| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In BMG there are separate registers for card/platform power and
energy.
These are exposed through channel 0 i.e power_1/energy1_xxx.
Signed-off-by: Karthik Poosa <[email protected]>
Reviewed-by: Badal Nilawar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Balasubramani Vivekanandan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Add HWMON support for BMG. Exposing the pkg power, current,
energy info.
Signed-off-by: Karthik Poosa <[email protected]>
Reviewed-by: Badal Nilawar <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Balasubramani Vivekanandan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
During the life of the series that introduced the
DRM_DISPLAY_HDMI_STATE_HELPER option, we reworked the Kconfig option
dependency setup to rely on depends on with commit f6d2dc03fa85 ("drm:
Switch DRM_DISPLAY_HDMI_HELPER to depends on") which got reverted later
on because it was creating too many issues by commit d7c128cb775e
("Revert "drm: Switch DRM_DISPLAY_HDMI_HELPER to depends on"").
However, since the series was out of tree at that time,
DRM_DISPLAY_HDMI_STATE_HELPER wasn't properly updated to take the revert
into account and is now creating build issues.
Let's switch the depends on to a select to fix this.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: 54cb39e2293b ("drm/connector: hdmi: Create an HDMI sub-state")
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Add engine name to the engine reset and cat error log
which should be useful while debugging.
v2: Add logical mask and engine class(Matt)
Use xe_gt_{info|dbg} (Michal)
Cc: Matthew Brost <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
|
|
Use lock that is meant to use for accessing the BO pin list.
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
|
|
After registering the audio component in i915_audio_component_init()
the audio driver may call i915_audio_component_get_power() via the
component ops. This could program AUD_FREQ_CNTRL with an uninitialized
value if the latter function is called before display.audio.freq_cntrl
gets initialized. The get_power() function also does a modeset which in
the above case happens too early before the initialization step and
triggers the
"Reject display access from task"
error message added by the Fixes: commit below.
Fix the above issue by registering the audio component only after the
initialization step.
Fixes: 87c1694533c9 ("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10291
Cc: [email protected] # v5.5+
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fdd0b80172758ce284f19fa8a26d90c61e4371d2)
Signed-off-by: Jani Nikula <[email protected]>
|
|
In some scenarios, the DPT object gets shrunk but
the actual framebuffer did not and thus its still
there on the DPT's vm->bound_list. Then it tries to
rewrite the PTEs via a stale CPU mapping. This causes panic.
Cc: [email protected]
Reported-by: Shawn Lee <[email protected]>
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Vidya Srinivas <[email protected]>
[vsyrjala: Add TODO comment]
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c)
Signed-off-by: Jani Nikula <[email protected]>
|
|
The whole point of the previous fixes has been to change the CCS
hardware configuration to generate only one stream available to
the compute users. We did this by changing the info.engine_mask
that is set during device probe, reset during the detection of
the fused engines, and finally reset again when choosing the CCS
mode.
We can't use the engine_mask variable anymore, as with the
current configuration, it imposes only one CCS no matter what the
hardware configuration is.
Before changing the engine_mask for the third time, save it and
use it for calculating the CCS mode.
After the previous changes, the user reported a performance drop
to around 1/4. We have tested that the compute operations, with
the current patch, have improved by the same factor.
Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload")
Signed-off-by: Andi Shyti <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Gnattu OC <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Matt Roper <[email protected]>
Tested-by: Jian Ye <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Tested-by: Gnattu OC <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a09d2327a9ba8e3f5be238bc1b7ca2809255b464)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Fix sparse warning regarding symbol 'sw43408_backlight_ops' not being
declared.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reviewed-by: Neil Armstrong <[email protected]>
Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver")
Reviewed-by: Marijn Suijten <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Commit 8d4ba9fc1c6c ("drm/i915/selftests: Pick correct caching mode.")
was not complete as for non LLC sharing platforms cpu read can happen
from LLC which probably doesn't have the latest changes made by GPU.
