| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
That function is not defined anywhere.
Signed-off-by: Gustavo Sousa <[email protected]>
Reviewed-by: Ravi Kumar Vodapalli <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Swap tests parameters names so they actually reflect what is being tested.
Signed-off-by: Carlos Eduardo Gallo Filho <[email protected]>
Reviewed-by: André Almeida <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
Don't populate the const array on the stack, instead make it static.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934c12b.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68bcb4 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
|
|
Detection of the configuration mode and the chipset model are
linked to each other. One uses values from the other; namely the
PCI device revision and the SCU revision. Merge this code into
a single function.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Reviewed-by: Sui Jingfeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Split ast_detect_chip() into three functions and call them one by
one. The new functions detect the transmitter chip and widescreen
support. This will allow for further refactoring.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Tested-by: Sui Jingfeng <[email protected]> # AST2400
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Detect the 6th-generation AST 2510. Allows to simplify the code
for widescreen support.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Detect the 5th-generation AST 1400. Allows to simplify the code
for widescreen support.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Detect the 4th-generation AST 1300. Allows to simplify the code
for widescreen support.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
ASpeed distinguishes among various generations of the AST graphics
chipset with various models. [1] The most-recent model AST 2600 is
of the 7th generation, the AST 2500 is of the 6th generation, and so
on.
The ast driver simply picks one of the models as representative for
the whole generation. In several places, individual models of the
same generation need to be handled differently, which then requires
additional code for detecting the model.
Introduce different generations of the Aspeed chipset. In the source
code, refer to the generation instead of the representation model where
possible. The few places that require per-model handling are now clearly
marked.
In the enum ast_chip, we arrange each model's value such that it
encodes the generation. This allows for an easy test. The actual values
are ordered, but not of interest to the driver.
v2:
* use __ast_gen_is_eq() (Jingfeng)
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://web.archive.org/web/20141007093258/http://www.aspeedtech.com/products.php?fPath=20 # 1
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Reviewed-by: Sui Jingfeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Ast sets up a managed release of the MMIO access flags. Move this
code next to the MMIO access code, so that it runs if other errors
occur during the device initialization.
Signed-off-by: Thomas Zimmermann <[email protected]>
Tested-by: Sui Jingfeng <[email protected]> # AST2400
Reviewed-by: Sui Jingfeng <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
POST and memory management contains code to enable access to the
device's memory spaces. This is too late. Consolidate this code at
the beginning of the device initialization.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Access to I/O registers is required to detect and set up the
device. Enable the rsp PCI config bits before. While at it,
convert the magic number to macro constants.
Enabling the PCI config bits was done after trying to detect
the device. It was probably too late at this point.
v2:
* use standard 16-bit PCI r/w access (Jingfeng)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Reviewed-by: Sui Jingfeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There's way too much going on in ast_detect_chip(). Move the POST
and config code from the top of the function into the caller. No
functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
According to the chip detection in ast_detect_chip(), AST2300 and
later always have a PCI revision of 0x20 or higher. Therefore the
code in ast_set_def_ext_reg() can not use the else branch when
selecing the EXT register values. Remove the dead branch and the
related values.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There are already a number of register I/O functions in ast_drv.h.
For consistency, move the remaining functions there as well. No
functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove the unused field vga2_clone from struct ast_device. No
functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the test for the AST2200 in the DRAM initialization. The value
in ast->chip has to be compared against an enum constant instead of
a numerical value.
This bug got introduced when the driver was first imported into the
kernel.
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Dave Airlie <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v3.5+
Reviewed-by: Sui Jingfeng <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Tested-by: Jocelyn Falempe <[email protected]> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add the seq_file struct forward declaration to intel_display_power.h
fixing the build error below. While at it add the rest of missing
forward declarations/includes to the display power header files.
In file included from <command-line>:
./../drivers/gpu/drm/i915/display/intel_display_power.h:255:70: error: 'struct seq_file'
declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
255 | void intel_display_power_debug(struct drm_i915_private *i915, struct seq_file *m);
| ^~~~~~~~
Closes: https://lore.kernel.org/intel-gfx/[email protected]/
Reported-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Tested-by: Randy Dunlap <[email protected]> # build-tested
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f4fab137dd2bc7dfdf8d17f8c53c472a5316109c)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
ttm_bo_swapout() shadows the ttm operation context which may cause
major confusion in driver callbacks when swapping out !TTM_PL_SYSTEM
memory. Fix this by reusing the operation context argument to
ttm_bo_swapout().
Cc: "Christian König" <[email protected]>
Cc: Roger He <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Acked-by: Matthew Brost <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The hdmi_datamap enum is no longer in use. Also reindent enable_audio's
call params.
