aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/misc
AgeCommit message (Collapse)AuthorFilesLines
2023-05-15mfd: rk808: Split into core and i2cSebastian Reichel1-1/+1
Split rk808 into a core and an i2c part in preparation for SPI support. Acked-by: Alexandre Belloni <[email protected]> # for RTC Tested-by: Diederik de Haas <[email protected]> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <[email protected]> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2023-05-11Input: soc_button_array - add invalid acpi_index DMI quirk handlingHans de Goede1-0/+30
Some devices have a wrong entry in their button array which points to a GPIO which is required in another driver, so soc_button_array must not claim it. A specific example of this is the Lenovo Yoga Book X90F / X90L, where the PNP0C40 home button entry points to a GPIO which is not a home button and which is required by the lenovo-yogabook driver. Add a DMI quirk table which can specify an ACPI GPIO resource index which should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L to this new DMI quirk table. Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-10Input: adxl34x - do not hardcode interrupt trigger typeMarek Vasut1-2/+1
Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_HIGH, let's respect the settings specified in the firmware description. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Marek Vasut <[email protected]> Acked-by: Michael Hennerich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-08Input: pwm-vibra - add support for enable GPIOLuca Weiss1-0/+16
Some pwm vibrators have a dedicated enable GPIO that needs to be set high so that the vibrator works. Add support for that optionally. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Brian Masney <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Reviewed-by: Caleb Connolly <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-08Input: pwm-vibra - add newline to dev_err printsLuca Weiss1-10/+10
Make sure all printed messages end with a newline. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Caleb Connolly <[email protected]> Reviewed-by: Brian Masney <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-01Input: uinput - allow injecting event timesBiswarup Pal1-0/+34
Currently, uinput doesn't use the input_set_timestamp API, so any event injected using uinput is not accurately timestamped in terms of measuring when the actual event happened. Hence, call the input_set_timestamp API from uinput in order to provide a more accurate sense of time for the event. Propagate only the timestamps which are a) positive, b) within a pre-defined offset (10 secs) from the current time, and c) not in the future. Signed-off-by: Biswarup Pal <[email protected]> Reviewed-by: Peter Hutterer <[email protected]> Reviewed-by: Siarhei Vishniakou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-01Input: drv260x - fix magnitude handlingLuca Weiss1-6/+7
First of all, previously the 16-bit magnitude was written as-is to the device which actually discarded the upper 8 bits since the device has 8-bit registers only. This meant that a strong_magnitude of 0xFF00 would result in 0. To correct this shift the strong_magnitude / weak_magnitude input values so we discard the lower 8 bits and keep the upper bits instead. Secondly the RTP mode that is used by default interprets the values as signed (2s complement), so 0x81 = 0%, 0x00 = 50%, 0x7F = 100%. This doesn't match the FF_RUMBLE interface at all, so let's tell the device to interpret the data as unsigned instead which gets us 0x00 = 0% and 0xFF = 100%. As last change switch ERM to using "Closed-Loop Mode, Unidirectional" instead of "Open-Loop Mode" since it's recommended by the datasheet compared to open loop and better matches our use case of 0% - 100% vibration. Signed-off-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-01Input: drv260x - remove unused .reg_defaultsLuca Weiss1-40/+0
Since the driver has disabled regmap caching with REGCACHE_NONE, it's warning us that we provide defaults that are not used. Remove them. [ 0.561159] drv260x-haptics 0-005a: No cache used with register defaults set! Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-01Input: drv260x - sleep between polling GO bitLuca Weiss1-0/+1
When doing the initial startup there's no need to poll without any delay and spam the I2C bus. Let's sleep 15ms between each attempt, which is the same time as used in the vendor driver. Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-05-01Input: drv260x - fix typo in register value defineLuca Weiss1-2/+2
ANANLOG should be ANALOG. Fix the typo. Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-04-09Input: cma3000_d0x - remove unneeded codeJiapeng Chong1-2/+0
Function input_set_abs_params() has already set EV_ABS bit for us. drivers/input/misc/cma3000_d0x.c:328 cma3000_init() warn: inconsistent indenting. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-03-17Merge tag 'v6.3-rc2' into nextDmitry Torokhov1-3/+2
Merge with mainline to get of_property_present() and other newer APIs.