Cc: Andi Shyti <[email protected]>
Cc: Janusz Krzysztofik <[email protected]>
Cc: Jonathan Cavitt <[email protected]>
Fixes: 8d4ba9fc1c6c ("drm/i915/selftests: Pick correct caching mode.")
Reviewed-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
(cherry picked from commit 007ed70831426d4cc108d879d688de6b8e3e6d45)
Signed-off-by: Jani Nikula <[email protected]>
|
|
This panel driver uses DSC PPS functions and as such depends on the
DRM_DISPLAY_DP_HELPER. Select this symbol to make required functions
available to the driver.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: 069a6c0e94f9 ("drm: panel: Add LG sw43408 panel driver")
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df66e ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Michal Wajdeczko <[email protected]>
Signed-off-by: Julia Filipchuk <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 364e039827ef628c650c21c1afe1c54d9c3296d9)
Signed-off-by: Jani Nikula <[email protected]>
|
|
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: <[email protected]> # v5.12+
Signed-off-by: Janusz Krzysztofik <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fbad43eccae5cb14594195c20113369aabaa22b5)
Signed-off-by: Jani Nikula <[email protected]>
|
|
This reverts commit 1f33dc0c1189efb9ae19c6fc22b64dd3e26261fb.
There was a patch supposed to fix an issue of illegal attempts to free a
still active i915 VMA object when parking a GT believed to be idle,
reported by CI on 2-GT Meteor Lake. As a solution, an extra wakeref for
a Primary GT was acquired from i915_gem_do_execbuffer() -- see commit
f56fe3e91787 ("drm/i915: Fix a VMA UAF for multi-gt platform").
However, that fix occurred insufficient -- the issue was still reported by
CI. That wakeref was released on exit from i915_gem_do_execbuffer(), then
potentially before completion of the request and deactivation of its
associated VMAs. Moreover, CI reports indicated that single-GT platforms
also suffered sporadically from the same race.
Since that issue was fixed by another commit f3c71b2ded5c ("drm/i915/vma:
Fix UAF on destroy against retire race"), the changes introduced by that
insufficient fix were dropped as no longer useful. However, that series
resulted in another VMA UAF scenario now being triggered in CI.
<4> [260.290809] ------------[ cut here ]------------
<4> [260.290988] list_del corruption. prev->next should be ffff888118c5d990, but was ffff888118c5a510. (prev=ffff888118c5a510)
<4> [260.291004] WARNING: CPU: 2 PID: 1143 at lib/list_debug.c:62 __list_del_entry_valid_or_report+0xb7/0xe0
..
<4> [260.291055] CPU: 2 PID: 1143 Comm: kms_plane Not tainted 6.9.0-rc2-CI_DRM_14524-ga25d180c6853+ #1
<4> [260.291058] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<4> [260.291060] RIP: 0010:__list_del_entry_valid_or_report+0xb7/0xe0
...
<4> [260.291087] Call Trace:
<4> [260.291089] <TASK>
<4> [260.291124] i915_vma_reopen+0x43/0x80 [i915]
<4> [260.291298] eb_lookup_vmas+0x9cb/0xcc0 [i915]
<4> [260.291579] i915_gem_do_execbuffer+0xc9a/0x26d0 [i915]
<4> [260.291883] i915_gem_execbuffer2_ioctl+0x123/0x2a0 [i915]
...
<4> [260.292301] </TASK>
...
<4> [260.292506] ---[ end trace 0000000000000000 ]---
<4> [260.292782] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6ca3: 0000 [#1] PREEMPT SMP NOPTI
<4> [260.303575] CPU: 2 PID: 1143 Comm: kms_plane Tainted: G W 6.9.0-rc2-CI_DRM_14524-ga25d180c6853+ #1
<4> [260.313851] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<4> [260.326359] RIP: 0010:eb_validate_vmas+0x114/0xd80 [i915]
...
