_EL1 and interrupt priorities are either both modified by the GIC, or both left unchanged. Trusted Firmware-A's default interrupt routing model allows Group 0 interrupts to be delivered to the non-secure world (SCR_EL3.FIQ == 0). Unfortunately, this is precisely the case that the GIC driver doesn't support: ICC_PMR_EL1 remains unchanged, but the GIC's view of interrupt priorities is different from the software programmed values. Support pseudo-NMIs when SCR_EL3.FIQ == 0 by using a different value to mask regular interrupts. All the other values remain the same. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200912153707.667731-3-alexandru.elisei@arm.com
2020-09-13irqchip/gic-v3: Spell out when pseudo-NMIs are enabledAlexandru Elisei1-2/+2
When NMIs cannot be enabled, the driver prints a message stating that unambiguously. When they are enabled, the only feedback we get is a message regarding the use of synchronization for ICC_PMR_EL1 writes, which is not as useful for a user who is not intimately familiar with how NMIs are implemented. Let's make it obvious that pseudo-NMIs are enabled. Keep the message about using a barrier for ICC_PMR_EL1 writes, because it has a non-negligible impact on performance. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200912153707.667731-2-alexandru.elisei@arm.com
2020-09-13irqchip/imx-irqsteer: Use dev_err_probe() to simplify error handlingAnson Huang1-6/+3
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1597126576-18383-2-git-send-email-Anson.Huang@nxp.com
2020-09-13irqchip/imx-intmux: Use dev_err_probe() to simplify error handlingAnson Huang1-6/+3
dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1597126576-18383-1-git-send-email-Anson.Huang@nxp.com
2020-09-13irqchip/ti-sci: Simplify with dev_err_probe()Krzysztof Kozlowski2-14/+6
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. There is also no need to assign NULL to 'intr->sci' as it is part of devm-allocated memory. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200902174615.24695-1-krzk@kernel.org
2020-09-13irqchip/gic-v3: Describe the SGI rangeMarc Zyngier1-3/+15
As we are about to start making use of SGIs in a more conventional way, let's describe it is the GICv3 list of interrupt types. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-13irqchip/loongson-htvec: Fix initial interrupt clearingHuacai Chen1-2/+2
In htvec_reset() only the first group of initial interrupts is cleared. This sometimes causes spurious interrupts, so let's clear all groups. While at it, fix the nearby comment that to match the reality of what the driver does. Fixes: 818e915fbac518e8c78e1877 ("irqchip: Add Loongson HyperTransport Vector support") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1599819978-13999-2-git-send-email-chenhc@lemote.com
2020-09-13irqchip/ti-sci-intr: Fix unsigned comparison to zeroYueHaibing1-2/+2
ti_sci_intr_xlate_irq() return -ENOENT on fail, p_hwirq should be int type. Fixes: a5b659bd4bc7 ("irqchip/ti-sci-intr: Add support for INTR being a parent to INTR") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20200826035321.18620-1-yuehaibing@huawei.com
2020-09-13irqchip/ti-sci-inta: Fix unsigned comparison to zeroYueHaibing1-2/+2
ti_sci_inta_xlate_irq() return -ENOENT on fail, p_hwirq should be int type. Fixes: 5c4b585d2910 ("irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20200826035430.21060-1-yuehaibing@huawei.com
2020-09-06irqchip/gic-v2, v3: Prevent SW resends entirelyValentin Schneider2-2/+9
The GIC irqchips can now use a HW resend when a retrigger is invoked by check_irq_resend(). However, should the HW resend fail, check_irq_resend() will still attempt to trigger a SW resend, which is still a bad idea for the GICs. Prevent this from happening by setting IRQD_HANDLE_ENFORCE_IRQCTX on all GIC IRQs. Technically per-cpu IRQs do not need this, as their flow handlers never set IRQS_PENDING, but this aligns all IRQs wrt context enforcement: this also forces all GIC IRQ handling to happen in IRQ context (as defined by in_irq()). Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-3-valentin.schneider@arm.com
2020-09-06irqchip/git-v3-its: Implement irq_retrigger callback for device-triggered LPIsMarc Zyngier1-0/+6
