aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)AuthorFilesLines
2016-09-16Merge tag 'for-linus' of ↵Linus Torvalds6-26/+64
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Round three of 4.8 rc fixes. This is likely the last rdma pull request this cycle. The new rxe driver had a few issues (you probably saw the boot bot bug report) and they should be addressed now. There are a couple other fixes here, mainly mlx4. There are still two outstanding issues that need resolved but I don't think their fix will make this kernel cycle. Summary: - Various fixes to rdmavt, ipoib, mlx5, mlx4, rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/rdmavt: Don't vfree a kzalloc'ed memory region IB/rxe: Fix kmem_cache leak IB/rxe: Fix race condition between requester and completer IB/rxe: Fix duplicate atomic request handling IB/rxe: Fix kernel panic in udp_setup_tunnel IB/mlx5: Set source mac address in FTE IB/mlx5: Enable MAD_IFC commands for IB ports only IB/mlx4: Diagnostic HW counters are not supported in slave mode IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV IB/mlx4: Fix code indentation in QP1 MAD flow IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV IB/ipoib: Don't allow MC joins during light MC flush IB/rxe: fix GFP_KERNEL in spinlock context
2016-09-16IB/mlx5: Set source mac address in FTEMaor Gottlieb1-0/+7
Set the source mac address in the FTE when L2 specification is provided. Fixes: 038d2ef87572 ('IB/mlx5: Add flow steering support') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx5: Enable MAD_IFC commands for IB ports onlyNoa Osherovich1-1/+3
MAD_IFC command is supported only for physical functions (PF) and when physical port is IB. The proposed fix enforces it. Fixes: d603c809ef91 ("IB/mlx5: Fix decision on using MAD_IFC") Reported-by: David Chang <dchang@suse.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Diagnostic HW counters are not supported in slave modeKamal Heib1-0/+3
Modify the mlx4_ib_diag_counters() to avoid the following error in the hypervisor when the slave tries to query the hardware counters in SR-IOV mode. mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1 Fixes: 3f85f2aaabf7 ("IB/mlx4: Add diagnostic hardware counters") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOVJack Morgenstein3-3/+27
When sending QP1 MAD packets which use a GRH, the source GID (which consists of the 64-bit subnet prefix, and the 64 bit port GUID) must be included in the packet GRH. For SR-IOV, a GID cache is used, since the source GID needs to be the slave's source GID, and not the Hypervisor's GID. This cache also included a subnet_prefix. Unfortunately, the subnet_prefix field in the cache was never initialized (to the default subnet prefix 0xfe80::0). As a result, this field remained all zeroes. Therefore, when SR-IOV was active, all QP1 packets which included a GRH had a source GID subnet prefix of all-zeroes. However, the subnet-prefix should initially be 0xfe80::0 (the default subnet prefix). In addition, if OpenSM modifies a port's subnet prefix, the new subnet prefix must be used in the GRH when sending QP1 packets. To fix this we now initialize the subnet prefix in the SR-IOV GID cache to the default subnet prefix. We update the cached value if/when OpenSM modifies the port's subnet prefix. We take this cached value when sending QP1 packets when SR-IOV is active. Note that the value is stored as an atomic64. This eliminates any need for locking when the subnet prefix is being updated. Note also that we depend on the FW generating the "port management change" event for tracking subnet-prefix changes performed by OpenSM. If running early FW (before 2.9.4630), subnet prefix changes will not be tracked (but the default subnet prefix still will be stored in the cache; therefore users who do not modify the subnet prefix will not have a problem). IF there is a need for such tracking also for early FW, we will add that capability in a subsequent patch. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Fix code indentation in QP1 MAD flowJack Morgenstein1-17/+19
The indentation in the QP1 GRH flow in procedure build_mlx_header is really confusing. Fix it, in preparation for a commit which touches this code. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOVAlex Vesker1-7/+7
