aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2023-08-30drm/amdgpu/discovery: add nbio 7.11.0 supportPrike Liang1-0/+5
Add to IP discovery table. Signed-off-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: add nbio 7.11 supportbenl3-1/+277
Add initial nbio 7.11 implementation. Signed-off-by: benl <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: add nbio 7.11 registersbenl2-0/+67237
Add register headers. v2: Updates (Alex) v3: Updates (Alex) v4: Updates (Alex) Signed-off-by: benl <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu/discovery: enable soc21 supportPrike Liang1-0/+1
Add 11.5.0 to IP discovery table. Signed-off-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu/soc21: add initial GC 11.5.0 soc21 supportPrike Liang1-0/+6
Disable clock gating and power gating on the early bring up phase. Signed-off-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: add new AMDGPU_FAMILY definitionPrike Liang1-0/+4
add GC 11.5.0 family Signed-off-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: use 6.1.0 register offset for HDP CLK_CNTLLang Yu1-4/+16
Use 6.1.0 register offset and remove unused variable. v2: clean up logic (Alex) Signed-off-by: Lang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/radeon: possible buffer overflowKonstantin Meskhidze1-3/+4
Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. Fixes: 5cc4e5fc293b ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen") Co-developed-by: Ivanov Mikhail <[email protected]> Signed-off-by: Konstantin Meskhidze <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: fix mode scaling (RMX_.*)Hamza Mahfooz1-1/+1
As made mention of in commit 4a2df0d1f28e ("drm/amd/display: Fixed non-native modes not lighting up"), we shouldn't call drm_mode_set_crtcinfo() once the crtc timings have been decided. Since, it can cause settings to be unintentionally overwritten. So, since dm_state is never NULL now, we can use old_stream to determine if we should call drm_mode_set_crtcinfo() because we only need to set the crtc timing parameters for entirely new streams. Cc: Harry Wentland <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Fixes: bd49f19039c1 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink") Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/pm: Fix critical temp unit of SMU v13.0.6Asad Kamal1-4/+5
Critical Temperature needs to be reported in millidegree Celsius. Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Yang Wang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: Remove SRAM clock gater override by driverMangesh Gadre1-9/+0
rlc firmware does required setting, driver need not do it. Signed-off-by: Mangesh Gadre <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: Add bootloader status checkLijo Lazar3-3/+28
Add a function to wait till bootloader has reached steady state. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdkfd: use correct method to get clock under SRIOVHorace Chen1-6/+2
[What] Current SRIOV still using adev->clock.default_XX which gets from atomfirmware. But these fields are abandoned in atomfirmware long ago. Which may cause function to return a 0 value. [How] We don't need to check whether SR-IOV. For SR-IOV one-vf-mode, pm is enabled and VF is able to read dpm clock from pmfw, so we can use dpm clock interface directly. For multi-VF mode, VF pm is disabled, so driver can just react as pm disabled. One-vf-mode is introduced from GFX9 so it shall not have any backward compatibility issue. Signed-off-by: Horace Chen <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: Unset baco dummy mode on nbio v7.9Lijo Lazar1-0/+18
BACO dummy mode could be set under reset conditions and that affects framebuffer access. Check If baco dummy mode is set, unset it if so. Signed-off-by: Lijo Lazar <[email protected]> Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Write flip addr to scratch reg for subvpAlvin Lee11-1/+134
[Description] SubVP needs to "calculate" the earliest in use META address by using the current primary / meta addresses, but this leads to a race condition where FW and driver can read/write the address at the same time and intermittently produce inconsistent address offsets. To mitigate this issue without locking (too slow), save each surface flip addr into scratch registers and use this to keep track of the earliest in use META addres. Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: set minimum of VBlank_nomChunTao Tso1-1/+20
[Why] If VBlank_nom is too small, it will cause VStartUP_Start smaller than VBackPorch + VSync width which is an invalid case for VStartUP_Start and where to send AS-SDP. [How] Setup a minimum value to VBlank_nom Reviewed-by: Reza Amini <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: ChunTao Tso <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Correct unit conversion for vstartupReza Amini1-1/+24
[why] vstartup is calculated to be a large number. it works because it is within vertical blank, but it reduces region of blank that can be used for power gating. [how] Calculation needs to convert micro seconds to number of vertical lines. Reviewed-by: Kazlauskas Nicholas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Reza Amini <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Roll back unit correctionOvidiu Bunea1-24/+1
[why] This Unit correction exposes a Replay corruption. [how] This reverts commit: commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Roll back unit conversion until Replay can fix their corruption. Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Reviewed-by: Reza Amini <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Ovidiu Bunea <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Enable runtime register offset init for DCN32 DMUBAurabindo Pillai5-20/+36
