aboutsummaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2018-09-16Merge 4.19-rc4 into staging-nextGreg Kroah-Hartman2-8/+6
Handle the merge issues and take the iio and staging driver fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14Merge tag 'iio-for-4.20a' of ↵Greg Kroah-Hartman65-304/+3580
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 1st round of IIO new device support, features and cleanups in the 4.20 cycle. There is a merge commit in here to pull in regmap support for repeatedly reading the same register (to read out FIFOs). Used by the adxl372 driver. This will find uses elsewhere once we tidy up various drivers that are effectively doing this and relying on not enabling regcache. New device support * Analog devices ADXL372 accelerometer - new driver for this accelerometer including fifo and and interrupt support. Follow up patches enforce trigger validation, add sampling frequency control and filter bandwidth control. A later series added i2c support to the existing SPI support. * ST lsm6dsx - rework and add support fo the LSM6DSO 6 axis mems sensor. * Linear LTC 1660 DAC - new driver supporting the LTC 1660 and LTC 1665 SPI DACs. * Microchip mcp3911 ADC. - new driver for this integrated analog front end and ADC. * Qualcomm SPMI PMIC5 adc driver - using the spmi framework, new driver and bindings for this ADC. Follow up patch adds some missing channels. Features * ad5758 - support hard reset using a gpio (if provided). * mpu6050 - Regulator support * qcom-spmi-adc5 - Sanity check the channel numbers provided by DT to make sure the driver actually knows about them. * sc27xx - give raw data for channel 20 as it's used on all known boards for the headset which needs a custom converstion function. If it turns out someone builds a board where this isn't true we will deal with it when it happens. - add ADC scale calibration. * tsl2772 - support device tree binding to set the proximity led settings. - regulator supprot. - binding for apds9930 - trivial addition as register compatible with tsl2772. Cleanups / Minor fixes * adxl345 - supress a static checker warning but explicitly checking if the id object is null. * bh1750 - avoid CONFIG_PM_SLEEP checks. - SPDX. * bme680 - spelling mistake - use clamp rather than open coding. - white space and other similar fixes. - rename MSK to MASK for clarifty and use GENMASK to specify them. - use the FIELD_GET macro rather than a very odd accessor of dividing by 16 to get the shift. - rework to share handing for oversampling of the various channels in a unified way. - check explicitly for val2 in write_raw function to ensure it is 0. - drop some field defines that don't add anything. * dpot-adc - SPDX * envelope detector - SPDX * isl29501 - fix an ancient compiler warning mostly because it results in much nicer code. * max30102 - mark switch fall throughs. * max44000 - drop an unused variable. * max512 - avoid CONFIG_PM_SLEEP checks. * max5481 - use of_device_get_match_data rather than open coding it. * max5821 - avoid CONFIG_PM_SLEEP checks. * max9611 - explicity cast an enum to an integer to make it totally clear that this is intended. * mcp4018 - fix an inconsistent MODULE_LICENSE. - use of_device_get_match_data rather than open coding it. * mcp4531 - use of_device_get_match_data rather than open coding it. - SPDX * mcp4725 - avoid CONFIG_PM_SLEEP checks. * mcp4922 - Fix error handling and prevent writing a negative to when setting the output voltage. * ms5611 - drop deprecated compatible strings without manufacturer from being explicitly listed. They are handled anyway. - SPDX * multiplexer - SPDX * qcom-vadc - fix inconsistent documentation for reg. * ti-dac5571 - provide and of_match_table. * treewide - update Michael Hennerich's email address. - Use %pOFn rather than device_node.name. * documentation. - tidy up a wrong kernel version for the introduction of the position_relative ABI.
2018-09-09Merge tag 'iio-fixes-4.19a' of ↵Greg Kroah-Hartman2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.19 cycle. * ad9523 - sysfs write should return the number of characters used or an error, not 0 which could result in an infinite loop in userspace. * lsm6dsx - Fix computation of length when updating the watermark to include timestamps avoiding the watermark being set earlier than intended. * maxim_thermocouple - Revert a patch adding the max31856 as it's not actually compatible with the register set that this driver supports. * si1133 - Fix an impossible value check so we don't always error out whether the passed in value is good or bad.
