| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.
The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.
The same issue exists on Dell Latitude 7370.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929
Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads")
Signed-off-by: Masaki Ota <[email protected]>
Tested-by: Aaron Ma <[email protected]>
Tested-by: Jonathan Liu <[email protected]>
Tested-by: Jaak Ristioja <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Signed-off-by: Helge Deller <[email protected]>
|
|
Adds support for a PDP Xbox One controller with device ID
(0x06ef:0x02a4). The Product string for this device is "PDP Wired
Controller for Xbox One - Stealth Series | Phantom Black".
Signed-off-by: Francis Therien <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
ALPS v3 and v7 packet formats reports trackstick pressure. This information
is already parsed in unused "z" variable.
ALPS SS4 S2 devices already reports trackstick pressure as ABS_PRESSURE
attribute, therefore reports pressure in the same way also for v3 and v7.
This patch also updates parsing v3 pressure information, it is also stored
in 7 bits.
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
This driver let you plug in your RC controller to the adapter and
use it as input device in various RC simulators.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().
input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:
if (input->users || usbtouch->type->irq_always)
result = usb_submit_urb(usbtouch->irq, GFP_NOIO);
The same URB will then be fail when resubmitted in usbtouch_open().
Introduce usbtouch->is_open to keep track of the state instead.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
usb_autopm_get_interface() that is called in usbtouch_open() does an
autoresume if the device is suspended.
input_dev->mutex used in usbtouch_resume() is in this case already
taken by the input subsystem and will cause a deadlock.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The blackfin architecture is getting removed, so this
one is obsolete as well.
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: Aaron Wu <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The blackfin architecture is getting removed, so this
driver is now obsolete.
Acked-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Acked-by: Kalle Valo <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().
input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:
if (pegasus->dev->users && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0)
retval = -EIO;
The same URB will then be fail when resubmitted in pegasus_open().
Introduce pegasus->is_open to keep track of the state instead.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
usb_autopm_get_interface() that is called in pegasus_open() does an
autoresume if the device is suspended.
input_dev->mutex used in pegasus_resume() is in this case already
taken by the input subsystem and will cause a deadlock.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().
input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:
if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
retval = -EIO;
}
The same URB will then be fail when resubmitted in synusb_open().
Introduce synusb->is_open to keep track of the state instead.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
usb_autopm_get_interface() that is called in synusb_open() does an
autoresume if the device is suspended.
input_dev->mutex used in synusb_resume() is in this case already
taken by the input subsystem and will cause a deadlock.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Merge various PS/2 handling improvements.
|
|
Add support for specifying event actions to trigger wakeup when using
the gpio-keys input device as a wakeup source.
This would allow the device to configure when to wakeup the system. For
example a gpio-keys input device for pen insert, may only want to wakeup
the system when ejecting the pen.
Suggested-by: Brian Norris <[email protected]>
Signed-off-by: Jeffy Chen <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
This commit add ACPI support for Chuwi Hi8 tablet. On the ACPI table of
the tablet, GSL1680 is registered as MSSL0001, so the driver does not
recognize the device. This commit resolve it.
Signed-off-by: Shohei Maruyama <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The analog joystick driver spits a warning at us:
drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer
not defined for this architecture.
PPC has get_cycles() so use that.
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Now that the MONOTONIC and BOOTTIME clocks are indentical, remove all the
special casing.
The user space visible interfaces still support both clocks, but their behavior
is identical.
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Kevin Easton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mark Salyzyn <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
In preparation to enabling -Wvla, remove VLA and replace it with a
fixed-length array instead.
Fixed as part of the directive to remove all VLAs from the kernel:
https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Remove the MN10300 arch as the hardware is defunct.
Suggested-by: Arnd Bergmann <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: Masahiro Yamada <[email protected]>
cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Reset i8042 before probing because of insufficient BIOS initialisation of
the i8042 serial controller. This makes Synaptics touchpad detection
possible. Without resetting the Synaptics touchpad is not detected because
there are always NACK messages from AUX port.
Signed-off-by: Dennis Wassenberg <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Add driver that properly handles input event emitted by RAVE SP
devices.
Reviewed-by: Lucas Stach <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Sync up with mainline to bring in RAVE MFD device core.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- we are reverting patch that was switched touchpad on Lenovo T460P
over to native RMI because on these boxes BIOS messes up with SMBus
controller state. We might re-enable it later once SMBus issue is
resolved
- disabling interrupts in matrix_keypad driver was racy
- mms114 now has SPDX header and matching MODULE_LICENSE
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
Input: matrix_keypad - fix race when disabling interrupts
Input: mms114 - add SPDX identifier
Input: mms114 - fix license module information
|
|
This reverts commit 48282969826b3d3c76e908182f69724d86d995fe which
caused the following issues:
1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working
after suspend-resume cycle. Due to strange state of the device another
suspend is impossible.
