| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The high three bits of ras features mask indicate socket
id, it should skip to check high three bits of ras features
mask before disable all ras features.
Signed-off-by: Stanley.Yang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Preparing for asynchronous processing of umc page retirement.
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add log info for umc_v12_0.
v2:
Delete redundant logs.
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
voltage_parameters is a point to a struct of type
SET_VOLTAGE_PARAMETERS_V1_3. Passing just voltage_parameters would
not print the right size of the struct variable. So we need to pass
*voltage_parameters to sizeof().
Fixes: 4630d5031cd8 ("drm/amdgpu: check PS, WS index")
Signed-off-by: Samasth Norway Ananda <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
- Enable the seq64 mapping sequence.
- Fix wflinfo va conflict and other bugs.
v1:
- The seq64 area needs to be included in the AMDGPU_VA_RESERVED_SIZE
otherwise the areas will conflict with user space allocations (Alex)
- It needs to be mapped read only in the user VM (Alex)
v2:
- Instead of just one define for TOP/BOTTOM
reserved space separate them into two (Christian)
- Fix the CPU and VA calculations and while at it
also cleanup error handling and kerneldoc (Christian)
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Arunpravin Paneer Selvam <[email protected]>
Reviewed-by: Christian König <[email protected]>
|
|
'leakage_table' will always be successfully initialized as a pointer
to '&rdev->pm.dpm.dyn_state.cac_leakage_table'.
Remove unnecessary check if only to silence static checkers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool Svace.
Fixes: 69e0b57a91ad ("drm/radeon/kms: add dpm support for cayman (v5)")
Signed-off-by: Nikita Zhandarovich <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Inside the if block with (running == 0), the checks for 'running'
possibly being non-zero are redundant. Remove them altogether.
This change is similar to the one authored by Heinrich Schuchardt
<[email protected]> in commit
ddbbd3be9679 ("drm/radeon: remove dead code, si_mc_load_microcode (v2)")
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool Svace.
Fixes: 0af62b016804 ("drm/radeon/kms: add ucode loader for NI")
Signed-off-by: Nikita Zhandarovich <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Stephen Rothwell reported htmldocs warnings when merging drm-intel
tree:
Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5484: ERROR: Unexpected indentation.
Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5488: WARNING: Block quote ends without a blank line; unexpected unindent.
Separate @failing_port return value list by surrounding it with a
blank line to fix above warnings.
Fixes: 1cd0a5ea427931 ("drm/dp_mst: Factor out a helper to check the atomic state of a topology manager")
Reported-by: Stephen Rothwell <[email protected]>
Closes: https://lore.kernel.org/linux-next/[email protected]/
Signed-off-by: Bagas Sanjaya <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
This reverts commit cfeff354f70bb1d0deb0279506e3f7989bc16e28.
A core design consideration with legacy cursor updates is that the
cursor must not touch any other plane, even if we were to force it
to take the slow path. That is the real reason why the cursor uses
a fixed ddb allocation, not because bspec says so.
Treating cursors as any other plane during ddb allocation
violates that, which means we can now pull other planes into
fully unsynced legacy cursor mailbox commits. That is
definitely not something we've ever considered when designing
the rest of the code. The noarm+arm register write split in
particular makes that dangerous as previous updates can get
disarmed pretty much at any random time, and not necessarily
in an order that is actually safe (eg. against ddb overlaps).
So if we were to do this then:
- someone needs to expend the appropriate amount of brain
cells thinking through all the tricky details
- we should do it for all skl+ platforms since all
of those have double buffered wm/ddb registers. The current
arbitrary mtl+ cutoff doesn't really make sense
For the moment just go back to the original behaviour where
the cursor's ddb alloation does not change outside of
modeset/fastset. As of now anything else isn't safe.
Cc: Stanislav Lisovskiy <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Stanislav Lisovskiy <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
|
|
Our legacy cursor updates are actually mailbox updates.