2018-09-08iio: light: bh1750: simplify setting PM opsTomasz Duszynski1-7/+2
Relying on CONFIG_PM_SLEEP to set PM ops is not necessary since core will handle everything internally. One have to only make sure that functions that can go unused are marked with __maybe_unused. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: adxl372: Add support for I2C communicationStefan Popa5-1/+75
The adxl372 is designed to communicate in either SPI or I2C protocol. It autodetects the format being used, requiring no configuration control to select the format. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: adxl372: Refactor the driverStefan Popa5-51/+101
This patch restructures the existing adxl372 driver by adding a module for SPI and a header file, while the baseline module deals with the chip-logic. This is a necessary step, as this driver should support in the future a similar device which differs only in the type of interface used (I2C instead of SPI). Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: pressure: ms5611: switch to SPDX identifierTomasz Duszynski4-16/+4
Drop boilerplate license text and use SPDX identifier instead. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: light: bh1750: switch to SPDX identifierTomasz Duszynski1-4/+1
Drop boilerplate license text and use SPDX identifier instead. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: imu: st_lsm6dsx: add support to LSM6DSOLorenzo Bianconi6-8/+205
Add support to STM LSM6DSO 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/lsm6dso.pdf Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: imu: st_lsm6dsx: add addr/max_word_len to st_lsm6dsx_read_block()Lorenzo Bianconi1-7/+9
Add reg addr and max_word_len parameters to st_lsm6dsx_read_block since LSM6DSO will use a different register address to read samples from the FIFO and a different sample len Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: imu: st_lsm6dsx: make st_lsm6dsx_check_odr() non-staticLorenzo Bianconi2-2/+2
Remove static qualifier from st_lsm6dsx_check_odr() definition in order to use it for the support of new devices Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: imu: st_lsm6dsx: add read_fifo callback to fifo_opsLorenzo Bianconi3-3/+11
Remove static qualifier from st_lsm6dsx_read_fifo definition and introduce read_fifo function pointer in fifo_ops data structure in order to run the proper read_fifo routine since other compliant devices will use a different FIFO queueing scheme. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: imu: st_lsm6dsx: take into account ts samples in wm configurationLorenzo Bianconi1-7/+6
Take into account hw timer samples in pattern length computation done in st_lsm6dsx_update_watermark routine for watermark configuration. Moreover use samples in pattern (sip) already computed in st_lsm6dsx_update_decimators routine Fixes: 213451076bd3 ("iio: imu: st_lsm6dsx: add hw timestamp support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: dac: ad5758: Add support for hard resetStefan Popa1-2/+24
The ad5758 has a hardware reset active low input pin. This patch adds a devicetree entry for a reset GPIO and a new ad5758_reset() function. During initialization, it is checked if the reset property is specified and the the GPIO is being asserted, therefore the device will become active. When the reset function is called, if the gpio_reset var is set, then the GPIO will be toggled, otherwise a software reset is performed. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: Convert to using %pOFn instead of device_node.nameRob Herring3-9/+9
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: adc: qcom-spmi-adc5: Verify channel numbers from DTMatthias Kaehlcke1-1/+2
The driver only defines a subset of all possible ADC channels. Channel numbers read from the device tree are accepted as long as they don't exceed a max value, even when no channel definition exists. Add a check to abort initialization in this case. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"Matt Ranostay1-1/+0
This reverts commit 535fba29b3e1afef4ba201b3c69a6992583ec0bd. Seems the submitter (er me, hang head in shame) didn't look at the datasheet enough to see that the registers are quite different. This needs to be reverted because a) would never work b) to open it be added to a Maxim RTDs (Resistance Temperature Detectors) under development by author Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: light: isl29501: Simplify code to kill compiler warningGeert Uytterhoeven1-10/+2
With gcc 4.1.2: drivers/iio/proximity/isl29501.c: In function ‘isl29501_register_write’: drivers/iio/proximity/isl29501.c:235: warning: ‘msb’ may be used uninitialized in this function While this is a false positive, it can easily be avoided by removing the "msb" intermediate variable. Remove the "lsb" intermediate variable for consistency. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: adc: sc27xx: Add ADC scale calibrationBaolin Wang1-3/+71
