| Age | Commit message (Collapse) | Author | Files | Lines |
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.8-2024-01-18:
amdgpu:
- DSC fixes
- DC resource pool fixes
- OTG fix
- DML2 fixes
- Aux fix
- GFX10 RLC firmware handling fix
- Revert a broken workaround for SMU 13.0.2
- DC writeback fix
- Enable gfxoff when ROCm apps are active on gfx11 with the proper FW version
amdkfd:
- Fix dma-buf exports using GEM handles
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some of our existing Xe_LPG workarounds and tuning are also applicable
to the version 12.74 variant. Extend the condition bounds accordingly.
Also fix the comment on Wa_14018575942 while we're at it.
v2: Extend some more workarounds (Harish)
Signed-off-by: Matt Roper <[email protected]>
Signed-off-by: Harish Chegondi <[email protected]>
Signed-off-by: Haridhar Kalvala <[email protected]>
Reviewed-by: Matt Atwood <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Xe_LPG+ (IP version 12.74) should take the same general code
paths as Xe_LPG (versions 12.70 and 12.71).
Xe_LPG+'s workaround list will be handled by the next patch.
Signed-off-by: Harish Chegondi <[email protected]>
Signed-off-by: Haridhar Kalvala <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
|
|
In function write_pgtable, the calculation of chunk in the do-while
loop is wrong, we should always compare against remaining size instead
of the total size update->qwords.
Signed-off-by: Fei Yang <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On GFX version 11, GFXOFF was disabled due to a MES KIQ firmware
issue, which has since been fixed after version 64.
This patch only re-enables GFXOFF for GFX version 11 if the GPU's
MES KIQ firmware version is newer than version 64.
V2: Keep GFXOFF disabled on GFX11 if MES KIQ is below version 64.
V3: Add parentheses to avoid GCC warning for parentheses:
"suggest parentheses around comparison in operand of ‘&’"
V4: Remove "V3" from commit title
V5: Change commit description and insert 'Acked-by'
Signed-off-by: Ori Messinger <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Harish Kasiviswanathan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
writeback requests.
Return value of 'to_amdgpu_crtc' which is container_of(...) can't be
null, so it's null check 'acrtc' is dropped.
Fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9302 amdgpu_dm_atomic_commit_tail() error: we previously assumed 'acrtc' could be null (see line 9299)
Added 'new_crtc_state' NULL check for function
'drm_atomic_get_new_crtc_state' that retrieves the new state for a CRTC,
while enabling writeback requests.
Cc: [email protected]
Cc: Alex Hung <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Hamza Mahfooz <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Hung <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Calling amdgpu_device_ip_resume_phase1() during shutdown leaves the
HW in an active state and is an unbalanced use of the IP callbacks.
Using the IP callbacks like this can lead to memory leaks, double
free and imbalanced reference counters.
Leaving the HW in an active state can lead to DMA accesses to memory now
freed by the driver.
Both is a complete no-go for driver unload so completely revert the
workaround for now.
This reverts commit f5c7e7797060255dbc8160734ccc5ad6183c5e04.
Signed-off-by: Christian König <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
otherwise drm_client_dev_unregister() would try to
kfree(&adev->kfd.client).
Fixes: 1819200166ce ("drm/amdkfd: Export DMABufs from KFD using GEM handles")
Signed-off-by: Flora Cui <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
populate_dml_output_cfg_from_stream_state()
It is likely that the statement related to 'dml_edp' is misplaced. So move
it in the correct "case SIGNAL_TYPE_EDP".
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
If the RLC firmware is invalid because of wrong header size,
the pointer to the rlc firmware is released in function
amdgpu_ucode_request. There will be a null pointer error
in subsequent use. So skip validation to fix it.
Fixes: 3da9b71563cb ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX10")
Signed-off-by: Ma Jun <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
[Why]
For usb4 connector, AUX transaction is handled by dmub utilizing a differnt
code path comparing to legacy DP connector. If the usb4 DP connector is
disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev
fail.
[How]
Align the error code with the one reported by legacy DP as EIO.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
core_mode_programming in DML2 should output watermark calculations
to locals, but it incorrectly uses mode_lib
[How]
update code to match HW DML2
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Ovidiu Bunea <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Not clearing the memory select bits prior to OPTC disable can cause DSC
corruption issues when attempting to reuse a memory instance for another
OPTC that enables ODM.
[How]
Clear the memory select bits prior to disabling an OPTC.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Ilya Bakoulin <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.