2023-02-25Merge tag 'input-for-v6.3-rc0' of ↵Linus Torvalds36-504/+346
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a set of tweaks to iqs269a touch controller driver - a fix for ads7846 driver to properly handle 7845 chip - cap11xx driver will support cap1203, cap1293 and cap1298 models - xpad driver will support 8BitDo Pro 2 Wired Controller - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() - other miscellaneous fixes and tweaks * tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits) dt-bindings: input: iqs626a: Redefine trackpad property types Input: iqs626a - drop unused device node references dt-bindings: input: touchscreen: st,stmfts: convert to dtschema Input: cyttsp5 - fix bitmask for touch buttons Input: exc3000 - properly stop timer on shutdown Input: synaptics-rmi4 - fix SPI device ID Input: cap11xx - add support for cap1203, cap1293 and cap1298 dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298 Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation Input: edt-ft5x06 - fix typo in a comment Input: tegra-kbc - use devm_platform_get_and_ioremap_resource() Input: st-keyscan - use devm_platform_get_and_ioremap_resource() Input: spear-keyboard - use devm_platform_get_and_ioremap_resource() Input: olpc_apsp - use devm_platform_get_and_ioremap_resource() Input: arc_ps2 - use devm_platform_get_and_ioremap_resource() Input: apbps2 - use devm_platform_get_and_ioremap_resource() Input: altera_ps2 - use devm_platform_get_and_ioremap_resource() Input: ads7846 - don't check penirq immediately for 7845 Input: ads7846 - always set last command to PWRDOWN Input: ads7846 - don't report pressure for ads7845 ...
2023-02-21Input: hp_sdc_rtc - mark an unused function as __maybe_unusedRandy Dunlap1-1/+1
When CONFIG_PROC_FS is not set, one procfs-related function is not used, causing a build error or warning. Mark this function as __maybe_unused to quieten the build. ../drivers/input/misc/hp_sdc_rtc.c:268:12: warning: 'hp_sdc_rtc_proc_show' defined but not used [-Wunused-function] 268 | static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v) | ^~~~~~~~~~~~~~~~~~~~ Fixes: c18bd9a1ff47 ("hp_sdc_rtc: Don't use create_proc_read_entry()") Signed-off-by: Randy Dunlap <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-02-21Input: bbnsm_pwrkey - add bbnsm power key supportJacky Bai3-0/+205
The ON/OFF logic inside the BBNSM allows for connecting directly into a PMIC or other voltage regulator device. The module has an button input signal and a wakeup request input signal. It also has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an active-low PMIC enable (pmic_en_b) output. Add the power key support for the ON/OFF button function found in BBNSM module. Signed-off-by: Jacky Bai <[email protected]> Reviewed-by: Peng Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-02-03Input: iqs626a - drop unused device node referencesJeff LaBundy1-83/+73
Each call to device/fwnode_get_named_child_node() must be matched with a call to fwnode_handle_put() once the corresponding node is no longer in use. This ensures a reference count remains balanced in the case of dynamic device tree support. Currently, the driver never calls fwnode_handle_put(); this patch adds the missing calls. Because fwnode_handle_put() does not take a const *fwnode_handle, the const qualifier is removed across all corresponding *fwnode_handle instances. As part of this change, trackpad channel touch thresholds and ATI base values are now specified under single trackpad channel child nodes. This enhancement moves both properties to scalar values as opposed to arrays, making their types consistent across bindings. Fixes: f1d2809de97a ("Input: Add support for Azoteq IQS626A") Signed-off-by: Jeff LaBundy <[email protected]> Link: https://lore.kernel.org/r/Y9RQVe/V1Hnw1oly@nixie71 Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-27Input: wistron_btns - use pm_sleep_ptr() to allow removal of ifdef CONFIG_PM ↵Jonathan Cameron1-5/+1
guards As the guards only apply to suspend and resume, #ifdef CONFIG_PM_SLEEP would have been a tighter protection. As pm_sleep_ptr() lets the compiler see the protected ops structure and callbacks but also lets the compiler remove it as unused code if !CONFIG_PM_SLEEP this allows the #ifdef guards to be removed, slightly simplifying the resulting code. -- It seems likely that DEFINE_SIMPLE_DEV_PM_OPS() would work here but I'd prefer not to make that change unless someone can confirm that the extra callbacks registered will have no unwanted side effects in this driver. Signed-off-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-27Input: cma3000 - use pm_sleep_ptr() to allow removal of ifdef CONFIG_PM guardsJonathan Cameron1-5/+1