The following dmesg errors can be observed:
thinkpad_acpi: EC reports that Thermal Table has changed
rmi4_smbus 7-002c: failed to get SMBus version number!
rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16.
rmi4_f01 rmi4-00.fn01: Resume failed with code -16.
rmi4_physical rmi4-00: Failed to suspend functions: -16
rmi4_smbus 7-002c: Failed to resume device: -16
PM: resume devices took 0.640 seconds
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16).
rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
psmouse: probe of serio3 failed with error -1
2. On another T460p with BIOS version 2.15 two finger scrolling gesture
on the touchpad stops working after suspend-resume cycle (about 75%
reproducibility, when it still works, the scrolling gesture becomes
laggy). Nothing suspicious appears in the dmesg.
Analysis form Richard Schütz:
"RMI is unreliable on the ThinkPad T460p because the device is affected
by the firmware behavior addressed in a7ae81952cda ("i2c: i801: Allow
ACPI SystemIO OpRegion to conflict with PCI BAR")."
The affected devices often show:
i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited
Reported-by: Richard Schütz <[email protected]>
Signed-off-by: Arkadiusz Hiler <[email protected]>
Tested-by: Martin Peres <[email protected]>
Tested-by: Arkadiusz Hiler <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
This patch registers four standard control handlers using the corresponding
V4L2 framework.
Signed-off-by: Florian Echtler <[email protected]>
[[email protected]: lower-cased 0x0F and 0xF0]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
These functions provide write access to the internal LCD panel registers
which also control the sensor. They can be used to disable the
preprocessor, set the illumination brightness, and adjust gain/contrast
(which are stored together in one register internally called "vsvideo").
Signed-off-by: Florian Echtler <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch adds parameter definitions and module parameters for the four
userspace controls that the SUR40 can currently provide.
Signed-off-by: Florian Echtler <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The SUR40 can recognize specific printed patterns directly in hardware;
this information (i.e. the pattern id) is present but currently unused
in the blob structure.
Signed-off-by: Florian Echtler <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If matrix_keypad_stop() is executing and the keypad interrupt is triggered,
disable_row_irqs() may be called by both matrix_keypad_interrupt() and
matrix_keypad_stop() at the same time, causing interrupts to be disabled
twice and the keypad being "stuck" after resuming.
Take lock when setting keypad->stopped to ensure that ISR will not race
with matrix_keypad_stop() disabling interrupts.
Signed-off-by: Zhang Bo <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
input_mt_init_slots() may fail, we need to handle this condition.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Instead of manipulating capability bits directly, use
input_set_capability().
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
We do not need to call ps2_command() several times in a row, transmitting
every byte as it were a command byte, we can often pack it all in a single
command.
Also, now that ps2_command() handles retransmission, we do not need to do
it ourselves in trackpoint_power_on_reset().
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
When we probe PS/2 devices we first issue "Get ID" command and only if we
receive what we consider a valid keyboard or mouse ID we disable the device
and continue with protocol detection. That means that the device may be
transmitting motion or keystroke data, while we expect ACK response.
Instead of signaling failure if we see anything but ACK/NAK let's ignore
"garbage" response until we see ACK for the command byte (first byte). The
checks for subsequent ACKs of command parameters will continue be strict.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The devices are allowed to respond to either command byte or command
parameter with a NAK (0xfe), and the host is supposed to resend the
"correct" byte. The device then will either respond with ACK or ERR (0xfc).
Let's teach libps2 to handle the NAK responses properly, so that individual
drivers do not need to handle them.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Debugging via i8042.debug and analyzing raw PS/2 data stream may be
cumbersome as you need to locate the boundaries of commands, decipher the
sliced commands, etc, etc. Let's add a bit more high level debug statements
for ps2_sendbyte(), ps2_command(), and ps2_sliced_command().
We do not introduce a new module parameter, but rater rely on the kernel
having dynamic debug facility enabled (which most everyone has nowadays).
Enable with:
echo "file libps2.c +pf" > /sys/kernel/debug/dynamic_debug/control
or add "libps2.dyndbg=+pf" to the kernel command line.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
In preparation to adding some debugging statements to PS/2 control
sequences let's move psmouse_sliced_command() into libps2 and rename it
to ps2_sliced_command().
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Instead of using unsigned char for the byte data switch to using u8. Also
use unsigned int for the command codes and timeouts, and have
ps2_handle_ack() and ps2_handle_response() return bool instead of int, as
they do not return error codes but rather signal whether a byte was handled
or not handled. ps2_is_keyboard_id() now returns bool as well.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Individual labels of switch statements should have the same indentation
level as the switch statement itself.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
This Far-Eastern company's PS/2 mice use a deviant format for the data
relating to movement of the scroll wheels for, at least, their dual wheel
mice, such as their "Optical GreatEye Wheelmouse" model "WOP-35". This
product has five "buttons" (one of which is the click action on the first
wheel) and TWO scroll wheels. However for a byte comprising d0-d7 instead
of setting one of d6-7 in the forth byte of the mouse data packet and a
twos complement number of scroll steps in the remaining d5-d0 (or d3-d0
should there be a fourth (BTN_SIDE - d4) or fifth (BTN_EXTRA - d5) button
to report; they only report a single +/- event for each wheel and use a bit
pattern that corresponds to +/-1 for the first wheel and +/- 2 for the
second in the lower nibble of the fourth byte.