Ie. the hardware latches things once per frame on start of
vblank, but we issue an number of updates per frame,
withough any attempt to synchronize against the vblank
in software. So in theory only the last update issued
during the frame will latch, and the previous ones are
discarded.
However this can lead to problems with maintaining the
ggtt/iommu mappings as we have no idea which updates
will actually latch.
The problem is exacerbated by the hardware's annoying disarming
behaviour; any non-arming register write will disarm an already
armed update, only to be rearmed later by the arming register
(CURBASE in case of cursors). If a disarming write happens
just before the start of vblank, and the arming write happens
after start of vblank we have effectively prevented the hardware
from latching anything. And if we manage to straddle multiple
sequential vblank starts in this manner we effectively prevent
the hardware from latching any new registers for an arbitrary
amount of time. This provides more time for the (potentially
still in use by the hardware) gtt/iommu mappings to be torn
down.
A partial solution, of course, is to use vblank evasion to
avoid the register writes from spreading on both sides of
the start of vblank.
I've previously highlighted this problem as a general issue
affecting mailbox updates. I even added some notes to the
{i9xx,skl}_crtc_planes_update_arm() to remind us that the noarm
and arm phases both need to pulled into the vblank evasion
critical section if we actually decided to implement mailbox
updates in general. But as I never impelemented the noarm+arm
split for cursors we don't have to worry about that for the
moment.
We've been lucky enough so far that this hasn't really caused
problems. One thing that does help is that Xorg generally
sticks to the same cursor BO. But igt seems pretty good at
hitting this on MTL now, so apparently we have to start
thinking about this.
v2: Wait for PSR exit to avoid the vblank evasion timeout (1ms)
tripping due to PSR exit latency (~5ms typically)
Reviewed-by: Uma Shankar <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jouni Högander <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
|
|
intel_vblank.c seems like the appropriate place for the core
vblank evasion code. Move it there.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
There isn't really any reason to make the caller suffer through
checking the vblank evasion min/max scanlines. If we somehow
ended up with bogus values (which really shouldn't happen)
then just skip the actual vblank evasion loop but otherwise
plow ahead as normal.
The only "real" change is that we now get+put a vblank reference
even if the min/max values are bogus, previously we skipped
directly to the end.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
Pull the core vblank evasion loop into its own function,
so that we can reuse it elsewhere later.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
Pull the need_vlv_dsi_wa details into intel_vblank_evade_init()
so that caller doesn't have to care about it.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
Collect the information needed for vblank evasions into
a structure that we can pass around more easily.
And let's rename intel_crtc_vblank_evade_scanlines() to just
intel_vblank_evade_init() so that better describes the intended
usage of initializing the context.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
Drop the vblank reference only after we've done the hideous
need_vlv_dsi_wa stuff. This will make it easier to reuse the
the vblank evasion machinery elsewhere.
Keeping the vblank reference for a bit longer is not a
problem. In fact we might want to not drop it at all until
intel_pipe_update_end(), but we'll leave that idea for later.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
We'll be needing to do vblank evasion around legacy cursor updates,
which don't have the intel_atomic_state around. So let's remove
this dependency on a full commit and pass the crtc state in by hand.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
Fix xe_vm_create_ioctl routine not freeing the vm-id allocated to it
when the function fails.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Moti Haimovski <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Tomer Tayar <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Similar to commit 26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"). Add a mutex to ensure that aux transfer
won't race with atomic_disable by holding the PM reference and prevent
the bridge from suspend.
Also we need to use pm_runtime_put_sync_suspend() to suspend the bridge
instead of idle with pm_runtime_put_sync().
Fixes: 3203e497eb76 ("drm/bridge: anx7625: Synchronously run runtime suspend.")
Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <[email protected]>
Tested-by: Xuxin Xiong <[email protected]>
Reviewed-by: Pin-yen Lin <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The relatively recently introduced drm/exec utility was using uint32_t
in its interface, which was then also carried over to drm/gpuvm.
Prefer u32 in new code and update drm/exec and drm/gpuvm accordingly.
