| Age | Commit message (Collapse) | Author | Files | Lines |
|
By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch
buffer, this is not a problem if batch buffer is only used once but
oa reuses the batch buffer for the same metric and at each call
it appends a MI_BATCH_BUFFER_END, printing the warning below and then
overflowing.
[ 381.072016] ------------[ cut here ]------------
[ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed!
platform: LUNARLAKE subplatform: 1
graphics: Xe2_LPG / Xe2_HPG 20.04 step B0
media: Xe2_LPM / Xe2_HPM 20.00 step B0
tile: 0 VRAM 0 B
GT: 0 type 1
So here checking if batch buffer already have MI_BATCH_BUFFER_END if
not append it.
v2:
- simply fix, suggestion from Ashutosh
Cc: Ashutosh Dixit <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Closing a VM removes page table memory thus we shouldn't touch page
tables when a VM is closed. Do not run the GPU page fault handler once
the VM is closed to avoid touching page tables.
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f96dbf7c321d70834d46f3aedb75a671e839b51e)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
If the put() triggers bo destroy then there is at least one potential
sleeping lock. Also annotate bos_lock and ggtt lock.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Tejas Upadhyay <[email protected]>
Cc: "Thomas Hellström" <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Tejas Upadhyay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3b04c2cfd71c54117237c72f2a08ff0ae1f602e2)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Rather extract the mem_type from the current resource. Checking the
first potential placement doesn't really tell us where the bo is
currently allocated, especially if there are multiple potential
placements.
Signed-off-by: Matthew Auld <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Tejas Upadhyay <[email protected]>
Cc: "Thomas Hellström" <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Tejas Upadhyay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit fbd73b7d2ae29ef0f604f376bcc22b886a49329e)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
bo_meminfo() wants to inspect bo state like tt and the ttm resource,
however this state can change at any point leading to stuff like NPD and
UAF, if the bo lock is not held. Grab the bo lock when calling
bo_meminfo(), ensuring we drop any spinlocks first. In the case of
object_idr we now also need to hold a ref.
v2 (MattB)
- Also add xe_bo_assert_held()
Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing")
Signed-off-by: Matthew Auld <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Tejas Upadhyay <[email protected]>
Cc: "Thomas Hellström" <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Tejas Upadhyay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
There is a real deadlock as well as sleeping in atomic() bug in here, if
the bo put happens to be the last ref, since bo destruction wants to
grab the same spinlock and sleeping locks. Fix that by dropping the ref
using xe_bo_put_deferred(), and moving the final commit outside of the
lock. Dropping the lock around the put is tricky since the bo can go
out of scope and delete itself from the list, making it difficult to
navigate to the next list entry.
Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2727
Signed-off-by: Matthew Auld <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Tejas Upadhyay <[email protected]>
Cc: "Thomas Hellström" <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Tejas Upadhyay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Spec says SW is expected to round up to the nearest 128K, if not already
aligned for the CC unit view of CCS. We are seeing the assert sometimes
pop on BMG to tell us that there is a hole between GSM and CCS, as well
as popping other asserts with having a vram size with strange alignment,
which is likely caused by misaligned offset here.
v2 (Shuicheng):
- Do the round_up() on final SW address.
BSpec: 68023
Fixes: b5c2ca0372dc ("drm/xe/xe2hpg: Determine flat ccs offset for vram")
Signed-off-by: Matthew Auld <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Akshata Jahagirdar <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: Shuicheng Lin <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: [email protected] # v6.10+
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Tested-by: Shuicheng Lin <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit 37173392741c425191b959acb3adf70c9a4610c0)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Those macros rely on non-existing MAKE_VER_STRUCT macro, while the
correct one that should be used is named MAKE_GUC_VER_STRUCT.