Signed-off-by: Adrián Larumbe <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ca42985814e9be33b7f8e3a33cea9e18505299e3.1687702042.git.adrian.larumbe@collabora.com
|
|
The current output bus format selection logic is enforcing YUV420 even
when the drm mode allows for other bus formats as well.
Fix it by adding check for 420-only drm modes.
Signed-off-by: Adrián Larumbe <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/6e6a217c180584a67ed7992c785764ba54af9151.1687702042.git.adrian.larumbe@collabora.com
|
|
Right now clocking value selection code is prioritising RGB, YUV444 modes
over YUV420 for HDMI2 sinks. However, because of the bus format selection
procedure in dw-hdmi, for HDMI2 sinks YUV420 is the format that will always
be picked during the drm bridge chain check stage.
Later on dw_hdmi_setup will configure a colour space based on the bus
format that doesn't match the pixel value we had calculated as described
above.
Fix it by bringing back dw-hdmi bus format check when picking the right
pixel clock.
Signed-off-by: Adrián Larumbe <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/6230bfae2cd97cf6527fc62ba5c850464919ccf8.1687702042.git.adrian.larumbe@collabora.com
|
|
If moving the bo to system for swapout failed, we were leaking
a resource. Fix.
Fixes: bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2")
Cc: Christian König <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v5.14+
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On eviction errors other than -EMULTIHOP we were leaking a resource.
Fix.
v2:
- Avoid yet another goto (Andi Shyti)
Fixes: 403797925768 ("drm/ttm: Fix multihop assert on eviction.")
Cc: Andrey Grodzovsky <[email protected]>
Cc: Christian König <[email protected]>
Cc: Christian Koenig <[email protected]>
Cc: Huang Rui <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v5.15+
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]> #v1
Reviewed-by: Andi Shyti <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Memory for the "struct device" for any given device isn't supposed to
be released until the device's release() is called. This is important
because someone might be holding a kobject reference to the "struct
device" and might try to access one of its members even after any
other cleanup/uninitialization has happened.
Code analysis of ti-sn65dsi86 shows that this isn't quite right. When
the code was written, it was believed that we could rely on the fact
that the child devices would all be freed before the parent devices
and thus we didn't need to worry about a release() function. While I
still believe that the parent's "struct device" is guaranteed to
outlive the child's "struct device" (because the child holds a kobject
reference to the parent), the parent's "devm" allocated memory is a
different story. That appears to be freed much earlier.
Let's make this better for ti-sn65dsi86 by allocating each auxiliary
with kzalloc and then free that memory in the release().
Fixes: bf73537f411b ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers")
Suggested-by: Stephen Boyd <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613065812.v2.1.I24b838a5b4151fb32bccd6f36397998ea2df9fbb@changeid
|
|
Fix Sphinx warning about unexpected indent.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Luca Coelho <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DC states are disabled / re-enabled around each modeset, which may lead
to a needless off->on->off toggling of the DC_off power well. This has
some overhead as toggling DC states involves running a DMC firmware
handler and also running a periodic firmware handler while DC states are
enabled. The limit of when DC states have a benefit is at 30 FPS (using
DC3co) and below 30 FPS (using DC5/6), where the firmware can actually
disable clocks / power off power wells. Accordingly delay powering off
the DC_off powerwell (which re-enables DC states) by 17 ms at the end of
a modeset to avoid the above overhead at or above 60 FPS.
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for specifying a delay different than the current 100 ms
default for powering off a display power domain. This is needed by the
next patch which delays re-enabling DC states during modesets to avoid
the off->on->off toggling overhead of the DC_off power well, but does
this using a < 100 ms delay for a better utilization of DC power saving
states.
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove the forward declarations for enums and structs from display power
header files that aren't used in prototypes.
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add the seq_file struct forward declaration to intel_display_power.h
fixing the build error below. While at it add the rest of missing
forward declarations/includes to the display power header files.
In file included from <command-line>:
./../drivers/gpu/drm/i915/display/intel_display_power.h:255:70: error: 'struct seq_file'
declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
255 | void intel_display_power_debug(struct drm_i915_private *i915, struct seq_file *m);
| ^~~~~~~~
Closes: https://lore.kernel.org/intel-gfx/[email protected]/
Reported-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Tested-by: Randy Dunlap <[email protected]> # build-tested
Reviewed-by: Jouni Högander <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Unexport drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd().
Both are only used internally within the PRIME code.
v2:
* reword docs as functions are now unexported (Simon)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Simon Ser <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Jeffrey Hugo <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Clear all assignments of struct drm_driver's fd/handle callbacks to
drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These
functions are called by default. Add a TODO item to convert vmwgfx
to the defaults as well.
v2:
* remove TODO item (Zack)
* also update amdgpu's amdgpu_partition_driver
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Simon Ser <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Acked-by: Jeffrey Hugo <[email protected]> # qaic
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Call drm_gem_prime_handle_to_fd() and drm_gem_prime_fd_to_handle() by
default if no PRIME import/export helpers have been set. Both functions
are the default for almost all drivers.
