aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)AuthorFilesLines
2015-03-02Input: sun4i-ts - add thermal driver dependencyArnd Bergmann1-0/+1
The sun4i-ts driver has had a dependency on the thermal code with the addition of the thermal zone sensor support, but this is not currently enforced in Kconfig, so with TOUCHSCREEN_SUN4I=y, THERMAL=m and THERMAL_OF=y we get drivers/built-in.o: In function `sun4i_ts_remove': :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `sun4i_ts_probe': :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' We need the dependency on THERMAL in order to ensure that this driver becomes a loadable module if the thermal support itself is modular, while the dependency on THERMAL_OF is a runtime dependency and the driver will still build if it is missing. It is entirely possible to build sun4i-ts without THERMAL_OF just to use the hwmon sensors and/or touchscreen. Fixes: 223697107949 ("Input: sun4i-ts - add thermal zone sensor support") Signed-off-by: Arnd Bergmann <[email protected]> [[email protected]: Fix description and Kconfig dependencies] Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-02-03Input: ti_am335x_tsc - replace delta filtering with median filteringVignesh R1-40/+52
Previously, delta filtering was applied TSC co-ordinate readouts before reporting a single value to user space. This patch replaces delta filtering with median filtering. Median filtering sorts co-ordinate readouts, drops min and max values, and reports the average of remaining values. This method is more sensible than delta filtering. Median filtering is applied only if number of readouts is greater than 3 else just average of co-ordinate readouts is reported. Signed-off-by: Vignesh R <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-02-03Input: ti_am335x_tsc - read charge delay from DTVignesh R1-1/+13
This patch reads charge delay from tsc DT node and writes to REG_CHARGEDELAY register. If the charge delay is not specified in DT then default value of 0x400(CHARGEDLY_OPENDLY) is used. Signed-off-by: Vignesh R <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-02-03Input: ti_am335x_tsc - remove udelay in interrupt handlerBrad Griffis1-36/+31
TSC interrupt handler had udelay to avoid reporting of false pen-up interrupt to user space. This patch implements workaround suggesting in Advisory 1.0.31 of silicon errata for am335x, thus eliminating udelay and touchscreen lag. This also improves performance of touchscreen and eliminates sudden jump of cursor at touch release. IDLECONFIG and CHARGECONFIG registers are to be configured with same values in order to eliminate false pen-up events. This workaround may result in false pen-down to be detected, hence considerable charge step delay needs to be added. The charge delay is set to 0xB000 (in terms of ADC clock cycles) by default. TSC steps are disabled at the end of every sampling cycle and EOS bit is set. Once the EOS bit is set, the TSC steps need to be re-enabled to begin next sampling cycle. Signed-off-by: Brad Griffis <[email protected]> [[email protected]: Ported the patch from v3.12 to v3.19rc1] Signed-off-by: Vignesh R <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-02-03Input: ti_am335x_tsc - interchange touchscreen and ADC stepsBrad Griffis1-18/+24
This patch makes the initial changes required to workaround TSC-false pen-up interrupts. It is required to implement these changes in order to remove udelay in the TSC interrupt handler and false pen-up events. The charge step is to be executed immediately after sampling X+. Hence TSC is made to use higher numbered steps (steps 5 to 16 for 5 co-ordinate readouts, 4 wire TSC configuration) and ADC to use lower ones. Further X co-ordinate readouts must be the last to be sampled, thus co-ordinates are sampled in the order Y-Z-X. Signed-off-by: Brad Griffis <[email protected]> [[email protected]: Ported the patch from v3.12 to v3.19rc1] Signed-off-by: Vignesh R <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-02-01Input: MT - add support for balanced slot assignmentHenrik Rydberg1-1/+1
Some devices are not fast enough to differentiate between a fast-moving contact and a new contact. This problem cannot be fully resolved because information is truly missing, but it is possible to safe-guard against obvious mistakes by restricting movement with a maximum displacement. The new problem formulation for dmax > 0 cannot benefit from the speedup for positive definite matrices, but since the convergence is faster, the result is about the same. For a handful of contacts, the latency difference is truly negligible. Suggested-by: Benjamin Tissoires <[email protected]> Tested-by: Benjamin Tissoires <[email protected]> Signed-off-by: Henrik Rydberg <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-01-26Input: sun4i-ts - add support for touchpanel controller on A31Chen-Yu Tsai1-13/+33
The Allwinner A31 SoC (sun6i) has the same resistive touchpanel controller as on other sunxi platforms. The only difference between the variants is the control bits for enabling operations are left-shifted by 1 on the A31. Also update the comment for the original temperature sensor with information from Allwinner. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-01-18Input: sun4i-ts - add thermal zone sensor supportChen-Yu Tsai1-4/+50
The touchscreen controller has a temperature sensor embedded in the SoC, which already has hwmon support in the driver. Add DT thermal zone support so we can use it with cpufreq for thermal throttling. This also adds a comment stating that we do not know the actual formula for calculating the temperature. Signed-off-by: Chen-Yu Tsai <[email protected]> Acked-by: Eduardo Valentin <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2015-01-15Merge tag 'v3.19-rc4' into nextDmitry Torokhov22-101/+33
Merge with mainline to bring in the latest thermal and other changes.