As the guards only apply to suspend and resume, #ifdef CONFIG_PM_SLEEP would have been a tighter protection. As pm_sleep_ptr() lets the compiler see the protected ops structure and callbacks but also lets the compiler remove it as unused code if !CONFIG_PM_SLEEP this allows the #ifdef guards to be removed, slightly simplifying the resulting code. Signed-off-by: Jonathan Cameron <[email protected]> -- It seems likely that DEFINE_SIMPLE_DEV_PM_OPS() would work here but I'd prefer not to make that change unless someone can confirm that the extra callbacks registered will have no unwanted side effects in this driver. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-27Input: adxl34x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS()Jonathan Cameron4-54/+16
The I2C and SPI PM callbacks were identical (though wrapped in some bouncing out to the bus specific container of the struct device and then back again to get the drvdata). As such rather than just moving these to SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() take the opportunity to unify the struct dev_pm_ops and use the new EXPORT_SIMPLE_DEV_PM_OPS() macro so that we can drop the unused suspend and resume callbacks as well as the structure if !CONFIG_PM_SLEEP without needing to mark the callbacks __maybe_unused. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Michael Hennerich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-27Input: ad714x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS()Jonathan Cameron4-34/+10
The I2C and SPI PM callbacks were identical (though wrapped in some bouncing out to the bus specific container of the struct device and then back again to get the drvdata). As such rather than just moving these to SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() take the opportunity to unify the struct dev_pm_ops and use the new EXPORT_SIMPLE_DEV_PM_OPS() macro so that we can drop the unused suspend and resume callbacks as well as the structure if !CONFIG_PM_SLEEP without needing to mark the callbacks __maybe_unused. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Michael Hennerich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-27Input: axp20x-pek - switch to SYSTEM_SLEEP_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-7/+5
SET_SYSTEM_SLEEP_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Here the additional .resume_noirq callback is protected with pm_sleep_ptr(). This isn't strictly necessary but is done for consistency with the other callbacks. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-12Merge tag 'for-linus-6.2-rc4-tag' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
2023-01-10Input: iqs269a - do not poll during ATIJeff LaBundy1-51/+46
After initial start-up, the driver triggers ATI (calibration) with the newly loaded register configuration in place. Next, the driver polls a register field to ensure ATI completed in a timely fashion and that the device is ready to sense. However, communicating with the device over I2C while ATI is under- way may induce noise in the device and cause ATI to fail. As such, the vendor recommends not to poll the device during ATI. To solve this problem, let the device naturally signal to the host that ATI is complete by way of an interrupt. A completion prevents the device from successfully probing until this happens. As an added benefit, initial switch states are now reported in the interrupt handler at the same time ATI status is checked. As such, duplicate code that reports initial switch states has been removed from iqs269_input_init(). The former logic that scaled ATI timeout and filter settling delay is not carried forward with the new implementation, as it produces overly conservative delays at the lower clock rate. Rather, a single timeout that covers both clock rates is used. The filter settling delay does not happen to be necessary and has been removed as well. Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Link: https://lore.kernel.org/r/Y7RtB2T7AF9rYMjK@nixie71 Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-10Input: iqs269a - do not poll during suspend or resumeJeff LaBundy1-87/+31
Polling the device while it transitions from automatic to manual power mode switching may keep the device from actually finishing the transition. The process appears to time out depending on the polling rate and the device's core clock frequency. This is ultimately unnecessary in the first place; instead it is sufficient to write the desired mode during initialization, then disable automatic switching at suspend. This eliminates the need to ensure the device is prepared for a manual change and removes the 'suspend_mode' variable. Similarly, polling the device while it transitions from one mode to another under manual control may time out as well. This added step does not appear to be necessary either, so drop it. Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Link: https://lore.kernel.org/r/Y7Rs+eEXlRw4Vq57@nixie71 Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-10Input: iqs269a - configure device with a single block writeJeff LaBundy1-59/+39