<4> [260.428756] Call Trace:
<4> [260.431192] <TASK>
<4> [639.283393] i915_gem_do_execbuffer+0xd05/0x26d0 [i915]
<4> [639.305245] i915_gem_execbuffer2_ioctl+0x123/0x2a0 [i915]
...
<4> [639.411134] </TASK>
...
<4> [639.449979] ---[ end trace 0000000000000000 ]---
We defer actually closing, unbinding and destroying a VMA until next idle
point, or until the object is freed in the meantime. By postponing the
unbind, we allow for the VMA to be reopened by the client, avoiding the
work required to rebind the VMA.
Starting from commit b0647a5e79b1 ("drm/i915: Avoid live-lock with
i915_vma_parked()"), we assume that as long as a GT is held idle, no VMA
would be reopened while we destroy them. That assumption is no longer
true in multi-GT configurations, where a VMA we reopen may be handled by a
GT different from the one that we already keep active via its engine while
we set up an execbuf request.
Restoring the extra GT0 PM wakeref removed from i915_gem_do_execbuffer()
processing path seems to fix this issue.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10608
Signed-off-by: Janusz Krzysztofik <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Nirmoy Das <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Fixes: 1f33dc0c1189 ("drm/i915: Remove extra multi-gt pm-references")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 749670a58d935303ad1ce529acc73f12de25832e)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Commit ea64761a54a2 ("drm/sun4i: hdmi: Switch to HDMI connector")
introduced a dependency that got renamed in a previous version, but
wasn't properly updated in that driver. Fix the name of the function.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: ea64761a54a2 ("drm/sun4i: hdmi: Switch to HDMI connector")
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Commit ec144244a43f ("drm/gem-shmem: Acquire reservation lock in GEM
pin/unpin callbacks") moved locking DRM object's dma reservation to
drm_gem_shmem_object_pin, and made drm_gem_shmem_pin_locked public, so
we need to make sure the not-imported check warning is also added to
the latter.
Cc: Thomas Zimmermann <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Cc: Boris Brezillon <[email protected]>
Fixes: a78027847226 ("drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()")
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Commit a78027847226 ("drm/gem: Acquire reservation lock in
drm_gem_{pin/unpin}()") moved locking the DRM object's dma reservation to
drm_gem_pin(), but Lima's pin callback kept calling drm_gem_shmem_pin,
which also tries to lock the same dma_resv, leading to a double lock
situation.
As was already done for Panfrost in the previous commit, fix it by
replacing drm_gem_shmem_pin() with its locked variant.
Cc: Thomas Zimmermann <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Steven Price <[email protected]>
Fixes: a78027847226 ("drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()")
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Tested-by: Val Packett <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When Panfrost must pin an object that is being prepared a dma-buf
attachment for on behalf of another driver, the core drm gem object pinning
code already takes a lock on the object's dma reservation.
However, Panfrost GEM object's pinning callback would eventually try taking
the lock on the same dma reservation when delegating pinning of the object
onto the shmem subsystem, which led to a deadlock.
This can be shown by enabling CONFIG_DEBUG_WW_MUTEX_SLOWPATH, which throws
the following recursive locking situation:
weston/3440 is trying to acquire lock:
ffff000000e235a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_gem_shmem_pin+0x34/0xb8 [drm_shmem_helper]
but task is already holding lock:
ffff000000e235a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_gem_pin+0x2c/0x80 [drm]
Fix it by replacing drm_gem_shmem_pin with its locked version, as the lock
had already been taken by drm_gem_pin().
Cc: Thomas Zimmermann <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Steven Price <[email protected]>
Fixes: a78027847226 ("drm/gem: Acquire reservation lock in drm_gem_{pin/unpin}()")
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Replace IS_METEORLAKE usage with a more appropriate macro. While
we are at it also add the stepping restrictions for other platforms.