Cc: Christian König <[email protected]>
Cc: Danilo Krummrich <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Danilo Krummrich <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The patch completes the setting of CLKLANE_STOP for the imx8m{m,n,p}
platforms (i. e. not exynos).
Co-developed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The synaptics-r63353 (panel-bridge) can only be configured in command mode.
So, samsung-dsim (bridge) must not be in display mode during the
prepare()/unprepare() of the panel-bridge. Setting the
"pre_enable_prev_first" flag to true allows the prepare() of the
panel-bridge to be called between the pre_enabled() and enabled() of the
bridge. So, the bridge can enter display mode only in the enabled().
The unprepare() of the panel-bridge is instead called between the disable()
and post_disable() of the bridge. So, the disable() must exit the display
mode (i .e. enter command mode) to allow the panel-bridge to receive DSI
commands.
samsung_dsim_atomic_pre_enable -> command mode
r63353_panel_prepare -> send DSI commands
samsung_dsim_atomic_enable -> enter display mode
samsung_dsim_atomic_disable -> exit display mode (command mode)
r63353_panel_unprepare -> send DSI commands
samsung_dsim_atomic_post_disable
Co-developed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Seems to be unused.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The pat table entry associated with XE_CACHE_WB is coherent whereas
XE_CACHE_NONE is non coherent. Migration expects the coherency
with cpu therefore use the coherent entry XE_CACHE_WB for
buffers not supporting compression. For read/write to flat ccs region
the issue is not related to coherency with cpu. The hardware expects
the pat index associated with GPUVA for indirect access to be
compression enabled hence use XE_CACHE_NONE_COMPRESSION.
v2
- Fix the argument to emit_pte, pass the bool directly. (Thomas)
v3
- Rebase
- Update commit message (Matt)
v4
- Add a Fixes: tag. (Thomas)
Cc: Matt Roper <[email protected]>
Cc: Thomas Hellström <[email protected]>
Fixes: 65ef8dbad1db ("drm/xe/xe2: Update emit_pte to use compression enabled PAT index")
Signed-off-by: Himal Prasad Ghimiray <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Let's kickstart the 6.8 fix cycle.
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Do not forget to call clk_disable_unprepare() on the first element of
ctx->clocks array.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 8b7d3ec83aba ("drm/exynos: gsc: Convert driver to IPP v2 core API")
Signed-off-by: Fedor Pchelkin <[email protected]>
Reviewed-by: Marek Szyprowski <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
|
|
gcc rightfully complains about excessive stack usage in the fimd_win_set_pixfmt()
function:
drivers/gpu/drm/exynos/exynos_drm_fimd.c: In function 'fimd_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos_drm_fimd.c:750:1: error: the frame size of 1032 bytes is larger than 1024 byte
drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos5433_drm_decon.c:381:1: error: the frame size of 1032 bytes is larger than 1024 bytes
There is really no reason to copy the large exynos_drm_plane
structure to the stack before using one of its members, so just
use a pointer instead.
Fixes: 6f8ee5c21722 ("drm/exynos: fimd: Make plane alpha configurable")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Marek Szyprowski <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
|
|
Fix incorrect type issue in fimd_commit() of exynos_drm_fimd.c module.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Inki Dae <[email protected]>
|
|
Now that all the issues with 32bits are fixed, enable it again.
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Cast the pointer to unsigned long and let it be implicitly extended to
u64. This fixes the build on 32bits arch.
Cc: Matthew Brost <[email protected]>
Cc: Niranjana Vishwanathapura <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
readq() is not available in 32bits and i915_gem_object_read_from_page()
is supposed to allow reading arbitrary sizes determined by the `size`
argument. Currently the only caller only passes a size == 8 so the
second problem is not that big. Migrate to calling
memcpy()/memcpy_fromio() to allow possible changes in the display side
and to fix the build on 32b architectures.
v2: Use memcpy/memcpy_fromio directly rather than using iosys-map with
the same size == 8 bytes restriction (Matt Roper)
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
resource_size_t uses %pa format in printk since the size varies
depending on build options. However to keep the io_size/physical_size
addition in the same call we can't pass the address without adding yet
another variable in these function. Simply cast it to u64 and keep using
%llx.