It is pretty easy to provide a retrigger callback for the ITS, as it we already have the required support in terms of irq_set_irqchip_state(). Note that this only works for device-generated LPIs, and not the GICv4 doorbells, which should never have to be retriggered anyway. Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-06irqchip/gic-v2, v3: Implement irq_chip->irq_retrigger()Valentin Schneider2-0/+13
While digging around IRQCHIP_EOI_IF_HANDLED and irq/resend.c, it has come to my attention that the IRQ resend situation seems a bit precarious for the GIC(s). When marking an IRQ with IRQS_PENDING, handle_fasteoi_irq() will bail out and issue an irq_eoi(). Should the IRQ in question be re-enabled, check_irq_resend() will trigger a SW resend, which will go through the flow handler again and issue *another* irq_eoi() on the *same* IRQ activation. This is something the GIC spec clearly describes as a bad idea: any EOI must match a previous ACK. Implement irq_chip.irq_retrigger() for the GIC chips by setting the GIC pending bit of the relevant IRQ. After being called by check_irq_resend(), this will eventually trigger a *new* interrupt which we will handle as usual. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200730170321.31228-2-valentin.schneider@arm.com
2020-08-30Merge tag 'irq-urgent-2020-08-30' of ↵Linus Torvalds9-93/+190
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Revert the platform driver conversion of interrupt chip drivers as it turned out to create more problems than it solves. - Fix a trivial typo in the new module helpers which made probing reliably fail. - Small fixes in the STM32 and MIPS Ingenic drivers - The TI firmware rework which had badly managed dependencies and had to wait post rc1" * tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Leave parent IRQ unmasked on suspend irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers arm64: dts: k3-am65: Update the RM resource types arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent. irqchip/ti-sci-intr: Add support for INTR being a parent to INTR dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent firmware: ti_sci: Add support for getting resource with subtype firmware: ti_sci: Drop unused structure ti_sci_rm_type_map firmware: ti_sci: Drop the device id to resource type translation
2020-08-25irqchip/ingenic: Leave parent IRQ unmasked on suspendPaul Cercueil1-1/+1
All the wakeup sources we possibly want will go through the interrupt controller, so the parent IRQ must not be masked during suspend, or there won't be any way to wake up the system. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200819180602.136969-1-paul@crapouillou.net
2020-08-25irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by ↵qiuguorui11-2/+12
mistake In the current code, when the eoi callback of the exti clears the pending bit of the current interrupt, it will first read the values of fpr and rpr, then logically OR the corresponding bit of the interrupt number, and finally write back to fpr and rpr. We found through experiments that if two exti interrupts, we call them int1/int2, arrive almost at the same time. in our scenario, the time difference is 30 microseconds, assuming int1 is triggered first. there will be an extreme scenario: both int's pending bit are set to 1, the irq handle of int1 is executed first, and eoi handle is then executed, at this moment, all pending bits are cleared, but the int 2 has not finally been reported to the cpu yet, which eventually lost int2. According to stm32's TRM description about rpr and fpr: Writing a 1 to this bit will trigger a rising edge event on event x, Writing 0 has no effect. Therefore, when clearing the pending bit, we only need to clear the pending bit of the irq. Fixes: 927abfc4461e7 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # v4.18+ Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com
2020-08-25irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER ↵Marc Zyngier4-14/+4
helperse It has become obvious that switching a number of irqchip drivers to being platform drivers without considering the platform was a mistake. We have multiple reports of end-point drivers not probing because the irqchip driver isn't there yet, breaking the expectations of the users. This patch reverts: 920ecb8c35cb ("irqchip/mtk-cirq: Convert to a platform driver") f97dbf48ca43 ("irqchip/mtk-sysirq: Convert to a platform driver") 5be57099d445 ("irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros") 95bf9305d2e3 ("irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module") and leave QCOM PDC, MTK sysrq and cirq drivers as built-in, special purpose drivers for the time being until we have worked out a better solution. Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reported-by: Frank Wunderlich <linux@fw-web.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/93debe6a0308b66d3f307af67ba7ec2c@kernel.org