This patch adds support to read calibration values from the eFuse controller to calibrate the ADC channel scales, which can make ADC sample data more accurate. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02iio: adc: sc27xx: Add raw data supportBaolin Wang1-35/+45
The headset device will use channel 20 of ADC controller to detect events, but it needs the raw ADC data to do conversion according to its own formula. Thus we should configure the channel mask separately and configure channel 20 as IIO_CHAN_INFO_RAW, as well as adding raw data read support. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio: dac: ti-dac5571: provide of_match_table to driverMarcus Folkesson1-0/+1
Use the created list of of_device_id's as a match table. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio: dac: mcp4922: fix error handling in mcp4922_write_rawMarcus Folkesson1-3/+8
Do not try to write negative values and make sure that the write goes well. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio: dac: add support for ltc1660Marcus Folkesson3-0/+261
LTC1665/LTC1660 is a 8/10-bit Digital-to-Analog Converter (DAC) with eight individual channels. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio:adxl372: Add filter bandwidth supportStefan Popa1-2/+36
This patch adds the option for the user to select the filter bandwidth. The user can also read the available bandwidths which are always adjusted to be at most half of the sampling frequency. Furthermore, the currently selected bandwidth can be read via the read_raw function, while the write_raw sets a new bandwidth value. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio:adxl372: Add sampling frequency supportStefan Popa1-1/+73
This patch adds the option for the user to select the sampling frequency. Also, the user can read the available frequencies and read the currently set frequency via the read_raw function. The frequency can be set via the write_raw function. When the frequency is set, the bandwidth is also checked and ensured that it is constrained to at most half of the sampling frequency. Also, the activity and inactivity timers have to be updated because they depend on the selected ODR. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio: adxl372: Provide validate_trigger and validate_device callbacksStefan Popa1-0/+13
This patch provides a validate_device callback for the trigger which makes sure that other devices are rejected. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-25iio: chemical: bme680: Remove field value definesDavid Frey2-4/+3
Remove BME680_RUN_GAS_EN_BIT and BME680_NB_CONV_0_VAL field value definitions because the fields are simply boolean and integer respectively. Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-23treewide: convert ISO_8859-1 text comments to utf-8Arnd Bergmann1-1/+1
Almost all files in the kernel are either plain text or UTF-8 encoded. A couple however are ISO_8859-1, usually just a few characters in a C comments, for historic reasons. This converts them all to UTF-8 for consistency. Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms@verge.net.au> [IPVS portion] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [IIO] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Rob Herring <robh@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-21Merge branch 'i2c/for-4.19' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
2018-08-20iio: multiplexer: switch to SPDX license identifierPeter Rosin1-4/+1
Drop the boilerplate license text. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-20iio: dpot-dac: switch to SPDX license identifierPeter Rosin1-4/+1
Drop the boilerplate license text. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-20iio: envelope-detector: switch to SPDX license identifierPeter Rosin1-4/+1
Drop the boilerplate license text. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-20iio: potentiometer: mcp4531: switch to SPDX license identifierPeter Rosin1-5/+2
Drop the boilerplate license text and use the correct MODULE_LICENSE. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-20iio: potentiometer: mcp4018: use the correct MODULE_LICENSEPeter Rosin1-1/+1
The file is GPL v2 only. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: potentiometer: merge calls to of_match_device and of_device_get_match_dataJulia Lawall3-15/+6
Drop call to of_match_device, which is subsumed by the subsequent call to of_device_get_match_data. The code becomes simpler, and a temporary variable can be dropped. The semantic match that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression match; identifier i; expression x, dev, e, e1; @@ - match@i = of_match_device(x, dev); - if (match) e = of_device_get_match_data(dev); - else e = e1; + e = of_device_get_match_data(dev); + if (!e) e = e1; @@ identifier r.i; @@ - const struct of_device_id *i; ... when != i // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: chemical: bme680: Add check for val2 in the write_raw functionHimanshu Jha1-0/+3
