aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2024-05-28Input: elantech - fix touchpad state on resume for Lenovo N24Jonathan Denose1-0/+31
The Lenovo N24 on resume becomes stuck in a state where it sends incorrect packets, causing elantech_packet_check_v4 to fail. The only way for the device to resume sending the correct packets is for it to be disabled and then re-enabled. This change adds a dmi check to trigger this behavior on resume. Signed-off-by: Jonathan Denose <jdenose@google.com> Link: https://lore.kernel.org/r/20240503155020.v2.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-22Merge branch 'next' into for-linusDmitry Torokhov80-164/+314
Prepare input updates for 6.10 merge window.
2024-05-22Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719Joel Selvaraj1-0/+12
The driver is compatible with FocalTech FT5452 and FT8719 touchscreens too. FT5452 supports up to 5 touch points. FT8719 supports up to 10 touch points. Add compatible data for both of them. Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com> Link: https://lore.kernel.org/r/20240521-add-support-ft5452-and-ft8719-touchscreen-v1-2-2a648ac7176b@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-20Input: xpad - add support for Machenike G5 Pro ControllerKirill Artemev1-0/+2
Add VID and PID to the xpad_device and VID to the xpad_table to allow driver to use Machenike G5 Pro Controller, which is XTYPE_XBOX360 compatible in Xinput mode. Signed-off-by: Kirill Artemev <artewar6767@gmail.com> Link: https://lore.kernel.org/r/20240516032926.12501-2-artewar6767@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-19Input: try trimming too long modalias stringsDmitry Torokhov1-15/+89
If an input device declares too many capability bits then modalias string for such device may become too long and not fit into uevent buffer, resulting in failure of sending said uevent. This, in turn, may prevent userspace from recognizing existence of such devices. This is typically not a concern for real hardware devices as they have limited number of keys, but happen with synthetic devices such as ones created by xen-kbdfront driver, which creates devices as being capable of delivering all possible keys, since it doesn't know what keys the backend may produce. To deal with such devices input core will attempt to trim key data, in the hope that the rest of modalias string will fit in the given buffer. When trimming key data it will indicate that it is not complete by placing "+," sign, resulting in conversions like this: old: k71,72,73,74,78,7A,7B,7C,7D,8E,9E,A4,AD,E0,E1,E4,F8,174, new: k71,72,73,74,78,7A,7B,7C,+, This should allow existing udev rules continue to work with existing devices, and will also allow writing more complex rules that would recognize trimmed modalias and check input device characteristics by other means (for example by parsing KEY= data in uevent or parsing input device sysfs attributes). Note that the driver core may try adding more uevent environment variables once input core is done adding its own, so when forming modalias we can not use the entire available buffer, so we reduce it by somewhat an arbitrary amount (96 bytes). Reported-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Andryuk <jandryuk@gmail.com> Link: https://lore.kernel.org/r/ZjAWMQCJdrxZkvkB@google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-13Input: drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König64-99/+99
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240509174158.2211071-2-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-13Input: zet6223 - remove an unused field in struct zet6223_tsChristophe JAILLET1-2/+0
In "struct zet6223_ts", the 'vcc' and 'vio' fields are unused. So, remove them. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3065d885341e2730dd3e7905d75514796a8c25e4.1715507858.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-13Input: chipone_icn8505 - remove an unused field in struct icn8505_dataChristophe JAILLET1-1/+0
In "struct icn8505_data", the 'wake_gpio' field is unused. There is also nothing about gpio neither in this driver nor in the data-sheet. So, remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/37443a675ca07c91c5f0118ce255406e6e3c08f5.1715502304.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-06Input: cros_ec_keyb - remove an unused field in struct cros_ec_keybChristophe JAILLET1-2/+0
In "struct cros_ec_keyb", the 'keymap_data' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/6bab1449c01c4537aa2d9cb4481e1d5da8aa2389.1714546173.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-06Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drvChristophe JAILLET1-2/+1
In "struct lpc32xx_kscan_drv", the 'irq' field is unused. Remove it. Found with cppcheck, unusedStructMember. While at it, move the 'row_shift' field in order to fill a hole in the structure (at least on 64 bits arch). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e006dfb77e35762c6e4f8ba6ba792b0c52fde375.1714545542.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-06Input: matrix_keypad - remove an unused field in struct matrix_keypadChristophe JAILLET1-1/+0
In "struct matrix_keypad", the 'gpio_all_disabled' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4f1a946789445500b6118b9ee1d6ef5255f8c696.1714542052.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-06Input: tca6416-keypad - remove unused struct tca6416_drv_dataChristophe JAILLET1-5/+0
"struct tca6416_drv_data" is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3e6fd1d0875ef3c90ecaab7adf7fd4a5e8e6f708.1714541432.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-06Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chipChristophe JAILLET1-1/+0
In "struct tca6416_keypad_chip", the 'irqnum' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/926c0f40040671565dcc54d5146a8f9511fb6d46.1714541432.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-05-06Input: da7280 - remove an unused field in struct da7280_hapticChristophe JAILLET1-1/+0
In "struct da7280_haptic", the 'legacy' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ac251b456933bcc6fe297b738f9304bd259185c1.1714539865.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-30Input: ff-core - prefer struct_size over open coded arithmeticErick Archer1-3/+4
