aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mlx5
AgeCommit message (Collapse)AuthorFilesLines
2021-05-26Merge tag 'net-5.13-rc4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
2021-05-26RDMA/mlx5: Take qp type from mlx5_ib_qpMaor Gottlieb5-36/+31
Change all the places in the mlx5_ib driver to take the qp type from the mlx5_ib_qp struct, except the QP initialization flow. It will ensure that we check the right QP type also for vendor specific QPs. Link: https://lore.kernel.org/r/b2e16cd65b59cd24fa81c01c7989248da44e58ea.1621413899.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-20RDMA/mlx5: Remove unused parameter udataLang Cheng7-11/+7
The old version of ib_umem_get() need these udata as a parameter but now they are unnecessary. Fixes: c320e527e154 ("IB: Allow calls to ib_umem_get from kernel ULPs") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lang Cheng <[email protected]> Signed-off-by: Weihang Li <[email protected]> Acked-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-20RDMA/mlx5: Add SQD2RTS bit to the alloc ucontext responseSergey Gorenko1-0/+4
The new bit in the comp_mask is needed to mark that kernel supports SQD2RTS transition for the modify QP command. Link: https://lore.kernel.org/r/7ce705fedac1b2b8e3a2f4013e04244dc5946344.1620641808.git.leonro@nvidia.com Reviewed-by: Evgenii Kochetov <[email protected]> Signed-off-by: Sergey Gorenko <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-20RDMA/mlx5: Support SQD2RTS for modify QPSergey Gorenko2-0/+18
The transition of the QP state from SQD to RTS is allowed by the IB specification. The hardware also supports that, but it is not implemented in mlx5_ib. This commit adds SQD2RTS command to the modify QP in mlx5_ib to support the missing feature. The feature is required by the signature pipelining API that will be added to rdma-core. Link: https://lore.kernel.org/r/ab4876360bfba0e9d64a5e8599438e32e0cb351e.1620641808.git.leonro@nvidia.com Reviewed-by: Evgenii Kochetov <[email protected]> Signed-off-by: Sergey Gorenko <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-19RDMA/mlx5: Fix query DCT via DEVXMaor Gottlieb1-4/+2
When executing DEVX command to query QP object, we need to take the QP type from the mlx5_ib_qp struct which hold the driver specific QP types as well, such as DC. Fixes: 34613eb1d2ad ("IB/mlx5: Enable modify and query verbs objects via DEVX") Link: https://lore.kernel.org/r/6eee15d63f09bb70787488e0cf96216e2957f5aa.1621413654.git.leonro@nvidia.com Reviewed-by: Yishai Hadas <[email protected]> Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-18{net, RDMA}/mlx5: Fix override of log_max_qp by other deviceMaor Gottlieb1-2/+2
mlx5_core_dev holds pointer to static profile, hence when the log_max_qp of the profile is override by some device, then it effect all other mlx5 devices that share the same profile. Fix it by having a profile instance for every mlx5 device. Fixes: 883371c453b9 ("net/mlx5: Check FW limitations on log_max_qp before setting it") Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-05-17RDMA/mlx5: Recover from fatal event in dual port modeMaor Gottlieb1-0/+1
When there is fatal event on the slave port, the device is marked as not active. We need to mark it as active again when the slave is recovered to regain full functionality. Fixes: d69a24e03659 ("IB/mlx5: Move IB event processing onto a workqueue") Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-17RDMA/mlx5: Verify that DM operation is reasonableMaor Gottlieb1-0/+3
Fix the complaint from smatch by verifing that the user requested DM operation is not greater than 31. divers/infiniband/hw/mlx5/dm.c:220 mlx5_ib_handler_MLX5_IB_METHOD_DM_MAP_OP_ADDR() error: undefined (user controlled) shift '(((1))) << op' Fixes: cea85fa5dbc2 ("RDMA/mlx5: Add support in MEMIC operations") Link: https://lore.kernel.org/r/458b1d7710c3cf01360c8771893f483665569786.1620711734.git.leonro@nvidia.com Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-11RDMA/mlx5: Remove redundant assignment to retYang Li1-1/+1
Variable 'ret' is set to the rerurn value of function mlx5_mr_cache_alloc() but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed Clean up the following clang-analyzer warning: drivers/infiniband/hw/mlx5/odp.c:421:2: warning: Value stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores] Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()") Link: https://lore.kernel.org/r/[email protected] Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds20-758/+1198