Fixes: 4eb0aab6e443 ("drm/xe/guc: Bump minimum required GuC version to v70.29.2")
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Julia Filipchuk <[email protected]>
Cc: John Harrison <[email protected]>
Reviewed-by: Michał Winiarski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 02fdf821ed79f59c40d766a85947aa7cc25d4364)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A fairly big update at this time, both in core and driver sides.
The core received rewrites in PCM buffer allocation handling and
locking optimizations, PCM rate updates followed by lots of cleanups.
In ASoC side, the legacy Intel drivers have been deprecated by AVS
drivers which leaded to the significant amount of code reduction.
SoundWire driver updates and other cleanups contributed more code
reduction, too.
USB-audio driver received a large cleanup of its big quirk table, and
the old snd_print*() API usages in many legacy drivers are replaced
with the standard print API.
Here are some highlights:
Core:
- More optimized locking in ALSA control code
- Rewrites of memalloc helpers for better DMA API usage
- Drop of obsoleted vmalloc PCM buffer helper API
- Continued MIDI2 UMP updates
- Support of a new user-space driven timer instance
- Update for more PCM support rates and cleanups
- Xrun counter report in the proc files
ASoC:
- Continued simplification and cleanup works for ASoC
- Extensive cleanups and refactoring of the Soundwire drivers
- Removal of Intel machine support obsoleted by the AVS driver
- Lots of DT schema conversions
- Machine support for many AMD and Intel x86 platforms
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
RTL1320 SoundWire and rev C, and Texas Instruments TAS2563
USB-audio:
- Add support of multiple control interfaces
- A large rewrite of quirk table with macros
- Support for RME Digiface USB
HD-audio:
- Cleanup of quirk code for Samsung Galaxy laptops
- Clean up of detection of Cirrus codecs
- C-Media CM9825 HD-audio codec support
Others:
- Rewrites to standard print API in a lot of legacy drivers"
* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
ASoC: topology: Fix redundant logical jump
ASoC: tas2781: Add Calibration Kcontrols for Chromebook
ASoC: amd: acp: refactor SoundWire machine driver code
ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
ASoC: intel: sof_sdw: rename soundwire parsing helper functions
ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
ALSA: usb-audio: Add logitech Audio profile quirk
ASoc: mediatek: mt8365: Remove unneeded assignment
ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
...
|
|
The module param pcie_p2p should be checked for kfd p2p feature, so add it.
Fixes: 75f0efbc4b3b ("drm/amdgpu: Take IOMMU remapping into account for p2p checks")
Signed-off-by: Bob Zhou <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The feature is not applicable to specific app platform.
v2: update the disablement condition and commit description
v3: move the setting to amdgpu_ras_check_supported
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This resolves the dereference null return value warning
reported by Coverity.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Jesse Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Variable hub_inst is unused.
Fixes: e28604d8337e ("drm/amdkfd: Drop poison hanlding from gfx v10")
Signed-off-by: Jesse Zhang <[email protected]>
Reviewed-by: Tim Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We were removing the kernfs entry for queue info before checking if the
queue could be destroyed. If it failed to get destroyed (e.g. during
some GPU resets), then we would try to delete it later during pqm
teardown, but the file was already removed. This led to a kernel WARN
trying to remove size, gpuid and type. Move the remove to after the
destroy check.
