| Age | Commit message (Collapse) | Author | Files | Lines |
|
Don't need to query error count and error address on harvest umc nodes.
v2: Fix code bug, use active_mask instead of harvsest_config
and remove unnecessary argument in LOOP macro.
v3: Leave adev->gmc.num_umc unchanged.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add static prefix for vangogh_set_apu_thermal_limit function
Signed-off-by: Kun Liu <[email protected]>
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform
IDLE-SAVE after VF fini.
Otherwise it could cause GFX hang if another Win guest is rendering.
Signed-off-by: leiyaoyao <[email protected]>
Acked-by: ZhenGuo Yin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This is useful to understand the bpc defaults and
support of a driver.
Signed-off-by: Harry Wentland <[email protected]>
Cc: Pekka Paalanen <[email protected]>
Cc: Sebastian Wick <[email protected]>
Cc: [email protected]
Cc: Uma Shankar <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Joshua Ashton <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-By: Joshua Ashton <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Alex Deucher <[email protected]>
|
|
The EDID of an HDR display defines EOTFs that are supported
by the display and can be set in the HDR metadata infoframe.
Userspace is expected to read the EDID and set an appropriate
HDR_OUTPUT_METADATA.
In drm_parse_hdr_metadata_block the kernel reads the supported
EOTFs from the EDID and stores them in the
drm_connector->hdr_sink_metadata. While doing so it also
filters the EOTFs to the EOTFs the kernel knows about.
When an HDR_OUTPUT_METADATA is set it then checks to
make sure the EOTF is a supported EOTF. In cases where
the kernel doesn't know about a new EOTF this check will
fail, even if the EDID advertises support.
Since it is expected that userspace reads the EDID to understand
what the display supports it doesn't make sense for DRM to block
an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't
understand.
This comes with the added benefit of future-proofing metadata
support. If the spec defines a new EOTF there is no need to
update DRM and an compositor can immediately make use of it.
Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609
v2: Distinguish EOTFs defind in kernel and ones defined
in EDID in the commit description (Pekka)
v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved
to drm_hdmi_helper.c
Signed-off-by: Harry Wentland <[email protected]>
Cc: Pekka Paalanen <[email protected]>
Cc: Sebastian Wick <[email protected]>
Cc: [email protected]
Cc: Uma Shankar <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Joshua Ashton <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Pekka Paalanen <[email protected]>
Reviewed-By: Joshua Ashton <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for nouveau preventing the system shutdown and one for a build
warning, and NULL pointer dereference fix for cirrus.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223083839.5gtmu6i42bnj7pfh@houat
|
|
Split out the RPS parts so they can be conditionally compiled out later.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
VirtIO-GPU got a new config option for disabling KMS. There were two
problems left unnoticed during review when the new option was added:
1. The IS_ENABLED(CONFIG_DRM_VIRTIO_GPU_KMS) check in the code was
inverted, hence KMS was disabled when it should be enabled and vice versa.
2. The disabled KMS crashed kernel with a NULL dereference in
drm_kms_helper_hotplug_event(), which shall not be invoked with a
disabled KMS.
Fix the inverted config option check in the code and skip handling the
VIRTIO_GPU_EVENT_DISPLAY sent by host when KMS is disabled in guest to fix
the crash.
Acked-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Fixes: 72122c69d717 ("drm/virtio: Add option to disable KMS support")
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Follow the contemporary convention for struct drm_i915_private * naming.
Cc: Imre Deak <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
sizeof(struct intel_dmc) > 1024 bytes, allocated on all platforms as
part of struct drm_i915_private, whether they have DMC or not.
Allocate struct intel_dmc dynamically, and hide all the dmc details
behind an opaque pointer in intel_dmc.c.
