| Age | Commit message (Collapse) | Author | Files | Lines |
|
- Override the det to adjust microschedule timings allow for
1080p configs with SubVP
- To lower unnecessary risk, we prevent multi 1080p configs
from using SubVP, as multi 1080p already has low idle power.
- Count the number of streams to verify that we are in a
SubVP config before overriding
Reviewed-by: Alvin Lee <[email protected]>
Acked-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Ethan Bitnun <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For APUs with SMU v13.0.6, mode-2 reset is kept as default and for
others mode-1 is the default reset method.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Tested-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
new algorithm"
This partially reverts commit 460ea8980511 ("drm/amd/display: update add
plane to context logic with a new algorithm").
The new secondary pipe allocation logic triggers an issue with a
specific hardware state transition and causes a frame of corruption when
toggling between windowed MPO and ODM desktop only mode. Ideally hwss is
supposed to handle this scenario. We are temporarily reverting the logic
and investigate the root cause why this transition would cause
corruptions.
Fixes: 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm")
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Wenjing Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch will add header files for MP 14.0.0.
v2: updates (Alex)
Signed-off-by: Li Ma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_doorbell_mgr.c:123: warning: Function parameter or member 'doorbell_index' not described in 'amdgpu_doorbell_index_on_bar'
drivers/gpu/drm/amd/amdgpu/amdgpu_doorbell_mgr.c:123: warning: Excess function parameter 'db_index' description in 'amdgpu_doorbell_index_on_bar'
Reviewed-by: Shashank Sharma <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
can be stored
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c: In function ‘imu_v11_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:54: warning: ‘_imu.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
values
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c: In function ‘amdgpu_sdma_init_microcode’:
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:217:64: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 0 and 32 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:217:17: note: ‘snprintf’ output between 13 and 52 bytes into a destination of size 40
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:215:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:215:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
values
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_sysfs_create’:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1406:20: warning: ‘_err_count’ directive output may be truncated writing 10 bytes into a region of size between 1 and 32 [-Wformat-truncation=]
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1405:9: note: ‘snprintf’ output between 11 and 42 bytes into a destination of size 32
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:516: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_mm_wreg_mmio_rlc'
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/radeon/radeon_ttm.c: In function ‘radeon_bo_move’:
drivers/gpu/drm/radeon/radeon_ttm.c:201:27: warning: variable ‘rbo’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There is a spelling mistake in variable throtting_events, rename
it to throttling_events.
Reviewed-by: Yang Wang <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
kvzalloc() can be used instead of kvmalloc() + memset() + explicit NULL
assignments.
It is less verbose and more future proof.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Now that there is an explicit flexible array at the end of 'struct
amdgpu_bo_list', it can be used to remove amdgpu_bo_list_array_entry() and
simplify some macro.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The case where 'num_entries' is too big, is already handled by
struct_size(), because kvmalloc() would fail.
It will return -ENOMEM instead of -EINVAL, but it is only related to a
unlikely to happen sanity check.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
amdgpu_bo_list'
'struct amdgpu_bo_list' is really used as if it was ended by a flex array.
So make it more explicit and add a 'struct amdgpu_bo_list_entry entries[]'
field at the end of the structure.
This way, struct_size() can be used when it is allocated.
It is less verbose.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().
Cc: [email protected]
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit")
Suggested-by: Swapnil Patel <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Disable gfx ras command is needed in some use cases
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Implement the wait for bootloader call back for PSP v13.0 ASICs. Only
for ASICs with PSP v13.0.6, it needs an additional check for VBIOS
mailbox status.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Tested-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
fbcon requires that we implement &drm_framebuffer_funcs.dirty.
Otherwise, the framebuffer might take a while to flush (which would
manifest as noticeable lag). However, we can't enable this callback for
non-fbcon cases since it may cause too many atomic commits to be made at
once. So, implement amdgpu_dirtyfb() and only enable it for fbcon
framebuffers (we can use the "struct drm_file file" parameter in the
callback to check for this since it is only NULL when called by fbcon,
at least in the mainline kernel) on devices that support atomic KMS.
Cc: Aurabindo Pillai <[email protected]>
Cc: Mario Limonciello <[email protected]>
Cc: [email protected] # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Replace print_clock_levels with emit_clock_levels for arcturus
* replace .print_clk_levels with .emit_clk_levels in arcturus_ppt_funcs
* added extra parameter int *offset
* removed var size, uses arg *offset instead
* removed call to smu_cmn_get_sysfs_buf
* errors are returned to caller
* returns 0 on success
additional incidental changes
* changed type of var i, now to remove comparing mismatch types
* renamed var s/now/cur_value/
* switch statement default now returns -EINVAL
* RAS Recovery returns -EBUSY
Based on
commit b06b48d7ddae ("amdgpu/pm: Implement emit_clk_levels for navi10")
Signed-off-by: Darren Powell <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fulfill the incomplete SMU13 `pp_dpm_dcefclk` implementation.