This is an effort to get rid of all multiplications from allocation functions in order to prevent integer overflows [1][2]. As the "ff" variable is a pointer to "struct ff_device" and this structure ends in a flexible array: struct ff_device { [...] struct file *effect_owners[] __counted_by(max_effects); }; the preferred way in the kernel is to use the struct_size() helper to do the arithmetic instead of the calculation "size + count * size" in the kzalloc() function. The struct_size() helper returns SIZE_MAX on overflow. So, refactor the comparison to take advantage of this. This way, the code is more readable and safer. This code was detected with the help of Coccinelle, and audited and modified manually. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/160 [2] Signed-off-by: Erick Archer <erick.archer@outlook.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/AS8PR02MB72371E646714BAE2E51A6A378B152@AS8PR02MB7237.eurprd02.prod.outlook.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-30Input: amimouse - mark driver struct with __refdata to prevent section mismatchUwe Kleine-König1-1/+7
As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent the following section mismatch warning WARNING: modpost: drivers/input/mouse/amimouse: section mismatch in reference: amimouse_driver+0x8 (section: .data) -> amimouse_remove (section: .exit.text) that triggers on an allmodconfig W=1 build. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/2e3783106bf6bd9a7bdeb12b706378fb16316471.1711748999.git.u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-25Input: cyapa - add missing input core locking to suspend/resume functionsMarek Szyprowski1-1/+11
Grab input->mutex during suspend/resume functions like it is done in other input drivers. This fixes the following warning during system suspend/resume cycle on Samsung Exynos5250-based Snow Chromebook: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6c Modules linked in: ... CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf1625fb0 to 0xf1625ff8) ... ---[ end trace 0000000000000000 ]--- Fixes: d69f0a43c677 ("Input: use input_device_enabled()") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20231009121018.1075318-1-m.szyprowski@samsung.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-24Input: xpad - add support for ASUS ROG RAIKIRIVicki Pfau1-0/+2
Add the VID/PID for ASUS ROG RAIKIRI to xpad_device and the VID to xpad_table Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20240404035345.159643-1-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-17input: pm8xxx-vibrator: add new SPMI vibrator supportFenglin Wu1-9/+43
Add support for a new SPMI vibrator module which is very similar to the vibrator module inside PM8916 but has a finer drive voltage step and different output voltage range, its drive level control is expanded across 2 registers. The vibrator module can be found in following Qualcomm PMICs: PMI632, PM7250B, PM7325B, PM7550BA. Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240416-pm8xxx-vibrator-new-design-v11-3-7b1c951e1515@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-17input: pm8xxx-vibrator: refactor to support new SPMI vibratorFenglin Wu1-16/+25
Currently, vibrator control register addresses are hard coded, including the base address and offsets, it's not flexible to support new SPMI vibrator module which is usually included in different PMICs with different base address. Refactor it by using the base address defined in devicetree. Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240416-pm8xxx-vibrator-new-design-v11-1-7b1c951e1515@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-15Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculationFenglin Wu1-3/+4
The output voltage is inclusive hence the max level calculation is off-by-one-step. Correct it. iWhile we are at it also add a define for the step size instead of using the magic value. Fixes: 11205bb63e5c ("Input: add support for pm8xxx based vibrator driver") Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240412-pm8xxx-vibrator-new-design-v10-1-0ec0ad133866@quicinc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-15Input: sur40 - convert le16 to cpu before useRicardo Ribalda1-1/+1
Smatch found this issue: drivers/input/touchscreen/sur40.c:424:55: warning: incorrect type in argument 2 (different base types) drivers/input/touchscreen/sur40.c:424:55: expected int key drivers/input/touchscreen/sur40.c:424:55: got restricted __le16 [usertype] blob_id Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20240410-smatch-v1-6-785d009a852b@chromium.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-28Input: adafruit-seesaw - only report buttons that changed stateDmitry Torokhov1-3/+18
If a button has not changed its state when we poll the device the driver does not need to report it. While duplicate events will be filtered out by the input core anyway we can do it very cheaply directly in the driver. Link: https://lore.kernel.org/r/ZZ-U_bmZpIdoYA6c@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-28Input: ioc3kbd - add device tableKarel Balej1-0/+7
Without the device table the driver will not auto-load when compiled as a module. Fixes: 273db8f03509 ("Input: add IOC3 serio driver") Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240313115832.8052-1-balejk@matfyz.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-28Input: ims-pcu - fix printf string overflowArnd Bergmann1-2/+2
clang warns about a string overflow in this driver drivers/input/misc/ims-pcu.c:1802:2: error: 'snprintf' will always be truncated; specified size is 10, but format string expands to at least 12 [-Werror,-Wformat-truncation] drivers/input/misc/ims-pcu.c:1814:2: error: 'snprintf' will always be truncated; specified size is 10, but format string expands to at least 12 [-Werror,-Wformat-truncation] Make the buffer a little longer to ensure it always fits. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240326223825.4084412-7-arnd@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-28Input: stmpe - drop driver owner assignmentKrzysztof Kozlowski1-1/+0
Core in platform_driver_register() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240327174655.519503-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-15Merge branch 'next' into for-linusDmitry Torokhov24-539/+1364
Prepare input updates for 6.9 merge window.
