Age | Commit message (Collapse) | Author | Files | Lines |
|
A shift-out-bounds may occur, if the max_inline_data has not been set.
The related log:
UBSAN: shift-out-of-bounds in kernel/include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
Call trace:
dump_backtrace+0xb0/0x118
show_stack+0x20/0x38
dump_stack_lvl+0xbc/0x120
dump_stack+0x1c/0x28
__ubsan_handle_shift_out_of_bounds+0x104/0x240
set_ext_sge_param+0x40c/0x420 [hns_roce_hw_v2]
hns_roce_create_qp+0xf48/0x1c40 [hns_roce_hw_v2]
create_qp.part.0+0x294/0x3c0
ib_create_qp_kernel+0x7c/0x150
create_mad_qp+0x11c/0x1e0
ib_mad_init_device+0x834/0xc88
add_client_context+0x248/0x318
enable_device_and_get+0x158/0x280
ib_register_device+0x4ac/0x610
hns_roce_init+0x890/0xf98 [hns_roce_hw_v2]
__hns_roce_hw_v2_init_instance+0x398/0x720 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0x108/0x1e0 [hns_roce_hw_v2]
hclge_init_roce_client_instance+0x1a0/0x358 [hclge]
hclge_init_client_instance+0xa0/0x508 [hclge]
hnae3_register_client+0x18c/0x210 [hnae3]
hns_roce_hw_v2_init+0x28/0xff8 [hns_roce_hw_v2]
do_one_initcall+0xe0/0x510
do_init_module+0x110/0x370
load_module+0x2c6c/0x2f20
init_module_from_file+0xe0/0x140
idempotent_init_module+0x24c/0x350
__arm64_sys_finit_module+0x88/0xf8
invoke_syscall+0x68/0x1a0
el0_svc_common.constprop.0+0x11c/0x150
do_el0_svc+0x38/0x50
el0_svc+0x50/0xa0
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x1a4/0x1a8
Fixes: 0c5e259b06a8 ("RDMA/hns: Fix incorrect sge nums calculation")
Signed-off-by: Chengchang Tang <[email protected]>
Signed-off-by: Junxian Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
The offset requires 128B alignment and the page size ranges from
4K to 128M.
Fixes: 68a997c5d28c ("RDMA/hns: Add FRMR support for hip08")
Signed-off-by: Chengchang Tang <[email protected]>
Signed-off-by: Junxian Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
The hw ctx should be destroyed when init eq table fails.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Junxian Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
CEQEs are handled in interrupt handler currently. This may cause the
CPU core staying in interrupt context too long and lead to soft lockup
under heavy load.
Handle CEQEs in BH workqueue and set an upper limit for the number of
CEQE handled by a single call of work handler.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: Junxian Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
8 bytes is the only supported length of atomic. Add this check in
set_rc_wqe(). Besides, stop processing WQEs and return from
set_rc_wqe() if there is any error.
Fixes: 384f88185112 ("RDMA/hns: Add atomic support")
Signed-off-by: Junxian Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Fix the problem of KASAN causing the stack frame size to increase
drivers/infiniband/hw/ocrdma/ocrdma_stats.c:686:16: error: stack frame size (20664) exceeds limit (8192) in 'ocrdma_dbgfs_ops_read' [-Werror,-Wframe-larger-than]
static ssize_t ocrdma_dbgfs_ops_read(struct file *filp, char __user *buffer,
^
Some functions called by ocrdma_dbgfs_ops_read occupy a lot of stack space.
Mark these functions as noinline_for_stack to prevent them from accumulating
in ocrdma_dbgfs_ops_read.
Signed-off-by: Peng Hao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
usnic_uiom_alloc_pd() allocates a paging domain for a given device.
In this case, iommu_domain_alloc(dev->bus) is equivalent to
iommu_paging_domain_alloc(dev). Replace it as iommu_domain_alloc()
has been deprecated.
Signed-off-by: Lu Baolu <[email protected]>
Acked-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
The name_assign_type indicates how the name is provided. Currently
these types are supported:
- RDMA_NAME_ASSIGN_TYPE_UNKNOWN: Unknown or not set;
- RDMA_NAME_ASSIGN_TYPE_USER: Name is provided by the user; The
user-created sub device, rxe and siw device has this type.