2014-12-31Revert "Input: atmel_mxt_ts - use deep sleep mode when stopped"Linus Torvalds1-73/+26
This reverts commit 9d469d033d135d80742a4e39e6bbb4519dd5eee1. It breaks the Chromebook Pixel touchpad (and touchscreen). Reported-by: Dirk Hohndel <[email protected]> Bisected-by: Linus Torvalds <[email protected]> Cc: Nick Dyer <[email protected]> Cc: Benson Leung <[email protected]> Cc: Yufeng Shen <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: [email protected] # v3.16+ Signed-off-by: Linus Torvalds <[email protected]>
2014-12-30Merge branch 'for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for v7 protocol for ALPS devices and few other driver fixes. Also users can request input events to be stamped with boot time timestamps, in addition to real and monotonic timestamps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hil_kbd - fix incorrect use of init_completion Input: alps - v7: document the v7 touchpad packet protocol Input: alps - v7: fix finger counting for > 2 fingers on clickpads Input: alps - v7: sometimes a single touch is reported in mt[1] Input: alps - v7: ignore new packets Input: evdev - add CLOCK_BOOTTIME support Input: psmouse - expose drift duration for IBM trackpoints Input: stmpe - bias keypad columns properly Input: stmpe - enforce device tree only mode mfd: stmpe: add pull up/down register offsets for STMPE Input: optimize events_per_packet count calculation Input: edt-ft5x06 - fixed a macro coding style issue Input: gpio_keys - replace timer and workqueue with delayed workqueue Input: gpio_keys - allow separating gpio and irq in device tree
2014-12-29Input: elants_i2c - remove unnecessary version.h inclusionFabian Frederick1-2/+0
Based on versioncheck. Signed-off-by: Fabian Frederick <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-12-18Merge branch 'next' into for-linusDmitry Torokhov1-1/+3
Second round of input updates for 3.19.
2014-12-17Merge branch 'for-linus' of ↵Linus Torvalds23-78/+1731
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Two new drivers for Elan hardware (for I2C touchpad and touchscreen found in several Chromebooks and other devices), a driver for Goodix touch panel, and small fixes to Cypress I2C trackpad and other input drivers. Also we switched to use __maybe_unused instead of gating suspend/ resume code with #ifdef guards to get better compile coverage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: gpio_keys - fix warning regarding uninitialized 'button' variable Input: add support for Elan eKTH I2C touchscreens Input: gpio_keys - fix warning regarding uninitialized 'irq' variable Input: cyapa - use 'error' for error codes Input: cyapa - fix resuming the device Input: gpio_keys - add device tree support for interrupt only keys Input: amikbd - allocate temporary keymap buffer on the stack Input: amikbd - fix build if !CONFIG_HW_CONSOLE Input: lm8323 - missing error check in lm8323_set_disable() Input: initialize device counter variables with -1 Input: initialize input_no to -1 to avoid subtraction Input: i8042 - do not try to load on Intel NUC D54250WYK Input: atkbd - correct MSC_SCAN events for force_release keys Input: cyapa - switch to using managed resources Input: lifebook - use "static inline" instead of "inline" in lifebook.h Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume Input: mouse - use __maybe_unused instead of ifdef around suspend/resume Input: misc - use __maybe_unused instead of ifdef around suspend/resume Input: cap11xx - support for irq-active-high option Input: cap11xx - add support for various cap11xx devices ...
