aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2023-11-28Revert "drm/bridge: panel: Check device dependency before managing device link"Linus Walleij1-18/+9
This reverts commit 39d5b6a64ace77d0c11c398d272218df5f939abb. This patch was causing build errors by using an unexported function from the device core, which Greg questions the saneness in exporting. Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij <[email protected]> Acked-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-25drm/bridge: panel: Check device dependency before managing device linkLiu Ying1-9/+18
Some panel devices already depend on DRM device, like the panel in arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts, because DRM device is the ancestor of those panel devices. device_link_add() would fail by returning a NULL pointer for those panel devices because of the existing dependency. So, check the dependency by calling device_is_dependent() before adding or deleting device link between panel device and DRM device so that the link is managed only for independent panel devices. Fixes: 887878014534 ("drm/bridge: panel: Fix device link for DRM_BRIDGE_ATTACH_NO_CONNECTOR") Fixes: 199cf07ebd2b ("drm/bridge: panel: Add a device link between drm device and panel device") Reported-by: Linus Walleij <[email protected]> Closes: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Tested-by: Linus Walleij <[email protected]> Signed-off-by: Liu Ying <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-24Merge tag 'drm-intel-fixes-2023-11-23' of ↵Dave Airlie3-22/+9
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.7-rc3: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-24Merge tag 'drm-misc-fixes-2023-11-23' of ↵Dave Airlie6-22/+91
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v6.7-rc3: - Panel fixes for innolux and auo,b101uan08.3 panel. - Fix ivpu MMIO reset. - AST fix on connetor disconnection. - nouveau gsp fix. - rockchip color fix. - Fix Himax83102-j02 timings. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-24Merge tag 'drm-msm-fixes-2023-11-21' of ↵Dave Airlie6-10/+16
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.7-rc3: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com
2023-11-21nouveau/gsp: allocate enough space for all channel ids.Dave Airlie1-1/+1
This probably isn't the ideal fix, but we ended up using chids sparsely, and lots of things rely on indexing into the full range, so just allocate the full range up front. The GSP code fixes 8 channels into a userd page, but we end up using a single userd page per channel so end up sparsely using the range. Fixes a few crashes seen with multiple channels. Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277 Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-21drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBPCong Yang1-4/+4
The refresh reported by modetest is 60.46Hz, and the actual measurement is 60.01Hz, which is outside the expected tolerance. Adjust hporch and pixel clock to fix it. After repair, modetest and actual measurement were all 60.01Hz. Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime /DSI CLK. Assume that the DSI controller could not make the mode that we requested(presumably it's PLL couldn't generate the exact pixel clock?). If you use a different DSI controller, you may need to readjust these parameters. Now this panel looks like it's only used by me on the MTK platform, so let's change this set of parameters. Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by: Cong Yang <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com
2023-11-21drm/ast: Disconnect BMC if physical connector is connectedThomas Zimmermann2-8/+67
Many user-space compositors fail with mode setting if a CRTC has more than one connected connector. This is the case with the BMC on Aspeed systems. Work around this problem by setting the BMC's connector status to disconnected when the physical connector has a display attached. This way compositors will only see one connected connector at a time; either the physical one or the BMC. Suggested-by: Jocelyn Falempe <[email protected]> Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector") Signed-off-by: Thomas Zimmermann <[email protected]> Cc: <[email protected]> # v6.6+ Reviewed-by: Jocelyn Falempe <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-20drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP fullJonas Karlman1-3/+11
Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328 and RK3399 result in wrong colors being displayed. The issue can be observed using modetest: modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24 modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24 Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP full framework (IP version 3.x) compared to VOP little framework (2.x). Fix colors by applying different rb swap for VOP full framework (3.x) and VOP little framework (2.x) similar to vendor 4.4 kernel. Fixes: 85a359f25388 ("drm/rockchip: Add BGR formats to VOP") Signed-off-by: Jonas Karlman <[email protected]> Tested-by: Diederik de Haas <[email protected]> Reviewed-by: Christopher Obbard <[email protected]> Tested-by: Christopher Obbard <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-20drm/i915: do not clean GT table on error pathAndrzej Hajda2-14/+1