Because of an incorrect bit-masking done on the join state bits, when handling a join request we failed to detect a difference between the group join state and the request join state when joining as send only full member (0x8). This caused the MC join request not to be sent. This issue is relevant only when SRIOV is enabled and SM supports send only full member. This fix separates scope bits and join states bits a nibble each. Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds3-1/+11
Pull block fixes from Jens Axboe: "A set of fixes for the current series in the realm of block. Like the previous pull request, the meat of it are fixes for the nvme fabrics/target code. Outside of that, just one fix from Gabriel for not doing a queue suspend if we didn't get the admin queue setup in the first place" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-rdma: add back dependency on CONFIG_BLOCK nvme-rdma: fix null pointer dereference on req->mr nvme-rdma: use ib_client API to detect device removal nvme-rdma: add DELETING queue flag nvme/quirk: Add a delay before checking device ready for memblaze device nvme: Don't suspend admin queue that wasn't created nvme-rdma: destroy nvme queue rdma resources on connect failure nvme_rdma: keep a ref on the ctrl during delete/flush iw_cxgb4: block module unload until all ep resources are released iw_cxgb4: call dev_put() on l2t allocation failure
2016-09-13Merge branch 'nvmf-4.8-rc' of git://git.infradead.org/nvme-fabrics into ↵Jens Axboe3-1/+11
for-linus Sagi writes: Here we have: - Kconfig dependencies fix from Arnd - nvme-rdma device removal fixes from Steve - possible bad deref fix from Colin
2016-09-04iw_cxgb4: block module unload until all ep resources are releasedSteve Wise3-0/+8
Otherwise an endpoint can be still closing down causing a touch after free crash. Also WARN_ON if ulps have failed to destroy various resources during device removal. Fixes: ad61a4c7a9b7 ("iw_cxgb4: don't block in destroy_qp awaiting the last deref") Reviewed-by: Sagi Grimberg <sagi@grimbrg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-04iw_cxgb4: call dev_put() on l2t allocation failureSteve Wise1-1/+3
Reviewed-by: Sagi Grimberg <sagi@grimbrg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-02IB/hfi1: Rework debugfs to use SRCUMike Marciniszyn1-80/+52
The debugfs RCU trips many debug kernel warnings because of potential sleeps with an RCU read lock held. This includes both user copy calls and slab allocations throughout the file. This patch switches the RCU to use SRCU for file remove/access race protection. In one case, the SRCU is implicit in the use of the raw debugfs file object and just works. In the seq_file case, a wrapper around seq_read() and seq_lseek() is used to enforce the SRCU using the debugfs supplied functions debugfs_use_file_start() and debugfs_use_file_stop(). The sychronize_rcu() is deleted since the SRCU prevents the remove access race. The RCU locking is kept for qp_stats since the QP hash list is protected using the non-sleepable RCU. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/hfi1: Make n_krcvqs be an unsigned long integerHarish Chegondi3-5/+5
The global variable n_krcvqs stores the sum of the number of kernel receive queues of VLs 0-7 which the user can pass to the driver through the module parameter array krcvqs which is of type unsigned integer. If the user passes large value(s) into krcvqs parameter array, it can cause an arithmetic overflow while calculating n_krcvqs which is also of type unsigned int. The overflow results in an incorrect value of n_krcvqs which can lead to kernel crash while loading the driver. Fix by changing the data type of n_krcvqs to unsigned long. This patch also changes the data type of other variables that get their values from n_krcvqs. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/hfi1: Add QSFP sanity pre-checkDean Luick4-8/+82
Sometimes a QSFP device does not respond in the expected time after a power-on. Add a read pre-check/retry when starting the link on driver load. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/hfi1: Fix AHG KDETH Intr shiftJubin John1-1/+4
In the set_txreq_header_ahg(), The KDETH Intr bit is obtained from the header in the user sdma request using a KDETH_GET shift and mask macro. This value is then futher right shifted by 16 causing us to lose the value i.e it is shifted to zero, leading to the following smatch warning: drivers/infiniband/hw/hfi1/user_sdma.c:1482 set_txreq_header_ahg() warn: mask and shift to zero The Intr bit should be left shifted into its correct position in the KDETH header before the AHG update. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/hfi1: Fix SGE length for misaligned PIO copySebastian Sanchez1-0/+12