Unless it is being done as part of servicing a soft reset interrupt, configuring channels on-the-fly (as is the case when writing to the ati_trigger attribute) may cause GPIO3 (which reflects the state of touch for a selected channel) to be inadvertently asserted. To solve this problem, follow the vendor's recommendation and write all channel configuration as well as the REDO_ATI register field as part of a single block write. This ensures the device has been told to re-calibrate itself following an I2C stop condition, after which sensing resumes and GPIO3 may be asserted. Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Link: https://lore.kernel.org/r/Y7Rs8GyV7g0nF5Yy@nixie71 Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-10Input: iqs269a - increase interrupt handler return delayJeff LaBundy1-1/+1
The time the device takes to deassert its RDY output following an I2C stop condition scales with the core clock frequency. To prevent level-triggered interrupts from being reasserted after the interrupt handler returns, increase the time before returning to account for the worst-case delay (~140 us) plus margin. Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Link: https://lore.kernel.org/r/Y7Rs484ypy4dab5G@nixie71 Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-10Input: iqs269a - drop unused device node referencesJeff LaBundy1-1/+11
Each call to device/fwnode_get_named_child_node() must be matched with a call to fwnode_handle_put() once the corresponding node is no longer in use. This ensures a reference count remains balanced in the case of dynamic device tree support. Currently, the driver does not call fwnode_handle_put() on nested event nodes. This patch solves this problem by adding the missing instances of fwnode_handle_put(). As part of this change, the logic which parses each channel's key code is gently refactored in order to reduce the number of places from which fwnode_handle_put() is called. Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A") Signed-off-by: Jeff LaBundy <[email protected]> Link: https://lore.kernel.org/r/Y7Rsx68k/gvDVXAt@nixie71 Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Merge tag 'v6.2-rc3' into nextDmitry Torokhov6-254/+173
Merge with mainline to bring in timer_shutdown_sync() API.
2023-01-09Input: twl6030-vibra - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-3/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Tony Lindgren <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: twl4030-vibra - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Tony Lindgren <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: stpmic1_onekey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-6/+6
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Pascal Paillet <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: rotary-encoder - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: regulator-haptic - switch to DEFINE_SIMPLE_DEV_PM_OPS() and ↵Jonathan Cameron1-4/+4
pm_sleep_ptr() SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: pwm-vibra - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: pwm-beeper - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: pmic8xxx-pwrkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Stephen Boyd <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: pm8xxx-vibrator - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-3/+3
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Damien Riegel <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: pm8941-pwrkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Stephen Boyd <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: pcfg8574_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-13/+3
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the #ifdef guards. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: palmas-pwrbutton - switch to DEFINE_SIMPLE_DEV_PM_OPS() and ↵Jonathan Cameron1-5/+5
pm_sleep_ptr() SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: max8997_haptic - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-3/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: max8925_onkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: max77693-haptic - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+6
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: kxtj9 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: iqs626a - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Jeff LaBundy <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: iqs269a - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Jeff LaBundy <[email protected]> Reviewed-by: Jeff LaBundy <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: gpio-vibra - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Luca Weiss <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: e3x0-button - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-5/+5
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Moritz Fischer <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: drv2667 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2023-01-09Input: drv2665 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.