When filling nl device info, it is set in the new attribute
RDMA_NLDEV_ATTR_NAME_ASSIGN_TYPE. User-space tools like udev
"rdma_rename" could check this attribute to determine if this
device needs to be renamed or not.
Signed-off-by: Mark Zhang <[email protected]>
Link: https://lore.kernel.org/r/522591bef9a369cc8e5dcb77787e017bffee37fe.1719837610.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Reduce nodename string size to fit IB_DEVICE_NODE_DESC_MAX.
drivers/infiniband/hw/qib/qib_verbs.c: In function ‘qib_register_ib_device’:
drivers/infiniband/hw/qib/qib_verbs.c:1554:40: error: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size 43
[-Werror=format-truncation=]
1554 | "Intel Infiniband HCA %s", init_utsname()->nodename);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_verbs.c:1553:9: note: ‘snprintf’ output between 22 and 86 bytes into a destination of size 64
1553 | snprintf(ibdev->node_desc, sizeof(ibdev->node_desc),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1554 | "Intel Infiniband HCA %s", init_utsname()->nodename);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/1fb6393fa2e0702fef995834c3c7db972bbc4d06.1719837715.git.leon@kernel.org
Acked-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
drivers/infiniband/hw/qib/qib_init.c: In function ‘qib_init_one’:
drivers/infiniband/hw/qib/qib_init.c:586:67: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 3 [-Werror=format-truncation=]
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~
In function ‘qib_create_workqueues’,
inlined from ‘qib_init_one’ at drivers/infiniband/hw/qib/qib_init.c:1438:8:
drivers/infiniband/hw/qib/qib_init.c:586:60: note: directive argument in the range [-2147483643, 254]
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~~~~~~~~~
drivers/infiniband/hw/qib/qib_init.c:586:25: note: ‘snprintf’ output between 7 and 27 bytes into a destination of size 8
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
587 | dd->unit, pidx);
| ~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/ab5222c414a01e9d2c5129ef26836aace9ee2aa5.1719837715.git.leon@kernel.org
Acked-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Add support for 0xefa3 devices.
Reviewed-by: Yonatan Nachum <[email protected]>
Reviewed-by: Yossi Leybovich <[email protected]>
Signed-off-by: Michael Margolin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Supports per-plane port counters by querying PPCNT register with the
"extended port counters" group, as the query_vport_counter command
doesn't support plane ports.
Signed-off-by: Mark Zhang <[email protected]>
Link: https://lore.kernel.org/r/06ffb582d67159b7def4654c8272d3d6e8bd2f2f.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Support the new "plane_ind" field when querying port PTYS registers.
This is needed when querying the rate of a plane port.
Signed-off-by: Mark Zhang <[email protected]>
Link: https://lore.kernel.org/r/1f703c36306aa46917fcd88eadbb23b3e380d526.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
This patch supports driver APIs "add_sub_dev" and "del_sub_dev", to
add and delete a plane device respectively.
A mlx5 plane device is a rdma SMI device; It provides the SMI capability
through user MAD for it's parent, the logical multi-plane aggregated
device. For a plane port:
- It supports QP0 only;
- When adding a plane device, all plane ports are added;
- For some commands like mad_ifc, both plane_index and native portnum
is needed;
- When querying or modifying a plane port context, the native portnum
must be used, as the query/modify_hca_vport_context command doesn't
support plane port.
Signed-off-by: Mark Zhang <[email protected]>
Link: https://lore.kernel.org/r/e933cd0562aece181f8657af2ca0f5b387d0f14e.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
When multi-plane is supported, a logical port, which is aggregation of
multiple physical plane ports, is exposed for data transmission.
Compared with a normal mlx5 IB port, this logical port supports all
functionalities except Subnet Management.
Signed-off-by: Mark Zhang <[email protected]>
Link: https://lore.kernel.org/r/7e37c06c9cb243be9ac79930cd17053903785b95.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
If the HW register read fails, the FIFO will be always shown as
full. DB moderation doesn't work in that case and the traffic fails.