Pull rdma updates from Jason Gunthorpe: "This is significantly bug fixes and general cleanups. The noteworthy new features are fairly small: - XRC support for HNS and improves RQ operations - Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and qib - Quite a few general cleanups on spelling, error handling, static checker detections, etc - Increase the number of device ports supported beyond 255. High port count software switches now exist - Several bug fixes for rtrs - mlx5 Device Memory support for host controlled atomics - Report SRQ tables through to rdma-tool" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits) IB/qib: Remove redundant assignment to ret RDMA/nldev: Add copy-on-fork attribute to get sys command RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res RDMA/siw: Fix a use after free in siw_alloc_mr IB/hfi1: Remove redundant variable rcd RDMA/nldev: Add QP numbers to SRQ information RDMA/nldev: Return SRQ information RDMA/restrack: Add support to get resource tracking for SRQ RDMA/nldev: Return context information RDMA/core: Add CM to restrack after successful attachment to a device RDMA/cma: Skip device which doesn't support CM RDMA/rxe: Fix a bug in rxe_fill_ip_info() RDMA/mlx5: Expose private query port RDMA/mlx4: Remove an unused variable RDMA/mlx5: Fix type assignment for ICM DM IB/mlx5: Set right RoCE l3 type and roce version while deleting GID RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails RDMA/cxgb4: add missing qpid increment IB/ipoib: Remove unnecessary struct declaration RDMA/bnxt_re: Get rid of custom module reference counting ...
2021-04-20RDMA/mlx5: Expose private query portMark Bloch1-0/+173
Expose a non standard query port via IOCTL that will be used to expose port attributes that are specific to mlx5 devices. The new interface receives a port number to query and returns a structure that contains the available attributes for that port. This will be used to fill the gap between pure DEVX use cases and use cases where a kernel needs to inform userspace about various kernel driver configurations that userspace must use in order to work correctly. Flags is used to indicate which fields are valid on return. MLX5_IB_UAPI_QUERY_PORT_VPORT: The vport number of the queered port. MLX5_IB_UAPI_QUERY_PORT_VPORT_VHCA_ID: The VHCA ID of the vport of the queered port. MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_RX: The vport's RX ICM address used for sw steering. MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_TX: The vport's TX ICM address used for sw steering. MLX5_IB_UAPI_QUERY_PORT_VPORT_REG_C0: The metadata used to tag egress packets of the vport. MLX5_IB_UAPI_QUERY_PORT_ESW_OWNER_VHCA_ID: The E-Switch owner vhca id of the vport. Link: https://lore.kernel.org/r/6e2ef13e5a266a6c037eb0105eb1564c7bb52f23.1618743394.git.leonro@nvidia.com Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-20RDMA/mlx5: Fix type assignment for ICM DMMaor Gottlieb1-10/+13
We should hold the UAPI DM type in the base struct and not the internal mlx5 type. Fixes: 251b9d788750 ("RDMA/mlx5: Re-organize the DM code") Link: https://lore.kernel.org/r/58dedbd5c132660f808e59166d434e2eaa6ecf7a.1618753425.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-20IB/mlx5: Set right RoCE l3 type and roce version while deleting GIDParav Pandit1-4/+4
Currently when GID is deleted, it zero out all the fields of the RoCE address in the SET_ROCE_ADDRESS command for a specified index. roce_version = 0 means RoCEv1 in the SET_ROCE_ADDRESS command. This assumes that device has RoCEv1 always enabled which is not always correct. For example Subfunction does not support RoCEv1. Due to this assumption a previously added RoCEv2 GID is always deleted as RoCEv1 GID. This results in a below syndrome: mlx5_core.sf mlx5_core.sf.4: mlx5_cmd_check:777:(pid 4256): SET_ROCE_ADDRESS(0x761) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x12822d) Hence set the right RoCE version during GID deletion provided by the core. Link: https://lore.kernel.org/r/d3f54129c90ca329caf438dbe31875d8ad08d91a.1618753425.git.leonro@nvidia.com Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-13Merge branch 'mlx5_memic_ops' of ↵Jason Gunthorpe8-367/+659
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Maor Gottlieb says: ==================== This series from Maor extends MEMIC to support atomic operations from the host in addition to already supported regular read/write. ==================== * 'memic_ops': RDMA/mlx5: Expose UAPI to query DM RDMA/mlx5: Add support in MEMIC operations RDMA/mlx5: Add support to MODIFY_MEMIC command RDMA/mlx5: Re-organize the DM code RDMA/mlx5: Move all DM logic to separate file RDMA/uverbs: Make UVERBS_OBJECT_METHODS to consider line number net/mlx5: Add MEMIC operations related bits
2021-04-13RDMA/mlx5: Expose UAPI to query DMMaor Gottlieb2-1/+47
