aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2024-02-14drm/amd/display: Update FIXED_VS Retimer HWSS Test Pattern SequencesMichael Strauss6-56/+65
[WHY] Need to fix some broken logic and sequencing in initial commit [HOW] Fix logic handling override deprogramming when exiting SQ128. Don't exit early from dp_set_hw_lane_settings for DP2/FIXED_VS case. Move LTTPR 128b/132b check out of requires_hwss and check during runtime, as LTTPR caps are not populated on initial call. Add pending_test_pattern to link state to allow HWSS to set FFE overrides on retimer TX and/or skip setting APU TX FFE depending on requested pattern. Use updated clock source for SQ128 override sequence. Skip HW FFE preset programming when performing test pattern overrides. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14drm/amd/display: enable fgcg by defaultCharlene Liu1-1/+2
[why] sw has most of the fgcg enabled which is the same as HW default. but driver disabled some due to enable flag not initialized. comparing HW state, we still need to enable dpp and dio. Reviewed-by: Muhammad Ahmed <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14drm/amd/display: treat plane clip size change as MED update typeWenjing Liu3-1/+9
[why] When clip size is changed recout and viewport size would require an update. When the update is clip size only current driver fails to program the update into hardware. [how] Set a new clip_size_change flag when it is detected and set MED update type and reprogram scaling params in next program pipe. Reviewed-by: Aric Cyr <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14Revert "drm/amd/display: Send DTBCLK disable message on first commit"Gabe Teeger1-1/+0
This reverts commit f341055b10bd8be55c3c995dff5f770b236b8ca9. System hang observed, this commit is thought to be the regression point. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Gabe Teeger <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14drm/amd/display: Preserve original aspect ratio in create streamTom Chung1-0/+2
[Why] The original picture aspect ratio in mode struct may have chance be overwritten with wrong aspect ratio data in create_stream_for_sink(). It will create a different VIC output and cause HDMI compliance test failed. [How] Preserve the original picture aspect ratio data during create the stream. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14drm/amd/display: Fix possible NULL dereference on device remove/driver unloadSrinivasan Shanmugam1-1/+1
As part of a cleanup amdgpu_dm_fini() function, which is typically called when a device is being shut down or a driver is being unloaded The below error message suggests that there is a potential null pointer dereference issue with adev->dm.dc. In the below, line of code where adev->dm.dc is used without a preceding null check: for (i = 0; i < adev->dm.dc->caps.max_links; i++) { To fix this issue, add a null check for adev->dm.dc before this line. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943) Fixes: 006c26a0f1c8 ("drm/amd/display: Fix crash on device remove/driver unload") Cc: Andrey Grodzovsky <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Roman Li <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"Sohaib Nadeem1-1/+1
[why]: This reverts commit 2ff33c759a4247c84ec0b7815f1f223e155ba82a. The commit caused corruption when running some applications in fullscreen Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Alvin Lee <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Sohaib Nadeem <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14drm/amd/display: Add align done checkZhikai Zhai1-1/+4
[WHY] We Double-check link status if training successful, but miss the lane align status. [HOW] Add the lane align status check Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Aurabindo Pillai <[email protected]> Signed-off-by: Zhikai Zhai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-14drm/xe: Remove exec queue bind.fence_*Matthew Brost2-24/+9
struct xe_exec_queue bind.fence_* members are unused. Remove these. Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-14drm/i915/display: update pll values in sync with Bspec for MTLRavi Kumar Vodapalli1-16/+16
DP/eDP and HDMI C20 PHY PLL values were updated for MTL platform Signed-off-by: Ravi Kumar Vodapalli <[email protected]> Reviewed-by: Mika Kahola <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-14drm/i915: Add GuC submission interface version queryTvrtko Ursulin1-0/+33
Add a new query to the GuC submission interface version. Mesa intends to use this information to check for old firmware versions with a known bug where using the render and compute command streamers simultaneously can cause GPU hangs due issues in firmware scheduling. Based on patches from Vivaik and Joonas. Compile tested only. v2: * Added branch version. Signed-off-by: Tvrtko Ursulin <[email protected]> Cc: Kenneth Graunke <[email protected]> Cc: Jose Souza <[email protected]> Cc: Sagar Ghuge <[email protected]> Cc: Paulo Zanoni <[email protected]> Cc: John Harrison <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Vivaik Balasubrawmanian <[email protected]> Cc: Joonas Lahtinen <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Tested-by: José Roberto de Souza <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-14drm: ci: use clk_ignore_unused for apq8016Dmitry Baryshkov1-1/+4