[Why&How] DMUB subsystem was continuing to use compile time offset calculation for register access. Switch this to runtime calculation to stay consistent with rest of DC code. To enable this, an additional interface init_reg_offsets() are added to DMUB's hw_funcs struct. Asics with runtime register offset calculation enabled shall populate this hook with a fn pointer that will invoke the necessary macros to calculate the offset. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Refactor edp power controlIan Chen11-9/+66
[Why & How] To organize the edp power control a bit: 1. add flag in dc_link to indicate dc to skip all implicit eDP power control. 2. add edp_set_panel_power link service for DM to call. Reviewed-by: Aric Cyr <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Ian Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: PQ regamma end pointKrunoslav Kovac1-6/+109
[WHY & HOW] PQ has a fixed range of 0-10,000 nits. Using 1=80 nits normalization, PQ should map to 1.0 for X=125.0 HW LUT used for interpolation does not have X=125 so it's interpolated. However, we cap Y to 1 for all X>=125. The closest larger HW point is 128. What we want is Y(128) such that interpolation through 125 gives 1.0. Such value is ~1.00256. Another change is to hardcode PQ table, we pretty much always have 1=80 normalization so the table can be static. Reviewed-by: Aric Cyr <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Krunoslav Kovac <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: PQ tail accuracyKrunoslav Kovac2-88/+33
[WHY & HOW] HW LUTs changed slightly in DCN3: 256 base+slope pairs were replaced by 257 bases. Code was still calculating all 256 base+slope and then creating 257th pt as last base + last slope. This was done in wrong format, and then "fixed" it by making the last two points the same thus making the last slope=0. However, this also created some precision problems near the end that are not visible but they do show up with capture cards. Solution is to calculate 257 and remove deltas since we no longer have those HW registers. Reviewed-by: Anthony Koo <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Krunoslav Kovac <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Expose mall capabilityAurabindo Pillai1-0/+19
[Why&How] Export a debugfs file to report whether MALL cache is supported by the asic or not. Reviewed-by: Hersen Wu <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Fix useless else if in display_mode_vba_util_32.cSrinivasan Shanmugam1-4/+0
The assignment of the else if and else branches is the same, so the else if here is redundant, hence removed it. Fixes the below: drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c:4664:8-10: WARNING: possible condition with no effect (if == else) Cc: Hamza Mahfooz <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: Enable ras for mp0 v13_0_6 sriovYiPeng Chai1-0/+1
Enable ras for mp0 v13_0_6 sriov Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Stanley.Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/radeon: Cleanup radeon/radeon_fence.cSrinivasan Shanmugam1-59/+52
Fixes the following: WARNING: Possible repeated word: 'Fences' WARNING: Missing a blank line after declarations WARNING: braces {} are not necessary for single statement blocks WARNING: braces {} are not necessary for any arm of this statement WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: quoted string split across lines WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Cc: Guchun Chen <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Cc: "Pan, Xinhui" <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Fix unnecessary conversion to bool in 'amdgpu_dm_setup_replay'Srinivasan Shanmugam1-2/+2
Fixes the following coccicheck: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_replay.c:94:102-107: WARNING: conversion to bool not needed here drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_replay.c:102:72-77: WARNING: conversion to bool not needed here Cc: Bhawanpreet Lakha <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdkfd: retry after EBUSY is returned from hmm_ranges_get_pagesAlex Sierra1-0/+2
if hmm_range_get_pages returns EBUSY error during svm_range_validate_and_map, within the context of a page fault interrupt. This should retry through svm_range_restore_pages callback. Therefore we treat this as EAGAIN error instead, and defer it to restore pages fallback. Signed-off-by: Alex Sierra <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu/jpeg - skip change of power-gating state for sriovSamir Dhume1-2/+4
Powergating is handled in the host driver. Reviewed-by: Zhigang Luo <[email protected]> Signed-off-by: Samir Dhume <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: Keep reset handlers sharedLijo Lazar5-37/+45
Instead of maintaining a list per device, keep the reset handlers common per ASIC family. A pointer to the list of handlers is maintained in reset control. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Le Ma <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/pm: Add critical temp for GC v9.4.3Asad Kamal3-4/+55
Add critical temperature message support func for smu v13.0.6 and expose critical temperature as part of hw mon attributes for GC v9.4.3 v2: Added comment for pmfw version requirement & move the check to get_thermal_temperature_range function Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/pm: Update SMUv13.0.6 PMFW headersAsad Kamal2-3/+17
Update PMFW interface headers for updated metrics table and critical temperature message Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: update gc_info v2_1 from discoveryLe Ma3-0/+43
Several new fields are exposed in gc_info v2_1 Signed-off-by: Le Ma <[email protected]> Reviewed-by: Shiwu Zhang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: update mall info v2 from discoveryLe Ma2-1/+12