The only task of intel_gt_release_all is to zero gt table. Calling it on error path prevents intel_gt_driver_late_release_all (called from i915_driver_late_release) to cleanup GTs, causing leakage. After i915_driver_late_release GT array is not used anymore so it does not need cleaning at all. Sample leak report: BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown() ... Object 0xffff888113420040 @offset=64 Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454 kmem_cache_alloc+0x25b/0x270 __i915_request_create+0x75/0x610 [i915] i915_request_create+0x109/0x290 [i915] __engines_record_defaults+0xca/0x440 [i915] intel_gt_init+0x275/0x430 [i915] i915_gem_init+0x135/0x2c0 [i915] i915_driver_probe+0x8d1/0xdc0 [i915] v2: removed whole intel_gt_release_all Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489 Fixes: bec68cc9ea42 ("drm/i915: Prepare for multiple GTs") Signed-off-by: Andrzej Hajda <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Reviewed-by: Nirmoy Das <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e899505533852bf1da133f2f4c9a9655ff77f7e5) Signed-off-by: Jani Nikula <[email protected]>
2023-11-20drm/i915/dp_mst: Fix race between connector registration and setupImre Deak1-8/+8
After drm_connector_init() is called the connector is visible to the rest of the kernel via the drm_mode_config::connector_list. Make sure that the DSC AUX device and capabilities are setup by that time. Another race condition is adding the connector to the connector list before drm_connector_helper_add() sets the connector helper functions. That's an unrelated issue, for which the fix is for a follow-up. One solution would be adding the connector to the connector list only during its registration in drm_connector_register(). Cc: Stanislav Lisovskiy <[email protected]> Cc: Ville Syrjälä <[email protected]> Fixes: 808b43fa7e56 ("drm/i915/dp_mst: Set connector DSC capabilities and decompression AUX") Reviewed-by: Stanislav Lisovskiy <[email protected]> Signed-off-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 560ea72c76eb6d0c59f77580414e64cc09f1093d) Signed-off-by: Jani Nikula <[email protected]>
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 timingsMarek Vasut1-6/+6
The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 bus flagsMarek Vasut1-0/+1
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-17drm/msm: remove unnecessary NULL checkDan Carpenter1-2/+1
This NULL check was required when it was added, but we shuffled the code around and now it's not. The inconsistent NULL checking triggers a Smatch warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:847 mdp5_init() warn: variable dereferenced before check 'mdp5_kms' (see line 782) Fixes: 1f50db2f3e1e ("drm/msm/mdp5: move resource allocation to the _probe function") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Uwe Kleine-König <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/562559/ Link: https://lore.kernel.org/r/ZSj+6/J6YsoSpLak@kadam Signed-off-by: Abhinav Kumar <[email protected]>
2023-11-17Merge tag 'drm-fixes-2023-11-17' of git://anongit.freedesktop.org/drm/drmLinus Torvalds31-95/+182
Pull drm fixes from Daniel Vetter: "This is a 'blast from the bast' fixes pull, because it contains a bunch of AGP fixes for amdgpu. Otherwise nothing out of the ordinary. Next week is back to Dave unless he's knocked out by some conference bug. - amdgpu: fixes all over, including a set of AGP fixes - nouvea: GSP + other bugfixes - ivpu build fix - lenovo legion go panel orientation quirk" * tag 'drm-fixes-2023-11-17' of git://anongit.freedesktop.org/drm/drm: (30 commits) drm/amdgpu/gmc9: disable AGP aperture drm/amdgpu/gmc10: disable AGP aperture drm/amdgpu/gmc11: disable AGP aperture drm/amdgpu: add a module parameter to control the AGP aperture drm/amdgpu/gmc11: fix logic typo in AGP check drm/amd/display: Fix encoder disable logic drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox drm/amdgpu: add and populate the port num into xgmi topology info drm/amd/display: Negate IPS allow and commit bits drm/amd/pm: Don't send unload message for reset drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.c drm/amd/display: Clear dpcd_sink_ext_caps if not set drm/amd/display: Enable fast plane updates on DCN3.2 and above drm/amd/display: fix NULL dereference drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer() drm/amd/display: Add null checks for 8K60 lightup drm/amd/pm: Fill pcie error counters for gpu v1_4 drm/amd/pm: Update metric table for smu v13_0_6 drm/amdgpu: correct chunk_ptr to a pointer to chunk. drm/amd/display: Fix DSC not Enabled on Direct MST Sink ...