Care must be taken to take into account all cases: DMC not supported on
the platform, DMC supported but not initialized, and DMC initialized but
not loaded. For the second case, we need to move the wakeref out of
struct intel_dmc.
v2:
- Rebase to kzalloc dmc after runtime pm get (Imre)
Cc: Imre Deak <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Start preparing for dynamically allocated struct intel_dmc by adding
i915_to_dmc() and dmc->i915, and using them. Take the future NULL dmc
pointer into account already now, and add separate logging for
initialization in the DMC debugfs.
v3:
- Obtain runtime pm reference first (Imre)
v2:
- Don't reduce debugfs output (Imre)
Cc: Imre Deak <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This will help in follow-up changes.
Cc: Imre Deak <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There's only one reference to the struct intel_dmc members dc_state,
target_dc_state, and allowed_dc_mask within intel_dmc.c, begging the
question why they are under struct intel_dmc to begin with.
Moreover, the only references to i915->display.dmc outside of
intel_dmc.c are to these members.
They don't belong. Move them from struct intel_dmc to struct
i915_power_domains, which seems like a more suitable place.
Cc: Imre Deak <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As intel_pm.[ch] used to contain much more, intel_pm.h was included in a
lot of places. Many of them are now unnecessary. Remove.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ab9a7147b0cd63d95b9f27ed40615b9c9be18f84.1677678803.git.jani.nikula@intel.com
|
|
All intel_suspend_hw() does is clear PCH_LP_PARTITION_LEVEL_DISABLE bit
in SOUTH_DSPCLK_GATE_D for LPT LP. intel_suspend_hw() gets called from
i915_drm_suspend().
However, i915_drm_suspend_late() calls
intel_display_power_suspend_late(), which in turn calls hsw_enable_pc8()
on HSW and BDW. The first thing that does is clear
PCH_LP_PARTITION_LEVEL_DISABLE bit in SOUTH_DSPCLK_GATE_D.
Remove the duplicated clearing of the bit, effectively delaying it from
i915_drm_suspend() to i915_drm_suspend_late(), and remove the
unnecessary intel_suspend_hw() function altogether.
Cc: Imre Deak <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/f732a7922c2450b41169c9b79a80fba97ab00592.1677678803.git.jani.nikula@intel.com
|
|
All the init in intel_pm_setup() is related to runtime pm. Move them to
intel_runtime_pm_init_early(), and remove intel_pm_setup().
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/b01f9bf0afa9abaece5d0f76aecde69e2679f662.1677678803.git.jani.nikula@intel.com
|
|
Remove the leftover from moving and renaming the file from driver top
level.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/f11cbbdb5a5c8961fcae0b3f6c87860ee00f8c26.1677678803.git.jani.nikula@intel.com
|
|
Relatively few places need the DSC and DSS register definitions. Move
them to intel_vdsc_regs.h.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Because compatible of mt8195 is changing from "mediatek,mt8195-mmsys"
to "mediatek,mt8195-vdosys0".
We have to revert the multiple compatible finding function and
add driver data of mt8195 vdosys0 to mediatek-drm and the sub driver.
Signed-off-by: Jason-JH.Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
On TGL+ the DSS control registers are at different offsets, and there's
one per pipe. Fix the offsets to fix dual link DSI for TGL+.
There would be helpers for this in the DSC code, but just do the quick
fix now for DSI. Long term, we should probably move all the DSS handling
into intel_vdsc.c, so exporting the helpers seems counter-productive.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8232
Cc: Ville Syrjala <[email protected]>
Cc: [email protected]
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Relax a bit the supported modes list by including also 480x1920 and
400x1280. This was actually tested on real hardware and it works
correctly.
Signed-off-by: Carlo Caione <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Playing media with a resolution smaller than the crtc size requires the
video overlay to be scaled for output and GXM boards display a 1px pink
line on the bottom of the scaled overlay. Comparing with the downstream
vendor driver revealed VPP_DUMMY_DATA not being set [0].
Setting VPP_DUMMY_DATA prevents the 1px pink line from being seen.