Mall info v2 is introduced in ip discovery Signed-off-by: Le Ma <[email protected]> Reviewed-by: Shiwu Zhang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu: Only support RAS EEPROM on dGPU platformCandice Li1-1/+2
RAS EEPROM device is only supported on dGPU platform for smu v13_0_6. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/amdgpu: Use kmemdup to simplify kmalloc and memcpy logicChen Jiahao1-9/+2
Using kmemdup() helper function rather than implementing it again with kmalloc() + memcpy(), which improves the code readability. Signed-off-by: Chen Jiahao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amdgpu/pm: Add notification for no DC supportBokun Zhang5-12/+11
- There is a DPM issue where if DC is not present, FCLK will stay at low level. We need to send a SMU message to configure the DPM - Reuse smu_v13_0_notify_display_change() for this purpose Reviewed-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Bokun Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/amd/display: Enable Replay for static screen use casesBhawanpreet Lakha3-1/+32
- Setup replay config on device init. - Enable replay if feature is enabled (prioritize replay over PSR, since it can be enabled in more usecases) - Add debug masks to enable replay on supported ASICs Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-08-30drm/i915: mark requests for GuC virtual engines to avoid use-after-freeAndrzej Hajda3-5/+6
References to i915_requests may be trapped by userspace inside a sync_file or dmabuf (dma-resv) and held indefinitely across different proceses. To counter-act the memory leaks, we try to not to keep references from the request past their completion. On the other side on fence release we need to know if rq->engine is valid and points to hw engine (true for non-virtual requests). To make it possible extra bit has been added to rq->execution_mask, for marking virtual engines. Fixes: bcb9aa45d5a0 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"") Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-08-30drm/i915/dg2: Add support for new DG2-G12 revid 0x1Swati Sharma1-0/+1
The bspec has been updated with a new revision 0x1 that translates to A1 GT stepping and C0 display stepping. Bspec: 44477 Signed-off-by: Swati Sharma <[email protected]> Reviewed-by: Matt Roper <[email protected]> Signed-off-by: Animesh Manna <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-30drm/i915: mark requests for GuC virtual engines to avoid use-after-freeAndrzej Hajda3-5/+6
References to i915_requests may be trapped by userspace inside a sync_file or dmabuf (dma-resv) and held indefinitely across different proceses. To counter-act the memory leaks, we try to not to keep references from the request past their completion. On the other side on fence release we need to know if rq->engine is valid and points to hw engine (true for non-virtual requests). To make it possible extra bit has been added to rq->execution_mask, for marking virtual engines. Fixes: bcb9aa45d5a0 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"") Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-30drivers/drm/i915: Honor limits->max_bpp while computing DSC max input bppAnkit Nautiyal1-2/+3
Edid specific BPC constraints are stored in limits->max_bpp. Honor these limits while computing the input bpp for DSC. v2: Use int instead of u8 for computations. (Jani) Add closes tag. (Ankit) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9161 Signed-off-by: Ankit Nautiyal <[email protected]> Reviewed-by: Stanislav Lisovskiy <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-30drm/display/dp: Assume 8 bpc support when DSC is supportedAnkit Nautiyal1-2/+6
As per DP v1.4, a DP DSC Sink device shall support 8bpc in DPCD 6Ah. Apparently some panels that do support DSC, are not setting the bit for 8bpc. So always assume 8bpc support by DSC decoder, when DSC is claimed to be supported. v2: Use helper to get check dsc support. (Ankit) v3: Fix styling and other typos. (Jani) Signed-off-by: Ankit Nautiyal <[email protected]> Acked-by: Maxime Ripard <[email protected]> Reviewed-by: Stanislav Lisovskiy <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-29drm/i915/psr: Apply Wa_14015648006 for all display 14 steppingsJouni Högander1-2/+1
According to recent Bspec Wa 14015648006 has to be applied for all display 14 steppings. Bspec: 66624 Signed-off-by: Jouni Högander <[email protected]> Reviewed-by: Matt Roper <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-29Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of ↵Linus Torvalds3-15/+8
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options") - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h") - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands") - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions") - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug") - Many singleton patches to various parts of the tree * tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits) document while_each_thread(), change first_tid() to use for_each_thread() drivers/char/mem.c: shrink character device's devlist[] array x86/crash: optimize CPU changes crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() crash: hotplug support for kexec_load() x86/crash: add x86 crash hotplug support crash: memory and CPU hotplug sysfs attributes kexec: exclude elfcorehdr from the segment digest crash: add generic infrastructure for crash hotplug support crash: move a few code bits to setup support of crash hotplug kstrtox: consistently use _tolower() kill do_each_thread() nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse scripts/bloat-o-meter: count weak symbol sizes treewide: drop CONFIG_EMBEDDED lockdep: fix static memory detection even more lib/vsprintf: declare no_hash_pointers in sprintf.h lib/vsprintf: split out sprintf() and friends kernel/fork: stop playing lockless games for exe_file replacement adfs: delete unused "union adfs_dirtail" definition ...
