aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2022-10-10drm/amd/display: Add a helper to map ODM/MPC/Multi-Plane resourcesJun Lei5-2/+61
[Why & How] Add a helper to map ODM/MPC/Multi-Plane resources from DC Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: increase hardware status wait timeVladimir Stempen2-3/+3
[Why] Diagnostics reports exceptions generated when timeout waiting for DISPCLK frequency divider change expires when testing ODM4to1. Diagnostics reports exceptions generated when timeout waiting for OTG busy status expires when disabling OTG during ODM4to1 test. [How] Increase HW status waiting time for DISPCLK frequency divider change and OTG busy status when disable OTG. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Do not trigger timing sync for phantom pipesAurabindo Pillai1-3/+23
[Why&How] Doing timing sync seqence for phantom pipes will not go through since they are not fully programmed like normal pipes. Skip the sequence on such pipes Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Use correct pixel clock to program DTBCLK DTO'sDillon Varone1-1/+1
[Why?] Currently phy_pix_clk is used to program DTO's which is incorrect. [How?] Use the timing pixel clock to program DTO's correctly. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: do not compare integers of different widthsJosip Pavic1-2/+1
[Why & How] Increase width of some variables to avoid comparing integers of different widths Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: zeromem mypipe heap struct before using itMartin Leung1-0/+2
[Why & How] bug was caused when moving variable from stack to heap because it was reusable and garbage was left over, so we need to zero mem Fixes: 7acc487ab57e ("drm/amd/display: reduce stack size in dcn32 dml (v2)") Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-10drm/amd/display: properly configure DCFCLK when enable/disable FreesyncVladimir Stempen2-1/+13
[Why] Bandwidth validation is using Freesync parameters from previous Freesync state. Bandwidth validation ignores DCFCLK calculated after Freesync parameters are configured [How] Set Freesync bandwidth parameters to its default state before running bandwidth validation. Take DCFCLK calculated after Freesync bandwidth parameters are assigned and bandwidth is recalculated. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10Revert "drm/amd/display: skip commit minimal transition state"Dillon Varone1-20/+0
This reverts commit e4e481e4d838f30985dd46d43ed195110ed265f5. [Why & How] The reverted commit creates memory leak and causes issue upon driver install. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Update PMFW z-state interface for DCN314Nicholas Kazlauskas2-9/+5
[Why] Request from PMFW to change the messaging format to specify whether we support z-state via individual bits. [How] Update the args we pass in the support message. Fixes: d5c6909e7460 ("drm/amd/display: Add DCN314 clock manager") Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0
2022-10-10drm/amd/display: explicitly disable psr_feature_enable appropriatelyShirish S1-2/+6
[Why] If psr_feature_enable is set to true by default, it continues to be enabled for non capable links. [How] explicitly disable the feature on links that are not capable of the same. Fixes: 8c322309e48e9 ("drm/amd/display: Enable PSR") Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.15+
2022-10-10Merge tag 'hyperv-next-signed-20221009' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Remove unnecessary delay while probing for VMBus (Stanislav Kinsburskiy) - Optimize vmbus_on_event (Saurabh Sengar) - Fix a race in Hyper-V DRM driver (Saurabh Sengar) - Miscellaneous clean-up patches from various people * tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Replace kmap() with kmap_local_page() drm/hyperv: Add ratelimit on error message hyperv: simplify and rename generate_guest_id Drivers: hv: vmbus: Split memcpy of flex-array scsi: storvsc: remove an extraneous "to" in a comment Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability Drivers: hv: vmbus: Fix kernel-doc drm/hyperv: Don't overwrite dirt_needed value set by host Drivers: hv: vmbus: Optimize vmbus_on_event
2022-10-10Merge tag 'iommu-updates-v6.1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - remove the bus_set_iommu() interface which became unnecesary because of IOMMU per-device probing - make the dma-iommu.h header private - Intel VT-d changes from Lu Baolu: - Decouple PASID and PRI from SVA - Add ESRTPS & ESIRTPS capability check - Cleanups - Apple DART support for the M1 Pro/MAX SOCs - support for AMD IOMMUv2 page-tables for the DMA-API layer. The v2 page-tables are compatible with the x86 CPU page-tables. Using them for DMA-API prepares support for hardware-assisted IOMMU virtualization - support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver - some smaller fixes and cleanups * tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits) iommu/vt-d: Avoid unnecessary global DMA cache invalidation iommu/vt-d: Avoid unnecessary global IRTE cache invalidation iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support iommu/vt-d: Remove pasid_set_eafe() iommu/vt-d: Decouple PASID & PRI enabling from SVA iommu/vt-d: Remove unnecessary SVA data accesses in page fault path dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names iommu: dart: Support t6000 variant iommu/io-pgtable-dart: Add DART PTE support for t6000 iommu/io-pgtable: Add DART subpage protection support iommu/io-pgtable: Move Apple DART support to its own file iommu/mediatek: Add support for MT6795 Helio X10 M4Us iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173 dt-bindings: mediatek: Add bindings for MT6795 M4U iommu/iova: Fix module config properly iommu/amd: Fix sparse warning iommu/amd: Remove outdated comment iommu/amd: Free domain ID after domain_flush_pages iommu/amd: Free domain id in error path iommu/virtio: Fix compile error with viommu_capable() ...