2023-11-17drm/panel: auo,b101uan08.3: Fine tune the panel power sequenceXuxin Xiong1-0/+1
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel") Signed-off-by: Xuxin Xiong <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
2023-11-17Merge tag 'amd-drm-fixes-6.7-2023-11-17' of ↵Daniel Vetter26-84/+160
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.7-2023-11-17: amdgpu: - DMCUB fixes - SR-IOV fix - GMC9 fix - Documentation fix - DSC MST fix - CS chunk parsing fix - SMU13.0.6 fixes - 8K tiled display fix - Fix potential NULL pointer dereferences - Cursor lag fix - Backlight fix - DCN s0ix fix - XGMI fix - DCN encoder disable logic fix - AGP aperture fixes Signed-off-by: Daniel Vetter <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-17drm/amdgpu/gmc9: disable AGP apertureAlex Deucher1-1/+1
We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Reviewed-by: Yang Wang <[email protected]> (v1) Acked-by: Christian König <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Mario Limonciello <[email protected]> # PHX & Navi33 Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu/gmc10: disable AGP apertureAlex Deucher1-1/+1
We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Reviewed-by: Yang Wang <[email protected]> (v1) Acked-by: Christian König <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Mario Limonciello <[email protected]> # PHX & Navi33 Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu/gmc11: disable AGP apertureAlex Deucher1-1/+1
We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Reviewed-by: Yang Wang <[email protected]> (v1) Acked-by: Christian König <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Mario Limonciello <[email protected]> # PHX & Navi33 Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu: add a module parameter to control the AGP apertureAlex Deucher5-3/+15
Add a module parameter to control the AGP aperture. The AGP aperture is an aperture in the GPU's internal address space which provides direct non-paged access to the platform address space. This access is non-snooped so only uncached memory can be accessed. Add a knob so that we can toggle this for debugging. Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Acked-by: Christian König <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Mario Limonciello <[email protected]> # PHX & Navi33 Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu/gmc11: fix logic typo in AGP checkAlex Deucher1-1/+1
Should be && rather than ||. Fixes: b2e1cbe6281f ("drm/amdgpu/gmc11: disable AGP on GC 11.5") Acked-by: Christian König <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Tested-by: Mario Limonciello <[email protected]> # PHX & Navi33 Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Fix encoder disable logicNicholas Susanto1-6/+4
[WHY] DENTIST hangs when OTG is off and encoder is on. We were not disabling the encoder properly when switching from extended mode to external monitor only. [HOW] Disable the encoder using an existing enable/disable fifo helper instead of enc35_stream_encoder_enable. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Nicholas Susanto <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Change the DMCUB mailbox memory location from FB to inboxLewis Huang3-22/+45
[WHY] Flush command sent to DMCUB spends more time for execution on a dGPU than on an APU. This causes cursor lag when using high refresh rate mouses. [HOW] 1. Change the DMCUB mailbox memory location from FB to inbox. 2. Only change windows memory to inbox. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Lewis Huang <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu: add and populate the port num into xgmi topology infoShiwu Zhang2-0/+6
The port num info is firstly introduced with 20.00.01.13 xgmi ta and make them as part of topology info. Signed-off-by: Shiwu Zhang <[email protected]> Reviewed-by: Le Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Negate IPS allow and commit bitsDuncan Ma3-16/+16
[WHY] On s0i3, IPS mask isn't saved and restored. It is reset to zero on exit. If it is cleared unexpectedly, driver will proceed operations while DCN is in IPS2 and cause a hang. [HOW] Negate the bit logic. Default value of zero indicates it is still in IPS2. Driver must poll for the bit to assert. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Charlene Liu <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Duncan Ma <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/pm: Don't send unload message for resetLijo Lazar1-1/+1
No need to notify about unload during reset. Also remove the FW version check. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Yang Wang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.cYang Wang1-1/+1
fix ras err_data null pointer issue in amdgpu_ras.c Fixes: 8cc0f5669eb6 ("drm/amdgpu: Support multiple error query modes") Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Clear dpcd_sink_ext_caps if not setPaul Hsieh2-0/+4
