aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2018-12-19RDMA/srp: Rework handling of the maximum information unit lengthBart Van Assche2-14/+29
Move the maximum initiator to target information unit length parameter from struct srp_target_port into struct srp_rdma_ch. This patch does not change any functionality but makes the next patch easier to read. Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-19RDMA/srp: Move srp_rdma_ch.max_ti_iu_len declarationBart Van Assche1-1/+2
Since srp_rdma_ch.max_ti_iu_len is used in the hot path, move it to the section with data structure members used in the hot path. Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-19RDMA/srp: Propagate ib_post_send() failures to the SCSI mid-layerBart Van Assche1-0/+1
This patch avoids that the SCSI mid-layer keeps retrying forever if ib_post_send() fails. This was discovered while testing immediate data support and passing a too large num_sge value to ib_post_send(). Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-19RDMA/srp: Handle large SCSI CDBs correctlyBart Van Assche2-6/+19
Reserve additional space for CDBs that contain more than sixteen bytes and set the add_cdb_len field for such CDBs as required. From the SRP standard: "The ADDITIONAL CDB LENGTH field contains the length in dwords of the ADDITIONAL CDB field." Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-19RDMA/srp: Document srp_parse_in() argumentsBart Van Assche1-0/+3
This patch avoids that a warning is reported when building with W=1. Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-19include/scsi/srp.h: Add support for immediate dataBart Van Assche1-0/+5
Add constants and data structures to support immediate data. These changes conform to SRP2r04. Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-19include/scsi/srp.h: Move response flag definitions into this fileBart Van Assche1-4/+0
This patch moves all constants that come from the SRP standard into the include/scsi/srp.h header file. Cc: Sergey Gorenko <sergeygo@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-19IB/mlx5: Fix compile issue when ODP disabledDoug Ledford1-4/+4
When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not enabled, we were getting build failures for defined but not used code. Fix that. Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-18scsi: flip the default on use_clusteringChristoph Hellwig2-2/+0
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18RDMA: Cleanup undesired pd->uobject usageShamir Rabinovitch24-113/+125
Drivers should be using udata to determine if a method is invoked from user space or kernel space. A pd does not necessarily say a different objects is kernel or user. Transforming the tests to use udata eliminates a large number of uobject references from the drivers. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/restrack: Resource-tracker should not use uobject pointersShamir Rabinovitch7-36/+39
Having uobject pointer embedded in ib core objects is not aligned with a future shared ib_x model. The resource tracker only does this to keep track of user/kernel objects - track this directly instead. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18IB/mlx5: Add advise_mr() supportMoni Shoua4-9/+157
The verb advise_mr() is used to give advice to the kernel about an address range that belongs to a MR. Implement the verb and register it on the device. The current implementation supports the only known advice to date, prefetch. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18IB/uverbs: Add support to advise_mrMoni Shoua1-1/+55
Add new ioctl method for the MR object - ADVISE_MR. This command can be used by users to give an advice or directions to the kernel about an address range that belongs to memory regions. A new ib_device callback, advise_mr(), is introduced here to suupport the new command. This command takes the following arguments: - pd: The protection domain to which all memory regions belong - advice: The type of the advice * IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH - Pre-fetch a range of an on-demand paging MR * IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH_WRITE - Pre-fetch a range of an on-demand paging MR with write intention - flags: The properties of the advice * IB_UVERBS_ADVISE_MR_FLAG_FLUSH - Operation must end before return to the caller - sg_list: The list of memory ranges - num_sge: The number of memory ranges in the list - attrs: More attributes to be parsed by the provider Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18IB/uverbs: Add helper to get array size from ptr attributeMoni Shoua1-7/+5
When the parser of an ioctl command has the knowledge that a ptr attribute in a bundle represents an array of structures, it is useful for it to know the number of elements in the array. This is done by dividing the attribute length with the element size. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/uverbs: Add an ioctl method to destroy an objectParav Pandit2-7/+63
Add an ioctl method to destroy the PD, MR, MW, AH, flow, RWQ indirection table and XRCD objects by handle which doesn't require any output response during destruction. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/uverbs: Add a method to introspect handles in a contextJason Gunthorpe1-1/+88
Introduce a helper function gather_objects_handle() to copy object handles under a spin lock. Expose these objects handles via the uverbs ioctl interface. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-12-18IB/mlx4: Utilize macro to calculate SQ spare sizeYuval Shaia1-1/+1
The macro MLX4_IB_SQ_HEADROOM calculates the spare room needed to be left. Use it instead of hard-coding the HW prefetch size. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/hns: Fix an error code in hns_roce_create_srq()Dan Carpenter1-0/+1
The function accidentally returns success on this error path. Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18IB/qib: Fix an error code in qib_sdma_verbs_send()Dan Carpenter1-1/+3
We accidentally return success on this error path. Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/core: Delete RoCE GID in hw when corresponding IP is deletedParav Pandit1-4/+3
Currently a RoCE GID entry is removed from the hardware when all references to the GID entry drop to zero. This is a change in behavior from before the fixed patch. The GID entry should be removed from the hardware when GID entry deletion is requested. This allows the driver terminate ongoing traffic through the RoCE GID. While a GID is deleted from the hardware, GID slot in the software GID cache is not freed. GID slot is freed once all references of such GID are dropped. This continue to ensure that such GID slot of hardware is not allocated to new GID entry allocation request. It is allocated once all references to GID entry drop. This approach allows drivers to put a tombestone of some kind on the HW GID index to block the traffic. Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/mlx5: Fix function name typo 'fileds' -> 'fields'Gal Pressman1-4/+4
Fix typo in 'set_mr_fileds' -> 'set_mr_fields'. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/i40iw: Make sure to initialize ib_device_opsKamal Heib1-0/+1