Fixes: 286089ce6929 ("drm/xe: Improve vram info debug printing")
Cc: Oak Zeng <[email protected]>
Cc: Michael J. Ruhl <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use DIV_ROUND_UP_ULL() so it also works on 32bit build.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull more drm fixes from Dave Airlie:
"This is mostly amdgpu and xe fixes, with an amdkfd and nouveau fix
thrown in.
The amdgpu ones are just the usual couple of weeks of fixes. The xe
ones are bunch of cleanups for the new xe driver, the fix you put in
on the merge commit and the kconfig fix that was hiding the problem
from me.
amdgpu:
- DSC fixes
- DC resource pool fixes
- OTG fix
- DML2 fixes
- Aux fix
- GFX10 RLC firmware handling fix
- Revert a broken workaround for SMU 13.0.2
- DC writeback fix
- Enable gfxoff when ROCm apps are active on gfx11 with the proper FW
version
amdkfd:
- Fix dma-buf exports using GEM handles
nouveau:
- fix a unneeded WARN_ON triggering
xe:
- Fix for definition of wakeref_t
- Fix for an error code aliasing
- Fix for VM_UNBIND_ALL in the case there are no bound VMAs
- Fixes for a number of __iomem address space mismatches reported by
sparse
- Fixes for the assignment of exec_queue priority
- A Fix for skip_guc_pc not taking effect
- Workaround for a build problem on GCC 11
- A couple of fixes for error paths
- Fix a Flat CCS compression metadata copy issue
- Fix a misplace array bounds checking
- Don't have display support depend on EXPERT (as discussed on IRC)"
* tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm: (71 commits)
nouveau/vmm: don't set addr on the fail path to avoid warning
drm/amdgpu: Enable GFXOFF for Compute on GFX11
drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for writeback requests.
drm/amdgpu: revert "Adjust removal control flow for smu v13_0_2"
drm/amdkfd: init drm_client with funcs hook
drm/amd/display: Fix a switch statement in populate_dml_output_cfg_from_stream_state()
drm/amdgpu: Fix the null pointer when load rlc firmware
drm/amd/display: Align the returned error code with legacy DP
drm/amd/display: Fix DML2 watermark calculation
drm/amd/display: Clear OPTC mem select on disable
drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A
drm/amd/display: Add logging resource checks
drm/amd/display: Init link enc resources in dc_state only if res_pool presents
drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()'
drm/amd/display: Avoid enum conversion warning
drm/amd/pm: Fix smuv13.0.6 current clock reporting
drm/amd/pm: Add error log for smu v13.0.6 reset
drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()'
drm/amdgpu: drop exp hw support check for GC 9.4.3
drm/amdgpu: move debug options init prior to amdgpu device init
...
|
|
Declaring a struct and immediately zeroing it with memset()
seems a bit silly to me. Just zero initialize the struct
when declaring it.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Mika Kahola <[email protected]>
|
|
On HSW non-ULT (or at least on Dell Latitude E6540) external displays
start to flicker when we enable PSR on the eDP. We observe a much higher
SR and PC6 residency than should be possible with an external display,
and indeen much higher than what we observe with eDP disabled and
only the external display enabled. Looks like the hardware is somehow
ignoring the fact that the external display is active during PSR.
I wasn't able to redproduce this on my HSW ULT machine, or BDW.
So either there's something specific about this particular laptop
(eg. some unknown firmware thing) or the issue is limited to just
non-ULT HSW systems. All known registers that could affect this
look perfectly reasonable on the affected machine.
As a workaround let's unmask the LPSP event to prevent PSR entry
except while in LPSP mode (only pipe A + eDP active). This
will prevent PSR entry entirely when multiple pipes are active.
The one slight downside is that we now also prevent PSR entry
when driving eDP with pipe B or C, but I think that's a reasonable
tradeoff to avoid having to implement a more complex workaround.