2022-10-10Merge tag 'kbuild-v6.1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove potentially incomplete targets when Kbuid is interrupted by SIGINT etc in case GNU Make may miss to do that when stderr is piped to another program. - Rewrite the single target build so it works more correctly. - Fix rpm-pkg builds with V=1. - List top-level subdirectories in ./Kbuild. - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms. - Avoid two different modules in lib/zstd/ having shared code, which potentially causes building the common code as build-in and modular back-and-forth. - Unify two modpost invocations to optimize the build process. - Remove head-y syntax in favor of linker scripts for placing particular sections in the head of vmlinux. - Bump the minimal GNU Make version to 3.82. - Clean up misc Makefiles and scripts. * tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) docs: bump minimal GNU Make version to 3.82 ia64: simplify esi object addition in Makefile Revert "kbuild: Check if linker supports the -X option" kbuild: rebuild .vmlinux.export.o when its prerequisite is updated kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o zstd: Fixing mixed module-builtin objects kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols kallsyms: take the input file instead of reading stdin kallsyms: drop duplicated ignore patterns from kallsyms.c kbuild: reuse mksysmap output for kallsyms mksysmap: update comment about __crc_* kbuild: remove head-y syntax kbuild: use obj-y instead extra-y for objects placed at the head kbuild: hide error checker logs for V=1 builds kbuild: re-run modpost when it is updated kbuild: unify two modpost invocations kbuild: move vmlinux.o rule to the top Makefile kbuild: move .vmlinux.objs rule to Makefile.modpost kbuild: list sub-directories in ./Kbuild Makefile.compiler: replace cc-ifversion with compiler-specific macros ...
2022-10-10drm/i915/display: handle migration for dptMatthew Auld1-18/+33
On platforms like DG2, it looks like the dpt path here is missing the migrate-to-lmem step on discrete platforms. v2: - Move the vma_pin() under the for_i915_gem_ww(), otherwise the object can be moved after dropping the lock and then doing the pin. Fixes: 33e7a975103c ("drm/i915/xelpd: First stab at DPT support") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Jianshui Yu <jianshui.yu@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221004131916.233474-2-matthew.auld@intel.com (cherry picked from commit 5769f64ff09aab23a9045fa13b464fb5070d3fb2) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-10drm/i915/guc: Fix revocation of non-persistent contextsTvrtko Ursulin4-25/+17
Patch which added graceful exit for non-persistent contexts missed the fact it is not enough to set the exiting flag on a context and let the backend handle it from there. GuC backend cannot handle it because it runs independently in the firmware and driver might not see the requests ever again. Patch also missed the fact some usages of intel_context_is_banned in the GuC backend needed replacing with newly introduced intel_context_is_schedulable. Fix the first issue by calling into backend revoke when we know this is the last chance to do it. Fix the second issue by replacing intel_context_is_banned with intel_context_is_schedulable, which should always be safe since latter is a superset of the former. v2: * Just call ce->ops->revoke unconditionally. (Andrzej) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 45c64ecf97ee ("drm/i915: Improve user experience and driver robustness under SIGINT or similar") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: <stable@vger.kernel.org> # v6.0+ Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221003121630.694249-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 0add082cebac8555ee3972ba768ae5c01db7a498) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-07Merge tag 'driver-core-6.1-rc1' of ↵Linus Torvalds8-12/+115