When trying to align the source pointer and there's a byte carry in an SGE copy, bytes are borrowed from the next quad-word X to complete the required quad-word copy. Then, the SGE length is reduced by the number of borrowed bytes. After this, if the remaining number of bytes from quad-word X (extra bytes) is greater than the new SGE length, the number of extra bytes needs to be updated to the new SGE length. Otherwise, when the SGE length gets updated again after the extra bytes are read to create the new byte carry, it goes negative, which then becomes a very large number as the SGE length is an unsigned integer. This causes SGE buffer to be over-read. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/mlx5: Don't return errors from poll_cqLeon Romanovsky1-20/+2
Remove returning errors from mlx5 poll_cq function. Polling CQ operation in kernel never fails by Mellanox HCA architecture and respective driver design. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/mlx5: Use TIR number based on selectorYishai Hadas3-1/+7
Use TIR number based on selector, it should be done to differentiate between RSS QP to RAW one. Reported-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Tested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/mlx5: Simplify code by removing return variableLeon Romanovsky1-7/+3
Return variable was set in a line before the actual return was called in begin_wqe function. This patch removes such variable and simplifies the code. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/mlx5: Return EINVAL when caller specifies too many SGEsChuck Lever1-1/+1
The returned value should be EINVAL, because it is caused by wrong caller and not by internal overflow event. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/mlx4: Don't return errors from poll_cqLeon Romanovsky1-24/+2
Remove returning errors from mlx4 poll_cq function. Polling CQ operation in kernel never fails by Mellanox HCA architecture and respective driver design. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02Revert "IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one"Leon Romanovsky1-3/+3
By Mellanox HW design and SW implementation, poll_cq never fails and returns errors, so all these printks are to catch ULP bugs. In case of such bug, the reverted patch will cause reentry of the function, resulting in a printk storm. This reverts commit 5412352fcd8f ("IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/cxgb4: Make _free_qp static to silence build warningBaoyou Xie1-1/+1
We get 1 warning when build kernel with W=1: drivers/infiniband/hw/cxgb4/qp.c:686:6: warning: no previous prototype for '_free_qp' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/hfi1: Fix the size parameter to find_first_bitChristophe Jaillet1-4/+4
The 2nd parameter of 'find_first_bit' is the number of bits to search. In this case, we are passing 'sizeof(u64)' which is 8. It is likely that the number of bits of 'port_mask' was expected here. Use sizeof() * 8 to get the correct number. It has been spotted by the following coccinelle script: @@ expression ret, x; @@ * ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...)); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/mlx5: Fix the size parameter to find_first_bitChristophe Jaillet1-3/+3
The 2nd parameter of 'find_first_bit' is the number of bits to search. In this case, we are passing 'sizeof(tmp)' which is likely to be 4 or 8 because 'tmp' is an 'unsigned long'. It is likely that the number of bits of 'tmp' was expected here. So use BITS_PER_LONG instead. It has been spotted by the following coccinelle script: @@ expression ret, x; @@ * ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...)); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Majd Dibbiny <majd@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-26IB/hfi1: Clean up type used and castingChristophe Jaillet1-2/+2
In all other places in this file where 'find_first_bit' is called, port_num is defined as a 'u8' and no casting is done. Do the same here in order to be more consistent. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-26i40iw: Receive notification events correctlyShiraz Saleem1-5/+3
Device notifications are not received after the first interface is closed; since there is an unregister for notifications on every interface close. Correct this by unregistering for device notifications only when the last interface is closed. Also, make all operations on the i40iw_notifiers_registered atomic as it can be read/modified concurrently. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-26i40iw: Update hw_iwarp_stateMustafa Ismail1-0/+1