val2 is responsible for the floating part of the number to be written to the device. We don't need the floating part while writing the oversampling ratio for BME680 since the available oversampling ratios are pure natural numbers. So, add a sanity check to make sure val2 is 0. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adc: add support for mcp3911Marcus Folkesson3-0/+374
MCP3911 is a dual channel Analog Front End (AFE) containing two synchronous sampling delta-sigma Analog-to-Digital Converters (ADC). Co-developed-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adxl345: move null check for i2c id at start of probeAlexandru Ardelean1-1/+4
Fixes ef89f4b96a2 ("iio: adxl345: Add support for the ADXL375"). This was found via static checker. After looking into the code a bit, it's unlikely that there will be a NULL dereference if the `id` object in that specific code path. However, it's safe to add a NULL (paranoid) check just to make sure and remove any uncertainties. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: max44000: remove unused variable max44000_alstim_shiftColin Ian King1-1/+0
Variable max44000_alstim_shift is defined but is never used hence it is redundant and can be removed. This variable has been like this since the driver was added back in 2016. Cleans up clang warning: warning: 'max44000_alstim_shift' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio:adxl372: Add FIFO and interrupts supportStefan Popa1-1/+356
This patch adds support for the adxl372 FIFO. In order to accomplish this, triggered buffers were used. The number of FIFO samples which trigger the watermark interrupt can be configured by using the buffer watermark. The FIFO format is determined by configuring the scan elements for each axis. The FIFO data is pushed to the IIO device's buffer. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adxl372: New driver for Analog Devices ADXL372 AccelerometerStefan Popa3-0/+537
This patch adds basic support for Analog Devices ADXL372 SPI-Bus Three-Axis Digital Accelerometer. The device is probed and configured the with some initial default values. With this basic driver, it is possible to read raw acceleration data. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adc: qcom-spmi-adc5: Add ADC5_AMUX_THM[24]_100K_PU to rev2 channel listMatthias Kaehlcke1-0/+4
Add ADC5_AMUX_THM2_100K_PU and ADC5_AMUX_THM4_100K_PU to the list of rev2 ADC channels. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adc: max9611: explicitly cast gain_selectorsStefan Agner1-1/+1
After finding a reasonable gain, the function converts the configured gain to a gain configuration option selector enum max9611_csa_gain. Make the conversion clearly visible by using an explicit cast. This also avoids a warning seen with clang: drivers/iio/adc/max9611.c:292:16: warning: implicit conversion from enumeration type 'enum max9611_conf_ids' to different enumeration type 'enum max9611_csa_gain' [-Wenum-conversion] *csa_gain = gain_selectors[i]; ~ ^~~~~~~~~~~~~~~~~ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: dac: mcp4725: avoid using CONFIG_PM_SLEEPMarcus Folkesson1-9/+3
This is already handled by SIMPLE_DEV_PM_OPS(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: dac: max5821: avoid using CONFIG_PM_SLEEPMarcus Folkesson1-8/+3
This is already handled by SIMPLE_DEV_PM_OPS(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: dac: max517: avoid using CONFIG_PM_SLEEPMarcus Folkesson1-8/+3
This is already handled by SIMPLE_DEV_PM_OPS(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19drivers: iio: Update MODULE AUTHOR email addressMichael Hennerich13-13/+13
no functional changes Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: health: max30102: Mark expected switch fall-throughsGustavo A. R. Silva1-2/+4
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I placed the "fall through" annotation at the bottom of the case, which is what GCC is expecting to find. Addresses-Coverity-ID: 1458342 ("Missing break in switch") Addresses-Coverity-ID: 1458345 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: pressure: ms5611: remove deprecated compatible stringsTomasz Duszynski2-4/+0
Compatible strings tend to follow manufacturer,model format. In case one wants to do a matching with manufacturer stripped off he can still do so since SPI/I2C core will try id_table based matching anyway. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: chemical: bme680: simplify oversampling handlingDavid Frey1-63/+36
Temperature, pressure and humidity all expose and oversampling setting that works in the same way. Provide common handling for the oversampling sysfs attributes. Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Powered by cgit, Gruvboxed by Blaster4385.