Fixes: 6a3691ca4799 ("drm/i915/hdcp: Disable HDCP Line Rekeying for HDCP2.2 on HDMI")
Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Dnyaneshwar Bhadane <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some PSR2_CTL bits are applicable for eDP panel replay as well.
Dump this register for eDP Panel Replay as well.
Bspec: 68920
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
intel_psr_status has grown and is about to grow even. Let's split it a bit
and move printing PSR mode to an own function.
v2: s/intel_psr_psr_mode/intel_psr_print_mode/
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
intel_psr_status has grown and is about to grow even. Let's split it a bit
and move printing sink psr support to an own function.
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We need pr_dpcd contents for early transport validity check on eDP Panel
Replay and in debugfs interface to dump out panel early transport
capability. Also remove unnecessarily printing out "Panel replay is not
supported by panel"
v2: commit message modified
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The debug prints about how long the GuC load takes have a loop
counter. However that was neither initialised nor incremented! Plus,
counting loops is no longer meaningful given the wait function returns
early for any change in the status value. So fix it to only count
loops due to actual timeouts.
Signed-off-by: John Harrison <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: b0ac1b42dbdc ("drm/xe/guc: Port over the slow GuC loading support from i915")
Cc: John Harrison <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Oded Gabbay <[email protected]>
Cc: "Thomas Hellström" <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Cc: Fei Yang <[email protected]>
Cc: [email protected]
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Same as commit 7c8690d8fc80 ("drm/panel-edp: Add some panels with
conservative timings"), the 3 panels added in this patch are used by
Mediatek MT8173 Chromebooks and they used to work with the downstream
v4.19 kernel without any specified delay.
These panel IDs were found from in-field reports, but their datahseets
are not available. For BOE 0x0623 and SHP 0x153a, their product names
are retrieved from the EDIDs. The EDID of AUO 0x1999 does not contain
such information, so list as "Unknown" in this patch.
Update these entries with less-conservative timings from other panels of
the same vendor.
Signed-off-by: Pin-yen Lin <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for the following models:
AUO B140HTN02.0
BOE NT116WHM-N21 V4.1
BOE NT116WHM-N21
Signed-off-by: Pin-yen Lin <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
v6.10-rc1 is released, forward from v6.9
Signed-off-by: Maarten Lankhorst <[email protected]>
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by TI OMAP boards. The TI OMAP driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Cc: Laurent Pinchart <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.47.I2513fd6824929a17c1ccd18a797b98a1a1063559@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
The acx565akm seems to do some unique stuff with the "enabled"
state. Specifically:
1. It seems to detect the enabled state based on how the bootloader
left the panel.
2. It uses the enabled state to prevent certain sysfs files from
accessing a disabled panel.
We'll leave the "enabled" state tracking for this. However, we can at
least get rid of the double-check when trying to disable.
Cc: Laurent Pinchart <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.46.I6a51b36831a5c7b2b82bccf8c550cf0d076aa541@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
The compatible strings used by this driver seem to show up across
boards using a variety of DRM drivers. It appears that the relevant
drivers have been converted, but at least one compatible string
doesn't seem to be found in any mainline dts files so we can't be 100%
sure. If it is found that the DRM modeset driver hasn't been fixed
then this patch could be temporarily reverted until it is.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Cc: Guido Günther <[email protected]>
Cc: Ondřej Jirman <[email protected]>
Cc: Chris Morgan <[email protected]>
Cc: Frank Oltmanns <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.43.I08ba0d4e2d534c06ab0ede9c148bb14cc7c1a9d7@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
One thing to note for st7703 is that it has a special "allpixelson"
debugfs file. When this file is written the driver hacks a
disable/unprepare and then a prepare/enable to try to reset the
panel. Potentially that might have been relying on the old booleans we
removed. It'll still "work" because of the checks in the core but it
deserves a comment. This debugfs file didn't appear to be particularly
safe to use even before this patch since it would cause a
disabled/unprepared panel to become prepared/enabled.