Update iwqp->hw_iwarp_state to reflect the new state of the CQP modify QP operation. This avoids reissuing a CQP operation to modify a QP to a state that it is already in. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-25i40iw: Send last streaming mode message for loopback connectionsTatyana Nikolova1-21/+1
Send a zero length last streaming mode message for loopback connections to synchronize between accepting QP and connecting QP. This avoids data transfer to start on the accepting QP before the connecting QP is in RTS. Also remove function i40iw_loopback_nop() as it is no longer used. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24RDMA/ocrdma: Fix the max_sge reported from FWSelvin Xavier3-13/+17
Current driver is reporting wrong values for max_sge and max_sge_rd in query_device. This breaks the nfs rdma and iser in some device profiles. Fixing the driver to report correct values from FW. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Avoid writing to freed memoryMustafa Ismail1-2/+1
iwpbl->iwmr points to the structure that contains iwpbl, which is iwmr. Setting this to NULL would result in writing to freed memory. So just free iwmr, and return. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Fix double free of allocated_bufferMustafa Ismail1-1/+0
Memory allocated for iwqp; iwqp->allocated_buffer is freed twice in the create_qp error path. Correct this by having it freed only once in i40iw_free_qp_resources(). Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24IB/mlx5: Remove superfluous include of io-mapping.hChris Wilson1-1/+0
This file does not use any structs or functions defined by io-mapping.h (nor does it directly use iomap, ioremap, iounamp or friends). Remove it to simplify verification of changes to io-mapping.h The include existed since its inception in commit e126ba97dba9edeb6fafa3665b5f8497fc9cdf8c Author: Eli Cohen <eli@mellanox.com> Date: Sun Jul 7 17:25:49 2013 +0300 mlx5: Add driver for Mellanox Connect-IB adapters which looks like a copy across from the Mellanox ethernet driver. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eli Cohen <eli@mellanox.com> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Matan Barak <matanb@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Do not set self-referencing pointer to NULL after kfreeMustafa Ismail1-1/+4
In i40iw_free_virt_mem(), do not set mem->va to NULL after freeing it as mem->va is a self-referencing pointer to mem. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-24i40iw: Add missing NULL check for MPA private dataShiraz Saleem1-2/+2
Add NULL check for pdata and pdata->addr before the memcpy in i40iw_form_cm_frame(). This fixes a NULL pointer de-reference which occurs when the MPA private data pointer is NULL. Also only copy pdata->size bytes in the memcpy to prevent reading past the length of the private data buffer provided by upper layer. Fixes: f27b4746f378 ("i40iw: add connection management code") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTSBharat Potnuri2-5/+10
Current cxgb4 arm CQ logic ignores IB_CQ_REPORT_MISSED_EVENTS for request completion notification on a CQ. Due to this ib_poll_handler() assumes all events polled and avoids further iopoll scheduling. This patch adds logic to cxgb4 ib_req_notify_cq() handler to check if CQ is not empty and return accordingly. Based on the return value of ib_req_notify_cq() handler, ib_poll_handler() will schedule a run of iopoll handler. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23i40iw: Add missing check for interface already openMustafa Ismail1-0/+4
In i40iw_open(), check if interface is already open and return success if it is. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23i40iw: Protect req_resource_num updateMustafa Ismail1-1/+1
In i40iw_alloc_resource(), ensure that the update to req_resource_num is protected by the lock. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23i40iw: Change mem_resources pointer to a u8Shiraz Saleem1-1/+1
iwdev->mem_resources is incorrectly defined as an unsigned long instead of u8. As a result, the offset into the dynamic allocated structures in i40iw_initialize_hw_resources() is incorrectly calculated and would lead to writing of memory regions outside of the allocated buffer. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-23IB/qib: Use memdup_user() rather than duplicating its implementationMarkus Elfring1-21/+5