[WHY] Some eDP panels' ext caps don't set initial values and the value of dpcd_addr (0x317) is random. It means that sometimes the eDP can be OLED, miniLED and etc, and cause incorrect backlight control interface. [HOW] Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc) Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Anthony Koo <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Paul Hsieh <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Enable fast plane updates on DCN3.2 and aboveTianci Yin1-4/+4
[WHY] When cursor moves across screen boarder, lag cursor observed, since subvp settings need to sync up with vblank that causes cursor updates being delayed. [HOW] Enable fast plane updates on DCN3.2 to fix it. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Aurabindo Pillai <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Tianci Yin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: fix NULL dereferenceJosé Pekkarinen1-4/+1
The following patch will fix a minor issue where a debug message is referencing an struct that has just being checked whether is null or not. This has been noticed by using coccinelle, in the following output: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:540:25-29: ERROR: aconnector is NULL but dereferenced. Fixes: 5d72e247e58c ("drm/amd/display: switch DC over to the new DRM logging macros") Signed-off-by: José Pekkarinen <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()Mario Limonciello1-0/+3
When ddc_service_construct() is called, it explicitly checks both the link type and whether there is something on the link which will dictate whether the pin is marked as hw_supported. If the pin isn't set or the link is not set (such as from unloading/reloading amdgpu in an IGT test) then fail the amdgpu_dm_i2c_xfer() call. Cc: [email protected] Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1") Link: https://github.com/fwupd/fwupd/issues/6327 Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Add null checks for 8K60 lightupMuhammad Ahmed2-1/+4
[WHY & HOW] Add some null checks to fix an issue where 8k60 tiled display fails to light up. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Charlene Liu <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Muhammad Ahmed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/pm: Fill pcie error counters for gpu v1_4Asad Kamal1-0/+8
Fill PCIE error counters & instantaneous bandwidth in gpu metrics v1_4 for smu v_13_0_6 Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Le Ma <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/pm: Update metric table for smu v13_0_6Asad Kamal1-1/+9
Update pmfw metric table to include pcie instantaneous bandwidth & pcie error counters Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Le Ma <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu: correct chunk_ptr to a pointer to chunk.YuanShang1-1/+1
The variable "chunk_ptr" should be a pointer pointing to a struct drm_amdgpu_cs_chunk instead of to a pointer of that. Signed-off-by: YuanShang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Fix DSC not Enabled on Direct MST SinkFangzhi Zuo1-15/+14
[WHY & HOW] For the scenario when a dsc capable MST sink device is directly connected, it needs to use max dsc compression as the link bw constraint. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Roman Li <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu: Address member 'ring' not described in 'amdgpu_ vce, ↵Srinivasan Shanmugam2-0/+2
uvd_entity_init()' Fixes the following: drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:237: warning: Function parameter or member 'ring' not described in 'amdgpu_vce_entity_init' drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:405: warning: Function parameter or member 'ring' not described in 'amdgpu_uvd_entity_init' Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Cc: "Pan, Xinhui" <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu: finalizing mem_partitions at the end of GMC v9 sw_finiLe Ma1-2/+3
The valid num_mem_partitions is required during ttm pool fini, thus move the cleanup at the end of the function. Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amdgpu: Do not program VF copy regs in mmhub v1.8 under SRIOV (v2)Victor Lu1-3/+3
MC_VM_AGP_* registers should not be programmed by guest driver. v2: move early return outside of loop Signed-off-by: Victor Lu <[email protected]> Reviewed-by: Samir Dhume <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-17drm/amd/display: Guard against invalid RPTR/WPTR being setNicholas Kazlauskas1-3/+15
[WHY] HW can return invalid values on register read, guard against these being set and causing us to access memory out of range and page fault. [HOW] Guard at sync_inbox1 and guard at pushing commands. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Hansen Dsouza <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-16drm/msm/dp: attach the DP subconnector propertyDmitry Baryshkov1-0/+3