The initialization of the ib_device_ops was dropped by mistake when rebasing the ib_device_ops series, this patch fixes that. Fixes: 15644f57cb66 ("RDMA/i40iw: Initialize ib_device_ops struct") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/mlx5: Delete unreachable handle_atomic code by simplifying SW completionLeon Romanovsky3-100/+5
Handle atomic was left as unimplemented from 2013, remove the code till this part will be developed. Remove the dead code by simplifying SW completion logic which is supposed to be the same for send and receive paths. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # compile tested Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-18RDMA/uverbs: Implement an ioctl that can call write and write_ex handlersJason Gunthorpe7-23/+89
Now that the handlers do not process their own udata we can make a sensible ioctl that wrappers them. The ioctl follows the same format as the write_ex() and has the user explicitly specify the core and driver in/out opaque structures and a command number. This works for all forms of write commands. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-14net/mlx5: Make RoCE and SR-IOV LAG modes explicitAviv Heller3-6/+10
With the introduction of SR-IOV LAG, checking whether LAG is active is no longer good enough, since RoCE and SR-IOV LAG each entails different behavior by both the core and infiniband drivers. This patch introduces facilities to discern LAG type, in addition to mlx5_lag_is_active(). These are implemented in such a way as to allow more complex mode combinations in the future. Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14Merge branch 'mlx5-next' of ↵Saeed Mahameed3-22/+19
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5-next shared branch with rdma subtree to avoid mlx5 rdma v.s. netdev conflicts. Highlights: 1) Lag refactroing and flow counter affinity bits. 2) mlx5 core cleanups By Roi Dayan (2) and others * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Fold the modify lag code into function net/mlx5: Add lag affinity info to log net/mlx5: Split the activate lag function into two routines net/mlx5: E-Switch, Introduce flow counter affinity IB/mlx5: Unify e-switch representors load approach between uplink and VFs net/mlx5: Use lowercase 'X' for hex values net/mlx5: Remove duplicated include from eswitch.c Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14IB/mlx5: Unify e-switch representors load approach between uplink and VFsMark Bloch3-22/+19
When in switchdev mode and the add function is called by the core level driver, make sure we only register the callbacks, but don't create the mlx5 IB device or initialize anything. With this change all the IB devices in switchdev mode are created only once the load callback is invoked by the e-switch core sub-module. This follows the design paradigm under which the all the Eth representors must be loaded before any of IB reprs is loaded. Signed-off-by: Mark Bloch <markb@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-12IB/core: Fix oops in netdev_next_upper_dev_rcu()Mark Zhang1-0/+3
When support for bonding of RoCE devices was added, there was necessarily a link between the RoCE device and the paired netdevice that was part of the bond. If you remove the mlx4_en module, that paired association is broken (the RoCE device is still present but the paired netdevice has been released). We need to account for this in is_upper_ndev_bond_master_filter() and filter out those links with a broken pairing or else we later oops in netdev_next_upper_dev_rcu(). Fixes: 408f1242d940 ("IB/core: Delete lower netdevice default GID entries in bonding scenario") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-12RDMA: Start use ib_device_opsKamal Heib32-317/+330
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/rdmavt: Initialize ib_device_ops structKamal Heib1-245/+54
Initialize ib_device_ops with the supported operations using ib_set_device_ops() and remove the use of check_driver_override(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/rxe: Initialize ib_device_ops structKamal Heib1-43/+47
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/vmw_pvrdma: Initialize ib_device_ops structKamal Heib1-37/+45
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/usnic: Initialize ib_device_ops structKamal Heib1-29/+32
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/qib: Initialize ib_device_ops structKamal Heib1-2/+6
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/qedr: Initialize ib_device_ops structKamal Heib1-51/+52
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/ocrdma: Initialize ib_device_ops structKamal Heib1-46/+46
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/nes: Initialize ib_device_ops structKamal Heib1-32/+35
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/mthca: Initialize ib_device_ops structKamal Heib1-51/+88
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/mlx5: Initialize ib_device_ops structKamal Heib1-96/+131
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/mlx4: Initialize ib_device_ops structKamal Heib1-79/+99
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/i40iw: Initialize ib_device_ops structKamal Heib1-30/+33
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/hns: Initialize ib_device_ops structKamal Heib4-58/+87
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/hfi1: Initialize ib_device_ops structKamal Heib1-7/+11
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/cxgb4: Initialize ib_device_ops structKamal Heib1-35/+39
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/cxgb3: Initialize ib_device_ops structKamal Heib1-30/+34
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/bnxt_re: Initialize ib_device_ops structKamal Heib1-51/+45
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/core: Introduce ib_device_opsKamal Heib1-0/+98
This change introduces the ib_device_ops structure that defines all the InfiniBand device operations in one place, so the code will be more readable and clean, unlike today when the ops are mixed with ib_device data members. The providers will need to define the supported operations and assign them using ib_set_device_ops(), that will also make the providers code more readable and clean. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11IB/mlx4: Remove unneeded NULL checkYuval Shaia1-3/+3
NULL check for kfree is unnecessary, remove it. Fixes: b42dde478bca ("IB/mlx4: Rework special QP creation error path") Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/ocrdma: Use PCI-ID as an identification in debugfsLeon Romanovsky1-2/+3
In opposite to current implementation of identification based on device name, PCI-ID identification provides stable names suitable for device rename. Change ocrdma debugfs representation to use PCI-ID. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-11RDMA/uverbs: Optimize clearing of extra bytes in responseLeon Romanovsky1-6/+8
Clear extra bytes in response in batch manner instead of doing it per-byte. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Powered by cgit, Gruvboxed by Blaster4385.