[0] https://github.com/endlessm/linux-s905x/blob/master/drivers/amlogic/amports/video.c#L7869
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Suggested-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This is already documented under "standard connector properties".
Signed-off-by: Simon Ser <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Pekka Paalanen <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Cc: Mateusz Kwiatkowski <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add docs for "{left,right,top,bottom} margin" properties.
v2:
- Mention the purpose: mitigate underscan on TVs
- Move out of analog TV section into standard props (Pekka)
- Mention HDMI AVI InfoFrames (Pekka, Ville)
Signed-off-by: Simon Ser <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Cc: Mateusz Kwiatkowski <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Acked-by: Pekka Paalanen <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add a build option to disable modesetting support. This is useful in
cases where the guest only needs to use the GPU in a headless mode, or
(such as in the CrOS usage) window surfaces are proxied to a host
compositor.
As the modesetting ioctls are a big surface area for potential security
bugs to be found (it's happened in the past, we should assume it will
again in the future), it makes sense to have a build option to disable
those ioctls in cases where they serve no legitimate purpose.
v2: Use more if (IS_ENABLED(...))
v3: Also permit the host to advertise no scanouts
v4: Spiff out commit msg
v5: Make num_scanouts==0 and DRM_VIRTIO_GPU_KMS=n behave the same
v6: Drop conditionally building virtgpu_display.c and early-out of
it's init/fini fxns instead
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Clear DSPP reservations from the global state during
rm release
Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Kalyan Thota <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522443/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
At sc7280, pingpong block is used to management the dither effects
to reduce distortion at panel. Currently pingpong-0 base offset is
wrongly set at 0x59000. This mistake will not cause system to crash.
However it will make dither not work. This patch correct sc7280 ping
pong-0 block base offset.
Changes in v2:
-- add more details info n regrading of pingpong block at commit text
Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/524332/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
The rewritten dpu_hw_ctl_setup_blendstage() can lightly smash the stack
when setting the SSPP_NONE pipe. However it was unnoticed until the
kernel was tested under AOSP (with some kind of stack protection/check).
This fixes the following backtrace:
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f20003e8 [#1] PREEMPT SMP
Hardware name: Thundercomm Dragonboard 845c (DT)
pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dpu_hw_ctl_setup_blendstage+0x26c/0x278 [msm]
lr : _dpu_crtc_blend_setup+0x4b4/0x5a0 [msm]
sp : ffffffc00bdcb720
x29: ffffffc00bdcb720 x28: ffffff8085debac0 x27: 0000000000000002
x26: ffffffd74af18320 x25: ffffff8083af75a0 x24: ffffffc00bdcb878
x23: 0000000000000001 x22: 0000000000000000 x21: ffffff8085a70000
x20: ffffff8083012dc0 x19: 0000000000000001 x18: 0000000000000000
x17: 000000040044ffff x16: 045000f4b5593519 x15: 0000000000000000
x14: 000000000000000b x13: 0000000000000001 x12: 0000000000000000
x11: 0000000000000001 x10: ffffffc00bdcb764 x9 : ffffffd74af06a08
x8 : 0000000000000001 x7 : 0000000000000001 x6 : 0000000000000000
x5 : ffffffc00bdcb878 x4 : 0000000000000002 x3 : ffffffffffffffff
x2 : ffffffc00bdcb878 x1 : 0000000000000000 x0 : 0000000000000002
Call trace:
dpu_hw_ctl_setup_blendstage+0x26c/0x278 [msm]
_dpu_crtc_blend_setup+0x4b4/0x5a0 [msm]
dpu_crtc_atomic_begin+0xd8/0x22c [msm]
drm_atomic_helper_commit_planes+0x80/0x208 [drm_kms_helper]
msm_atomic_commit_tail+0x134/0x6f0 [msm]
commit_tail+0xa4/0x1a4 [drm_kms_helper]
drm_atomic_helper_commit+0x170/0x184 [drm_kms_helper]
drm_atomic_commit+0xac/0xe8
drm_mode_atomic_ioctl+0xbf0/0xdac
drm_ioctl_kernel+0xc4/0x178
drm_ioctl+0x2c8/0x608
__arm64_sys_ioctl+0xa8/0xec
invoke_syscall+0x44/0x104
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x38/0x98
el0_svc+0x2c/0xb4
el0t_64_sync_handler+0xb8/0xbc
el0t_64_sync+0x1a0/0x1a4
Code: 52800016 52800017 52800018 17ffffc7 (d4207d00)
Fixes: 4488f71f6373 ("drm/msm/dpu: simplify blend configuration")
Reported-by: Amit Pundir <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Tested-by: Amit Pundir <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/523778/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
DPU driver has been using the DPU_CLK_CTRL_CURSOR prefix for the DMA
SSPP blocks used for the cursor planes. This has lead to the confusion
at least for the MSM8998 platform. In preparation to supporting the
cursor SSPP blocks, use proper enum values to index DMA SSPP clock
controls.