If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is built-in, the clk_disable_unused congests with the runtime PM handling of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to fail without completing any jobs ([1]). Drop the BM_CMDLINE which duplicate the command line from the .baremetal-igt-arm64 clause and enforce the clk_ignore_unused kernelarg instead to make apq8016 runner work. [1] https://gitlab.freedesktop.org/drm/msm/-/jobs/54990475 Fixes: 0119c894ab0d ("drm: Add initial ci/ subdirectory") Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Acked-by: Helen Koike <[email protected]> Signed-off-by: Helen Koike <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-14drm/tests/drm_buddy: add alloc_contiguous testMatthew Auld1-0/+89
Sanity check DRM_BUDDY_CONTIGUOUS_ALLOCATION. v2: Fix checkpatch warnings. Signed-off-by: Matthew Auld <[email protected]> Reviewed-by: Arunpravin Paneer Selvam <[email protected]> Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2024-02-14drm/buddy: Fix alloc_range() error handling codeArunpravin Paneer Selvam1-0/+6
Few users have observed display corruption when they boot the machine to KDE Plasma or playing games. We have root caused the problem that whenever alloc_range() couldn't find the required memory blocks the function was returning SUCCESS in some of the corner cases. The right approach would be if the total allocated size is less than the required size, the function should return -ENOSPC. Cc: <[email protected]> # 6.7+ Fixes: 0a1844bf0b53 ("drm/buddy: Improve contiguous memory allocation") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3097 Tested-by: Mario Limonciello <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Acked-by: Christian König <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2024-02-14drm: drm_crtc: correct some commentsRandy Dunlap1-4/+4
Fix some typos and punctuation. Signed-off-by: Randy Dunlap <[email protected]> Cc: Alex Deucher <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe: Add uAPI to query GuC firmware submission versionJosé Roberto de Souza1-0/+44
Due to a bug in GuC firmware, Mesa can't enable by default the usage of compute engines in DG2 and newer. A new GuC firmware fixed the issue but until now there was no way for Mesa to know if KMD was running with the fixed GuC version or not, so this uAPI is required. It may be expanded in future to query other firmware versions too. This is querying XE_UC_FW_VER_COMPATIBILITY/submission version because that is also supported by VFs, while XE_UC_FW_VER_RELEASE don't. i915 uAPI: https://patchwork.freedesktop.org/series/129627/ Mesa usage: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25233 v2: - fixed drm_xe_query_uc_fw_version documentation - moved branch_ver as the first version number Cc: John Harrison <[email protected]> Cc: Francois Dugast <[email protected]> Cc: Lucas De Marchi <[email protected]> Signed-off-by: José Roberto de Souza <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/rockchip: vop2: add a missing unlock in vop2_crtc_atomic_enable()Harshit Mogalapalli1-1/+3
Unlock before returning on the error path. Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588") Signed-off-by: Harshit Mogalapalli <[email protected]> Reviewed-by: Sascha Hauer <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/panel: st7703: Add Panel Rotation SupportChris Morgan1-0/+13
Add support for panel rotation to ST7703 based devices. Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Guido Günther <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/panel: st7703: Add Powkiddy RGB10MAX3 Panel SupportChris Morgan1-0/+91
The Powkiddy RGB10MAX3 is a handheld device with a 5 inch 720x1280 display panel with a Sitronix ST7703 display controller. The panel is installed rotated 270 degrees. Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Guido Günther <[email protected]> Reviewed-by: Jessica Zhang <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13gpu: host1x: bus: make host1x_bus_type constRicardo B. Marliere2-2/+2
Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the host1x_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <[email protected]> Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Ricardo B. Marliere <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Don't support MCR registers if VFMichal Wajdeczko1-0/+17
VF drivers can't operate on MCR registers. Make sure that driver is not trying to read nor write using any of MCR register. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Don't program PAT if VFMichal Wajdeczko1-0/+5
PAT programming can only be done by the PF driver. Besides VF drivers don't have access to control registers. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Don't enable hwmon if VFMichal Wajdeczko1-0/+5
