aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mlx5/main.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-26RDMA/mlx5: Fix devlink deadlock on net namespace deletionParav Pandit1-2/+4
When a mlx5 core devlink instance is reloaded in different net namespace, its associated IB device is deleted and recreated. Example sequence is: $ ip netns add foo $ devlink dev reload pci/0000:00:08.0 netns foo $ ip netns del foo mlx5 IB device needs to attach and detach the netdevice to it through the netdev notifier chain during load and unload sequence. A below call graph of the unload flow. cleanup_net() down_read(&pernet_ops_rwsem); <- first sem acquired ops_pre_exit_list() pre_exit() devlink_pernet_pre_exit() devlink_reload() mlx5_devlink_reload_down() mlx5_unload_one() [...] mlx5_ib_remove() mlx5_ib_unbind_slave_port() mlx5_remove_netdev_notifier() unregister_netdevice_notifier() down_write(&pernet_ops_rwsem);<- recurrsive lock Hence, when net namespace is deleted, mlx5 reload results in deadlock. When deadlock occurs, devlink mutex is also held. This not only deadlocks the mlx5 device under reload, but all the processes which attempt to access unrelated devlink devices are deadlocked. Hence, fix this by mlx5 ib driver to register for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-10-16RDMA: Explicitly pass in the dma_device to ib_register_deviceJason Gunthorpe1-1/+1
The code in setup_dma_device has become rather convoluted, move all of this to the drivers. Drives now pass in a DMA capable struct device which will be used to setup DMA, or drivers must fully configure the ibdev for DMA and pass in NULL. Other than setting the masks in rvt all drivers were doing this already anyhow. mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for DMA based on their hardweare limits in: __mthca_init_one() dma_set_max_seg_size (1G) __mlx4_init_one() dma_set_max_seg_size (1G) mlx5_pci_init() set_dma_caps() dma_set_max_seg_size (2G) Other non software drivers (except usnic) were extended to UINT_MAX [1, 2] instead of 2G as was before. [1] https://lore.kernel.org/linux-rdma/[email protected]/ [2] https://lore.kernel.org/linux-rdma/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org Suggested-by: Christoph Hellwig <[email protected]> Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-10-01RDMA/core: Modify enum ib_gid_type and enum rdma_network_typeAvihai Horon1-2/+2
Separate IB_GID_TYPE_IB and IB_GID_TYPE_ROCE to two different values, so enum ib_gid_type will match the gid types of the new query GID table API which will be introduced in the following patches. This change in enum ib_gid_type requires to change also enum rdma_network_type by separating RDMA_NETWORK_IB and RDMA_NETWORK_ROCE_V1 values. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Avihai Horon <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-09-29RDMA/mlx5: Reuse existing fields in parent QP storage objectLeon Romanovsky1-5/+1
Remove duplication of mlx5_ib_qp and mlx5_ib_gsi_qp fields. This change returns the memory footprint of mlx5_ib QP to be as it was before embedding GSI QP. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-09-18RDMA/mlx5: Disable IB_DEVICE_MEM_MGT_EXTENSIONS if IB_WR_REG_MR can't workJason Gunthorpe1-1/+3
set_reg_wr() always fails if !umr_modify_entity_size_disabled because mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR doesn't work and that means the device should not advertise IB_DEVICE_MEM_MGT_EXTENSIONS. Fixes: 841b07f99a47 ("IB/mlx5: Block MR WR if UMR is not possible") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-09-18Merge branch 'mlx_sw_owner_v2' into rdma.git for-nextJason Gunthorpe1-1/+3
Leon Romanovsky says: ==================== This series from Alex extends software steering interface to support devices with extra capability "sw_owner_2" which will replace existing "sw_owner". ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_sw_owner_v2: RDMA/mlx5: Expose TIR and QP ICM address for sw_owner_v2 devices RDMA/mlx5: Allow DM allocation for sw_owner_v2 enabled devices RDMA/mlx5: Add sw_owner_v2 bit capability
2020-09-18Merge branch 'mlx5_active_speed' into rdma.git for-nextJason Gunthorpe1-26/+15
Leon Romanovsky says: ==================== IBTA declares speed as 16 bits, but kernel stores it in u8. This series fixes in-kernel declaration while keeping external interface intact. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_active_speed': RDMA: Fix link active_speed size RDMA/mlx5: Delete duplicated mlx5_ptys_width enum net/mlx5: Refactor query port speed functions
2020-09-18RDMA: Fix link active_speed sizeAharon Landau1-6/+2