So disable this feature and log a message.
Signed-off-by: Selvin Xavier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Enable DB moderation support for GenP7 adapters also. Query from FW
and update the status.
Signed-off-by: Chandramohan Akula <[email protected]>
Signed-off-by: Ajit Khaparde <[email protected]>
Signed-off-by: Selvin Xavier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
GenP5 and P7 devices have different DB FIFO depth. Use different
values based on the chip context.
Instead of hardcoding doorbell FIFO related values, get it
from the HWRM interface. Maintain backward compatibility
by having default values when FW is not providing the doorbell
FIFO related values.
Signed-off-by: Chandramohan Akula <[email protected]>
Signed-off-by: Ajit Khaparde <[email protected]>
Signed-off-by: Selvin Xavier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Add UAR page index as a driver ioctl attribute to increase the number of
supported indices, previously limited to 16 bits by mlx5_ib_create_cq
struct.
Link: https://lore.kernel.org/r/0e18b34d7ec3b1ae02d694b0d545aed7413c0ef7.1719512393.git.leon@kernel.org
Signed-off-by: Akiva Goldberger <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Changes the create_cq verb signature by sending the entire uverbs attr
bundle as a parameter. This allows drivers to send driver specific attrs
through ioctl for the create_cq verb and access them in their driver
specific code.
Also adds a new enum value for driver specific ioctl attributes for
methods already supporting UHW.
Link: https://lore.kernel.org/r/ed147343987c0d43fd391c1b2f85e2f425747387.1719512393.git.leon@kernel.org
Signed-off-by: Akiva Goldberger <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We have the same macro in main and verbs files and we don't use the macro
in the verbs file, remove it.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Yossi Leybovich <[email protected]>
Signed-off-by: Yonatan Nachum <[email protected]>
Signed-off-by: Michael Margolin <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Use offset_in_page() instead of open-coding it.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Yossi Leybovich <[email protected]>
Reviewed-by: Firas Jahjah <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Michael Margolin <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
'struct mmu_rb_ops' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
10879 164 0 11043 2b23 drivers/infiniband/hw/hfi1/pin_system.o
After:
=====
text data bss dec hex filename
10907 140 0 11047 2b27 drivers/infiniband/hw/hfi1/pin_system.o
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/b826dd05eefa5f4d6a7a1b4d191eaf37c714ed04.1719259997.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
drivers/infiniband/hw/mlx4/alias_GUID.c: In function ‘mlx4_ib_init_alias_guid_service’:
drivers/infiniband/hw/mlx4/alias_GUID.c:878:74: error: ‘%d’ directive
output may be truncated writing between 1 and 11 bytes into a region of
size 5 [-Werror=format-truncation=]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:63: note: directive argument in the range [-2147483641, 2147483646]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:17: note: ‘snprintf’ output
between 12 and 22 bytes into a destination of size 15
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism")
Link: https://lore.kernel.org/r/1951c9500109ca7e36dcd523f8a5f2d0d2a608d1.1718554641.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Increase size of the name array to avoid truncated output warning.
drivers/infiniband/hw/mlx4/mad.c: In function ‘mlx4_ib_alloc_demux_ctx’:
drivers/infiniband/hw/mlx4/mad.c:2197:47: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 4
[-Werror=format-truncation=]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2197:38: note: directive argument in
the range [-2147483645, 2147483647]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2197:9: note: ‘snprintf’ output between
10 and 20 bytes into a destination of size 12
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2205:38: note: directive argument in
the range [-2147483645, 2147483647]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2213:38: note: directive argument in
the range [-2147483645, 2147483647]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/hw/mlx4/mad.o] Error 1
Fixes: fc06573dfaf8 ("IB/mlx4: Initialize SR-IOV IB support for slaves in master context")
Link: https://lore.kernel.org/r/f3798b3ce9a410257d7e1ec7c9e285f1352e256a.1718554569.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Ignore optional ib_access_flags when an MR is created.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <[email protected]>
Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Fix unwind flow as part of mlx5_ib_stage_init_init to use the correct
goto upon an error.