Signed-off-by: Kent Russell <[email protected]>
Reviewed-by: Jonathan Kim <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix usefafter-free when provisioning VF (Matthew Auld)
- Suppress rpm warning on false positive (Rodrigo)
- Fix memleak on ioctl error path (Dafna)
- Fix use-after-free while inserting ggtt (Michal Wajdeczko)
- Add Wa_15016589081 workaround (Tejas)
- Fix error path on suspend (Maarten)
Signed-off-by: Dave Airlie <[email protected]>
From: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/az6xs2z6zj3brq2h5wgaaoxwnqktrwbvxoyckrz7gbywsso734@a6v7gytqbcd6
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.12-2024-09-13:
amdgpu:
- GPUVM sync fixes
- kdoc fixes
- Misc spelling mistakes
- Add some raven GFXOFF quirks
- Use clamp helper
- DC fixes
- JPEG fixes
- Process isolation fix
- Queue reset fix
- W=1 cleanup
- SMU14 fixes
- JPEG fixes
amdkfd:
- Fetch cacheline info from IP discovery
- Queue reset fix
- RAS fix
- Document SVM events
- CRIU fixes
- Race fix in dma-buf handling
drm:
- dma-buf fd race fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
|
Panel Self Refresh on eDP requires the AUX IO power to be enabled
whenever the output (main link) is enabled. This is required by the
AUX_PHY_WAKE/ML_PHY_LOCK signaling initiated by the HW automatically to
re-enable the main link after it got disabled in power saving states
(see eDP v1.4b, sections 5.1, 6.1.3.3.1.1).
The Panel Replay mode on non-eDP outputs on the other hand is only
supported by keeping the main link active, thus not requiring the above
AUX_PHY_WAKE/ML_PHY_LOCK signaling (eDP v1.4b, section 6.1.3.3.1.2).
Thus enabling the AUX IO power for this case is not required either.
Based on the above enable the AUX IO power only for eDP/PSR outputs.
Bspec: 49274, 53370
v2:
- Add a TODO comment to adjust the requirement for AUX IO based on
whether the ALPM/main-link off mode gets enabled. (Rodrigo)
Cc: Animesh Manna <[email protected]>
Fixes: b8cf5b5d266e ("drm/i915/panelreplay: Initializaton and compute config for panel replay")
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f7c2ed9d4ce80a2570c492825de239dc8b500f2e)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
UHBR20 is not supported by battlemage and the maximum link rate
supported is UHBR13.5
v2: Replace IS_DGFX with IS_BATTLEMAGE (Jani)
HSD: 16023263677
Signed-off-by: Arun R Murthy <[email protected]>
Reviewed-by: Mika Kahola <[email protected]>
Fixes: 98b1c87a5e51 ("drm/i915/xe2hpd: Set maximum DP rate to UHBR13.5")
Signed-off-by: Suraj Kandpal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9c2338ac4543e0fab3a1e0f9f025591e0f0d9f8f)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
We do not have ALPM on DP Panel Replay. Due to this SRD_STATUS[SRD State]
doesn't change from SRDENT_ON after Panel Replay is enabled until it gets
disabled.
On eDP Panel Replay DEEP_SLEEP is not reached.
_psr2_ready_for_pipe_update_locked is waiting DEEP_SLEEP bit getting reset.
Take these into account in Panel Replay code by not waiting PSR getting
idle after enabling VBI.
Fixes: 29fb595d4875 ("drm/i915/psr: Panel replay uses SRD_STATUS to track it's status")
Cc: Animesh Manna <[email protected]>
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a2d98feb4b0013ef4f9db0d8f642a8ac1f5ecbb9)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Pull ARM updates from Russell King:
- clean up TTBCR magic numbers and use u32 for this register
- fix clang issue in VFP code leading to kernel oops, caused by
compiler instruction scheduling.
- switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the
arch_cpu_is_hotpluggable() hook.
- pass struct device to arm_iommu_create_mapping() and move over to use
iommu_paging_domain_alloc() rather than iommu_domain_alloc()
- make amba_bustype constant
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9418/1: dma-mapping: Use iommu_paging_domain_alloc()
ARM: 9417/1: dma-mapping: Pass device to arm_iommu_create_mapping()
ARM: 9416/1: amba: make amba_bustype constant
ARM: 9412/1: Convert to arch_cpu_is_hotpluggable()
ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu()
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
ARM: 9409/1: mmu: Do not use magic number for TTBCR settings
|
|
Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with
a real VLA to fix a "memcpy: detected field-spanning write error" warning:
[ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4)
[ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo]
[ 13.320038] Call Trace:
[ 13.320173] hgsmi_update_pointer_shape [vboxvideo]
[ 13.320184] vbox_cursor_atomic_update [vboxvideo]
Note as mentioned in the added comment it seems the original length
calculation for the allocated and send hgsmi buffer is 4 bytes too large.