According to the IB spec active_speed size should be u16 and not u8 as before. Changing it to allow further extensions in offered speeds. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Aharon Landau <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-09-18RDMA/mlx5: Allow DM allocation for sw_owner_v2 enabled devicesAlex Vesker1-1/+3
sw_owner_v2 will replace sw_owner for future devices, this means that if sw_owner_v2 is set sw_owner should be ignored and DM allocation is required for sw_owner_v2 devices to function. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-09-17RDMA: Convert RWQ table logic to ib_core allocation schemeLeon Romanovsky1-0/+3
Move struct ib_rwq_ind_table allocation to ib_core. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-09-17RDMA: Clean MW allocation and free flowsLeon Romanovsky1-0/+2
Move allocation and destruction of memory windows under ib_core responsibility and clean drivers to ensure that no updates to MW ib_core structures are done in driver layer. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-09-17RDMA/mlx5: Delete duplicated mlx5_ptys_width enumAharon Landau1-14/+6
Combine two same enums to avoid duplication. Signed-off-by: Aharon Landau <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2020-09-17net/mlx5: Refactor query port speed functionsAharon Landau1-13/+14
The functions mlx5_query_port_link_width_oper and mlx5_query_port_ib_proto_oper are always called together, so combine them to a new function called mlx5_query_port_oper to avoid duplication. And while the mlx5i_get_port_settings is the same as mlx5_query_port_oper therefore let's remove it. According to the IB spec link_width_oper and ib_proto_oper should be u16 and not as written u8, so perform casting as a preparation to cross-RDMA patch which will fix that type for all drivers in the RDMA subsystem. Fixes: ada68c31ba9c ("net/mlx5: Introduce a new header file for physical port functions") Signed-off-by: Aharon Landau <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2020-09-09RDMA: Restore ability to fail on PD deallocateLeon Romanovsky1-2/+2
The IB verbs objects are counted by the kernel and ib_core ensures that deallocate PD will success so it will be called once all other objects that depends on PD will be released. This is achieved by managing various reference counters on such objects. The mlx5 driver didn't follow this standard flow when allowed DEVX objects that are not managed by ib_core to be interleaved with the ones under ib_core responsibility. In such interleaved scenarios deallocate command can fail and ib_core will leave uobject in internal DB and attempt to clean it later to free resources anyway. This change partially restores returned value from dealloc_pd() for all drivers, but keeping in mind that non-DEVX devices and kernel verbs paths shouldn't fail. Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-2880/+374
Pull rdma updates from Jason Gunthorpe: "A quiet cycle after the larger 5.8 effort. Substantially cleanup and driver work with a few smaller features this time. - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re - Removal of dead or redundant code across the drivers - RAW resource tracker dumps to include a device specific data blob for device objects to aide device debugging - Further advance the IOCTL interface, remove the ability to turn it off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands - Remove stubs related to devices with no pkey table - A shared CQ scheme to allow multiple ULPs to share the CQ rings of a device to give higher performance - Several more static checker, syzkaller and rare crashers fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits) RDMA/mlx5: Fix flow destination setting for RDMA TX flow table RDMA/rxe: Remove pkey table RDMA/umem: Add a schedule point in ib_umem_get() RDMA/hns: Fix the unneeded process when getting a general type of CQE error RDMA/hns: Fix error during modify qp RTS2RTS RDMA/hns: Delete unnecessary memset when allocating VF resource RDMA/hns: Remove redundant parameters in set_rc_wqe() RDMA/hns: Remove support for HIP08_A RDMA/hns: Refactor hns_roce_v2_set_hem() RDMA/hns: Remove redundant hardware opcode definitions RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP RDMA/include: Replace license text with SPDX tags RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting RDMA/cma: Execute rdma_cm destruction from a handler properly RDMA/cma: Remove unneeded locking for req paths RDMA/cma: Using the standard locking pattern when delivering the removal event RDMA/cma: Simplify DEVICE_REMOVAL for internal_id RDMA/efa: Add EFA 0xefa1 PCI ID RDMA/efa: User/kernel compatibility handshake mechanism ...