Expose UAPI to query MEMIC DM, this will let user space application that didn't allocate the DM but has access to by owning the matching command FD to retrieve its information. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-13RDMA/mlx5: Add support in MEMIC operationsMaor Gottlieb4-14/+198
MEMIC buffer, in addition to regular read and write operations, can support atomic operations from the host. Introduce and implement new UAPI to allocate address space for MEMIC operations such as atomic. This includes: 1. Expose new IOCTL for request mapping of MEMIC operation. 2. Hold the operations address in a list, so same operation to same DM will be allocated only once. 3. Manage refcount on the mlx5_ib_dm object, so it would be keep valid until all addresses were unmapped. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-13RDMA/mlx5: Add support to MODIFY_MEMIC commandMaor Gottlieb2-0/+38
Add two functions to allocate and deallocate MEMIC operations by using the MODIFY_MEMIC command. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-13RDMA/mlx5: Re-organize the DM codeMaor Gottlieb3-116/+114
1. Inline the checks from check_dm_type_support() into their respective allocation functions. 2. Fix use after free when driver fails to copy the MEMIC address to the user by moving the allocation code into their respective functions, hence we avoid the explicit call to free the DM in the error flow. 3. Split mlx5_ib_dm struct to memic and icm proper typesafety throughout. Fixes: dc2316eba73f ("IB/mlx5: Fix device memory flows") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-13RDMA/mlx5: Move all DM logic to separate fileMaor Gottlieb8-362/+388
Move all device memory related code to a separate file. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-12Merge branch 'mlx5-next' of ↵Jason Gunthorpe3-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== This pr contains changes from mlx5-next branch, already reviewed on netdev and rdma mailing lists, links below. 1) From Leon, Dynamically assign MSI-X vectors count Already Acked by Bjorn Helgaas. https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/ 2) Cleanup series: https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/ From Mark, E-Switch cleanups and refactoring, and the addition of single FDB mode needed HW bits. From Mikhael, Remove unused struct field From Saeed, Cleanup W=1 prototype warning From Zheng, Esw related cleanup From Tariq, User order-0 page allocation for EQs ==================== * mlx5-next: net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks net/mlx5: Dynamically assign MSI-X vectors count net/mlx5: Add dynamic MSI-X capabilities bits PCI/IOV: Add sysfs MSI-X vector assignment interface net/mlx5: Use order-0 allocations for EQs net/mlx5: Add IFC bits needed for single FDB mode net/mlx5: E-Switch, Refactor send to vport to be more generic RDMA/mlx5: Use representor E-Switch when getting netdev and metadata net/mlx5: E-Switch, Add eswitch pointer to each representor net/mlx5: E-Switch, Add match on vhca id to default send rules net/mlx5: Remove unused mlx5_core_health member recover_work net/mlx5: simplify the return expression of mlx5_esw_offloads_pair() net/mlx5: Cleanup prototype warning Signed-off-by: Jason Gunthorpe <[email protected]>
2021-04-09Merge branch 'mlx5-next' of ↵Jakub Kicinski3-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-next 2021-04-09 This pr contains changes from mlx5-next branch, already reviewed on netdev and rdma mailing lists, links below. 1) From Leon, Dynamically assign MSI-X vectors count Already Acked by Bjorn Helgaas. https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/ 2) Cleanup series: https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/ From Mark, E-Switch cleanups and refactoring, and the addition of single FDB mode needed HW bits. From Mikhael, Remove unused struct field From Saeed, Cleanup W=1 prototype warning From Zheng, Esw related cleanup From Tariq, User order-0 page allocation for EQs * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Implement sriov_get_vf_total_msix/count() callbacks net/mlx5: Dynamically assign MSI-X vectors count net/mlx5: Add dynamic MSI-X capabilities bits PCI/IOV: Add sysfs MSI-X vector assignment interface net/mlx5: Use order-0 allocations for EQs net/mlx5: Add IFC bits needed for single FDB mode net/mlx5: E-Switch, Refactor send to vport to be more generic RDMA/mlx5: Use representor E-Switch when getting netdev and metadata net/mlx5: E-Switch, Add eswitch pointer to each representor net/mlx5: E-Switch, Add match on vhca id to default send rules net/mlx5: Remove unused mlx5_core_health member recover_work net/mlx5: simplify the return expression of mlx5_esw_offloads_pair() net/mlx5: Cleanup prototype warning ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-04-07IB/mlx5: Reduce max order of memory allocated for xlt updatePraveen Kumar Kannoju1-1/+1