Registers used by hwmon are not available for VF drivers. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Badal Nilawar <[email protected]> Reviewed-by: Badal Nilawar <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Don't check if LMEM is initialized if VFMichal Wajdeczko1-1/+8
It is PF driver responsibility to verify that LMEM was correctly initialized, also VF drivers don't have access to GU_CNTL register. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Lucas De Marchi <[email protected]> Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Don't initialize stolen memory manager if VFMichal Wajdeczko1-1/+4
VF drivers don't have access to the stolen memory. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Lucas De Marchi <[email protected]> Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Don't program MOCS if VFMichal Wajdeczko1-0/+4
MOCS programming may only be done by the PF driver. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Don't try to capture engine data unavailable to VFMichal Wajdeczko1-0/+5
Don't capture engine ring registers as thoe are not available for the VF driver. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Rodrigo Vivi <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe/vf: Assume fixed GSM size if VFMichal Wajdeczko1-1/+6
VFs can't use size mirrored from PCI config, but it should be safe to assume it covers full 4GiB GGTT. Signed-off-by: Michal Wajdeczko <[email protected]> Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/crtc: fix uninitialized variable use even harderRob Clark1-0/+1
DRM_MODESET_LOCK_ALL_BEGIN() has a hidden trap-door (aka retry loop), which means we can't rely too much on variable initializers. Fixes: 6e455f5dcdd1 ("drm/crtc: fix uninitialized variable use") Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> # sc7180, sdm845 Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2024-02-13drm/prime: Support page array >= 4GBPhilip Yang1-1/+1
Without unsigned long typecast, the size is passed in as zero if page array size >= 4GB, nr_pages >= 0x100000, then sg list converted will have the first and the last chunk lost. Signed-off-by: Philip Yang <[email protected]> Acked-by: Felix Kuehling <[email protected]> Reviewed-by: Christian König <[email protected]> CC: [email protected] Signed-off-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/i915/selftests: Increasing the sleep time for live_rc6_manualAnirban Sk1-2/+2
Sometimes gt_pm live_rc6_manual selftest fails due to no power being measured for the rc6 disabled period. Therefore increasing the rc6 disable period from 250ms to 1000ms to rule out such sporadic failure. v3: - More descriptive and improved commit message (Anshuman) Signed-off-by: Anirban Sk <[email protected]> Reviewed-by: Anshuman Gupta <[email protected]> Signed-off-by: Anshuman Gupta <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13Revert "drm/amd: flush any delayed gfxoff on suspend entry"Mario Limonciello2-2/+8
commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") caused GFXOFF control to be used more heavily and the codepath that was removed from commit 0dee72639533 ("drm/amd: flush any delayed gfxoff on suspend entry") now can be exercised at suspend again. Users report that by using GNOME to suspend the lockscreen trigger will cause SDMA traffic and the system can deadlock. This reverts commit 0dee726395333fea833eaaf838bc80962df886c8. Acked-by: Alex Deucher <[email protected]> Fixes: ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-13drm/amd: Stop evicting resources on APUs in suspendMario Limonciello3-2/+26
commit 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") intentionally moved the eviction of resources to earlier in the suspend process, but this introduced a subtle change that it occurs before adev->in_s0ix or adev->in_s3 are set. This meant that APUs actually started to evict resources at suspend time as well. Explicitly set s0ix or s3 in the prepare() stage, and unset them if the prepare() stage failed. v2: squash in warning fix from Stephen Rothwell Reported-by: Jürg Billeter <[email protected]> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132#note_2271038 Fixes: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") Acked-by: Alex Deucher <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-13drm/i915: Prevent HW access during init from connector get_modes hooksImre Deak4-0/+16
Prevent accessing the HW from the get_modes hooks of connectors deriving the mode list from the display's EDID. drm_edid_connector_add_modes() will return the mode list based on the EDID which was cached during a previous detection/get_modes call. This also fixes the NULL deref problem (10085) which was introduced/revealed by commit bab87ef4db9a ("drm/i915: Disable hotplug detection handlers during driver init/shutdown") After the above change MST connectors will not change state during driver init/shutdown; thus some of these connectors with no I2C/DDC adapter registered for them (since the given MST port has no sink connected) may stay then in the 'unknown' connector status. The get_modes() hook should not try to use the I2C/DDC adapter in this state (which would lead to the above NULL deref) which this patch ensures. v2: - Remove the redundant check from intel_crt_ddc_get_modes(). - Rebase on latest drm-tip. - Add Fixes: line / related commit notes. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10085 Fixes: bab87ef4db9a ("drm/i915: Disable hotplug detection handlers during driver init/shutdown") Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Jouni Högander <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/i915: Prevent HW access during init from SDVO TV get_modes hookImre Deak1-0/+3