Reviewed-by: Neil Armstrong <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on SM8550 on top of next-20230116
Reviewed-by: Marijn Suijten <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522228/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
DMA2 and DMA3 planes on msm8998 should use corresponding DMA2 and DMA3
clocks rather than CURSOR0/1 clocks (which are used for the CURSOR
planes). Correct corresponding SSPP declarations.
Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Cc: AngeloGioacchino Del Regno <[email protected]>
Cc: Jami Kettunen <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522230/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
The msm8998 doesn't seem to support DIM_LAYER, so drop it from
the supported features mask.
Fixes: 2d8a4edb672d ("drm/msm/dpu: use feature bit for LM combined alpha check")
Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522231/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm6115. Fix the used feature masks.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Fixes: 3581b7062cec ("drm/msm/disp/dpu1: add support for display on SM6115")
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522219/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm8250 and sm8350. Fix the DPU caps structure and used feature masks.
Fixes: d21fc5dfc3df ("drm/msm/dpu1: add support for qseed3lite used on sm8250")
Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522229/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm8450. Fix the used feature masks.
Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522215/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
QSEED4 is a newer variant of QSEED3LITE, which should be used on
sc8280xp. Fix the DPU caps structure and used feature masks.
Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522217/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm8550. Fix the DPU caps structure and used feature masks.
Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522213/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
According to vendor DTS files both sm6115 and qcm2290 should have
max_mixer_width set to 2048 (DEFAULT_DPU_LINE_WIDTH). Correct it.
Fixes: 3581b7062cec ("drm/msm/disp/dpu1: add support for display on SM6115")
Fixes: 5334087ee743 ("drm/msm: add support for QCM2290 MDSS")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522212/
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: fix minor typo in commit message]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
Change sc7180's ctl block len to 0x1dc.
Fixes: 7bdc0c4b8126 ("msm:disp:dpu1: add support for display for SC7180 target")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522210/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
Fix typo in the name of the sblk structure for the sm8550's dma_sblk_5.
Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/522225/
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: fix minor typo in commit message]
Signed-off-by: Abhinav Kumar <[email protected]>
|
|
Use ktime_get() after accessing the mmio or any driver resource,
while using wall time for various calculation that depends on
the inserted delay in order to account any mmio and resource
access latency.
Cc: Chris Wilson <[email protected]>
Signed-off-by: Anshuman Gupta <[email protected]>
Reviewed-by: Badal Nilawar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
While reading the engine timestamps there can be uncontrollable
concurrent mmio access via other i915 child drivers and by GuC,
which is not truly atomic context as expected by this selftest,
which may cause mmio latency to read the engine timestamps,
Account such latency to calculate time to read engine timestamp
such that selftest can validate the timestamp and ktime pair.