DRM drivers implement struct drm_driver.gem_prime_import_sg_table
to import dma-buf objects from other drivers. Having the function
drm_gem_prime_fd_to_handle() functions set by default allows each
driver to import dma-buf objects to itself, even without support for
other drivers.
For drm_gem_prime_handle_to_fd() it is similar: using it by default
allows each driver to export to itself, even without support for other
drivers.
This functionality enables userspace to share per-driver buffers
across process boundaries via PRIME (e.g., wlroots requires this
functionality). The patch generalizes a pattern that has previously
been implemented by GEM VRAM helpers [1] to work with any driver.
For example, gma500 can now run the wlroots-based sway compositor.
v2:
* clean up docs and TODO comments (Simon, Zack)
* clean up style in drm_getcap()
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://lore.kernel.org/dri-devel/[email protected]/ # 1
Reviewed-by: Simon Ser <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Jeffrey Hugo <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently hdcp->content_type is being assigned the content_type field
in drm_connector_state which is wrong and instead it needs to be
assigned hdcp_content_type field from drm_connector_state
Fixes: 4c4279a8d58d ("drm/i915/hdcp: add intel_atomic_state argument to hdcp_enable function")
Cc: Jani Nikula <[email protected]>
Cc: Ankit Nautiyal <[email protected]>
Cc: Animesh Manna <[email protected]>
Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Ankit Nautiyal <[email protected]>
Signed-off-by: Ankit Nautiyal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 86a124424efce353778c4fab355e185e4781b63e)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
The scenario being fixed here is depicted in the following sequence-
modprobe i915
echo 1 > /sys/class/drm/card0/gt/gt0/slpc_ignore_eff_freq
echo 300 > /sys/class/drm/card0/gt_min_freq_mhz (RPn)
cat /sys/class/drm/card0/gt_cur_freq_mhz --> cur == RPn as expected
echo 1 > /sys/kernel/debug/dri/0/gt0/reset --> reset
cat /sys/class/drm/card0/gt_min_freq_mhz --> cached freq is RPn
cat /sys/class/drm/card0/gt_cur_freq_mhz --> it's not RPn, but RPe!!
When SLPC reinitializes, it sets SLPC min freq to efficient frequency.
Even if we disable efficient freq post that, we should restore the cached
min freq (via H2G) for it to take effect.
v2: Clarify commit message (Ashutosh)
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Reviewed-by: Ashutosh Dixit <[email protected]>
Signed-off-by: Vinay Belgaumkar <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit da86b2b13f1d1ca26745b951ac94421f3137539a)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
Encoder compute config is changing hw.adjusted mode. Uapi.adjusted mode
doesn't get updated before psr compute config gets called. This causes io
and fast wake line calculation using adjusted mode containing values before
encoder adjustments. Fix this by using hw.adjusted mode instead of
uapi.adjusted mode.
Cc: Stanislav Lisovskiy <[email protected]>
Signed-off-by: Jouni Högander <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8475
Fixes: cb42e8ede5b4 ("drm/i915/psr: Use calculated io and fast wake lines")
Reviewed-by: Mika Kahola <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ef0af9db2a21257885116949f471fe5565b2f0ab)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
Driver does not clear the default SSC for MPLLA. This causes link training
failure when trying to use 10G and 20G rates. Fix the behaviour and enable
ssc only when we really want.
Fixes: 237e7be0bf57 ("drm/i915/mtl: For DP2.0 10G and 20G rates use MPLLA")
Cc: Mika Kahola <[email protected]>
Cc: Clint Taylor <[email protected]>
Cc: Khaled Almahallawy <[email protected]>
Cc: Arun R Murthy <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Tested-by: Khaled Almahallawy <[email protected]>
Reviewed-by: Mika Kahola <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 7e8d87e2da3b359ad73246233673a84c4dabfa07)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
A recent bspec update added a restriction on when DC states can be enabled:
[Before enabling DC states:]
"""
PG2 can be kept enabled only because PGB requires PG2.
Do not use PG2 functions, such as type-C DDIs.
DMC will dynamically control PG1, PGA, PG2, PGB.
"""
Accordingly prevent DC states if PW2 (aka PG2) is enabled for any other
functionality.