Prevent accessing the HW from the SDVO/TV get_modes connector hook. Returning 0 from the hook will make the caller - drm_helper_probe_single_connector_modes() - return a default/EDID override mode list to users. This matches the case where intel_sdvo_get_tv_modes() fails to retrieve the current mode list due to a HW access failure. v2: Clarify the commit message wrt. which modes get_modes() returns. (Jouni) Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Jouni Högander <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/i915: Add bigjoiner force enable option to debugfsStanislav Lisovskiy3-1/+52
For validation purposes, it might be useful to be able to force Bigjoiner mode, even if current dotclock/resolution do not require that. Lets add such to option to debugfs. v2: - Apparently intel_dp_need_bigjoiner can't be used, when debugfs entry is created so lets just check manually the DISPLAY_VER. v3: - Switch to intel_connector from drm_connector(Jani Nikula) - Remove redundant modeset lock(Jani Nikula) - Use kstrtobool_from_user for boolean value(Jani Nikula) v4: - Apply the changes to proper function(Jani Nikula) v5: - Removed unnecessary check from i915_bigjoiner_enable_show (Ville Syrjälä) - Added eDP connector check to intel_connector_debugfs_add (Ville Syrjälä) - Removed debug message in order to prevent dmesg flooding (Ville Syrjälä) v6: - Assume now always that m->private is intel_connector - Fixed other similar conflicts v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä) - Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops manually.(Ville Syrjälä) v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector. (Jani Nikula) Signed-off-by: Stanislav Lisovskiy <[email protected]> Acked-by: Jani Nikula <[email protected]> Signed-off-by: Stanislav Lisovskiy <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-13drm/xe: fix arguments to drm_err_printer()Jani Nikula1-1/+2
The commit below changed drm_err_printer() arguments, but failed to update all places. Reported-by: Stephen Rothwell <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Fixes: 5e0c04c8c40b ("drm/print: make drm_err_printer() device specific by using drm_err()") Cc: Luca Coelho <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Hellström <[email protected]> Reviewed-by: Thomas Hellström <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Jani Nikula <[email protected]>
2024-02-13Merge tag 'amd-drm-next-6.9-2024-02-09' of ↵Dave Airlie289-2530/+6444
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-02-09: amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - S3 fixes - VCN 4.0.5 fixes - DP MST fixes - SR-IOV fixes amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups UAPI: - Bump KFD version so UMDs know that the fixes that enable the management of VA mappings in compute VMs using the GEM_VA ioctl for DMABufs exported from KFD are present - Add INFO query for input power. This matches the existing INFO query for average power. Used in gaming HUDs, etc. Example userspace: https://github.com/Umio-Yasuno/libdrm-amdgpu-sys-rs/tree/input_power From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-12drm/xe/pt: Allow for stricter type- and range checkingThomas Hellström3-31/+29
Distinguish between xe_pt and the xe_pt_dir subclass when allocating and freeing. Also use a fixed-size array for the xe_pt_dir page entries to make life easier for dynamic range- checkers. Finally rename the page-directory child pointer array to "children". While no functional change, this fixes ubsan splats similar to: [ 51.463021] ------------[ cut here ]------------ [ 51.463022] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/xe/xe_pt.c:47:9 [ 51.463023] index 0 is out of range for type 'xe_ptw *[*]' [ 51.463024] CPU: 5 PID: 2778 Comm: xe_vm Tainted: G U 6.8.0-rc1+ #218 [ 51.463026] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 51.463027] Call Trace: [ 51.463028] <TASK> [ 51.463029] dump_stack_lvl+0x47/0x60 [ 51.463030] __ubsan_handle_out_of_bounds+0x95/0xd0 [ 51.463032] xe_pt_destroy+0xa5/0x150 [xe] [ 51.463088] __xe_pt_unbind_vma+0x36c/0x9b0 [xe] [ 51.463144] xe_vm_unbind+0xd8/0x580 [xe] [ 51.463204] ? drm_exec_prepare_obj+0x3f/0x60 [drm_exec] [ 51.463208] __xe_vma_op_execute+0x5da/0x910 [xe] [ 51.463268] ? __drm_gpuvm_sm_unmap+0x1cb/0x220 [drm_gpuvm] [ 51.463272] ? radix_tree_node_alloc.constprop.0+0x89/0xc0 [ 51.463275] ? drm_gpuva_it_remove+0x1f3/0x2a0 [drm_gpuvm] [ 51.463279] ? drm_gpuva_remove+0x2f/0xc0 [drm_gpuvm] [ 51.463283] xe_vm_bind_ioctl+0x1a55/0x20b0 [xe] [ 51.463344] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] [ 51.463414] drm_ioctl_kernel+0xb6/0x120 [ 51.463416] drm_ioctl+0x287/0x4e0 [ 