2020-07-28RDMA/mlx5: Delete unreachable codeLeon Romanovsky1-3/+0
Delete two occurrences of unreachable code discovered by the Coverity. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-08IB/mlx5: Fix 50G per lane indicationAya Levin1-1/+1
Some released FW versions mistakenly don't set the capability that 50G per lane link-modes are supported for VFs (ptys_extended_ethernet capability bit). Use PTYS.ext_eth_proto_capability instead, as this indication is always accurate. If PTYS.ext_eth_proto_capability is valid (has a non-zero value) conclude that the HCA supports 50G per lane. Otherwise, conclude that the HCA doesn't support 50G per lane. Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-07RDMA/mlx5: Delete one-time used functionsLeon Romanovsky1-277/+198
Merge them into their callers, usually the only thing the caller did was to call the one function, so this is clearer. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-07RDMA/mlx5: Cleanup DEVX initialization flowLeon Romanovsky1-24/+5
Move DEVX initialization and cleanup flows to the devx.c instead of having almost empty functions in main.c Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-07RDMA/mlx5: Separate flow steering logic from main.cLeon Romanovsky1-1714/+7
Move flow steering logic to be in separate file and rename flow.c to be fs.c because it is better describe the content. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-07RDMA/mlx5: Separate counters from main.cLeon Romanovsky1-693/+8
There are number of counters types supported in mlx5_ib: HW counters, congestion counters, Q-counters and flow counters. Almost all supporting code was placed in main.c that made almost impossible to maintain the code anymore. Let's create separate code namespace for the counters to easy future generalization effort. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-07RDMA/mlx5: Separate restrack callbacks initialization from main.cLeon Romanovsky1-34/+9
The restrack code has separate .c, so move callbacks initialization to that file to improve code locality. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-07RDMA/mlx5: Limit the scope of mlx5_ib_enable_driver functionLeon Romanovsky1-12/+12
The mlx5_ib_enable_driver() is local function and doesn't need to be shared in mlx5_ib, so change it's signature to have static keyword in it. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-06RDMA: Move XRCD to be under ib_core responsibilityLeon Romanovsky1-0/+2
Update the code to allocate and free ib_xrcd structure in the ib_core instead of inside drivers. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-06RDMA/core: Create and destroy counters in the ib_coreLeon Romanovsky1-14/+6
Move allocation and destruction of counters under ib_core responsibility Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-06RDMA/mlx5: Introduce UAPI to query PD attributesYishai Hadas1-0/+1
Introduce UAPI to query PD attributes, this can be used to retrieve PD attributes by having the PD handle of the created one and owning the command FD for the ucontxet. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-06RDMA/mlx5: Implement the query ucontext functionalityYishai Hadas1-0/+35
Implement the query ucontext functionality by returning the original ucontext data as part of an extra mlx5 attribute that holds the driver UAPI response. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-06RDMA/mlx5: Refactor mlx5_ib_alloc_ucontext() responseYishai Hadas1-103/+93
Refactor mlx5_ib_alloc_ucontext() to set its response fields in a cleaner way. It includes, - Move the relevant code to a self contained function. - Calculate the response length once and drop redundant code all around. - Reuse previously set ucontext fields once preparing the response. The self contained function will be used in next patch as part of implementing the query ucontext functionality. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-06RDMA/mlx5: Get XRCD number directly for the internal useLeon Romanovsky1-25/+14
The mlx5_ib creates XRC domain and uses for creating internal SRQ. However all that is needed is XRCD number and not full blown ib_xrcd objects. Update the code to get and store the number only. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-24RDMA/mlx5: Add support to get MR resource in RAW formatMaor Gottlieb1-0/+1
Add support to get MR (mkey) resource dump in RAW format. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-24RDMA/mlx5: Add support to get CQ resource in RAW formatMaor Gottlieb1-0/+1
Add support to get CQ resource dump in RAW format. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-24RDMA/mlx5: Add support to get QP resource in RAW formatMaor Gottlieb1-0/+1
Add a generic function to use the resource dump mechanism to get the QP resource data. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-23RDMA: Add dedicated MR resource tracker functionMaor Gottlieb1-2/+2
In order to avoid double multiplexing of the resource when it is a MR, add a dedicated callback function. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-02RDMA: Remove 'max_map_per_fmr'Jason Gunthorpe1-1/+0
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-29RDMA/mlx5: Support TX port affinity for VF drivers in LAG modeMark Zhang1-1/+1