Reported-by: Guan Yu <[email protected]>
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The voltage offset setting will be applied to the whole v/f curve line
instead of per anchor point base.
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Since the smu firmware has fixed the issue that described in the commit 60d61f4ed6ea
("drm/amdgpu/pm: fix the Stable pstate Test in amdgpu_test").
So we only need keep dpm status check in the funciton - smu_v13_0_5_set_soft_freq_limited_range.
Signed-off-by: Jesse Zhang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
for older BIOS, smu won't fill average field of gpu_metrics_table, so we acquire
average_* from current field. but now average value is available in gpu_metrics_v2_4
Signed-off-by: Kun Liu <[email protected]>
Acked-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The val is defined as unsigned int type, if(val<0) is invalid, hence
modified its type to ssize_t
Fixes the below:
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2800:5-8: WARNING: Unsigned expression compared with zero: val < 0
drivers/gpu/drm/amd/pm/amdgpu_pm.c:2813:5-8: WARNING: Unsigned expression compared with zero: val < 0
Cc: Guchun Chen <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Pan, Xinhui" <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Sensor fetching functions should return an signed int to
handle errors properly.
Reviewed-by: Srinivasan Shanmugam <[email protected]>
Reported-by: Jiapeng Chong <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update TCP/UTCL1 thrashing control settings
v2: updated rev_id check
Signed-off-by: Mangesh Gadre <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Replace kzalloc(n * sizeof(...), ...) with kcalloc(n, sizeof(...), ...)
since kcalloc is the preferred API in case of allocating with multiply.
Fixes the below:
WARNING: Prefer kcalloc over kzalloc with multiply
Cc: Guchun Chen <[email protected]>
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Pan, Xinhui" <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Print both input and avg power.
Fixes: 47f1724db4fe ("drm/amd: Introduce `AMDGPU_PP_SENSOR_GPU_INPUT_POWER`")
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If mGPUs is on same IOMMU group, or is ram direct mapped, then mGPUs
can share the original BO for GTT mapping dma address, without creating
new BO from export/import dmabuf.
Signed-off-by: Philip Yang <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
amdgpu_device_mode1_reset will return gpu mode1_reset
succeed (ret = 0) as long as wait_for_bootloader call
succeed, regardless of the status reported by smu or
psp firmware. This results to driver continue executing
recovery even smu or psp fail to perform mode1 reset.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This version brings along following fixes:
- Ensure FS is enabled before sending request to DMUB for FS changes
- Add check for PMFW hard min request complete
- Save addr update in scratch before flip
- Fix static screen detection setting
- Write flip addr to scratch reg for subvp
- set minimum of VBlank_nom
- Correct unit conversion for vstartup
- Roll back unit correction
- Enable runtime register offset init for DCN32 DMUB
- Refactor edp power control
- PQ regamma end point
- PQ tail accuracy
- Expose mall capability
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Aric Cyr <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
- Remove unused flag otg_powered_down
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Anthony Koo <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
changes
[Why]
ignore_msa_timing_param indicates FS is capable but not necessarily enabled
[How]
add check for either allow_freesync or vrr_active_variable to confirm FS is enabled
Reviewed-by: Alvin Lee <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Samson Tam <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
When we issue hard min request to PMFW, the ack back does not
guarantee the request has been fulfilled.
[How]
Add new PMFW message to check if the hard min request has been
completed. Returned bit mask indicates which clock requests are
completed. Check PMFW version before using message
Reviewed-by: Alvin Lee <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Samson Tam <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
Fix a minor sequencing issue where the address update for
a subvp flip should be saved in scratch registers before
the actual flip
Reviewed-by: Austin Zheng <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3,
but we still follow DCN2 to apply setting for
OTG_STATIC_SCREEN_EVENT_MASK.
[How]
Add new function to apply correct settings for DCN3 series.
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: SungHuai Wang <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add initial gfxhub 11.5 support.
Signed-off-by: benl <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add to IP discovery table.
Signed-off-by: Prike Liang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add initial implementation for mmhub 3.3.0.
v2: squash in client id fix (Alex)
Signed-off-by: Lang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add new headers.
v2: updates (Alex)
Signed-off-by: Lang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add to IP discovery table.
Signed-off-by: Prike Liang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add to IP discovery table.
Signed-off-by: Lang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add scheduler and kiq firmware support for gc_11_5_0.
Signed-off-by: Aaron Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add imu firmware support for gc_11_5_0.
Signed-off-by: Aaron Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable KFD for GC 11.5.0.
Signed-off-by: Lang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize golden setting for gc_11_5_0.
v2: squash in latest golden updates (Alex)
v3: squash in checkpatch fix (Alex)
Signed-off-by: Aaron Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initalize gfx 11.5.0 and set gfx hw configuration.
Signed-off-by: Prike Liang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Initialize vram attribute and VMHUB for GC 11.5.0.
Signed-off-by: Prike Liang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add gc_11_5_0 headers.
v2: updates (Alex)
Signed-off-by: Lang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|