51.463418] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] [ 51.463481] __x64_sys_ioctl+0x94/0xd0 [ 51.463484] do_syscall_64+0x86/0x170 [ 51.463486] ? syscall_exit_to_user_mode+0x7d/0x200 [ 51.463488] ? do_syscall_64+0x96/0x170 [ 51.463490] ? do_syscall_64+0x96/0x170 [ 51.463492] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 51.463494] RIP: 0033:0x7f246bfe817d [ 51.463498] Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00 [ 51.463501] RSP: 002b:00007ffc1bd19ad0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 51.463502] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f246bfe817d [ 51.463504] RDX: 00007ffc1bd19b60 RSI: 0000000040886445 RDI: 0000000000000003 [ 51.463505] RBP: 00007ffc1bd19b20 R08: 0000000000000000 R09: 0000000000000000 [ 51.463506] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc1bd19b60 [ 51.463508] R13: 0000000040886445 R14: 0000000000000003 R15: 0000000000010000 [ 51.463510] </TASK> [ 51.463517] ---[ end trace ]--- v2 - Fix kerneldoc warning (Matthew Brost) Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Rodrigo Vivi <[email protected]> Cc: Matthew Brost <[email protected]> Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-12drm/amdgpu/psp: update define to better align with its meaningAlex Deucher3-3/+3
MEM_TRAINING_ENCROACHED_SIZE is for BIST training data. It's not memory type specific. Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amdgpu: respect the abmlevel module parameter value if it is setHamza Mahfooz3-12/+19
Currently, if the abmlevel module parameter is set, it is possible for user space to override the ABM level at some point after boot. However, that is undesirable because it means that we aren't respecting the user's wishes with regard to the level that they want to use. So, prevent user space from changing the ABM level if the module parameter is set to a non-auto value. Tested-by: Mario Limonciello <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()Nikita Zhandarovich1-9/+7
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX") Signed-off-by: Nikita Zhandarovich <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()Nikita Zhandarovich1-1/+1
Clean up a typo in pr_err() erroneously printing NI MC 'rdev->mc_fw->size' during SMC firmware load. Log 'rdev->smc_fw->size' instead. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 6596afd48af4 ("drm/radeon/kms: add dpm support for btc (v3)") Signed-off-by: Nikita Zhandarovich <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amdgpu: Add jpeg_v5_0_0 ip block supportSonny Jiang1-0/+2
Enable support for jpeg_v5_0_0 ip block. Signed-off-by: Sonny Jiang <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amdgpu/jpeg5: Enable doorbellSonny Jiang1-1/+8
Add doorbell for JPEG5 Signed-off-by: Sonny Jiang <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amdgpu/jpeg5: add power gating supportSonny Jiang1-0/+8
Add PG support for JPEG5 Signed-off-by: Sonny Jiang <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()'Srinivasan Shanmugam1-0/+2
when 'find_dcfclk_for_voltage()' function is looping over VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7). When the loop variable i reaches 7, the function tries to access clock_table->DcfClocks[7]. However, since the size of the DcfClocks array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of the array, leading to a buffer overflow. Reported by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7 Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amd/display: Fix possible use of uninitialized 'max_chunks_fbc_mode' in ↵Srinivasan Shanmugam1-1/+1
'calculate_bandwidth()' 'max_chunks_fbc_mode' is only declared and assigned a value under a specific condition in the following lines: if (data->fbc_en[i] == 1) { max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin; } If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode will not be initialized if it's used outside of this for loop. Ensure that 'max_chunks_fbc_mode' is properly initialized before it's used. Initialize it to a default value right after its declaration to ensure that it gets a value assigned under all possible control flow paths. Thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'. drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Cc: Harry Wentland <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amd/display: Initialize 'wait_time_microsec' variable in ↵Srinivasan Shanmugam1-1/+1
link_dp_training_dpia.c wait_time_microsec = max(wait_time_microsec, (uint32_t) DPIA_CLK_SYNC_DELAY); Above line is trying to assign the maximum value between 'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec. However, 'wait_time_microsec' has not been assigned a value before this line, initialize 'wait_time_microsec' at the point of declaration. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'. Fixes: 630168a97314 ("drm/amd/display: move dp link training logic to link_dp_training") Cc: Wenjing Liu <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-12drm/amdgpu: Add JPEG5 supportSonny Jiang6-9/+611
Add support for JPEG5 Signed-off-by: Sonny Jiang <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>