To update xlt (during mlx5_ib_reg_user_mr()), the driver can request up to 1 MB (order-8) memory, depending on the size of the MR. This costly allocation can sometimes take very long to return (a few seconds). This causes the calling application to hang for a long time, especially when the system is fragmented. To avoid these long latency spikes, the calls the higher order allocations need to fail faster in case they are not available. In order to acheive this we need __GFP_NORETRY flag in the gfp_mask before during fetching the free pages. Allow the algorithm to automatically fall back to smaller page sizes. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Praveen Kumar Kannoju <[email protected]> Acked-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-26RDMA/mlx5: Set ODP caps only if device profile support ODPShay Drory3-9/+3
Currently, ODP caps are set during the init stage of mlx5_ib_dev, regardless of whether the device profile supports ODP or not. There is no point in setting ODP caps if the device profile doesn't support ODP. Hence, move setting the ODP caps to the odp_init stage. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-26RDMA/mlx5: Fix drop packet rule in egress tableMaor Gottlieb1-4/+5
Initial drop action support missed that drop action can be added to egress flow tables as well. Add the missing support. This requires making sure that dest_type isn't set to PORT which in turn exposes a possibility of passing dst while indicating number of dsts as zero. Explicitly check for number of dsts and pass the appropriate pointer. Fixes: f29de9eee782 ("RDMA/mlx5: Add support for drop action in DV steering") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-26RDMA: Support more than 255 rdma portsMark Bloch10-91/+94
Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-1/+1
Pull rdma fixes from Jason Gunthorpe: "Not much going on, just some small bug fixes: - Typo causing a regression in mlx5 devx - Regression in the recent hns rework causing the HW to get out of sync - Long-standing cxgb4 adaptor crash when destroying cm ids" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server RDMA/hns: Fix bug during CMDQ initialization RDMA/mlx5: Fix typo in destroy_mkey inbox
2021-03-23RDMA/mlx5: Create ODP EQ only when ODP MR is createdShay Drory3-10/+29
There is no need to create the ODP EQ if the user doesn't use ODP MRs. Hence, create it only when the first ODP MR is created. This EQ will be destroyed only when the device is unloaded. This will decrease the number of EQs created per device. for example: If we creates 1K devices (SF/VF/etc'), than we will decrease the num of EQs by 1K. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-22RDMA/mlx5: Add missing returned error check of mlx5_ib_dereg_mrLeon Romanovsky1-1/+1
Fix the following smatch error: drivers/infiniband/hw/mlx5/mr.c:1950 mlx5_ib_dereg_mr() error: uninitialized symbol 'rc'. Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()") Link: https://lore.kernel.org/r/[email protected] Reported-by: kernel test robot <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-12net/mlx5: E-Switch, Refactor send to vport to be more genericMark Bloch1-2/+1
Now that each representor stores a pointer to the managing E-Switch use that information when creating the send-to-vport rules. Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-03-12RDMA/mlx5: Use representor E-Switch when getting netdev and metadataMark Bloch3-4/+3
Now that a pointer to the managing E-Switch is stored in the representor use it. Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Acked-by: Jason Gunthorpe <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-03-11RDMA/mlx5: Allow larger pages in DevX umemJason Gunthorpe1-10/+54
The umem DMA list calculation was locked at 4k pages due to confusion around how this API works and is used when larger pages are present. The conclusion is: - umem's cannot extend past what is mapped into the process, so creating a lage page size and referring to a sub-range is not allowed - umem's must always have a page offset of zero, except for sub PAGE_SIZE umems - The feature of umem_offset to create multiple objects inside a umem is buggy and isn't used anyplace. Thus we can assume all users of the current API have umem_offset == 0 as well Provide a new page size calculator that limits the DMA list to the VA range and enforces umem_offset == 0. Allow user space to specify the page sizes which it can accept, this bitmap must be derived from the intended use of the umem, based on per-usage HW limitations. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11IB/core: Split uverbs_get_const/default to consider target typeYishai Hadas1-0/+1