Fixes: 758ce14aee82 ("RDMA/mlx5: Implement MACsec gid addition and deletion")
Signed-off-by: Yishai Hadas <[email protected]>
Reviewed-by: Patrisious Haddad <[email protected]>
Link: https://lore.kernel.org/r/aa40615116eda14ec9eca21d52017d632ea89188.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
cachable and mmkey.rb_key together are used by mlx5_revoke_mr() to put the
MR/mkey back into the cache. In all cases they should be set correctly.
alloc_cacheable_mr() was setting cachable but not filling rb_key,
resulting in cache_ent_find_and_store() bucketing them all into a 0 length
entry.
implicit_get_child_mr()/mlx5_ib_alloc_implicit_mr() failed to set cachable
or rb_key at all, so the cache was not working at all for implicit ODP.
Cc: [email protected]
Fixes: 8c1185fef68c ("RDMA/mlx5: Change check for cacheable mkeys")
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/7778c02dfa0999a30d6746c79a23dd7140a9c729.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
When a cache ent already exists but doesn't have any mkeys in it the cache
will automatically create a new one based on the specification in the
ent->rb_key.
ent->ats was missed when creating the new key and so ma_translation_mode
was not being set even though the ent requires it.
Cc: [email protected]
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Michael Guralnik <[email protected]>
Link: https://lore.kernel.org/r/7c5613458ecb89fbe5606b7aa4c8d990bdea5b9a.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
The below commit lifted the locking out of this function but left this
error path unlock behind resulting in unbalanced locking. Remove the
missed unlock too.
Cc: [email protected]
Fixes: 627122280c87 ("RDMA/mlx5: Add work to remove temporary entries from the cache")
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Michael Guralnik <[email protected]>
Link: https://lore.kernel.org/r/78090c210c750f47219b95248f9f782f34548bb1.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Patrisious Haddad <[email protected]>
Link: https://lore.kernel.org/r/250466af94f4989d638fab168e246035530e912f.1718301543.git.leon@kernel.org
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Set the mkey for dmabuf at PAGE_SIZE to support any SGL
after a move operation.
ib_umem_find_best_pgsz returns 0 on error, so it is
incorrect to check the returned page_size against PAGE_SIZE
Fixes: 90da7dc8206a ("RDMA/mlx5: Support dma-buf based userspace memory region")
Signed-off-by: Chiara Meiohas <[email protected]>
Reviewed-by: Michael Guralnik <[email protected]>
Link: https://lore.kernel.org/r/1e2289b9133e89f273a4e68d459057d032cbc2ce.1718301631.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Previously, all IB dev resources are initialized on driver load. As
they are not always used, move the initialization to the time when
they are needed.
To be more specific, move PD (p0) and CQ (c0) initialization to the
time when the first SRQ is created. and move SRQs(s0 and s1)
initialization to the time first QP is created. To avoid concurrent
creations, two new mutexes are also added.
Signed-off-by: Jianbo Liu <[email protected]>
Link: https://lore.kernel.org/r/98c3e53a8cc0bdfeb6dec6e5bb8b037d78ab00d8.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
UMR QP is not used in some cases, so move QP and its CQ creations from
driver load flow to the time first reg_mr occurs, that is when MR
interfaces are first called.
The initialization of dev->umrc.pd and dev->umrc.lock is still done in
driver load because pd is needed for mlx5_mkey_cache_init and the lock
is reused to protect against the concurrent creation.
When testing 4G bytes memory registration latency with rtool [1] and 8
threads in parallel, there is minor performance degradation (<5% for
the max latency) is seen for the first reg_mr with this change.
Link: https://github.com/paravmellanox/rtool [1]
Signed-off-by: Jianbo Liu <[email protected]>
Link: https://lore.kernel.org/r/55d3c4f8a542fd974d8a4c5816eccfb318a59b38.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
From: Leon Romanovsky <[email protected]>
Internal mlx5_ib resources are created during mlx5_ib module load. This
behavior is not optimal because it consumes resources that are not
needed when SFs are created. This patch series delays the creation of
mlx5_ib internal resources to the stage when they actually used.