2014-12-15Input: edt-ft5x06 - fixed a macro coding style issueAsaf Vertz1-1/+3
Fixed a coding style error, macros with complex values should be enclosed in parentheses. Signed-off-by: Asaf Vertz <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-12-15Merge branch 'next' into for-linusDmitry Torokhov23-78/+1731
Prepare input updates for 3.19.
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds17-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-07Input: add support for Elan eKTH I2C touchscreensScott Liu3-0/+1284
This driver supports Elan eKTH I2C touchscreen controllers. Note that these are using custom protocol, as opposed to other Elan parts that use HID-over-I2C and are supported by the standard HID-multitouch driver. Signed-off-by: Scott Liu <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-12-05input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki1-1/+1
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. The alternative of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME may be replaced with CONFIG_PM too. Make these changes in 2 files under drivers/input/. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Jingoo Han <[email protected]> Reviewed-by: Ferruh Yigit <[email protected]> Acked-by: Dmitry Torokhov <[email protected]>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman17-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-02Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resumeJingoo Han19-78/+38
Use __maybe_unused instead of ifdef guards around suspend/resume functions, in order to increase build coverage and fix build warnings. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-10-31Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
2014-10-31Input: add driver for the Goodix touchpanelBastien Nocera3-0/+409
Add a driver for the Goodix touchscreen panel found in Onda v975w tablets. The driver is based off the Android driver gt9xx.c found in some Android code dumps, but now bears no resemblance to the original driver. The driver was tested on the aforementioned tablet. Signed-off-by: Bastien Nocera <[email protected]> Tested-by: Bastien Nocera <[email protected]> Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-10-24Input: wm97xx - adapt parameters to tosa touchscreen.Dmitry Eremin-Solenikov1-2/+2
Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all points on the screen. Expand ranges in abs_x and abs_y arrays according to the touchscreen area. Signed-off-by: Dmitry Eremin-Solenikov <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-10-20input: touchscreen: drop owner assignment from platform_driversWolfram Sang17-17/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <[email protected]>
2014-10-19Merge branch 'for-linus' of ↵Linus Torvalds3-0/+194
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
2014-10-14input: edt-ft5x06: replace strnicmp with strncasecmpRasmus Villemoes1-1/+1
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <[email protected]> Cc: Dmitry Torokhov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-11Merge tag 'v3.17' into nextDmitry Torokhov3-8/+21
Synchronize with mainline to bring in changes to Synaptics and i8042 drivers.
2014-10-09Input: Add Microchip AR1021 i2c touchscreenChristian Gmeiner3-0/+194
This patch adds support for the ar1021 i2c based touchscreen. The driver is quite simple and only supports the Touch Reporting Protocol. This is the final version for an RFC patch send a while ago. http://www.spinics.net/lists/linux-input/msg29419.html Signed-off-by: Christian Gmeiner <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds1-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe1-7/+3
this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <[email protected]> Acked-by: Michael Büsch <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Tomi Valkeinen <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2014-09-10Input: atmel_mxt_ts - fix double free of input deviceStephen Warren1-5/+13
[Nick Dyer: reworked to move free of input device into separate function and only call in paths that require it.] Signed-off-by: Nick Dyer <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-09-09Input: atmel_mxt_ts - downgrade warning about empty interruptsNick Dyer1-1/+6
In the case where the CHG/interrupt line mode is not configured correctly, this warning is output to dmesg output for each interrupt. Downgrade the message to debug. Signed-off-by: Nick Dyer <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-09-09Input: wm971x - fix typo in module parameter descriptionMasanari Iida2-2/+2
Signed-off-by: Masanari Iida <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-08-14Merge branch 'next' into for-linusDmitry Torokhov2-169/+198
Prepare second round of input updates for 3.17.