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core and debug printk changes for 6.1-rc1. Included in here is: - dynamic debug updates for the core and the drm subsystem. The drm changes have all been acked by the relevant maintainers - kernfs fixes for syzbot reported problems - kernfs refactors and updates for cgroup requirements - magic number cleanups and removals from the kernel tree (they were not being used and they really did not actually do anything) - other tiny cleanups All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits) docs: filesystems: sysfs: Make text and code for ->show() consistent Documentation: NBD_REQUEST_MAGIC isn't a magic number a.out: restore CMAGIC device property: Add const qualifier to device_get_match_data() parameter drm_print: add _ddebug descriptor to drm_*dbg prototypes drm_print: prefer bare printk KERN_DEBUG on generic fn drm_print: optimize drm_debug_enabled for jump-label drm-print: add drm_dbg_driver to improve namespace symmetry drm-print.h: include dyndbg header drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro drm_print: interpose drm_*dbg with forwarding macros drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers. drm_print: condense enum drm_debug_category debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs() Documentation: ENI155_MAGIC isn't a magic number Documentation: NBD_REPLY_MAGIC isn't a magic number nbd: remove define-only NBD_MAGIC, previously magic number Documentation: FW_HEADER_MAGIC isn't a magic number Documentation: EEPROM_MAGIC_VALUE isn't a magic number ...
2022-10-07Merge tag 'drm-next-2022-10-07-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+2
Pull drm fix from Dave Airlie: "This reverts the patch I found with rough bisection to instability around fences and the oops I got from netconsole. sched: - revert patch causing oopses" * tag 'drm-next-2022-10-07-1' of git://anongit.freedesktop.org/drm/drm: Revert "drm/sched: Use parent fence instead of finished"
2022-10-07Revert "drm/sched: Use parent fence instead of finished"Dave Airlie1-2/+2
This reverts commit e4dc45b1848bc6bcac31eb1b4ccdd7f6718b3c86. This is causing instability on Linus' desktop, and I'm seeing oops with VK CTS runs. netconsole got me the following oops: [ 1234.778760] BUG: kernel NULL pointer dereference, address: 0000000000000088 [ 1234.778782] #PF: supervisor read access in kernel mode [ 1234.778787] #PF: error_code(0x0000) - not-present page [ 1234.778791] PGD 0 P4D 0 [ 1234.778798] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1234.778803] CPU: 7 PID: 805 Comm: systemd-journal Not tainted 6.0.0+ #2 [ 1234.778809] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 [ 1234.778813] RIP: 0010:drm_sched_job_done.isra.0+0xc/0x140 [gpu_sched] [ 1234.778828] Code: aa 0f 1d ce e9 57 ff ff ff 48 89 d7 e8 9d 8f 3f ce e9 4a ff ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 53 48 89 fb <48> 8b af 88 00 00 00 f0 ff 8d f0 00 00 00 48 8b 85 80 01 00 00 f0 [ 1234.778834] RSP: 0000:ffffabe680380de0 EFLAGS: 00010087 [ 1234.778839] RAX: ffffffffc04e9230 RBX: 0000000000000000 RCX: 0000000000000018 [ 1234.778897] RDX: 00000ba278e8977a RSI: ffff953fb288b460 RDI: 0000000000000000 [ 1234.778901] RBP: ffff953fb288b598 R08: 00000000000000e0 R09: ffff953fbd98b808 [ 1234.778905] R10: 0000000000000000 R11: ffffabe680380ff8 R12: ffffabe680380e00 [ 1234.778908] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff953fbd9ec458 [ 1234.778912] FS: 00007f35e7008580(0000) GS:ffff95428ebc0000(0000) knlGS:0000000000000000 [ 1234.778916] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1234.778919] CR2: 0000000000000088 CR3: 000000010147c000 CR4: 00000000003506e0 [ 1234.778924] Call Trace: [ 1234.778981] <IRQ> [ 1234.778989] dma_fence_signal_timestamp_locked+0x6a/0xe0 [ 1234.778999] dma_fence_signal+0x2c/0x50 [ 1234.779005] amdgpu_fence_process+0xc8/0x140 [amdgpu] [ 1234.779234] sdma_v3_0_process_trap_irq+0x70/0x80 [amdgpu] [ 1234.779395] amdgpu_irq_dispatch+0xa9/0x1d0 [amdgpu] [ 1234.779609] amdgpu_ih_process+0x80/0x100 [amdgpu] [ 1234.779783] amdgpu_irq_handler+0x1f/0x60 [amdgpu] [ 1234.779940] __handle_irq_event_percpu+0x46/0x190 [ 1234.779946] handle_irq_event+0x34/0x70 [ 1234.779949] handle_edge_irq+0x9f/0x240 [ 1234.779954] __common_interrupt+0x66/0x100 [ 1234.779960] common_interrupt+0xa0/0xc0 [ 1234.779965] </IRQ> [ 1234.779968] <TASK> [ 1234.779971] asm_common_interrupt+0x22/0x40 [ 1234.779976] RIP: 0010:finish_mkwrite_fault+0x22/0x110 [ 1234.779981] Code: 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 41 55 41 54 55 48 89 fd 53 48 8b 07 f6 40 50 08 0f 84 eb 00 00 00 48 8b 45 30 48 8b 18 <48> 89 df e8 66 bd ff ff 48 85 c0 74 0d 48 89 c2 83 e2 01 48 83 ea [ 1234.779985] RSP: 0000:ffffabe680bcfd78 EFLAGS: 00000202 Revert it for now and figure it out later. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-10-06Revert "drm/amdgpu: use dirty framebuffer helper"Hamza Mahfooz1-12/+2