Bpsec: 49193
Fixes: 88c487938414 ("drm/i915: Use separate "DC off" power well for ADL-P and DG2")
Reported-by: Kai Vehmanen <[email protected]>
Tested-by: Ambica Pramod <[email protected]>
Reviewed-by: Uma Shankar <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f4e498eb1247d25231198856b57bbae00f403c85)
Signed-off-by: Tvrtko Ursulin <[email protected]>
|
|
kmap() has been deprecated in favor of the kmap_local_page()
due to high cost, restricted mapping space, the overhead of a
global lock for synchronization, and making the process sleep
in the absence of free slots.
kmap_local_page() is faster than kmap() and offers thread-local
and CPU-local mappings, can take pagefaults in a local kmap region
and preserves preemption by saving the mappings of outgoing tasks
and restoring those of the incoming one during a context switch.
The mapping is kept thread local in the function
“i915_vma_coredump_create” in i915_gpu_error.c
Therefore, replace kmap() with kmap_local_page().
Suggested-by: Ira Weiny <[email protected]>
Signed-off-by: Sumitra Sharma <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Reviewed-by: Fabio M. De Francesco <[email protected]>
Signed-off-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
[tursulin: Removed blank line within tags. Fixup commit text.]
|
|
Drivers that can delegate waits to the firmware/GPU pass the scheduled
fence to drm_sched_job_add_dependency(), and issue wait commands to
the firmware/GPU at job submission time. For this to be possible, they
need all their 'native' dependencies to have a valid parent since this
is where the actual HW fence information are encoded.
In drm_sched_main(), we currently call drm_sched_fence_set_parent()
after drm_sched_fence_scheduled(), leaving a short period of time
during which the job depending on this fence can be submitted.
Since setting parent and signaling the fence are two things that are
kinda related (you can't have a parent if the job hasn't been scheduled),
it probably makes sense to pass the parent fence to
drm_sched_fence_scheduled() and let it call drm_sched_fence_set_parent()
before it signals the scheduled fence.
Here is a detailed description of the race we are fixing here:
Thread A Thread B
- calls drm_sched_fence_scheduled()
- signals s_fence->scheduled which
wakes up thread B
- entity dep signaled, checking
the next dep
- no more deps waiting
- entity is picked for job
submission by drm_gpu_scheduler
- run_job() is called
- run_job() tries to
collect native fence info from
s_fence->parent, but it's
NULL =>
BOOM, we can't do our native
wait
- calls drm_sched_fence_set_parent()
v2:
* Fix commit message
v3:
* Add a detailed description of the race to the commit message
* Add Luben's R-b
Signed-off-by: Boris Brezillon <[email protected]>
Cc: Frank Binns <[email protected]>
Cc: Sarah Walker <[email protected]>
Cc: Donald Robson <[email protected]>
Cc: Luben Tuikov <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: "Christian König" <[email protected]>
Reviewed-by: Luben Tuikov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add a debug statement at hdcp2 capability check which indicates if
GSC CS is causing hdcp2 incapability
--v2
-correcttypo in commit header
--v3
-correct the other typo in commit header [Jani]
Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Chaitanya Kumar Borah <[email protected]>
Signed-off-by: Ankit Nautiyal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently hdcp->content_type is being assigned the content_type field
in drm_connector_state which is wrong and instead it needs to be
assigned hdcp_content_type field from drm_connector_state
Fixes: 4c4279a8d58d ("drm/i915/hdcp: add intel_atomic_state argument to hdcp_enable function")
Cc: Jani Nikula <[email protected]>
Cc: Ankit Nautiyal <[email protected]>
Cc: Animesh Manna <[email protected]>
Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Ankit Nautiyal <[email protected]>
Signed-off-by: Ankit Nautiyal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead.
Fixes: cb285a5348e7 ("drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()")
Cc: [email protected] # 5.19+
Signed-off-by: Liu Ying <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
All convertions from the ARGB16161616 format follow the same structure.
Instead of repeting the same structure for each supported format, create
a function to encapsulate the common logic and isolate the pixel
conversion functions in a callback function.
Suggested-by: Melissa Wen <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Reviewed-by: Arthur Grillo <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The VKMS already has a function to convert ARGB16161616 to ARGB8888, so
it is possible to use this function to provide the writeback support for
the ARGB8888 format. Therefore, add the ARGB8888 format to the writeback
format list.
Signed-off-by: Maíra Canal <[email protected]>
Reviewed-by: Arthur Grillo <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The spinlock composer_lock protects the variables crc_pending,
wb_pending, frame_start and frame_end, which are variables that are used
by the composer worker. There is no need to protect the wb_frame_info
information with a spinlock. Therefore, reduce the critical section of
the lock by removing the assignments to the wb_frame_info from the
critical section.
Signed-off-by: Maíra Canal <[email protected]>
Reviewed-by: Arthur Grillo <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove one of the last remaining users of pagevec.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|