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22iw_cxgb4: use the MPA initiator's IRD if < our ORDSteve Wise1-1/+1
The i40iw initiator sends an MPA-request with ird=16 and ord=16. The cxgb4 responder sends an MPA-reply with ord = 32 causing i40iw to terminate due to insufficient resources. The logic to reduce the ORD to <= peer's IRD was wrong. Reported-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22iw_cxgb4: limit IRD/ORD advertised to ULP by device max.Steve Wise1-0/+4
The i40iw initiator sends an MPA-request with ird = 63, ord = 63. The cxgb4 responder sends a RST. Since the inbound ord=63 and it exceeds the max_ird/c4iw_max_read_depth (=32 default), chelsio decides to abort. Instead, cxgb4 should adjust the ord/ird down before presenting it to the ULP. Reported-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Fix mm_struct use after freeIra Weiny1-0/+2
Testing with CONFIG_SLUB_DEBUG_ON=y resulted in the kernel panic below. This is the result of the mm_struct sometimes being free'd prior to hfi1_file_close being called. This was due to the combination of 2 reasons: 1) hfi1_file_close is deferred in process exit and it therefore may not be called synchronously with process exit. 2) exit_mm is called prior to exit_files in do_exit. Normally this is ok however, our kernel bypass code requires us to have access to the mm_struct for house keeping both at "normal" close time as well as at process exit. Therefore, the fix is to simply keep a reference to the mm_struct until we are done with it. [ 3006.340150] general protection fault: 0000 [#1] SMP [ 3006.346469] Modules linked in: hfi1 rdmavt rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod snd_hda_code c_realtek iTCO_wdt snd_hda_codec_generic iTCO_vendor_support sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass c rct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw snd_hda_intel gf128mul snd_hda_codec glue_helper snd_hda_core ablk_helper sn d_hwdep cryptd snd_seq snd_seq_device snd_pcm snd_timer snd soundcore pcspkr shpchp mei_me sg lpc_ich mei i2c_i801 mfd_core ioatdma ipmi_devi ntf wmi ipmi_si ipmi_msghandler acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 jbd2 mbcache mlx4_en ib_core sr_mod s d_mod cdrom crc32c_intel mgag200 drm_kms_helper syscopyarea sysfillrect igb sysimgblt fb_sys_fops ptp mlx4_core ttm isci pps_core ahci drm li bsas libahci dca firewire_ohci i2c_algo_bit scsi_transport_sas firewire_core crc_itu_t i2c_core libata [last unloaded: mlx4_ib] [ 3006.461759] CPU: 16 PID: 11624 Comm: mpi_stress Not tainted 4.7.0-rc5+ #1 [ 3006.469915] Hardware name: Intel Corporation W2600CR ........../W2600CR, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 3006.483027] task: ffff8804102f0040 ti: ffff8804102f8000 task.ti: ffff8804102f8000 [ 3006.491971] RIP: 0010:[<ffffffff810f0383>] [<ffffffff810f0383>] __lock_acquire+0xb3/0x19e0 [ 3006.501905] RSP: 0018:ffff8804102fb908 EFLAGS: 00010002 [ 3006.508447] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000001 RCX: 0000000000000000 [ 3006.517012] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880410b56a40 [ 3006.525569] RBP: ffff8804102fb9b0 R08: 0000000000000001 R09: 0000000000000000 [ 3006.534119] R10: ffff8804102f0040 R11: 0000000000000000 R12: 0000000000000000 [ 3006.542664] R13: ffff880410b56a40 R14: 0000000000000000 R15: 0000000000000000 [ 3006.551203] FS: 00007ff478c08700(0000) GS:ffff88042e200000(0000) knlGS:0000000000000000 [ 3006.560814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3006.567806] CR2: 00007f667f5109e0 CR3: 0000000001c06000 CR4: 00000000000406e0 [ 3006.576352] Stack: [ 3006.579157] ffffffff8124b819 ffffffffffffffff 0000000000000000 ffff8804102fb940 [ 3006.588072] 0000000000000002 0000000000000000 ffff8804102f0040 0000000000000007 [ 3006.596971] 0000000000000006 ffff8803cad6f000 0000000000000000 ffff8804102f0040 [ 3006.605878] Call Trace: [ 3006.609220] [<ffffffff8124b819>] ? uncharge_batch+0x109/0x250 [ 3006.616382] [<ffffffff810f2313>] lock_acquire+0xd3/0x220 [ 3006.623056] [<ffffffffa0a30bfc>] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.631593] [<ffffffff81775579>] down_write+0x49/0x80 [ 3006.638022] [<ffffffffa0a30bfc>] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.646569] [<ffffffffa0a30bfc>] hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.654898] [<ffffffffa0a2efb6>] cacheless_tid_rb_remove+0x106/0x330 [hfi1] [ 3006.663417] [<ffffffff810efd36>] ? mark_held_locks+0x66/0x90 [ 3006.670498] [<ffffffff817771f6>] ? _raw_spin_unlock_irqrestore+0x36/0x60 [ 3006.678741] [<ffffffffa0a2f1ee>] tid_rb_remove+0xe/0x10 [hfi1] [ 3006.686010] [<ffffffffa0a0c5d5>] hfi1_mmu_rb_unregister+0xc5/0x100 [hfi1] [ 3006.694387] [<ffffffffa0a2fcb9>] hfi1_user_exp_rcv_free+0x39/0x120 [hfi1] [ 3006.702732] [<ffffffffa09fc6ea>] hfi1_file_close+0x17a/0x330 [hfi1] [ 3006.710489] [<ffffffff81263e9a>] __fput+0xfa/0x230 [ 3006.716595] [<ffffffff8126400e>] ____fput+0xe/0x10 [ 3006.722696] [<ffffffff810b95c6>] task_work_run+0x86/0xc0 [ 3006.729379] [<ffffffff81099933>] do_exit+0x323/0xc40 [ 3006.735672] [<ffffffff8109a2dc>] do_group_exit+0x4c/0xc0 [ 3006.742371] [<ffffffff810a7f55>] get_signal+0x345/0x940 [ 3006.748958] [<ffffffff810340c7>] do_signal+0x37/0x700 [ 3006.755328] [<ffffffff8127872a>] ? poll_select_set_timeout+0x5a/0x90 [ 3006.763146] [<ffffffff811609cb>] ? __audit_syscall_exit+0x1db/0x260 [ 3006.770853] [<ffffffff8110f3e3>] ? rcu_read_lock_sched_held+0x93/0xa0 [ 3006.778765] [<ffffffff812347a4>] ? kfree+0x1e4/0x2a0 [ 3006.784986] [<ffffffff8108e75a>] ? exit_to_usermode_loop+0x33/0xac [ 3006.792551] [<ffffffff8108e785>] exit_to_usermode_loop+0x5e/0xac [ 3006.799907] [<ffffffff81003dca>] do_syscall_64+0x12a/0x190 [ 3006.806664] [<ffffffff81777a7f>] entry_SYSCALL64_slow_path+0x25/0x25 [ 3006.814396] Code: 24 08 44 89 44 24 10 89 4c 24 18 e8 a8 d8 ff ff 48 85 c0 8b 4c 24 18 44 8b 44 24 10 44 8b 4c 24 08 4c 8b 14 24 0f 84 30 08 00 00 <f0> ff 80 98 01 00 00 8b 3d 48 ad be 01 45 8b a2 90 0b 00 00 85 [ 3006.837158] RIP [<ffffffff810f0383>] __lock_acquire+0xb3/0x19e0 [ 3006.844401] RSP <ffff8804102fb908> [ 3006.851170] ---[ end trace b7b9f21cf06c27df ]--- [ 3006.927420] Kernel panic - not syncing: Fatal exception [ 3006.933954] Kernel Offset: disabled [ 3006.940961] ---[ end Kernel panic - not syncing: Fatal exception [ 3006.948249] ------------[ cut here ]------------ Fixes: 3faa3d9a308e ("IB/hfi1: Make use of mm consistent") Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Improve J_KEY generationMitko Haralanov1-1/+18
Previously, J_KEY generation was based on the lower 16 bits of the user's UID. While this works, it was not good enough as a non-root user could collide with a root user given a sufficiently large UID. This patch attempt to improve the J_KEY generation by using the following algorithm: The 16 bit J_KEY space is partitioned into 3 separate spaces reserved for different user classes: * all users with administtor privileges (including 'root') will use J_KEYs in the range of 0 to 31, * all kernel protocols, which use KDETH packets will use J_KEYs in the range of 32 to 63, and * all other users will use J_KEYs in the range of 64 to 65535. The above separation is aimed at preventing different user levels from sending packets to each other and, additionally, separate kernel protocols from all other types of users. The later is meant to prevent the potential corruption of kernel memory by any other type of user. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Return invalid field for non-QSFP CableInfo queriesEaswar Hariharan1-0/+5
The driver does not check if the CableInfo query is supported for the port type. Return early if CableInfo is not supported for the port type, making compliance with the specification explicit and preventing lower level code from potentially doing the wrong thing if the query is not supported for the hardware implementation. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/usnic: Fix error return codeChristophe Jaillet1-1/+2
If 'pci_register_driver' fails, we return 'err' which is known to be 0. Return the error instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Add missing error code assignment before testChristophe Jaillet1-1/+1
It is likely that checking the result of 'setup_ctxt' is expected here. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Using kfree_rcu() to simplify the codeWei Yongjun3-10/+2
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Validate header in set_armed_activeMike Marciniszyn1-1/+2
Validate the etype to insure that the header is correct. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/hfi1: Pass packet ptr to set_armed_activeMike Marciniszyn1-5/+5
The "packet" parameter was being passed on the stack, change it to a pointer. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Powered by cgit, Gruvboxed by Blaster4385.