This reverts commit 66f99628eb24409cb8feb5061f78283c8b65f820. Unfortunately, that commit causes performance regressions on non-PSR setups. So, just revert it until FB_DAMAGE_CLIPS support can be added. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554 Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper") Fixes: abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic") Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Correct amdgpu_amdkfd_total_mem_size calculationPhilip Yang1-3/+3
amdkfd_total_mem_size is the size of total GPUs vram plus system memory to estimate page tables memory usage and leave enough VRAM room for page tables allocation. Calculate amdkfd_total_mem_size in amdgpu_amdkfd_device_probe is incorrect because adev->gmc.real_vram_size is still 0 called from amdgpu_device_ip_early_init. Move the calculation to amdgpu_amdkfd_device_init to get the correct VRAM size. Do reverse calculation in amdgpu_amdkfd_device_fini_sw to support hot-unplugging GPUs. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Set vmbo destroy after pt bo is createdPhilip Yang1-1/+4
Under VRAM usage pression, map to GPU may fail to create pt bo and vmbo->shadow_list is not initialized, then ttm_bo_release calling amdgpu_bo_vm_destroy to access vmbo->shadow_list generates below dmesg and NULL pointer access backtrace: Set vmbo destroy callback to amdgpu_bo_vm_destroy only after creating pt bo successfully, otherwise use default callback amdgpu_bo_destroy. amdgpu: amdgpu_vm_bo_update failed amdgpu: update_gpuvm_pte() failed amdgpu: Failed to map bo to gpuvm amdgpu 0000:43:00.0: amdgpu: Failed to map peer:0000:43:00.0 mem_domain:2 BUG: kernel NULL pointer dereference, address: RIP: 0010:amdgpu_bo_vm_destroy+0x4d/0x80 [amdgpu] Call Trace: <TASK> ttm_bo_release+0x207/0x320 [amdttm] amdttm_bo_init_reserved+0x1d6/0x210 [amdttm] amdgpu_bo_create+0x1ba/0x520 [amdgpu] amdgpu_bo_create_vm+0x3a/0x80 [amdgpu] amdgpu_vm_pt_create+0xde/0x270 [amdgpu] amdgpu_vm_ptes_update+0x63b/0x710 [amdgpu] amdgpu_vm_update_range+0x2e7/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x2bd/0x600 [amdgpu] update_gpuvm_pte+0x160/0x420 [amdgpu] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x313/0x1130 [amdgpu] kfd_ioctl_map_memory_to_gpu+0x115/0x390 [amdgpu] kfd_ioctl+0x24a/0x5b0 [amdgpu] Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Fix VRAM BO swap issueArunpravin Paneer Selvam1-5/+12
DRM buddy manager allocates the contiguous memory requests in a single block or multiple blocks. So for the ttm move operation (incase of low vram memory) we should consider all the blocks to compute the total memory size which compared with the struct ttm_resource num_pages in order to verify that the blocks are contiguous for the eviction process. v2: Added a Fixes tag v3: Rewrite the code to save a bit of calculations and variables (Christian) Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu") Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Remove unused struct i2c_id_config_accessYuan Can1-7/+0
After commit 5a8132b9f606 ("drm/amd/display: remove dead dc vbios code"), no one use struct i2c_id_config_access, so remove it. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Removed unused variable 'sdp_stream_enable'Dong Chenchen1-10/+6
Kernel test robot throws below warning -> drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c: In function 'dcn31_hpo_dp_stream_enc_update_dp_info_packets': drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:439:14: warning: variable 'sdp_stream_enable' set but not used [-Wunused-but-set-variable] 439 | bool sdp_stream_enable = false; Removed unused variable 'sdp_stream_enable'. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: clean up dcn32_fpu.c kernel-docRandy Dunlap1-67/+49