Changing this is not the goal of this patch, so this behavior is kept.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Add missing I915_FORMAT_MOD_4_TILED_BMG_CCS modifier for BMG
- Printk formatting fix
Signed-off-by: Dave Airlie <[email protected]>
From: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Remove a double include (Lucas)
- Fix null checks and UAF (Brost)
- Fix access_ok check in user_fence_create (Nirmoy)
- Fix compat IS_DISPLAY_STEP() range (Jani)
- OA fix (Ashutosh)
- Fixes in show_meminfo (Auld)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
An off-by-one fix for the CMA DMA-buf heap, An init fix for nouveau, a
config dependency fix for stm, a syncobj leak fix, and two iommu fixes
for tegra and rockchip.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912-phenomenal-upbeat-grouse-a26781@houat
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Prevent a possible int overflow in wq offsets [guc] (Nikita Zhandarovich)
Signed-off-by: Dave Airlie <[email protected]>
From: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZuKTN2XngNhBB3z3@linux
|
|
This error path was missed when converting away from
xe_display_pm_resume with second argument.
Fixes: 66a0f6b9f5fc ("drm/xe/display: handle HPD polling in display runtime suspend/resume")
Cc: Arun R Murthy <[email protected]>
Cc: Vinod Govindapillai <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Reviewed-by: Vinod Govindapillai <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 474f64cb988a410db8a0b779d6afdaa2a7fc5759)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Wa_15016589081 applies to xe2_hpg renderCS
V2(Gustavo)
- rename bit macro
Signed-off-by: Tejas Upadhyay <[email protected]>
Reviewed-by: Gustavo Sousa <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
(cherry picked from commit 9db969b36b2fbca13ad4088aff725ebd5e8142f5)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
When we fail to map a BO in the GGTT, we release our GGTT node
placeholder, but leave stale bo->ggtt_node pointer to it, which
triggers an assert immediately followed by a crash, due to UAF:
[ ] xe 0000:00:02.0: [drm] Assertion `bo->ggtt_node->base.size == bo->size` failed!
[ ] WARNING: CPU: 4 PID: 126 at drivers/gpu/drm/xe/xe_ggtt.c:689 xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] RIP: 0010:xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] ? __warn+0x88/0x190
[ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] ? report_bug+0x1c3/0x1d0
[ ] ? handle_bug+0x42/0x70
[ ] ? exc_invalid_op+0x14/0x70
[ ] ? asm_exc_invalid_op+0x16/0x20
[ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe]
[ ] xe_ttm_bo_destroy+0x11f/0x260 [xe]
[ ] ? ttm_bo_release+0x31c/0x350 [ttm]
[ ] ? __mutex_unlock_slowpath+0x35/0x270
[ ] __xe_bo_create_locked+0x4a0/0x550 [xe]
[ ] ? mark_held_locks+0x49/0x80
[ ] xe_bo_create_pin_map_at+0x37/0x200 [xe]
[ ] xe_bo_create_pin_map+0x11/0x20 [xe]
While around, for similar reason, also don't keep an error pointer
if we fail to allocate ggtt_node placeholder.
Fixes: 34e804220f69 ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f2710d95724ebbfa35d6d4b82017eeab70994509)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Fix memleak caused by missing xe_vm_put
Fixes: 852856e3b6f6 ("drm/xe: Use reserved copy engine for user binds on faulting devices")
Signed-off-by: Dafna Hirschfeld <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 249df8cbecf0ab4877eab66cae857748631831a9)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
The 'runtime_status' field is an implementation detail of the
power management code, so a device driver should not normally
touch this:
drivers/gpu/drm/xe/xe_pm.c: In function 'xe_pm_suspending_or_resuming':
drivers/gpu/drm/xe/xe_pm.c:606:26: error: 'struct dev_pm_info' has no member named 'runtime_status'
606 | return dev->power.runtime_status == RPM_SUSPENDING ||
| ^
drivers/gpu/drm/xe/xe_pm.c:607:27: error: 'struct dev_pm_info' has no member named 'runtime_status'
607 | dev->power.runtime_status == RPM_RESUMING;
| ^
drivers/gpu/drm/xe/xe_pm.c:608:1: error: control reaches end of non-void function [-Werror=return-type]
Add an #ifdef check to avoid the build regression.