While developing and testing the commit bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") I had the patch [1] in my tree. I haven't noticed that it was a dependency for the commit in question. Mea culpa. Since the patch has not landed yet (and even was not reviewed) and since one of the bridges erroneously uses USB connector type instead of DP, attach the property directly from the MSM DP driver. This fixes the following oops on DP HPD event: drm_object_property_set_value (drivers/gpu/drm/drm_mode_object.c:288) dp_display_process_hpd_high (drivers/gpu/drm/msm/dp/dp_display.c:402) dp_hpd_plug_handle.isra.0 (drivers/gpu/drm/msm/dp/dp_display.c:604) hpd_event_thread (drivers/gpu/drm/msm/dp/dp_display.c:1110) kthread (kernel/kthread.c:388) ret_from_fork (arch/arm64/kernel/entry.S:858) [1] https://patchwork.freedesktop.org/patch/555530/ Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") Reviewed-by: Abhinav Kumar <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Tested-by: Jessica Zhang <[email protected]> # SC7280 Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/564286/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]>
2023-11-16drm/msm/dp: don't touch DP subconnector property in eDP caseAbel Vesa1-5/+10
In case of the eDP connection there is no subconnetor and as such no subconnector property. Put drm_dp_set_subconnector_property() calls under the !is_edp condition. Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Tested-by: Jessica Zhang <[email protected]> # SC7280 Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/564284/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]>
2023-11-16drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalogBjorn Andersson1-0/+1
During USB transfers on the SC8280XP __arm_smmu_tlb_sync() is seen to typically take 1-2ms to complete. As expected this results in poor performance, something that has been mitigated by proposing running the iommu in non-strict mode (boot with iommu.strict=0). This turns out to be related to the SAFE logic, and programming the QOS SAFE values in the DPU (per suggestion from Rob and Doug) reduces the TLB sync time to below 10us, which means significant less time spent with interrupts disabled and a significant boost in throughput. Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP") Cc: [email protected] Suggested-by: Doug Anderson <[email protected]> Suggested-by: Rob Clark <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Tested-by: Johan Hovold <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/565094/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]>
2023-11-16drm/msm: remove exra drm_kms_helper_poll_init() callDmitry Baryshkov1-2/+0
It seems during rebases I have left a call to drm_kms_helper_poll_init() which is not guarded by the (priv->kms_init) check. This leads to the crash for the boards which don't have KMS output. Drop this call, as there is a correctly guarded one next to the one being removed. Fixes: 506efcba3129 ("drm/msm: carve out KMS code from msm_drv.c") Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/566299/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]>
2023-11-16drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphyJonathan Marek1-1/+1
Use the same value as the downstream driver. This change is needed for CPHY mode to work correctly. Fixes: 8b034e677111 ("drm/msm/dsi: add support for DSI-PHY on SM8550") Signed-off-by: Jonathan Marek <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/566987/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]>
2023-11-15nouveau: don't fail driver load if no display hw present.Dave Airlie1-0/+5
If we get back ENODEV don't fail load. There are nvidia devices that don't have display blocks and the driver should work on those. Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270 Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-15drm: panel-orientation-quirks: Add quirk for Lenovo Legion GoBrenton Simpson1-0/+6
The Legion Go has a 2560x1600 portrait screen, with the native "up" facing the right controller (90° CW from the rest of the device). Signed-off-by: Brenton Simpson <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-11-14nouveau: use an rwlock for the event lock.Dave Airlie2-8/+8
This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: Dave Airlie <[email protected]> Tested-by: Danilo Krummrich <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-11-14nouveau/gsp/r535: Fix a NULL vs error pointer bugDan Carpenter1-2/+2
The r535_gsp_cmdq_get() function returns error pointers but this code checks for NULL. Also we need to propagate the error pointer back to the callers in r535_gsp_rpc_get(). Returning NULL will lead to a NULL pointer dereference. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.