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva5-9/+9
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-19ARM: s3c24xx: move irqchip driver back into platformArnd Bergmann2-1331/+0
It was a good idea to move it out at first, but the irqchip code is still tightly connected to the s3c24xx platform code and uses multiple internal header files, so just move it back for the time being to avoid those dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-21-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-17irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpersMarc Zyngier1-1/+1
When probing an interrupt controller that is behind a parent, we try to check whether the parent domain is available as an indication that we can actually try to probe. Unfortunately, we are checking this with the firmware node of the about to be probed device, not the parent. This is obviously bound to fail. Instead, use the parent node. Fixes: f8410e626569 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros") Reported-by: John Stultz <john.stultz@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-08-16irqchip/ti-sci-inta: Add support for INTA directly connecting to GICLokesh Vutla1-13/+74
Driver assumes that Interrupt parent to Interrupt Aggregator is always Interrupt router. This is not true always and GIC can be a parent to Interrupt Aggregator. Update the driver to detect the parent and request the parent irqs accordingly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200806074826.24607-11-lokeshvutla@ti.com
2020-08-16irqchip/ti-sci-inta: Do not store TISCI device id in platform device id fieldLokesh Vutla1-7/+9
Even though DT doesn't make active use of id field in platform_device, we cannot hijack it to store TISCI device id. So create a field in struct ti_sci_inta for storing TISCI id and drop usage of id field in platform_device. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200806074826.24607-10-lokeshvutla@ti.com
2020-08-16irqchip/ti-sci-intr: Add support for INTR being a parent to INTRLokesh Vutla1-59/+93
Driver assumes that Interrupt parent to Interrupt router is always GIC. This is not true always and an Interrupt Router can be a parent to Interrupt Router. Update the driver to detect the parent and request the parent irqs accordingly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200806074826.24607-7-lokeshvutla@ti.com
2020-08-04Merge tag 'irq-core-2020-08-04' of ↵Linus Torvalds23-181/+291
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual boring updates from the interrupt subsystem: - Infrastructure to allow building irqchip drivers as modules - Consolidation of irqchip ACPI probing - Removal of the EOI-preflow interrupt handler which was required for SPARC support and became obsolete after SPARC was converted to use sparse interrupts. - Cleanups, fixes and improvements all over the place" * tag 'irq-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) irqchip/loongson-pch-pic: Fix the misused irq flow handler irqchip/loongson-htvec: Support 8 groups of HT vectors irqchip/loongson-liointc: Fix misuse of gc->mask_cache dt-bindings: interrupt-controller: Update Loongson HTVEC description irqchip/imx-intmux: Fix irqdata regs save in imx_intmux_runtime_suspend() irqchip/imx-intmux: Implement intmux runtime power management irqchip/gic-v4.1: Use GFP_ATOMIC flag in allocate_vpe_l1_table() irqchip: Fix IRQCHIP_PLATFORM_DRIVER_* compilation by including module.h irqchip/stm32-exti: Map direct event to irq parent irqchip/mtk-cirq: Convert to a platform driver irqchip/mtk-sysirq: Convert to a platform driver irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros irqchip: irq-bcm2836.h: drop a duplicated word irqchip/gic-v4.1: Ensure accessing the correct RD when writing INVALLR irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map irqchip/gic-v3: Remove unused register definition irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module genirq: Export irq_chip_retrigger_hierarchy and irq_chip_set_vcpu_affinity_parent irqdomain: Export irq_domain_update_bus_token ...