The effect with existing code is that the second mouse wheel merely repeats
the effect of the first but providing two steps per click rather than the
one of the first wheel - so there is no HORIZONTAL scroll wheel movement
detected from the device as far as the rest of the kernel sees it.
This patch, if enabled by the "a4tech_workaround" module parameter modifies
the handling just for mice of type PSMOUSE_IMEX so that the second scroll
wheel movement gets correctly reported as REL_HWHEEL events. Should this
module parameter be activated for other mice of the same PSMOUSE_IMEX type
then it is possible that at the point where the mouse reports more than a
single movement step the user may start seeing horizontal rather than
vertical wheel events, but should the movement steps get to be more than
two at a time the hack will get immediately deactivated and the behaviour
will revert to the past code.
This was discussed around *fifteen* *years* *ago* on the LKML and the best
summary is in post https://lkml.org/lkml/2002/7/18/111 "Re: PS2 Input Core
Support" by Vojtech Pavlik. I was not able to locate any discussion later
than this on this topic.
Given that most users of the "psmouse" module will NOT want this additional
feature enabled I have taken the apparently erroneous step of defaulting
the module parameter that enables it to be "disabled" - this functionality
may interfere with the operation of "normal" mice of this type (until a
large enough scroll wheel movement is detected) so I cannot see how it
would want to be enabled for "normal" users - i.e. everyone without this
brand of mouse.
I am using this patch at the moment and I can confirm that it is working
for me as both a module and compiled into the kernel for my mouse that is
of the type (WOP-35) described - I note that it is still available from
certain on-line retailers and that the manufacturers site does not list
GNU/Linux as being supported on the product page - this patch however does
enable full use of this product:
http://www.a4tech.com/product.asp?cid=3D1&scid=3D8&id=3D22
Signed-off-by: Stephen Lyons <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
- use u8 instead of unsigned char for byte data
- use input_set_capability() instead of manipulating capabilities bits
directly
- do not abuse -1 as error code, propagate errors from various calls.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
- switch to using BIT() macros
- use u8 instead of unsigned char for byte data
- use input_set_capability() instead of manipulating capabilities bits
directly
- use sign_extend32() when extracting wheel data.
- do not abuse -1 as error code, propagate errors from various calls.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
- switch to using BIT() macros
- use u8 instead of unsigned char for byte data
- use input_set_capability() instead of manipulating capabilities bits
directly
- use sign_extend32() when extracting wheel data.
- do not abuse -1 as error code, propagate errors from various calls.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Many protocol driver re-implement code to parse buttons or motion data from
the standard PS/2 protocol. Let's split the parsing into separate
functions and reuse them in protocol drivers.
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Replace the original license statement with the SPDX identifier.
Add also one line of description as recommended by the COPYING
file.
Signed-off-by: Andi Shyti <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The driver has been released with GNU Public License v2 as stated
in the header, but the module license information has been tagged
as "GPL" (GNU Public License v2 or later).
Fix the module license information so that it matches the one in
the header as "GPL v2".
Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Reported-by: Marcus Folkesson <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov:
- evdev interface has been adjusted to extend the life of timestamps on
32 bit systems to the year of 2108
- Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
improve chances of detecting trackpoints on the pass-through port
- mms114 touchcsreen controller driver has been updated to support
generic device properties and work with mms152 cntrollers
- Goodix driver now supports generic touchscreen properties
- couple of drivers for AVR32 architecture are gone as the architecture
support has been removed from the kernel
- gpio-tilt driver has been removed as there are no mainline users and
the driver itself is using legacy APIs and relies on platform data
- MODULE_LINECSE/MODULE_VERSION cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
Input: goodix - use generic touchscreen_properties
Input: mms114 - fix typo in definition
Input: mms114 - use BIT() macro instead of explicit shifting
Input: mms114 - replace mdelay with msleep
Input: mms114 - add support for mms152
Input: mms114 - drop platform data and use generic APIs
Input: mms114 - mark as direct input device
Input: mms114 - do not clobber interrupt trigger
Input: edt-ft5x06 - fix error handling for factory mode on non-M06
Input: stmfts - set IRQ_NOAUTOEN to the irq flag
Input: auo-pixcir-ts - delete an unnecessary return statement
Input: auo-pixcir-ts - remove custom log for a failed memory allocation
Input: da9052_tsi - remove unused mutex
Input: docs - use PROPERTY_ENTRY_U32() directly
Input: synaptics-rmi4 - log when we create a guest serio port
Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
Input: synaptics-rmi4 - do not delete interrupt memory too early
Input: ad7877 - use managed resource allocations
Input: stmfts,s6sy671 - add SPDX identifier
Input: remove atmel-wm97xx touchscreen driver
...
|