Cc: Chris Wilson <[email protected]>
Signed-off-by: Anshuman Gupta <[email protected]>
Reviewed-by: Badal Nilawar <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173fac ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173fac ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <[email protected]>
Cc: [email protected] # v5.5
Cc: Andi Shyti <[email protected]>
Signed-off-by: Janusz Krzysztofik <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Driver-FLR flow may inadvertently exit early before the full
completion of the re-init of the internal HW state if we only poll
GU_DEBUG Bit31 (polling for it to toggle from 0 -> 1). Instead
we need a two-step completion wait-for-completion flow that also
involves GU_CNTL. See the patch and new code comments for detail.
This is new direction from HW architecture folks.
v2: - Add error message for the teardown timeout (Anshuman)
- Don't duplicate code in comments (Jani)
v3: - Add get/put runtime-pm for this function. Though
not functionally required during unload, its so the uncore
doesn't complain.
v4: - Remove the get/put runtime-pm - that was for a prior
version of this patch (not needed for drm-managed callback).
- Remove the fixes tag since this is only for MTL and MTL
still needs force probe (Daniele).
- Bit 31 of GU_CNTL should be DRIVERFLR instead of
DRIVERFLR_STATUS (Daniele).
Signed-off-by: Alan Previn <[email protected]>
Tested-by: Vinay Belgaumkar <[email protected]>
Reviewed-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull drm fixes from Dave Airlie:
"fbdev:
- fix uninit var in error path
shmem:
- revert unGPLing an export
i915:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices
amdkfd:
- SDMA fix
- Illegal memory access fix"
* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
drm/amdgpu/vcn: fix compilation issue with legacy gcc
drm/amd/display: Extend Freesync over PCon support for more devices
Revert "drm/amd/display: Do not set DRR on pipe commit"
drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
drm/amd/display: Ext displays with dock can't recognized after resume
drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
drm/amdgpu: remove unused variable ring
drm/amd/display: fix dm irq error message in gpu recover
drm/amd: Fix initialization for nbio 7.5.1
drm/amd/display: Don't restrict bpc to 8 bpc
drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
drm/radeon: Fix eDP for single-display iMac11,2
drm/shmem-helper: Revert accidental non-GPL export
drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
drm/amd/pm: downgrade log level upon SMU IF version mismatch
drm/amdgpu: Add ecc info query interface for umc v8_10
drm/amdgpu: Add convert_error_address function for umc v8_10
drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
drm/amdgpu: change default behavior of bad_page_threshold parameter
drm/amdgpu: exclude duplicate pages from UMC RAS UE count
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.3-2023-03-02:
amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices
amdkfd:
- SDMA fix
- Illegal memory access fix
radeon:
- Display fix for iMac11,2
UAPI:
- Add some additional INFO IOCTL queries for GC 11 fixes
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v6.3-rc1:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
Fixes uninitialized variables in fbdev error paths and reverts an
SHMEM-helper symbol back to being exported as GPL.
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/3Fw1HjgPcplo+j@linux-uq9g
|
|
Make sure to clear the transfer buffer before fetching the EDID to
avoid leaking slab data to the logs on errors that leave the buffer
unchanged.
Fixes: 69c7717c20cc ("drm/edid: Dump the EDID when drm_edid_get_panel_id() has an error")
Cc: [email protected] # 6.2
Cc: Douglas Anderson <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Set the "pre_enable_prev_first" as provided by commit 4fb912e5e190
("drm/bridge: Introduce pre_enable_prev_first to alter bridge init
order"). This should allow us to revert commit ec7981e6c614
("drm/msm/dsi: don't powerup at modeset time for parade-ps8640") and
commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
time").
Cc: Dave Stevenson <[email protected]>
Cc: Dmitry Baryshkov <[email protected]>
Cc: Abhinav Kumar <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131141756.RFT.v2.1.I723a3761d57ea60c5dd754c144aed6c3b2ea6f5a@changeid
|
|
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {
Signed-off-by: bobzhou <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|