Rectify multiple kernel-doc warnings in dcn32_fpu.c. E.g.: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Finds dummy_latency_index when MCLK switching using firmware based drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:484: warning: Function parameter or member 'phantom_stream' not described in 'dcn32_set_phantom_stream_timing' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'dc' not described in 'dcn32_assign_subvp_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'context' not described in 'dcn32_assign_subvp_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'index' not described in 'dcn32_assign_subvp_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'dc' not described in 'dcn32_update_bw_bounding_box_fpu' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'bw_params' not described in 'dcn32_update_bw_bounding_box_fpu' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: expecting prototype for dcn32_update_bw_bounding_box(). Prototype was for dcn32_update_bw_bounding_box_fpu() instead Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: George Shen <george.shen@amd.com> Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Nevenko Stupar <Nevenko.Stupar@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix vblank refcount in vrr transitionYunxiang Li1-29/+26
manage_dm_interrupts disable/enable vblank using drm_crtc_vblank_off/on which causes drm_crtc_vblank_get in vrr_transition to fail, and later when drm_crtc_vblank_put is called the refcount on vblank will be messed up. Therefore move the call to after manage_dm_interrupts. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1247 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1380 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-06drm/amd/display: Enable dpia support for dcn314Roman Li1-1/+2
[Why] DCN 3.1.4 supports DPIA. [How] - Set dpia_supported flag for dcn314 in dmub_hw_init() - Remove comment that becomes irrelevant after this change. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amdgpu: Enable F32_WPTR_POLL_ENABLE in mqdRuili Ji2-2/+4
This patch is to fix the SDMA user queue doorbell missing issue on SDMA 6.0. F32_WPTR_POLL_ENABLE has to be set if doorbell mode is used. Otherwise ringing SDMA user queue doorbell can't wake up system from gfxoff. Signed-off-by: Ruili Ji <ruiliji2@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amdgpu/sdma: add missing release_firmware() in amdgpu_sdma_init_microcode()Yang Yingliang1-3/+5
In some error path in amdgpu_sdma_init_microcode(), release_firmware() is not called, the memory allocated in request_firmware() will be leaked, calling amdgpu_sdma_destroy_inst_ctx() which calls release_firmware() to avoid memory leak. Fixes: 15aa13056d11da ("drm/amdgpu: add function to init SDMA microcode") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: clean up one inconsistent indentingYang Li1-1/+1
clean up one inconsistent indenting Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2321 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: clean up one inconsistent indentingYang Li1-1/+1
clean up one inconsistent indenting Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2238 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Minor code style changeRodrigo Siqueira1-7/+2
This commit adds some minor code style changes just to reduce the merge conflicts we have when we upstream some of the VBA code. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: update DSC for DCN32Rodrigo Siqueira1-6/+4
Update DSC checks in the DCN32 VBA. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Disconnect DSC for unused pipes during ODM transitionRodrigo Siqueira1-8/+11
[Why] During transition from ODM combine to ODM bypass, if DSC is enabled need to disconnect the DSC mux for pipes no longer in use. [How] During ODM update, detect pipes with DSC that are no longer being used for new state and call new DSC interface to disconnect. Add new DSC interface to disconnect from pipe Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: unblock mcm_lutsMartin Leung1-3/+2
why and how: needed to fix bad assumption for enable mcm_luts Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: 3.2.206Aric Cyr1-1/+1
This version brings along the following: - ILR improvements - PSR fixes - DCN315 fixes - DCN32 fixes - ODM fixes - DSC fixes - SubVP fixes Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Enable 2 to 1 ODM policy if supportedRodrigo Siqueira1-0/+4