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-08-03Merge tag 'irq-urgent-2020-08-02' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Fix a recent IRQ affinities regression, add in a missing debugfs printout that helps the debugging of IRQ affinity logic bugs, and fix a memory leak" * tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/debugfs: Add missing irqchip flags genirq/affinity: Make affinity setting if activated opt-in irqdomain/treewide: Free firmware node after domain removal
2020-08-03Merge tag 'arm64-upstream' of ↵Linus Torvalds1-19/+86
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 and cross-arch updates from Catalin Marinas: "Here's a slightly wider-spread set of updates for 5.9. Going outside the usual arch/arm64/ area is the removal of read_barrier_depends() series from Will and the MSI/IOMMU ID translation series from Lorenzo. The notable arm64 updates include ARMv8.4 TLBI range operations and translation level hint, time namespace support, and perf. Summary: - Removal of the tremendously unpopular read_barrier_depends() barrier, which is a NOP on all architectures apart from Alpha, in favour of allowing architectures to override READ_ONCE() and do whatever dance they need to do to ensure address dependencies provide LOAD -> LOAD/STORE ordering. This work also offers a potential solution if compilers are shown to convert LOAD -> LOAD address dependencies into control dependencies (e.g. under LTO), as weakly ordered architectures will effectively be able to upgrade READ_ONCE() to smp_load_acquire(). The latter case is not used yet, but will be discussed further at LPC. - Make the MSI/IOMMU input/output ID translation PCI agnostic, augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID bus-specific parameter and apply the resulting changes to the device ID space provided by the Freescale FSL bus. - arm64 support for TLBI range operations and translation table level hints (part of the ARMv8.4 architecture version). - Time namespace support for arm64. - Export the virtual and physical address sizes in vmcoreinfo for makedumpfile and crash utilities. - CPU feature handling cleanups and checks for programmer errors (overlapping bit-fields). - ACPI updates for arm64: disallow AML accesses to EFI code regions and kernel memory. - perf updates for arm64. - Miscellaneous fixes and cleanups, most notably PLT counting optimisation for module loading, recordmcount fix to ignore relocations other than R_AARCH64_CALL26, CMA areas reserved for gigantic pages on 16K and 64K configurations. - Trivial typos, duplicate words" Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits) arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack arm64/mm: save memory access in check_and_switch_context() fast switch path arm64: sigcontext.h: delete duplicated word arm64: ptrace.h: delete duplicated word arm64: pgtable-hwdef.h: delete duplicated words bus: fsl-mc: Add ACPI support for fsl-mc bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver of/irq: Make of_msi_map_rid() PCI bus agnostic of/irq: make of_msi_map_get_device_domain() bus agnostic dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus of/device: Add input id to of_dma_configure() of/iommu: Make of_map_rid() PCI agnostic ACPI/IORT: Add an input ID to acpi_dma_configure() ACPI/IORT: Remove useless PCI bus walk ACPI/IORT: Make iort_msi_map_rid() PCI agnostic ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC arm64: enable time namespace support arm64/vdso: Restrict splitting VVAR VMA arm64/vdso: Handle faults on timens page ...
2020-07-30irqchip/loongson-pch-pic: Fix the misused irq flow handlerHuacai Chen1-11/+4
Loongson PCH PIC is a standard level triggered PIC, and it need to clear interrupt during unmask. Fixes: ef8c01eb64ca6719da449dab0 ("irqchip: Add Loongson PCH PIC controller") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://lore.kernel.org/r/1596099090-23516-6-git-send-email-chenhc@lemote.com
2020-07-30irqchip/loongson-htvec: Support 8 groups of HT vectorsHuacai Chen1-12/+10
The original version can only used by old Loongson-3 which only use 4 groups of HT vectors. Now Loongson-3A R4 can use 8 groups, so improve the driver to support all 8 groups. Fixes: 818e915fbac518e8c78e1877a ("irqchip: Add Loongson HyperTransport Vector support") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://lore.kernel.org/r/1596099090-23516-5-git-send-email-chenhc@lemote.com
2020-07-30irqchip/loongson-liointc: Fix misuse of gc->mask_cacheHuacai Chen1-5/+5
In gc->mask_cache bits, 1 means enabled and 0 means disabled, but in the loongson-liointc driver mask_cache is misused by reverting its meaning. This patch fix the bug and update the comments as well. Fixes: dbb152267908c4b2c3639492a ("irqchip: Add driver for Loongson I/O Local Interrupt Controller") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1596099090-23516-4-git-send-email-chenhc@lemote.com
Powered by cgit, Gruvboxed by Blaster4385.