Change uverbs_get_const/uverbs_get_const_default to work properly with both signed/unsigned parameters. Current APIs mix s64 and u64 which leads to incorrect check when u64 value was supplied and its upper bit was set. In that case uverbs_get_const() / uverbs_get_const_default() lower bound check may fail unexpectedly, target is unsigned (lower bound is 0) but value became negative as of the s64 usage. Split to have two different APIs, no change to callers as the required API will be called internally according to the target type. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11RDMA/mlx5: Fix mlx5 rates to IB rates mapMark Zhang1-1/+14
Correct the map between mlx5 rates and corresponding ib rates, as they don't always have a fixed offset between them. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11RDMA/mlx5: Fix query RoCE portMaor Gottlieb1-3/+3
mlx5_is_roce_enabled returns the devlink RoCE init value, therefore it should be used only when driver is loaded. Instead we just need to read the roce_en field. In addition, rename mlx5_is_roce_enabled to mlx5_is_roce_init_enabled. Fixes: 7a58779edd75 ("IB/mlx5: Improve query port for representor port") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11RDMA/mlx5: Rename mlx5_mr_cache_invalidate() to revoke_mr()Jason Gunthorpe1-6/+6
Now that this is only used in a few places in mr.c give it a sensible name. It has nothing to do with the cache and can be invoked on any MR. DMA is stopped and the user cannot touch the MR any further once it completes. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()Jason Gunthorpe3-203/+86
Now that the SRCU stuff has been removed the entire MR destroy logic can be made a lot simpler. Currently there are many different ways to destroy a MR and it makes it really hard to do this task correctly. Route all destruction through mlx5_ib_dereg_mr() and make it work for all situations. Since it turns out all the different MR types do basically the same thing this removes a lot of knowledge of MR internals from ODP and leaves ODP just exporting an operation to clean up children. This fixes a few weird corner cases bugs and firmly uses the correct ordering of the MR destruction: - Stop parallel access to the mkey via the ODP xarray - Stop DMA - Release the umem - Clean up ODP children - Free/Recycle the MR Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11RDMA/mlx5: Use a union inside mlx5_ib_mrJason Gunthorpe2-3/+3
The struct mlx5_ib_mr can be used for three different things, but only one at a time: - In the user MR cache - As a kernel MR - As a user MR Overlay the three things into a single union with the following rules: - If the mr is found on the cache_ent->head list then it is a cache MR and umem == NULL. The entire union is zero after the MR is removed from the cache. - If umem != NULL or type == IB_MR_TYPE_USER then it is a user MR. - If umem == NULL then it is a kernel MR This reduces the size of struct mlx5_ib_mr to 552 bytes from 702. The only place the three flows overlap in the code is during dereg, so add a few extra checks along there. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11RDMA/mlx5: Zero out ODP related items in the mlx5_ib_mrJason Gunthorpe3-52/+66
All of the ODP code assumes when it calls mlx5_mr_cache_alloc() the ODP related fields are zero'd. This is true if the MR was just allocated, but if the MR is recycled through the cache then the values are never zero'd. This causes a bug in the odp_stats, they don't reset when the MR is reallocated, also is_odp_implicit is never 0'd. So we can use memset on a block of the mlx5_ib_mr reorganize the structure to put all the data that can be zero'd by the cache at the end. It is organized as an anonymous struct because the next patch will make this a union. Delete the unused smr_info. Don't set the kernel only desc_size on the user path. No longer any need to zero mr->parent before freeing it, the memset() will get it now. Fixes: a3de94e3d61e ("IB/mlx5: Introduce ODP diagnostic counters") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-11RDMA/mlx5: Fix typo in destroy_mkey inboxMark Zhang1-1/+1
Set mkey_index to the correct place when preparing the destroy_mkey inbox, this will fix the following syndrome: mlx5_core 0000:08:00.0: mlx5_cmd_check:782:(pid 980716): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635) Link: https://lore.kernel.org/r/[email protected] Fixes: 1368ead04c36 ("RDMA/mlx5: Use strict get/set operations for obj_id") Reviewed-by: Ido Kalir <[email protected]> Reviewed-by: Yishai Hadas <[email protected]> Signed-off-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-10RDMA/mlx5: Fix timestamp default modeMaor Gottlieb1-4/+14