If the current configuration supports 2 to 1 ODM policy, let's also enable the windowed MPO feature. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amd/display: Add PState change high hook for DCN32Rodrigo Siqueira1-0/+1
For some reason, we missed the PState check for DCN32 which may cause issues for clock transition. This commit add that required hook. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Enable VCN PG on GC11_0_1Sonny Jiang1-0/+1
Enable VCN PG on GC11_0_1 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amd/display: Add missing mask sh for SYM32_TP_SQ_PULSE registerWenjing Liu1-0/+1
There is a missing register mask in dcn32 causing the hardware programming is not executed when programming SQ_num test pattern for DP2. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Add missing SDP registers to DCN32 reglistGeorge Shen1-0/+2
[Why] Certain features require the additional DP SDP configuration registers DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly. The DCN32 DIO stream encoder reglist is currently missing these two registers. [How] Add the missing registers to the DCN32 DIO stream encoder reglist. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix disable DSC logic in the DIO codeEric Bernstein1-1/+1
[Why] In DIO stream encoder, definition of DP_DSC_MODE is changed (only enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as DCN3.1) [How] In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix merging dynamic ODM+MPO configs on DCN32Dillon Varone1-0/+5
[WHY&HOW?] When merging ODM pipes that are using MPO, we must copy the stream_res from the new top pipe to the bottom pipe so that the overlayed plane is not pointing to the wrong stream assets. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Adding missing HDMI ACP SEND registerRodrigo Siqueira1-0/+1
Add HDMI ACP bit field definition for DCN32. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Remove OPTC lock checkRodrigo Siqueira6-16/+0
At some point, we decided to blank HUBP during pixel data blank, and to handle that, we added some OPTC lock checks. Later, we realized that this change caused multiple regression, and we removed it. Nevertheless, we still have some leftovers that might affect some ASIC behavior, and this commit drops those changes to keep the code consistent. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix SubVP control flow in the MPO contextRodrigo Siqueira3-20/+20
SubVP has some issues related to how we allocate and enable it. This commit fixes this behavior by adding the proper check and configuration to the SubVP code path. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Update DCN321 hook that deals with pipe aquireRodrigo Siqueira1-1/+1
DCN provides a hook to check if we can have a new pipe allocation based on some DC constraints. If the current configuration supports the new pipe request, DC updates its context; otherwise, it will keep the same configuration. This behavior is similar across multiple ASICs, and for this reason, we reused DCN20 on DCN321. However, this DCN32x has some peculiarities which require its function to avoid weird pipe split issues. This commit update this issue by using dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of dcn20_acquire_idle_pipe_for_layer. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Drop unused code for DCN32/321Rodrigo Siqueira6-36/+1
Under DCN32/321 we identified some code paths that DC never executes. This commit removes those unused codes to avoid distractions when debugging issues. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: block odd h_total timings from halving pixel rateMartin Leung2-5/+39
why: when dynamic odm was turned on, there is also logic to halve the pixelclk this still turned on when we avoided odm in the case of odd h_total timings how: block the pixel clk mechanism also in the case of odd h_total timings Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix vupdate and vline position calculationAric Cyr1-35/+25
[how] Large deltas for periodic interrupts could result in the interrupt not being programmed properly and thus not firing. [why] Add proper wrap-around support for calculating VUPDATE and VLINE positions. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Powered by cgit, Gruvboxed by Blaster4385.