2014-08-13Input: edt-ft5x06 - remove superfluous assignmentMaks Naumov1-1/+0
Somehow we ended up with a duplicate line in edt_ft5x06_register_write() Signed-off-by: Maks Naumov <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-08-13Input: atmel_mxt_ts - fix a few issues reported by CoverityDmitry Torokhov1-6/+11
This should fix the following issues reported by Coverity: *** CID 1230625: Logically dead code (DEADCODE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1692 in mxt_initialize() *** CID 1230627: Missing break in switch (MISSING_BREAK) /drivers/input/touchscreen/atmel_mxt_ts.c: 1436 in mxt_get_object_table() *** CID 1230629: Out-of-bounds write (OVERRUN) /drivers/input/touchscreen/atmel_mxt_ts.c: 1267 in mxt_update_cfg() *** CID 1230632: Unused pointer value (UNUSED_VALUE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1211 in mxt_update_cfg() Acked-by: Nick Dyer <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-08-13Input: atmel_mxt_ts - split config update a bitDmitry Torokhov1-125/+145
Let's split config update code a bit so it is hopefully a bit easier to read. Also, the firmware update callback should be the entity releasing firmware blob, not lower layers. Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Nick Dyer <[email protected]>
2014-08-13Input: atmel_mxt_ts - simplify mxt_initialize a bitDmitry Torokhov1-39/+42
I think having control flow with 2 goto/labels/flags is quite hard to read, this version is a bit more readable IMO. Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Nick Dyer <[email protected]>
2014-08-07Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AANick Dyer1-3/+5
Signed-off-by: Nick Dyer <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-08-06Merge branch 'next' into for-linusDmitry Torokhov12-791/+1442
Prepare first round of input updates for 3.17.
2014-07-31Input: jornada720_ts - get rid of space indentation and use tabPramod Gurav1-13/+12
Signed-off-by: Pramod Gurav <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-31Input: jornada720_ts - switch to using managed resourcesPramod Gurav1-32/+13
This switches the driver to using managed resources to simplify error handling and to do away with remove function. Signed-off-by: Pramod Gurav <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-30Input: mcs5000_ts - remove ifdef around power management methodsFabio Estevam1-4/+2
We can annonate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-30Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEPFabio Estevam1-1/+1
When a kernel has CONFIG_PM=y and CONFIG_PM_SLEEP=n the following warnings are seen: drivers/input/touchscreen/mcs5000_ts.c:252:12: warning: 'mcs5000_ts_suspend' defined but not used [-Wunused-function] static int mcs5000_ts_suspend(struct device *dev) ^ drivers/input/touchscreen/mcs5000_ts.c:262:12: warning: 'mcs5000_ts_resume' defined but not used [-Wunused-function] static int mcs5000_ts_resume(struct device *dev) Protect the suspend/resume functions with CONFIG_PM_SLEEP in order to fix these build warnings. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-30Input: ads7846 - release resources on failure for clean exitPramod Gurav1-2/+4
Input device must be released(input_free_device) when ads7846_probe_dt fails. This fixes the same by releasing resources on failure. Signed-off-by: Pramod Gurav <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-28Input: atmel_mxt_ts - use deep sleep mode when stoppedNick Dyer1-26/+73
By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer <[email protected]> Acked-by: Benson Leung <[email protected]> Acked-by: Yufeng Shen <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-28Input: pixcir_i2c_ts - add device tree supportRoger Quadros1-0/+77
Provide device tree support and binding information. Also provide support for a new chip "pixcir_tangoc". Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-28Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDsRoger Quadros1-17/+57
Some variants of the Pixcir touch controller support up to 5 simultaneous fingers and hardware tracking IDs. Prepare the driver for that. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-07-28Input: pixcir_i2c_ts - use Type-B Multi-Touch protocolRoger Quadros1-31/+94
Switch to using the Type-B Multi-Touch protocol. Reviewed-by: Henrik Rydberg <[email protected]> Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.