1. Don't set the ts_format bit to default when it reserved - device is running in the old mode (free running). 2. XRC doesn't have a CQ therefore the ts format in the QP context should be default / free running. 3. Set ts_format to WQ. Fixes: 2fe8d4b87802 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS") Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-03-03RDMA/mlx5: Set correct kernel-doc identifierLeon Romanovsky1-1/+1
The W=1 allmodconfig build produces the following warning: drivers/infiniband/hw/mlx5/odp.c:1086: warning: wrong kernel-doc identifier on line: * Parse a series of data segments for page fault handling. Fix it by changing /** to be /* as it is written in kernel-doc documentation. Fixes: 5e769e444d26 ("RDMA/hw/mlx5/odp: Fix formatting and add missing descriptions in 'pagefault_data_segments()'") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-03-01IB/mlx5: Add missing error codeYueHaibing1-1/+3
Set err to -ENOMEM if kzalloc fails instead of 0. Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: YueHaibing <[email protected]> Acked-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-02-18Merge tag 'v5.11' into rdma.git for-nextJason Gunthorpe1-4/+2
Linux 5.11 Merged to resolve conflicts with RDMA rc commits - drivers/infiniband/sw/rxe/rxe_net.c The final logic is to call rxe_get_dev_from_net() again with the master netdev if the packet was rx'd on a vlan. To keep the elimination of the local variables requires a trivial edit to the code in -rc Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jason Gunthorpe <[email protected]>
2021-02-16Merge branch 'mlx5_timestamp' into rdma.git for-nextJason Gunthorpe1-8/+96
Leon Romanovsky says: ==================== Add an extra timestamp format for mlx5_ib device. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. Signed-off-by: Jason Gunthorpe <[email protected]> * branch 'mlx5_timestamp': RDMA/mlx5: Fail QP creation if the device can not support the CQE TS net/mlx5: Add new timestamp mode bits
2021-02-16RDMA/mlx5: Fail QP creation if the device can not support the CQE TSAharon Landau1-8/+96
In ConnectX6Dx device, HW can work in real time timestamp mode according to the device capabilities per RQ/SQ/QP. When the flag IB_UVERBS_CQ_FLAGS_TIMESTAMP_COMPLETION is set, the user expect to get TS on the CQEs in free running format, so we need to fail the QP creation if the current mode of the device doesn't support it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Aharon Landau <[email protected]> Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-02-16RDMA/mlx5: Allow CQ creation without attached EQsTal Gilboa1-1/+12
The traditional DevX CQ creation flow goes through mlx5_core_create_cq() which checks that the given EQN corresponds to an existing EQ and attaches a devx handler to the EQN for the CQ. In some cases the EQ will not be a kernel EQ, but will be controlled by modify CQ, don't block creating these just because the EQN can't be found in the kernel. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tal Gilboa <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-02-09RDMA/mlx5: Support 400Gbps IB rate in mlx5 driverPatrisious Haddad1-0/+2
Support 400Gbps IB rate in mlx5 driver. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Patrisious Haddad <[email protected]> Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-02-08RDMA/mlx5: Cleanup the synchronize_srcu() from the ODP flowYishai Hadas5-175/+124
Cleanup the synchronize_srcu() from the ODP flow as it was found to be a very heavy time consumer as part of dereg_mr. For example de-registration of 10000 ODP MRs each with size of 2M hugepage took 19.6 sec comparing de-registration of same number of non ODP MRs that took 172 ms. The new locking scheme uses the wait_event() mechanism which follows the use count of the MR instead of using synchronize_srcu(). By that change, the time required for the above test took 95 ms which is even better than the non ODP flow. Once fully dropped the srcu usage, had to come with a lock to protect the XA access. As part of using the above mechanism we could also clean the num_deferred_work stuff and follow the use count instead. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-02-05IB/mlx5: Use rdma_for_each_port for port iterationParav Pandit3-9/+10
Instead of open coding the loop for port iteration, use rdma_for_each_port macro provided by core. To use such macro, early initialization of phys_port_cnt is needed. Hence, initialize such constant early enough in the init stage. Whichever functions are called with port using rdma_for_each_port(), convert their port type from u8 to unsigned int to match the core API. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.