[How]
Port the DCN35 fixes to DCN314.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
When mapping resources, resources could be unavailable.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Sung joon Kim <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
res_pool is not initialized in all situations such as virtual
environments, and therefore link encoder resources should not be
initialized if res_pool is NULL.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Dillon Varone <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc'
was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc'
NULL pointer check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903)
Cc: [email protected]
Cc: Aurabindo Pillai <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Hamza Mahfooz <[email protected]>
Cc: Wenjing Liu <[email protected]>
Cc: Qingqing Zhuo <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v1:
enable amdgpu smu driver message log.
v2:
add smu/pmfw response value into debug log.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Kenneth Feng <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Deferred error is also taken into account.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Why:
The PCI error slot reset maybe triggered after inject ue to UMC multi times, this
caused system hang.
[ 557.371857] amdgpu 0000:af:00.0: amdgpu: GPU reset succeeded, trying to resume
[ 557.373718] [drm] PCIE GART of 512M enabled.
[ 557.373722] [drm] PTB located at 0x0000031FED700000
[ 557.373788] [drm] VRAM is lost due to GPU reset!
[ 557.373789] [drm] PSP is resuming...
[ 557.547012] mlx5_core 0000:55:00.0: mlx5_pci_err_detected Device state = 1 pci_status: 0. Exit, result = 3, need reset
[ 557.547067] [drm] PCI error: detected callback, state(1)!!
[ 557.547069] [drm] No support for XGMI hive yet...
[ 557.548125] mlx5_core 0000:55:00.0: mlx5_pci_slot_reset Device state = 1 pci_status: 0. Enter
[ 557.607763] mlx5_core 0000:55:00.0: wait vital counter value 0x16b5b after 1 iterations
[ 557.607777] mlx5_core 0000:55:00.0: mlx5_pci_slot_reset Device state = 1 pci_status: 1. Exit, err = 0, result = 5, recovered
[ 557.610492] [drm] PCI error: slot reset callback!!
...
[ 560.689382] amdgpu 0000:3f:00.0: amdgpu: GPU reset(2) succeeded!
[ 560.689546] amdgpu 0000:5a:00.0: amdgpu: GPU reset(2) succeeded!
[ 560.689562] general protection fault, probably for non-canonical address 0x5f080b54534f611f: 0000 [#1] SMP NOPTI
[ 560.701008] CPU: 16 PID: 2361 Comm: kworker/u448:9 Tainted: G OE 5.15.0-91-generic #101-Ubuntu
[ 560.712057] Hardware name: Microsoft C278A/C278A, BIOS C2789.5.BS.1C11.AG.1 11/08/2023
[ 560.720959] Workqueue: amdgpu-reset-hive amdgpu_ras_do_recovery [amdgpu]
[ 560.728887] RIP: 0010:amdgpu_device_gpu_recover.cold+0xbf1/0xcf5 [amdgpu]
[ 560.736891] Code: ff 41 89 c6 e9 1b ff ff ff 44 0f b6 45 b0 e9 4f ff ff ff be 01 00 00 00 4c 89 e7 e8 76 c9 8b ff 44 0f b6 45 b0 e9 3c fd ff ff <48> 83 ba 18 02 00 00 00 0f 84 6a f8 ff ff 48 8d 7a 78 be 01 00 00
[ 560.757967] RSP: 0018:ffa0000032e53d80 EFLAGS: 00010202
[ 560.763848] RAX: ffa00000001dfd10 RBX: ffa0000000197090 RCX: ffa0000032e53db0
[ 560.771856] RDX: 5f080b54534f5f07 RSI: 0000000000000000 RDI: ff11000128100010
[ 560.779867] RBP: ffa0000032e53df0 R08: 0000000000000000 R09: ffffffffffe77f08
[ 560.787879] R10: 0000000000ffff0a R11: 0000000000000001 R12: 0000000000000000
[ 560.795889] R13: ffa0000032e53e00 R14: 0000000000000000 R15: 0000000000000000
[ 560.803889] FS: 0000000000000000(0000) GS:ff11007e7e800000(0000) knlGS:0000000000000000
[ 560.812973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 560.819422] CR2: 000055a04c118e68 CR3: 0000000007410005 CR4: 0000000000771ee0
[ 560.827433] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 560.835433] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 560.843444] PKRU: 55555554
[ 560.846480] Call Trace:
[ 560.849225] <TASK>
[ 560.851580] ? show_trace_log_lvl+0x1d6/0x2ea
[ 560.856488] ? show_trace_log_lvl+0x1d6/0x2ea
[ 560.861379] ? amdgpu_ras_do_recovery+0x1b2/0x210 [amdgpu]
[ 560.867778] ? show_regs.part.0+0x23/0x29
[ 560.872293] ? __die_body.cold+0x8/0xd
[ 560.876502] ? die_addr+0x3e/0x60
[ 560.880238] ? exc_general_protection+0x1c5/0x410
[ 560.885532] ? asm_exc_general_protection+0x27/0x30
[ 560.891025] ? amdgpu_device_gpu_recover.cold+0xbf1/0xcf5 [amdgpu]
[ 560.898323] amdgpu_ras_do_recovery+0x1b2/0x210 [amdgpu]
[ 560.904520] process_one_work+0x228/0x3d0
How:
In RAS recovery, mode-1 reset is issued from RAS fatal error handling and expected
all the nodes in a hive to be reset. no need to issue another mode-1 during this procedure.
