| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make use of iio_get_masklength) and iio_for_each_active_channel() to
access '.masklength' so it can be annotated as __private when there
are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-20-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-19-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-18-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-17-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-16-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-15-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-14-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Reviewed-by: João Paulo Gonçalves <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-13-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-12-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-11-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-10-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-9-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-8-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-7-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-6-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-5-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-4-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-3-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-2-82913fc0fb87@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-3-8e12cd042906@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Make use of iio_get_masklength) and iio_for_each_active_channel() to
access '.masklength' so it can be annotated as __private when there
are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-2-8e12cd042906@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-1-8e12cd042906@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Internal clock of AD719X devices can be made available on MCLK2 pin. Add
clock provider to support this functionality when clock cells property
is present.
Signed-off-by: Alisa-Dariana Roman <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
There are actually 4 configuration modes of clock source for AD719X
devices. Either a crystal can be attached externally between MCLK1 and
MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
pin. The other 2 modes make use of the 4.92MHz internal clock.
Undocumented properties adi,int-clock-output-enable and adi,clock-xtal
still supported for backward compatibility, but their use is highly
discouraged. Use cleaner alternative of configuring external clock by
using clock names mclk and xtal.
Functionality of AD7192_CLK_INT_CO will be implemented in complementary
patch by adding clock provider.
Signed-off-by: Alisa-Dariana Roman <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This makes use of the new devm_regulator_get_enable_read_voltage()
helper function to reduce boilerplate code in the MCP3911 ADC driver.
The error message is slightly changed since there are fewer error
return paths.
An extra parameter is added to the config callback to avoid adding
state that is not used outside of the probe() function.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Marcus Folkesson <[email protected]>
Link: https://patch.msgid.link/20240712-iio-regulator-refactor-round-3-v1-6-835017bae43d@baylibre.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
This is a new driver for Analog Devices Inc. AD4695 and similar ADCs.
The initial driver supports initializing the chip including configuring
all possible LDO and reference voltage sources as well as any possible
voltage input channel wiring configuration.
Only the 4-wire SPI wiring mode where the CNV pin is tied to the CS pin
is supported at this time. And reading sample data from the ADC can only
be done in direct mode for now.
Co-developed-by: Ramona Gradinariu <[email protected]>
Signed-off-by: Ramona Gradinariu <[email protected]>
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Wrong compatible strings are used for AD411x devices.
Fix by adding the missing "adi," prefix.
Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The current implementation attempts to recover from an eventual glitch
in the clock by checking frstdata state after reading the first
channel's sample: If frstdata is low, it will reset the chip and
return -EIO.
This will only work in parallel mode, where frstdata pin is set low
after the 2nd sample read starts.
For the serial mode, according to the datasheet, "The FRSTDATA output
returns to a logic low following the 16th SCLK falling edge.", thus
after the Xth pulse, X being the number of bits in a sample, the check
will always be true, and the driver will not work at all in serial
mode if frstdata(optional) is defined in the devicetree as it will
reset the chip, and return -EIO every time read_sample is called.
Hence, this check must be removed for serial mode.
Fixes: b9618c0cacd7 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Signed-off-by: Guillaume Stols <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Switching to guard simplifies the code and avoids to take care to
unlock the mutex in case of premature return.
Signed-off-by: Guillaume Stols <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The binding's documentation specifies that "As the line is active low, it
should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled
the opposite way. This commit sets the driver's behaviour in sync with the
documentation
Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API")
Signed-off-by: Guillaume Stols <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
gpiod_set_array_value was misused here: the implementation relied on the
assumption that an unsigned long was required for each gpio, while the
function expects a bit array stored in "as much unsigned long as needed
for storing one bit per GPIO", i.e it is using a bit field.
This leaded to incorrect parameter passed to gpiod_set_array_value, that
would set 1 value instead of 3.
It also prevents to select the software mode correctly for the AD7606B.
Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC")
Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro")
Signed-off-by: Guillaume Stols <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add support for new devices:
* Analog Devices AD9652 16-bit 310 MSPS ADC;
* Analog Devices AD9643 14-Bit, 170/210/250 MSPS ADC;
* Analog Devices AD9649 14-bit 20/40/65/80 MSPS ADC.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
If there's only one possible scale, there's no way to change the Vref
select in the device so avoid reading the register in ad9467_get_scale().
In this case, it makes no sense to provide the .read_available()
callback nor allowing for writing the scale attribute.
Note this is in preparation for supporting a new device that only has
one possible scale.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add new variables to the per chip info structure:
* test_points: Number of valid test points for calibration;
* has_dco_invert: Supports inverting DCO (Data clock output) polarity;
* dco_en: Specicic mask to enable DCO delays.
This is in preparation for supporting new parts with subtle differences
in how to configure the hardware.
Note that with the new test_points variable, we also add a new
calib_map_size to 'struct ad9467_state' so we know our map size
depending on how many test points we have and if we can run the
calibration in the inverted state or not.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The calibration process mixes the support for calibrating multiple
channels with only having one channel. Some paths do have 'num_channels'
into account while others don't.
As of now, the driver only supports devices with one channel so the
above is not really a problem. That said, we'll add support for devices
with more than one channel, hence let's properly make the calibration
process to work with it.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Allocate the memory with scoped/cleanup.h to reduce error handling and
make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
`ad7091r8_regmap_bus` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <[email protected]>
Reviewed-by: Marcelo Schmitt <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-18-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Make use of iio_get_masklength) and iio_for_each_active_channel() to
access '.masklength' so it can be annotated as __private when there
are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-17-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-16-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-15-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <[email protected]>
Reviewed-by: Alexandru Ardelean <[email protected]>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-14-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <[email protected]> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <[email protected]> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <[email protected]> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <[email protected]> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <[email protected]> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <[email protected]> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <[email protected]> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <[email protected]> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <[email protected]> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <[email protected]> # clk
Signed-off-by: Luca Ceresoli <[email protected]>
Acked-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
|
|
Move the definition down and make it a boolean that is initialized
to false.
Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add a driver to support reading the Auxiliary ADC IP found in the
MediaTek MT6357, MT6358 and MT6359 Power Management ICs, featuring
a different register layout, configuration reset and ADC reading
sequence from the other already supported MediaTek SoC or PMIC
(aux)ADC HW.
This driver provides multiple ADC channels for system monitoring,
such as battery voltage, PMIC temperature, PMIC-internal voltage
regulators temperature, and others.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
We need the char/misc/iio fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|