Cc: Guido Günther <[email protected]>
Cc: Ondřej Jirman <[email protected]>
Cc: Chris Morgan <[email protected]>
Cc: Frank Oltmanns <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.42.Ifc436b262d72f1a33ddef10adfd7578d4acb60d8@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Rockchip boards. The Rockchip driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.31.Ib97e67a9877070698afbec4f8ede091b2bf89a1f@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.30.I2145be78ce28327f4588c2c21370f22fd79d28b8@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
Unfortunately, it's very difficult to know exactly which DRM modeset
drivers are using panel-simple due to the sheer number of panels it
handles. For now, we'll leave the calls and just add a comment to keep
people from copying this code.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.27.I639183ac987e139092491a94e22d46a5d857580c@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Acked-by: Sui Jingfeng <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.26.I865be97dd393d6ae3c3a3cd1358c95fdbca0fe83@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Qualcomm boards. The Qualcomm driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.25.Iaeacccf98e6cb729b8fc3a782725769cd66812ad@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.24.Ibb4f923363a27167c480a432e52884b117221974@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Qualcomm boards. The Qualcomm driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Cc: Sumit Semwal <[email protected]>
Cc: Benni Steini <[email protected]>
Cc: Marijn Suijten <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Tested-by: Joel Selvaraj <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.19.I67819ba5513d4ef85f254a68b22a3402b4cdf30f@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Sumit Semwal <[email protected]>
Cc: Benni Steini <[email protected]>
Cc: Marijn Suijten <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Tested-by: Joel Selvaraj <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.18.I13a06b9e6f5920659b1e5d12543b3cd9066383b8@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.17.If3edcf846f754b425959980039372a9fd1599ecc@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.16.I4f574b87fe24765ddd4424437159b37a6481aa1a@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Tested-by: Quentin Schulz <[email protected]> # RK3399 Puma with Haikou Video Demo
Tested-by: Quentin Schulz <[email protected]> # PX30 Ringneck with Haikou Video Demo
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.15.Ibeb2e5692e34b136afe4cf55532f0696ab3f5eed@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.14.I264417152e65b4a2e374666010666fa1c2d973fc@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Rockchip boards. The Rockchip driver
appear to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Cc: Brian Norris <[email protected]>
Cc: Chris Zhong <[email protected]>
Cc: Nickey Yang <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.13.I6c7c84b1560dd374f6e7e8dc50f419a870d31d31@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Brian Norris <[email protected]>
Cc: Chris Zhong <[email protected]>
Cc: Nickey Yang <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.12.I711d07c4f4738df199697fd534c452cdfa46a21f@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Rockchip boards. The Rockchip driver
appears to be correctly calling drm_atomic_helper_shutdown() so we can
remove the calls.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Cc: Chris Zhong <[email protected]>
Cc: Lin Huang <[email protected]>
Cc: Brian Norris <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.9.Iaddb8e0cab570e2f8066a4baf1d49239a820b799@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Chris Zhong <[email protected]>
Cc: Lin Huang <[email protected]>
Cc: Brian Norris <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.8.I99c73621fe3fba067a5e7ee6a1f6293c23371e1e@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
Unfortunately, it's very difficult to know exactly which DRM modeset
drivers are using panel-edp due to the sheer number of panels it
handles. For now, we'll leave the calls and just add a comment to keep
people from copying this code.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.7.Icff7f7005d997773d585e36aba9ed41a9865201f@changeid
|
|
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.6.I4d1bf08781593c08127e506422687ab19fd3c824@changeid
|
|
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
A grep through mainline for compatible strings used by this driver
indicates that it is used by Mediatek and Qualcomm boards. Both of
those drivers appear to be correctly calling
drm_atomic_helper_shutdown() so we can remove the calls.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
Cc: Jitao Shi <[email protected]>
Cc: Cong Yang <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.5.I5bd120aa0b7d17a1149ea43cc4852492834058c0@changeid
|