2024-03-15Input: xpad - add support for Snakebyte GAMEPADsMatt Scialabba1-0/+3
Add Snakebyte GAMEPAD BASE X and Snakebyte GAMEPAD RGB X to the list of supported devices. Signed-off-by: Matt Scialabba <matt.git@fastmail.fm> Link: https://lore.kernel.org/r/efbfb428-06b0-48f9-8701-db291c2a9d65@app.fastmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-10Input: imagis - add touch key supportDuje Mihanović1-1/+29
IST3032C (and possibly some other models) has touch keys. Add support for them to the imagis driver. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-3-2c429afa8420@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-10Input: imagis - use FIELD_GET where applicableDuje Mihanović1-11/+7
Instead of manually extracting certain bits from registers with binary ANDs and shifts, the FIELD_GET macro can be used. With this in mind, the *_SHIFT macros can be dropped. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-1-2c429afa8420@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-10Input: make input_class constantRicardo B. Marliere1-1/+1
Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the input_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240305-class_cleanup-input-v1-1-0c3d950c25db@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-07Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removalMathias Krause1-3/+3
Calling irq_domain_remove() will lead to freeing the IRQ domain prematurely. The domain is still referenced and will be attempted to get used via rmi_free_function_list() -> rmi_unregister_function() -> irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer. With PaX's MEMORY_SANITIZE this will lead to an access fault when attempting to dereference embedded pointers, as in Torsten's report that was faulting on the 'domain->ops->unmap' test. Fix this by releasing the IRQ domain only after all related IRQs have been deactivated. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Mathias Krause <minipli@grsecurity.net> Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-07Input: iqs7222 - add support for IQS7222D v1.1 and v1.2Jeff LaBundy1-0/+112
The vendor has introduced two new revisions with slightly different memory maps; update the driver to support them. Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D") Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/ZelTRYX3fenMQuhF@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-05Input: gpio_keys_polled - suppress deferred probe error for gpioUwe Kleine-König1-6/+4
On a PC Engines APU our admins are faced with: $ dmesg | grep -c "gpio-keys-polled gpio-keys-polled: unable to claim gpio 0, err=-517" 261 Such a message always appears when e.g. a new USB device is plugged in. Suppress this message which considerably clutters the kernel log for EPROBE_DEFER (i.e. -517). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240305101042.10953-2-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-05Revert "Input: bcm5974 - check endpoint type before starting traffic"Javier Carrasco1-20/+0
This patch intended to fix an well-knonw issue in old drivers where the endpoint type is taken for granted, which is often triggered by fuzzers. That was the case for this driver [1], and although the fix seems to be correct, it uncovered another issue that leads to a regression [2], if the endpoints of the current interface are checked. The driver makes use of endpoints that belong to a different interface rather than the one it binds (it binds to the third interface, but also accesses an endpoint from a different one). The driver should claim the interfaces it requires, but that is still not the case. Given that the regression is more severe than the issue found by syzkaller, the best approach is reverting the patch that causes the regression, and trying to fix the underlying problem before checking the endpoint types again. Note that reverting this patch will probably trigger the syzkaller bug at some point. This reverts commit 2b9c3eb32a699acdd4784d6b93743271b4970899. Link: https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 [1] Link: https://lore.kernel.org/linux-input/87sf161jjc.wl-tiwai@suse.de/ [2] Fixes: 2b9c3eb32a69 ("Input: bcm5974 - check endpoint type before starting traffic") Reported-by: Jacopo Radice <jacopo.radice@outlook.com> Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220030 Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240305-revert_bcm5974_ep_check-v3-1-527198cf6499@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03Input: serio - make serio_bus constRicardo B. Marliere1-1/+1
Now that the driver core can properly handle constant struct bus_type, move the serio_bus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-2-0daef7e034e0@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03Input: synaptics-rmi4 - make rmi_bus_type constRicardo B. Marliere2-2/+2
Now that the driver core can properly handle constant struct bus_type, move the variable rmi_bus_type to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240210-bus_cleanup-input2-v1-1-0daef7e034e0@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe functionYang Li1-2/+1
The existing comment block above the xps2_of_probe function does not conform to the kernel-doc standard. This patch fixes the documentation to match the expected kernel-doc format, which includes a structured documentation header with param and return value. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20240301092115.123092-1-yang.lee@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03input/touchscreen: imagis: add support for IST3032CKarel Balej1-0/+10
