aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2009-01-06Input: i8042 - add Dell Vostro 1510 to nomux listJiri Kosina1-0/+7
Dell Vostro needs 'nomux' quirk, otherwise the touchpad misbehaves. Reported-by: Robert Kiwanuka <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds4-7/+7
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-30Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimers: fix warning in kernel/hrtimer.c x86: make sure we really have an hpet mapping before using it x86: enable HPET on Fujitsu u9200 linux/timex.h: cleanup for userspace posix-timers: simplify de_thread()->exit_itimers() path posix-timers: check ->it_signal instead of ->it_pid to validate the timer posix-timers: use "struct pid*" instead of "struct task_struct*" nohz: suppress needless timer reprogramming clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI nohz: no softirq pending warnings for offline cpus hrtimer: removing all ur callback modes, fix hrtimer: removing all ur callback modes, fix hotplug hrtimer: removing all ur callback modes x86: correct link to HPET timer specification rtc-cmos: export second NVRAM bank Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c manually.
2008-12-30Input: gtco - use USB endpoint APIJulia Lawall1-1/+1
Use usb_endpoint_xfer_int(epd) instead of open-conding the check. Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-30Input: add support for Maple controller as a joystickAdrian McMenamin3-0/+206
Add support for the SEGA Dreamcast Maple controller as a joystick Signed-off-by: Adrian McMenamin <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-30Input: atkbd - broaden the Dell DMI signaturesMatthew Garrett1-0/+9
Some Dells need the dell input quirk applied but have a different vendor string in their DMI tables. Add an extra entry to cover these machines as well. Signed-off-by: Matthew Garrett <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-30Input: HIL drivers - add MODULE_ALIAS()Helge Deller3-1/+3
Add MODULE_ALIAS() to the HIL keyboard (hil_kbd.c) and HIL mouse (hil_ptr.c) drivers to make kernel module autoloader functional. Report HIL port number ID in serio id.id field. Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-29Input: add support for enhanced rotary controller on pxa930 and pxa935Yong Yao3-0/+222
Signed-off-by: Yong Yao <[email protected]> Signed-off-by: Eric Miao <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-29Input: add support for trackball on pxa930 and pxa935Yong Yao3-13/+289
Signed-off-by: Yong Yao <[email protected]> Signed-off-by: Eric Miao <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-25Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', ↵Ingo Molnar1-2/+2
'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core
2008-12-23Input: add da9034 touchscreen supportEric Miao3-0/+398
Add support for the built-in touchscreen controller in DA9034 (aka Micco), usually found on platforms with xscale processors. Signed-off-by: Eric Miao <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-23Input: ads7846 - strict_strtoul takes unsigned longHarvey Harrison1-1/+1
Fix sparse warning introduced by: commit 160f1fef7e52e974489b3c70fbd4e094c06965c2 Input: convert drivers to use strict_strtoul() Signed-off-by: Harvey Harrison <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-22sh: sh_mobile keysc clock framework supportMagnus Damm1-5/+23
Add clock framework support to the sh_mobile keysc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2008-12-20Input: make some variables and functions staticRoel Kluin2-2/+2
Signed-off-by: Roel Kluin <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-20Input: add tsc2007 based touchscreen driverKwangwoo Lee3-0/+393
This drive has been tested on ARM9 based SoC - MV86XX. Signed-off-by: Kwangwoo Lee <[email protected]> Acked-by: Jean Delvare <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-20Input: psmouse - add module parameters to control OLPC touchpad delaysPaul Fox1-4/+28
The HPGK touchpad that is found on the XO driver has historically exhibitted eratic behaviour in various environments (very dry, very humid, etc) that can be worked around via some delays. This patch turns those delays into module parameters to make testing simpler. Signed-off-by: Paul Fox <[email protected]> Signed-off-by: Deepak Saxena <[email protected]> Acked-By: Andres Salomon <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-20Input: i8042 - add Gigabyte M912 netbook to noloop exception tableOzan Çağlayan1-0/+8
Gigabyte M912's touchpad needs i8042.noloop for working. Signed-off-by: Ozan Çağlayan <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-20Input: atkbd - Samsung NC10 key repeat fixStuart Hopkins1-0/+25
This patch fixes the key repeat issue with the Fn+F? keys on the new Samsung NC10 Netbook, so that the keys can be defined and used within ACPID correctly, otherwise the keys repeat indefinately. This solves part of http://bugzilla.kernel.org/show_bug.cgi?id=12021 Signed-off-by: Stuart Hopkins <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-20Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptopRikard Ljungstrand1-0/+26
Add quirk for misbehaving volume buttons on HP Pavilion ZV6100 laptop which are not sending keyrelease events, as reported by Aaron Pickett. Signed-off-by: Rikard Ljungstrand <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-12-20Merge commit 'v2.6.28-rc9' into nextDmitry Torokhov16-75/+440
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-13Merge git://git.marvell.com/orion into develRussell King11-58/+440
2008-12-10ARM: OMAP: use gpio_to_irqDavid Brownell1-4/+4
Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead. Calls used for table initialization are left alone, at least this time around. (This patch is for code in both the OMAP tree and mainline.) Signed-off-by: David Brownell <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2008-12-02Merge branch 'for-rmk' of ↵Russell King1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c
2008-12-02[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.hEric Miao1-1/+1
The optimal change would be to move the AC97 register definitions into the AC97 driver, unfortunately, the registers are shared between several files. Move them into a dedicated regs-ac97.h first. Signed-off-by: Eric Miao <[email protected]>
2008-11-30Merge branch 'for-linus' of ↵Linus Torvalds9-53/+434
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add support for new USB Tablet PCs Input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback Input: i8042 - add Compal Hel80 laptop to nomux blacklist Input: cm109 - add keymap for ATCom AU-100 phone Input: fix the example of an input device driver Input: psmouse - fix incorrect validate_byte check in OLPC protocol Input: atkbd - cancel delayed work before freeing its structure Input: atkbd - add keymap quirk for Inventec Symphony systems Input: i8042 - add Dell XPS M1530 to nomux list Input: elo - fix format string in elo driver
2008-11-30input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playbackArjan van de Ven1-2/+3
ml_ff_playback() uses spin_(un)lock_bh. However this function is called with interrupts disabled from erase_effect() in drivers/input/ff-core.c:196. This is not permitted, and will result in a WARN_ON in the bottom half handling code. This patch changes this function to just use spin_lock_irqsave() instead, solving the problem and simplifying the locking logic. This was reported as entry #106559 in kerneloops.org Reported-by: kerneloops.org Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-11-30get xenbus_driver ->probe() "recognized" by modpostAl Viro1-3/+3
... by giving the instances' names magic suffix recognized by modpost ;-/ Their ->probe() is __devinit Signed-off-by: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-11-27Merge branch 'clps7500' into develRussell King1-1/+1
Conflicts: arch/arm/Kconfig
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King1-1/+1
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <[email protected]>
2008-11-27[ARM] clps7500: remove supportRussell King1-1/+1
The CLPS7500 platform has not built since 2.6.22-git7 and there seems to be no interest in fixing it. So, remove the platform support. Signed-off-by: Russell King <[email protected]>
2008-11-26Input: wacom - add support for new USB Tablet PCsPing Cheng4-49/+356
Signed-off-by: Ping Cheng <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-25hrtimer: removing all ur callback modesPeter Zijlstra1-2/+2
Impact: cleanup, move all hrtimer processing into hardirq context This is an attempt at removing some of the hrtimer complexity by reducing the number of callback modes to 1. This means that all hrtimer callback functions will be ran from HARD-irq context. I went through all the 30 odd hrtimer callback functions in the kernel and saw only one that I'm not quite sure of, which is the one in net/can/bcm.c - hence I'm CC-ing the folks responsible for that code. Furthermore, the hrtimer core now calls callbacks directly with IRQs disabled in case you try to enqueue an expired timer. If this timer is a periodic timer (which should use hrtimer_forward() to advance its time) then it might be possible to end up in an inf. recursive loop due to the fact that hrtimer_forward() doesn't round up to the next timer granularity, and therefore keeps on calling the callback - obviously this needs a fix. Aside from that, this seems to compile and actually boot on my dual core test box - although I'm sure there are some bugs in, me not hitting any makes me certain :-) Signed-off-by: Peter Zijlstra <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2008-11-24Input: libps2 - handle 0xfc responses from devicesDmitry Torokhov1-4/+16
Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-24Input: add support for Wacom W8001 penabled serial touchscreenJaya Kumar3-0/+339
The Wacom W8001 sensor is a sensor device (uses electromagnetic resonance) and it is interfaced via its serial microcontroller to the host. Signed-off-by: Jaya Kumar <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-24Input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playbackArjan van de Ven1-2/+3
ml_ff_playback() uses spin_(un)lock_bh. However this function is called with interrupts disabled from erase_effect() in drivers/input/ff-core.c:196. This is not permitted, and will result in a WARN_ON in the bottom half handling code. This patch changes this function to just use spin_lock_irqsave() instead, solving the problem and simplifying the locking logic. This was reported as entry #106559 in kerneloops.org Reported-by: kerneloops.org Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-20Input: synaptics - report multi-taps only if supported by the devicePeter Hutterer1-6/+10
According to Section 2.4.4 of the Synaptics TouchPad Interfacing Guide, bit 2 specifies if multi-finger detection is provided by the touchpad. Thus, only set BTN_TOOL_DOUBLETAP and BTN_TOOL_TRIPLETAP if the device actually supports it. Signed-off-by: Peter Hutterer <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-19Input: add joystick driver for Walkera WK-0701 RC transmitterPeter Popovec3-0/+305
Signed-off-by: Peter Popovec <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-19Input: pcspkr - fix PIT lockup on some chipsetsZoltan Devai1-2/+2