2023-08-29Merge tag 'mm-stable-2023-08-28-18-26' of ↵Linus Torvalds4-23/+14
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list") - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which reduces the special-case code for handling hugetlb pages in GUP. It also speeds up GUP handling of transparent hugepages. - Peng Zhang provides some maple tree speedups ("Optimize the fast path of mas_store()"). - Sergey Senozhatsky has improved te performance of zsmalloc during compaction (zsmalloc: small compaction improvements"). - Domenico Cerasuolo has developed additional selftest code for zswap ("selftests: cgroup: add zswap test program"). - xu xin has doe some work on KSM's handling of zero pages. These changes are mainly to enable the user to better understand the effectiveness of KSM's treatment of zero pages ("ksm: support tracking KSM-placed zero-pages"). - Jeff Xu has fixes the behaviour of memfd's MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED"). - David Howells has fixed an fscache optimization ("mm, netfs, fscache: Stop read optimisation when folio removed from pagecache"). - Axel Rasmussen has given userfaultfd the ability to simulate memory poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD"). - Miaohe Lin has contributed some routine maintenance work on the memory-failure code ("mm: memory-failure: remove unneeded PageHuge() check"). - Peng Zhang has contributed some maintenance work on the maple tree code ("Improve the validation for maple tree and some cleanup"). - Hugh Dickins has optimized the collapsing of shmem or file pages into THPs ("mm: free retracted page table by RCU"). - Jiaqi Yan has a patch series which permits us to use the healthy subpages within a hardware poisoned huge page for general purposes ("Improve hugetlbfs read on HWPOISON hugepages"). - Kemeng Shi has done some maintenance work on the pagetable-check code ("Remove unused parameters in page_table_check"). - More folioification work from Matthew Wilcox ("More filesystem folio conversions for 6.6"), ("Followup folio conversions for zswap"). And from ZhangPeng ("Convert several functions in page_io.c to use a folio"). - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext"). - Baoquan He has converted some architectures to use the GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take GENERIC_IOREMAP way"). - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support batched/deferred tlb shootdown during page reclamation/migration"). - Better maple tree lockdep checking from Liam Howlett ("More strict maple tree lockdep"). Liam also developed some efficiency improvements ("Reduce preallocations for maple tree"). - Cleanup and optimization to the secondary IOMMU TLB invalidation, from Alistair Popple ("Invalidate secondary IOMMU TLB on permission upgrade"). - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes for arm64"). - Kemeng Shi provides some maintenance work on the compaction code ("Two minor cleanups for compaction"). - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most file-backed faults under the VMA lock"). - Aneesh Kumar contributes code to use the vmemmap optimization for DAX on ppc64, under some circumstances ("Add support for DAX vmemmap optimization for ppc64"). - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client data in page_ext"), ("minor cleanups to page_ext header"). - Some zswap cleanups from Johannes Weiner ("mm: zswap: three cleanups"). - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan"). - VMA handling cleanups from Kefeng Wang ("mm: convert to vma_is_initial_heap/stack()"). - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes: implement DAMOS tried total bytes file"), ("Extend DAMOS filters for address ranges and DAMON monitoring targets"). - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction"). - Liam Howlett has improved the maple tree node replacement code ("maple_tree: Change replacement strategy"). - ZhangPeng has a general code cleanup - use the K() macro more widely ("cleanup with helper macro K()"). - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap on memory feature on ppc64"). - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list in page_alloc"), ("Two minor cleanups for get pageblock migratetype"). - Vishal Moola introduces a memory descriptor for page table tracking, "struct ptdesc" ("Split ptdesc from struct page"). - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups for vm.memfd_noexec"). - MM include file rationalization from Hugh Dickins ("arch: include asm/cacheflush.h in asm/hugetlb.h"). - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text