Fixes: ad92f5231261 ("drm/xe: Suppress missing outer rpm protection warning")
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 1c129ed07de47684ff2471e32b52fa823533aa06)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Do not raise a WARN if we are likely within suspending or resuming
path. This is likely this false positive:
rpm_status: 0000:03:00.0 status=RPM_SUSPENDING
console: xe_bo_evict_all (called from suspend)
xe_sched_job_create: dev=0000:03:00.0, ...
xe_sched_job_exec: dev=0000:03:00.0, ...
xe_pm_runtime_put: dev=0000:03:00.0, ...
xe_sched_job_run: dev=0000:03:00.0, ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
console: xe 0000:03:00.0: [drm] Missing outer runtime
PM protection
console: xe_guc_ct_send+0x15/0x50 [xe]
console: guc_exec_queue_run_job+0x1509/0x3950 [xe]
[snip]
console: drm_sched_run_job_work+0x649/0xc20
At this point, BOs are getting evicted from VRAM with rpm
usage-counter = 2, but rpm status = SUSPENDING.
The xe->pm_callback_task won't be equal 'current' because this call is
coming from a work queue.
So, pm_runtime_get_if_active() will be called and return 0 because rpm
status != ACTIVE (but equal SUSPENDING or RESUMING).
v2: Still get the reference even on non suspending/resuming
path (Jonathan, Brost).
Cc: Matthew Brost <[email protected]>
Cc: Matthew Auld <[email protected]>
Reviewed-by: Jonathan Cavitt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit cb85e39dc5d1717fab82810984cce0e54712a3c2)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
The node ptr can point to an already freed ptr, if we hit the path with
an already allocated node. We later dereference that pointer with:
xe_gt_assert(gt, !xe_ggtt_node_allocated(node));
which is a potential UAF. Fix this by not stashing the ptr for node.
Also since it is likely a bad idea to leave config->ggtt_region pointing
to a stale ptr, also set that to NULL by calling
pf_release_vf_config_ggtt() instead of pf_release_ggtt().
Fixes: 34e804220f69 ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 89076b5a8b4e0a01040585e156a0b014cd472fd3)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
bo_meminfo() wants to inspect bo state like tt and the ttm resource,
however this state can change at any point leading to stuff like NPD and
UAF, if the bo lock is not held. Grab the bo lock when calling
bo_meminfo(), ensuring we drop any spinlocks first. In the case of
object_idr we now also need to hold a ref.
v2 (MattB)
- Also add xe_bo_assert_held()
Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing")
Signed-off-by: Matthew Auld <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Tejas Upadhyay <[email protected]>
Cc: "Thomas Hellström" <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Tejas Upadhyay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
There is a real deadlock as well as sleeping in atomic() bug in here, if
the bo put happens to be the last ref, since bo destruction wants to
grab the same spinlock and sleeping locks. Fix that by dropping the ref
using xe_bo_put_deferred(), and moving the final commit outside of the
lock. Dropping the lock around the put is tricky since the bo can go
out of scope and delete itself from the list, making it difficult to
navigate to the next list entry.
Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2727
Signed-off-by: Matthew Auld <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Tejas Upadhyay <[email protected]>
Cc: "Thomas Hellström" <[email protected]>
Cc: <[email protected]> # v6.8+
Reviewed-by: Matthew Brost <[email protected]>
Reviewed-by: Tejas Upadhyay <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Enable Xe2+ PES disaggregation (for OAG) to retrieve disaggregated metrics
when disaggregated data is needed. Userspace can select whether to receive
aggregated or disaggregated metrics via the particular OA configuration it
uses (programmed via DRM_XE_OBSERVATION_OP_ADD_CONFIG).
Bspec: 61101
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Cc: [email protected]
(cherry picked from commit fb2551a0e93897aec7fb3d4f473ebc06b146d160)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
It's supposed to be an open range at the end like in i915. Fingers
crossed that nobody relies on this definition.
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Reviewed-by: Lucas De Marchi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/fe8743770694e429f6902491cdb306c97bdf701a.1724180287.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <[email protected]>
(cherry picked from commit 453afb1a439994deeacb8d9ecbb48c1f2348ea0a)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Check size of the data not size of the pointer.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: ddeb7989a98f ("drm/xe: Validate user fence during creation")
Cc: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Reviewed-by: Tejas Upadhyay <[email protected]>
Reviewed-by: Apoorva Singh <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
(cherry picked from commit e102b5ed6e283a144793cab8fcd95f61d0ddbadb)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Store xe_device ahead of processing message as message can be free'd in
some cases.
v2:
- Including missing local changes
v3:
- Resend for CI
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Fixes: 55ea73aacfb9 ("drm/xe: Build PM into GuC CT layer")
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 1a394b4f504f33eac8c38b6f42ba025105c7e869)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
'fence' argument in send_tlb_invalidation cannot be NULL, remove
non-NULL check from send_tlb_invalidation.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Fixes: 58bfe6674467 ("drm/xe: Drop xe_gt_tlb_invalidation_wait")
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Nirmoy Das <[email protected]>
(cherry picked from commit 6482253e6e1ad1c3a76645a3899d3cfdb5b918cb)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The header generated/xe_wa_oob.h is included twice. Remove one.
Fixes: 27cb2b7fec2a ("drm/xe/bmg: implement Wa_16023588340")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Reviewed-by: Michal Wajdeczko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit 3d122660dc70029d9cccb4e8670125f0affa959e)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Atm it's assumed that all Synaptics MST branch devices support DSC,
which is not exposed via a DP-to-DP peer device, rather a control flag
in the branch device's UFP DPCD applying to all the streams going
through it. This isn't true for all adapters with this branch device
though (for instance the Cakitte USBC->2xHDMI adapter reported in the
Closes link below doesn't support DSC).
Fix the above by advertising the DSC decompression support only if the
capability flag for this in the UFP DPCD is actually set.
Cc: Lyude Paul <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12047
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/[email protected]
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Leo Li <[email protected]>
Tested-by: Mikhail Gavrilov <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
(cherry picked from commit 0c8c5bdd7eaf291b6f727e98506fb68acee3a4cc)
|
|
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/[email protected]
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Leo Li <[email protected]>
Tested-by: Mikhail Gavrilov <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
s/0x04%x/0x%04x/ to use 0 prefixed width 4 instead of printing 04
verbatim.
Fixes: 51f5748179d4 ("drm/i915/bios: create fake child devices on missing VBT")
Cc: [email protected] # v5.13+
Reviewed-by: Vandita Kulkarni <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Jani Nikula <[email protected]>
(cherry picked from commit 54df34c5a2439b481f066476e67bfa21a0a640e5)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Let I915_FORMAT_MOD_4_TILED_BMG_CCS show up as supported modifier
Fixes: 97c6efb36497 ("drm/i915/display: Plane capability for 64k phys alignment")
Signed-off-by: Juha-Pekka Heikkila <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Maarten Lankhorst,,, <[email protected]>
(cherry picked from commit c4d37c54c3739530f8585ccf064fb712913f8375)
Signed-off-by: Joonas Lahtinen <[email protected]>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
tegra:
- Fix uninitialized variable in EDID code
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|