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
The test of write combining was added before in mlx5_ib driver. It
opens UD QP and posts NOP WQEs, and uses BlueFlame doorbell. When
BlueFlame is used, WQEs get written directly to a PCI BAR of the
device (in addition to memory) so that the device handles them without
having to access memory.
In this test, the WQEs written in memory are different from the ones
written to the BlueFlame which request CQE update. By checking the
completion reports posted on CQ, we can know if BlueFlame succeeds or
not. The write combining must be supported if BlueFlame succeeds as
its register is written using write combining.
This patch reimplements the test in the same way, but using a pair of
SQ and CQ only. It is moved to mlx5_core as a general feature used by
both mlx5_core and mlx5_ib.
Besides, save write combine test result of the PCI function, so that
its thousands of child functions such as SF can query without paying
the time and resource penalty by itself. The test function is called
only after failing to get the cached result. With this enhancement,
all thousands of SFs of the PF attached to same driver no longer need
to perform WC check explicitly, which is already done in the system.
This saves several commands per SF, thereby speeds up SF creation and
also saves completion EQ creation.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Link: https://lore.kernel.org/r/4ff5a8cc4c5b5b0d98397baa45a5019bcdbf096e.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Leon Romanovsky says:
====================
net: mana: Allow variable size indirection table
Like we talked, I created new shared branch for this patch:
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git/log/?h=mana-shared
* 'mana-shared' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
net: mana: Allow variable size indirection table
====================
Link: https://lore.kernel.org/all/20240612183051.GE4966@unreal
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Allow variable size indirection table allocation in MANA instead
of using a constant value MANA_INDIRECT_TABLE_SIZE.
The size is now derived from the MANA_QUERY_VPORT_CONFIG and the
indirection table is allocated dynamically.
Signed-off-by: Shradha Gupta <[email protected]>
Link: https://lore.kernel.org/r/1718015319-9609-1-git-send-email-shradhagupta@linux.microsoft.com
Reviewed-by: Dexuan Cui <[email protected]>
Reviewed-by: Haiyang Zhang <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Process QP fatal events from the error event queue.
For that, find the QP, using QPN from the event, and then call its
event_handler. To find the QPs, store created RC QPs in an xarray.
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Wei Hu <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Fill in properties of the ib device.
Order the assignment in the order of fields in the struct ib_device_attr.
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Long Li <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Use the mac address for the node_guid of the IB device.
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Long Li <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Do not try to handle admin command completion if it has an unexpected
command id and print a relevant error message.
Reviewed-by: Firas Jahjah <[email protected]>
Reviewed-by: Yehuda Yitschak <[email protected]>
Signed-off-by: Michael Margolin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Implement modify QP state for RC QPs.
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Long Li <[email protected]>
Reviewed-by: Zhu Yanjun <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Implement user requests to create and destroy an RC QP.
As the user does not have an FMR queue, it is skipped and NO_FMR flag
is used.
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Zhu Yanjun <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
Implement HW requests to create and destroy an RC QP.
An RC QP may have 5 queues.
Signed-off-by: Konstantin Taranov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Long Li <[email protected]>
Reviewed-by: Zhu Yanjun <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
irdma_qvlist_info
'num_vectors' is used to count the number of elements in the 'qv_info'
flexible array in "struct irdma_qvlist_info".
So annotate it with __counted_by() to make it explicit and enable some
additional checks.
This allocation is done in irdma_save_msix_info().
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/2ca8b14adf79c4795d7aa95bbfc79253a6bfed82.1716102112.git.christophe.jaillet@wanadoo.fr
Acked-by: Shiraz Saleem <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|
|
In case any of PCI BARs is missing during device probe we would like to
fail as early as possible. Fail if any of the required BARs isn't listed
as a memory BAR.
Reviewed-by: Daniel Kranzdorf <[email protected]>
Reviewed-by: Firas Jahjah <[email protected]>
Signed-off-by: Michael Margolin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
|