Cc: [email protected]
Fixes: 783d8b80871f ("drm/i915/psr: Re-enable PSR1 on hsw/bdw")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10092
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jouni Högander <[email protected]>
|
|
This information is already present at
/sys/kernel/debug/dri/0/gt0/uc/guc_log if needed.
v2: add missing chunk
v3: remove spurious line
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Print xe->info.skip_guc_pc in xe info
Cc: Anshuman Gupta <[email protected]>
Signed-off-by: Badal Nilawar <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
All of the attributes, as well as the array of attributes, can be const
and placed in rodata.
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Place the function pointers in rodata.
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Make hwmon_info a const array of const pointers, and let it be placed in
rodata.
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
The irq_chip definition can be const, make it so.
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
Place the function pointers in rodata. Also drop the extra declaration
while at it.
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
|
|
drm_gem_private_object_init expect the object size be page size
aligned. The xe_bo create functions do not update the size for
any alignment requirements. So align cfb size to be page size
aligned in xe stolen memory handling.
Signed-off-by: Vinod Govindapillai <[email protected]>
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Mika Kahola <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Include <linux/of.h> instead of <linux/of_device.h> to fix
below compilation errors:
drivers/gpu/drm/panel/panel-novatek-nt36672e.c:564:14: error: implicit declaration of function 'of_device_get_match_data'
ctx->desc = of_device_get_match_data(dev);
^
drivers/gpu/drm/panel/panel-novatek-nt36672e.c:622:34: error: array type has incomplete element type 'struct of_device_id'
static const struct of_device_id nt36672e_of_match[] = {
^
Signed-off-by: Ritesh Kumar <[email protected]>
Fixes: ea4f9975625a ("drm/panel: Add support for Novatek NT36672E panel driver")
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This adds a DMI orientation quirk for the GPD Win Mini panel.
Signed-off-by: Samuel Dionne-Riel <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix for definition of wakeref_t
- Fix for an error code aliasing
- Fix for VM_UNBIND_ALL in the case there are no bound VMAs
- Fixes for a number of __iomem address space mismatches reported by sparse
- Fixes for the assignment of exec_queue priority
- A Fix for skip_guc_pc not taking effect
- Workaround for a build problem on GCC 11
- A couple of fixes for error paths
- Fix a Flat CCS compression metadata copy issue
- Fix a misplace array bounds checking
- Don't have display support depend on EXPERT (as discussed on IRC)
Signed-off-by: Dave Airlie <[email protected]>
From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m?= <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
nvif_vmm_put gets called if addr is set, but if the allocation
fails we don't need to call put, otherwise we get a warning like
[523232.435671] ------------[ cut here ]------------
[523232.435674] WARNING: CPU: 8 PID: 1505697 at drivers/gpu/drm/nouveau/nvif/vmm.c:68 nvif_vmm_put+0x72/0x80 [nouveau]
[523232.435795] Modules linked in: uinput rfcomm snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr bnep sunrpc binfmt_misc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common iwlmvm nfit libnvdimm vfat fat x86_pkg_temp_thermal intel_powerclamp mac80211 snd_soc_avs snd_soc_hda_codec coretemp snd_hda_ext_core snd_soc_core snd_hda_codec_realtek kvm_intel snd_hda_codec_hdmi snd_compress snd_hda_codec_generic ac97_bus snd_pcm_dmaengine snd_hda_intel libarc4 snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm iwlwifi snd_hda_core btusb snd_hwdep btrtl snd_seq btintel irqbypass btbcm rapl snd_seq_device eeepc_wmi btmtk intel_cstate iTCO_wdt cfg80211 snd_pcm asus_wmi bluetooth intel_pmc_bxt iTCO_vendor_support snd_timer ledtrig_audio pktcdvd snd mei_me