IST3032C is a touchscreen chip used for instance in the samsung,coreprimevelte smartphone, with which this was tested. Add the chip specific information to the driver. Reviewed-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-6-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03input/touchscreen: imagis: Add support for Imagis IST3038BMarkuss Broks1-11/+47
Imagis IST3038B is another variant of Imagis IST3038 IC, which has a different register interface from IST3038C (possibly firmware defined). This should also work for IST3044B (though untested), however other variants using this interface/protocol(IST3026, IST3032, IST3026B, IST3032B) have a different format for coordinates, and they'd need additional effort to be supported by this driver. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-4-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03input/touchscreen: imagis: Correct the maximum touch area valueMarkuss Broks1-1/+1
As specified in downstream IST3038B driver and proved by testing, the correct maximum reported value of touch area is 16. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03Input: xpad - add additional HyperX Controller IdentifiersMax Nguyen1-0/+6
Add additional HyperX device identifiers to xpad_device and xpad_table. Suggested-by: Chris Toledanes<chris.toledanes@hp.com> Reviewed-by: Carl Ng <carl.ng@hp.com> Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/44ad5ffa-76d8-4046-94ee-2ef171930ed2@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03Input: leds - change config symbol dependency for audio mute triggerHeiner Kallweit1-1/+1
In a follow-up patch implementation of the LED audio trigger will be moved to sound/core/snd_ctl_led, including removal of config symbol LEDS_AUDIO_TRIGGER. Also as of today the audio mute LED trigger is effectively a no-op w/o config symbol SND_CTL_LED being defined. Therefore switch the dependency to this config symbol. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6011ca63-187c-42dd-a5fd-7dd733d6257c@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-09Input: ti_am335x_tsc - remove redundant assignment to variable configColin Ian King1-1/+0
The variable config is being initialized with a value that is never read, it is being re-assigned in the next statement. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/input/touchscreen/ti_am335x_tsc.c:160:2: warning: Value stored to 'config' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240205215940.1851349-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-08Input: xpad - sort xpad_device by vendor and product IDBrenton Simpson1-3/+8
This helps making sure there are no duplicate entries in the tables. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240130231903.293265-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-06Input: gameport - make gameport_bus constRicardo B. Marliere1-2/+2
Now that the driver core can properly handle constant struct bus_type, move the gameport_bus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240204-bus_cleanup-input-v1-1-74c2438801cf@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-02Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk tableSzilard Fabian1-0/+8
Another Fujitsu-related patch. In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard. i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:3092) not working at all. So this notebook uses a hid-over-i2c touchpad which is managed by the i2c_designware input driver. Since you can't find a PS/2 mouse port on this computer and you can't connect a PS/2 mouse to it even with an official port replicator I think it's safe to not use the PS/2 mouse port at all. Signed-off-by: Szilard Fabian <szfabian@bluemarch.art> Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-02Input: i8042 - fix strange behavior of touchpad on Clevo NS70PUWerner Sembach1-0/+6
When closing the laptop lid with an external screen connected, the mouse pointer has a constant movement to the lower right corner. Opening the lid again stops this movement, but after that the touchpad does no longer register clicks. The touchpad is connected both via i2c-hid and PS/2, the predecessor of this device (NS70MU) has the same layout in this regard and also strange behaviour caused by the psmouse and the i2c-hid driver fighting over touchpad control. This fix is reusing the same workaround by just disabling the PS/2 aux port, that is only used by the touchpad, to give the i2c-hid driver the lone control over the touchpad. v2: Rebased on current master Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-01Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETIDHans de Goede1-1/+2
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") not only the getid command is skipped, but also the de-activating of the keyboard at the end of atkbd_probe(), potentially re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd - fix multi-byte scancode handling on reconnect"). Make sure multi-byte scancode handling on reconnect is still handled correctly by not skipping the atkbd_deactivate() call. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-01Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETIDHans de Goede1-5/+8
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models has stopped working after a suspend/resume. The problem appears to be that atkbd_probe() fails when called from atkbd_reconnect() on resume, which on systems where ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was skipped is weird, but apparently that is what is happening. Fix this by also skipping ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Powered by cgit, Gruvboxed by Blaster4385.