output"). - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use object_cache instead of kmemleak_initialized"). - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor and _folio_order"). - A VMA locking scalability improvement from Suren Baghdasaryan ("Per-VMA lock support for swap and userfaults"). - pagetable handling cleanups from Matthew Wilcox ("New page table range API"). - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop using page->private on tail pages for THP_SWAP + cleanups"). - Cleanups and speedups to the hugetlb fault handling from Matthew Wilcox ("Change calling convention for ->huge_fault"). - Matthew Wilcox has also done some maintenance work on the MM subsystem documentation ("Improve mm documentation"). * tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits) maple_tree: shrink struct maple_tree maple_tree: clean up mas_wr_append() secretmem: convert page_is_secretmem() to folio_is_secretmem() nios2: fix flush_dcache_page() for usage from irq context hugetlb: add documentation for vma_kernel_pagesize() mm: add orphaned kernel-doc to the rst files. mm: fix clean_record_shared_mapping_range kernel-doc mm: fix get_mctgt_type() kernel-doc mm: fix kernel-doc warning from tlb_flush_rmaps() mm: remove enum page_entry_size mm: allow ->huge_fault() to be called without the mmap_lock held mm: move PMD_ORDER to pgtable.h mm: remove checks for pte_index memcg: remove duplication detection for mem_cgroup_uncharge_swap mm/huge_memory: work on folio->swap instead of page->private when splitting folio mm/swap: inline folio_set_swap_entry() and folio_swap_entry() mm/swap: use dedicated entry for swap in folio mm/swap: stop using page->private on tail pages for THP_SWAP selftests/mm: fix WARNING comparing pointer to 0 selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check ...
2023-08-29drm: Add initial ci/ subdirectoryTomeu Vizoso65-0/+5355
Developers can easily execute several tests on different devices by just pushing their branch to their fork in a repository hosted on gitlab.freedesktop.org which has an infrastructure to run jobs in several runners and farms with different devices. There are also other automated tools that uprev dependencies, monitor the infra, and so on that are already used by the Mesa project, and we can reuse them too. Also, store expectations about what the DRM drivers are supposed to pass in the IGT test suite. By storing the test expectations along with the code, we can make sure both stay in sync with each other so we can know when a code change breaks those expectations. Also, include a configuration file that points to the out-of-tree CI scripts. This will allow all contributors to drm to reuse the infrastructure already in gitlab.freedesktop.org to test the driver on several generations of the hardware. Signed-off-by: Tomeu Vizoso <[email protected]> Signed-off-by: Helen Koike <[email protected]> Acked-by: Daniel Stone <[email protected]> Acked-by: Rob Clark <[email protected]> Tested-by: Rob Clark <[email protected]> [sima: Remove top-level empty file test, spotted by sfr] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-29drm/i915/mtl: Update workaround 14016712196Tejas Upadhyay1-4/+3
Now this workaround is permanent workaround on MTL and DG2, earlier we used to apply on MTL A0 step only. VLK-45480 Fixes: d922b80b1010 ("drm/i915/gt: Add workaround 14016712196") Signed-off-by: Tejas Upadhyay <[email protected]> Acked-by: Nirmoy Das <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-29drm/i915/sdvo: Print out the i2c pin and slave addressVille Syrjälä1-0/+4
To reduce the guesswork a bit let's print out the SDVO device i2c bus and slave address during init. Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-29drm/i915/sdvo: Rework DDC bus handlingVille Syrjälä1-91/+114
Each SDVO device can have up to three sets of DDC pins. Currently we just register a single i2c_adapter for the entire SDVO device and semi-randomly pick the "correct" set of DDC pins during intel_sdvo_tmds_sink_detect(). This doesn't make any real sense especially if we have multiple outputs each with their own dedicated DDC bus. Let's clean up this mess and register a dedicated i2c_adapter for each of the possible pin pairs. Each output (ie. connector) can then pick the correct i2c_adapter to use for its DDC bus. And we can just switch over to drm_connector_init_with_ddc() to take care of the connector->ddc association, which also populates the "ddc" sysfs symlink as a bonus. And now that things are based on the actual connector we can also nuke the sketchy sdvo->controller_output thing. Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.