The mlx5 VF driver doesn't set QP tx port affinity because it doesn't know if the lag is active or not, since the "lag_active" works only for PF interfaces. In this case for VF interfaces only one lag is used which brings performance issue. Add a lag_tx_port_affinity CAP bit; When it is enabled and "num_lag_ports > 1", then driver always set QP tx affinity, regardless of lag state. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-27RDMA/mlx5: Set ECE options during modify QPLeon Romanovsky1-0/+3
The most common way to set ECE option will be during modify QP command in INIT2RTR, RTR2RTS and RTS2RTS stages, so update mlx5 to support it. The new bit in the comp_mask is needed to mark that kernel supports ECE and can receive data instead of "reserved" field in the struct mlx5_ib_modify_qp. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-21RDMA/core: Allow the ioctl layer to abort a fully created uobjectJason Gunthorpe1-18/+6
While creating a uobject every create reaches a point where the uobject is fully initialized. For ioctls that go on to copy_to_user this means they need to open code the destruction of a fully created uobject - ie the RDMA_REMOVE_DESTROY sort of flow. Open coding this creates bugs, eg the CQ does not properly flush the events list when it does its error unwind. Provide a uverbs_finalize_uobj_create() function which indicates that the uobject is fully initialized and that abort should call to destroy_hw to destroy the uobj->object and related. Methods can call this function if they go on to have error cases after setting uobj->object. Once done those error cases can simply do return, without an error unwind. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yishai Hadas <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-17RDMA/mlx5: Update mlx5_ib driver nameShay Drory1-10/+1
Current description doesn't include new devices, change it by updating to have more generic description and remove DRIVER_NAME and DRIVER_VERSION defines. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-13RDMA/mlx5: Add support in steering default missMaor Gottlieb1-5/+4
User can configure default miss rule in order to skip matching in the user domain and forward the packet to the kernel steering domain. When user requests a default miss rule, we add steering rule to forward the traffic to the next namespace. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-13Merge branch 'mellanox/mlx5-next' into rdma.git for/nextJason Gunthorpe1-37/+10
From the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in following patches * branch 'mellanox/mlx5-next': net/mlx5: Add support in forward to namespace {IB/net}/mlx5: Simplify don't trap code net/mlx5: Replace zero-length array with flexible-array Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-13{IB/net}/mlx5: Simplify don't trap codeMaor Gottlieb1-37/+10
The fs_core already supports creation of rules with multiple actions/destinations. Refactor fs_core to handle the case when don't trap rule is created with destination. Adapt the calling code in the driver. Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Zhang <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2020-05-06RDMA/mlx5: Assign profile before calling stagesMark Bloch1-1/+2
Assign the profile to the IB device before executing stages. This will allow to check which profile is being used from within a stage. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-06RDMA/mlx5: Move all WR logic from qp.c to separate fileLeon Romanovsky1-2/+3
Split qp.c by removing all WR logic to separate file. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-06RDMA/mlx5: Update mlx5_ib to use new cmd interfaceLeon Romanovsky1-3/+2
Reuse newly introduced mlx5_cmd_exec_in() and mlx5_cmd_exec_inout() to reduce code duplication in mlx5_ib module. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-06RDMA/mlx5: Set UDP source port based on the grh.flow_labelMark Zhang1-2/+2
Calculate UDP source port based on the grh.flow_label. If grh.flow_label is not valid, we will use minimal supported UDP source port. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Zhang <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-05-02RDMA/mlx5: Set lag tx affinity according to slaveMaor Gottlieb1-0/+2
The patch sets the lag tx affinity of the data QPs and the GSI QPs according to the LAG xmit slave. For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI QPs, one for each physical port. When the driver selects the GSI QP, it will consider the port affinity result. For connected QPs, the driver sets the affinity of the xmit slave. The above, ensures that RC QP and it's corresponding GSI QP will transmit from the same physical port. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-04-28RDMA/mlx5: Delete create QP flags obfuscationLeon Romanovsky1-3/+3
There is no point in redefinition of stable and exposed to users create flags. Their values won't be changed and it is equal to used by the mlx5. Delete the mlx5 definitions and use IB/core fields. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-04-28net/mlx5: Use aligned variable while allocating ICM memoryErez Shitrit1-1/+1
The alignment value is part of the input structure, so use it and spare extra memory allocation when is not needed. Now, using the new ability when allocating icm for Direct-Rule insertion. Signed-off-by: Ariel Levkovich <[email protected]> Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-19net/mlx5: Move QP logic to mlx5_ibLeon Romanovsky1-2/+8
The mlx5_core doesn't need any functionality coded in qp.c, so move that file to drivers/infiniband/ be under mlx5_ib responsibility. Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.