There've been reports [1] about the sysem bell causing a hard lockup. My machine was affected as well: any speaker output hung the machine completely, nothing in the logs, no magic sysrq, etc., looked like a hardware problem. Had a closer look on the issue, and it turned out that the pcspkr module is responsible. The cause is the bad setup of Timer 2 in the i8253 controller, which probably hangs the whole PIT controller. Intel datasheets [2] state that the timer registers are in an undefined state after reset and they need to be programmed before enabling the timer. (And enabling without programming the frequency first doesn't make sense anyway). I don't know which chipsets are affected (if not all), it also depends on the BIOS whether it initializes the timer (e.g. to beep when you start the machine). The following patch solved the issue on my ICH6 notebook, couldn't test it with any others, but should be safe to apply. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/146151 https://bugs.launchpad.net/ubuntu/+bug/270790 http://ubuntuforums.org/showthread.php?t=227693 http://bugs.gentoo.org/show_bug.cgi?id=222583 https://bugzilla.redhat.com/show_bug.cgi?id=454225 [2] http://www.intel.com/assets/pdf/datasheet/252516.pdf http://www.intel.com/assets/pdf/datasheet/301473.pdf http://www.intel.com/design/chipsets/datashts/29065503.pdf Signed-off-by: Zoltan Devai <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-19Input: usbtouchscreen - fix TSC-10 DM USB controllers without EEPROMNuno Lucas1-3/+2
The usbtouchscreen module implements a driver for the TSC-10 DM USB touchscreen controllers, but assumes a 2-byte response for the CMD_RESET and CMD_RATE commands, when they can be only a single byte when no EEPROM is connected. The driver worked with an earlier controller revision, but new revisions of the controller fail. It seems the problem is that the early controller had the SEL4/EEPROM-CS pin high, but the new controller has it down, making the response different. Without the fix, the controller would answer the single byte 0x06 (ACK), making the init fail with -ENODEV because buf[1] is 0xFF (as initialized before). As the single byte is the only thing we need to check it was ok, there is no need to verify the second byte. The [0x15 0x01] case is the NAK [0x15] response for when there is no data in the EEPROM [bit-0 of second byte set], so I let that be, as I don't have any controller with an EEPROM. With this patch, both the earlier and latest controller work the same. Note: This was previously submited as BUG #11961 [1] on the bugzilla tracker, but rebased to version 2.6.27.4 and with unnecessary comments and printk's removed. [1] http://bugzilla.kernel.org/show_bug.cgi?id=11961 Signed-off-by: Nuno Lucas <[email protected]> Acked-by: Daniel Ritz <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-19Input: i8042 - add Compal Hel80 laptop to nomux blacklistDmitry Torokhov1-0/+7
Reported-by: Jaime Cura <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-11Input: cm109 - add keymap for ATCom AU-100 phoneDaniel Gimpelevich1-1/+36
Signed-off-by: Daniel Gimpelevich <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-11Input: psmouse - fix incorrect validate_byte check in OLPC protocolAndres Salomon1-1/+1
The validate_byte check logic was backwards; it should return true for an *invalid* packet. Thanks to Jeremy Katz for spotting this one. Signed-off-by: Andres Salomon <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-11Input: atkbd - cancel delayed work before freeing its structureJiri Pirko1-1/+1
Pointed out by Oleg Nesterov. Since delayed work is used here, use of flush_scheduled_work() is not sufficient in atkbd_disconnect(). It does not wait for scheduled delayed work to finish. This patch prevents delayed work to be processed after freeing atkbd structure (used struct delayed_work is part of atkbd) by cancelling this delayed work. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-11Input: atkbd - add keymap quirk for Inventec Symphony systemsMatthew Garrett1-0/+25
The Zepto 6615WD laptop (rebranded Inventec Symphony system) needs a key release quirk for its volume keys to work. The attached patch adds the quirk to the atkbd driver. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=460237 Signed-off-by: Matthew Garrett <[email protected]> Signed-off-by: Adel Gadllah <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-11Input: i8042 - add Dell XPS M1530 to nomux listHerton Ronaldo Krzesinski1-0/+7
Dell XPS M1530 needs i8042.nomux=1 for ALPS touchpad to work as reported on https://qa.mandriva.com/show_bug.cgi?id=43532 It is said that before A08 bios version this isn't needed (I don't have the hardware so can't check), and suppose this will not break with bios versions before A08. Signed-off-by: Herton Ronaldo Krzesinski <[email protected]> Tested-by: Andreas Ericsson <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-11-01saner FASYNC handling on file closeAl Viro5-17/+0
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2008-10-30Input: elo - fix format string in elo driverVojtech Pavlik1-1/+1
Fix typo in format string. Signed-off-by: Vojtech Pavlik <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-10-30Input: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers10-17/+15
Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kay Sievers <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2008-10-29Input: omap-keypad - allow more than 6 rowsPeter Ujfalusi1-1/+1
There is no reason to limit the GPIO rows to 6 for OMAP2. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.