Signed-off-by: Stanley.Yang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Show deferred error count for UMC syfs node
Signed-off-by: Stanley.Yang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
On GFX version 11, GFXOFF was disabled due to a MES KIQ firmware
issue, which has since been fixed after version 64.
This patch only re-enables GFXOFF for GFX version 11 if the GPU's
MES KIQ firmware version is newer than version 64.
V2: Keep GFXOFF disabled on GFX11 if MES KIQ is below version 64.
V3: Add parentheses to avoid GCC warning for parentheses:
"suggest parentheses around comparison in operand of ‘&’"
V4: Remove "V3" from commit title
V5: Change commit description and insert 'Acked-by'
Signed-off-by: Ori Messinger <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Harish Kasiviswanathan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
fix array index out of bounds issue for ras_block_string[] array.
Fixes: 30df05fb74f6 ("drm/amdgpu: Align ras block enum with firmware")
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Submit command of wreg in GFX and COMPUTE ring to update
RLC_SPM_MC_CNT in guest machine during runtime.
Signed-off-by: YuanShang <[email protected]>
Reviewed-by: Emily Deng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
writeback requests.
Return value of 'to_amdgpu_crtc' which is container_of(...) can't be
null, so it's null check 'acrtc' is dropped.
Fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9302 amdgpu_dm_atomic_commit_tail() error: we previously assumed 'acrtc' could be null (see line 9299)
Added 'new_crtc_state' NULL check for function
'drm_atomic_get_new_crtc_state' that retrieves the new state for a CRTC,
while enabling writeback requests.
Cc: [email protected]
Cc: Alex Hung <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Hamza Mahfooz <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Alex Hung <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
A static checker pointed out, that bo_va->base.bo was already derefenced
earlier in the same scope. Therefore this check is unnecessary here.
Reported-by: Dan Carpenter <[email protected]>
Fixes: 50661eb1a2c8 ("drm/amdgpu: Auto-validate DMABuf imports in compute VMs")
Reviewed-by: Kent Russell <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Calling amdgpu_device_ip_resume_phase1() during shutdown leaves the
HW in an active state and is an unbalanced use of the IP callbacks.
Using the IP callbacks like this can lead to memory leaks, double
free and imbalanced reference counters.
Leaving the HW in an active state can lead to DMA accesses to memory now
freed by the driver.
Both is a complete no-go for driver unload so completely revert the
workaround for now.
This reverts commit f5c7e7797060255dbc8160734ccc5ad6183c5e04.
Signed-off-by: Christian König <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
otherwise drm_client_dev_unregister() would try to
kfree(&adev->kfd.client).
Fixes: 1819200166ce ("drm/amdkfd: Export DMABufs from KFD using GEM handles")
Signed-off-by: Flora Cui <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
populate_dml_output_cfg_from_stream_state()
It is likely that the statement related to 'dml_edp' is misplaced. So move
it in the correct "case SIGNAL_TYPE_EDP".
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space required after that ',' (ctx:VxV)
ERROR: spaces required around that '>' (ctx:VxV)
ERROR: spaces required around that '<' (ctx:VxV)
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
ERROR: trailing statements should be on next lineo
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space required before the open parenthesis '('
Signed-off-by: XueBing Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: space prohibited before open square bracket '['
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space prohibited before that close parenthesis ')'
ERROR: need consistent spacing around '<<' (ctx:WxV)
ERROR: need consistent spacing around '-' (ctx:WxV)
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: spaces required around that '=' (ctx:VxW)
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space prohibited after that open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
ERROR: spaces required around that '&=' (ctx:WxO)
ERROR: space required before that '~' (ctx:OxV)
ERROR: space prohibited before that close parenthesis ')'
ERROR: space required after that ',' (ctx:WxO)
ERROR: space required before that '&' (ctx:OxV)
ERROR: need consistent spacing around '*' (ctx:VxW)
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: open brace '{' following union go on the same line
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|