[523232.435828] sparse_keymap intel_uncore i2c_i801 platform_profile wmi_bmof mei pcspkr ioatdma soundcore i2c_smbus rfkill idma64 dca joydev acpi_tad loop zram nouveau drm_ttm_helper ttm video drm_exec drm_gpuvm gpu_sched crct10dif_pclmul i2c_algo_bit nvme crc32_pclmul crc32c_intel drm_display_helper polyval_clmulni nvme_core polyval_generic e1000e mxm_wmi cec ghash_clmulni_intel r8169 sha512_ssse3 nvme_common wmi pinctrl_sunrisepoint uas usb_storage ip6_tables ip_tables fuse
[523232.435849] CPU: 8 PID: 1505697 Comm: gnome-shell Tainted: G W 6.6.0-rc7-nvk-uapi+ #12
[523232.435851] Hardware name: System manufacturer System Product Name/ROG STRIX X299-E GAMING II, BIOS 1301 09/24/2021
[523232.435852] RIP: 0010:nvif_vmm_put+0x72/0x80 [nouveau]
[523232.435934] Code: 00 00 48 89 e2 be 02 00 00 00 48 c7 04 24 00 00 00 00 48 89 44 24 08 e8 fc bf ff ff 85
c0 75 0a 48 c7 43 08 00 00 00 00 eb b3 <0f> 0b eb f2 e8 f5 c9 b2 e6 0f 1f 44 00 00 90 90 90 90 90 90 90 90
[523232.435936] RSP: 0018:ffffc900077ffbd8 EFLAGS: 00010282
[523232.435937] RAX: 00000000fffffffe RBX: ffffc900077ffc00 RCX: 0000000000000010
[523232.435938] RDX: 0000000000000010 RSI: ffffc900077ffb38 RDI: ffffc900077ffbd8
[523232.435940] RBP: ffff888e1c4f2140 R08: 0000000000000000 R09: 0000000000000000
[523232.435940] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888503811800
[523232.435941] R13: ffffc900077ffca0 R14: ffff888e1c4f2140 R15: ffff88810317e1e0
[523232.435942] FS: 00007f933a769640(0000) GS:ffff88905fa00000(0000) knlGS:0000000000000000
[523232.435943] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[523232.435944] CR2: 00007f930bef7000 CR3: 00000005d0322001 CR4: 00000000003706e0
[523232.435945] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[523232.435946] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[523232.435964] Call Trace:
[523232.435965] <TASK>
[523232.435966] ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436051] ? __warn+0x81/0x130
[523232.436055] ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436138] ? report_bug+0x171/0x1a0
[523232.436142] ? handle_bug+0x3c/0x80
[523232.436144] ? exc_invalid_op+0x17/0x70
[523232.436145] ? asm_exc_invalid_op+0x1a/0x20
[523232.436149] ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436230] ? nvif_vmm_put+0x64/0x80 [nouveau]
[523232.436342] nouveau_vma_del+0x80/0xd0 [nouveau]
[523232.436506] nouveau_vma_new+0x1a0/0x210 [nouveau]
[523232.436671] nouveau_gem_object_open+0x1d0/0x1f0 [nouveau]
[523232.436835] drm_gem_handle_create_tail+0xd1/0x180
[523232.436840] drm_prime_fd_to_handle_ioctl+0x12e/0x200
[523232.436844] ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10
[523232.436847] drm_ioctl_kernel+0xd3/0x180
[523232.436849] drm_ioctl+0x26d/0x4b0
[523232.436851] ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10
[523232.436855] nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
[523232.437032] __x64_sys_ioctl+0x94/0xd0
[523232.437036] do_syscall_64+0x5d/0x90
[523232.437040] ? syscall_exit_to_user_mode+0x2b/0x40
[523232.437044] ? do_syscall_64+0x6c/0x90
[523232.437046] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Reported-by: Faith Ekstrand <[email protected]>
Cc: [email protected]
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When lima_vm_map_bo fails, the resources need to be deallocated, or
there will be memleaks.
Fixes: 6aebc51d7aef ("drm/lima: support heap buffer creation")
Signed-off-by: Zhipeng Lu <[email protected]>
Signed-off-by: Qiang Yu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
|