aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2024-05-22drm/virtio: drop owner assignmentKrzysztof Kozlowski1-1/+0
virtio core already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2024-05-22Merge tag 'drm-misc-next-fixes-2024-05-16' of ↵Dave Airlie11-69/+100
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - VM_BIND fix for nouveau. - Lots of panthor fixes: * Fixes for panthor's heap logical block. * Reset on unrecoverable fault * Fix VM references. * Reset fix. - xlnx compile and doc fixes. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-21drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2Wayne Lin4-6/+4
[Why] Commit: - commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") accidently overwrite the commit - commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2") which cause regression. [How] Recover the original NULL fix and remove the unnecessary input parameter 'state' for drm_dp_add_payload_part2(). Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement") Reported-by: Leon Weiß <[email protected]> Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/ Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Harry Wentland <[email protected]> Acked-by: Jani Nikula <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-05-21drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)Wachowski, Karol1-0/+3
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot: BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags)); Return -EINVAL early if COW mapping is detected. This bug affects all drm drivers using default shmem helpers. It can be reproduced by this simple example: void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset); ptr[0] = 0; Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Cc: Noralf Trønnes <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Rob Herring <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.2+ Signed-off-by: Wachowski, Karol <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-20drm/amdkfd: Let VRAM allocations go to GTT domain on small APUsLang Yu5-13/+23
Small APUs(i.e., consumer, embedded products) usually have a small carveout device memory which can't satisfy most compute workloads memory allocation requirements. We can't even run a Basic MNIST Example with a default 512MB carveout. https://github.com/pytorch/examples/tree/main/mnist. Error Log: "torch.cuda.OutOfMemoryError: HIP out of memory. Tried to allocate 84.00 MiB. GPU 0 has a total capacity of 512.00 MiB of which 0 bytes is free. Of the allocated memory 103.83 MiB is allocated by PyTorch, and 22.17 MiB is reserved by PyTorch but unallocated" Though we can change BIOS settings to enlarge carveout size, which is inflexible and may bring complaint. On the other hand, the memory resource can't be effectively used between host and device. The solution is MI300A approach, i.e., let VRAM allocations go to GTT. Then device and host can flexibly and effectively share memory resource. v2: Report local_mem_size_private as 0. (Felix) Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vmsLang Yu1-1/+2
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used. Two attachments use the same VM, root PD would be locked twice. [ 57.910418] Call Trace: [ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu] [ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu] [ 57.793923] ? idr_get_next_ul+0xbe/0x100 [ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu] [ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu] [ 57.794141] ? process_scheduled_works+0x29c/0x580 [ 57.794147] process_scheduled_works+0x303/0x580 [ 57.794157] ? __pfx_worker_thread+0x10/0x10 [ 57.794160] worker_thread+0x1a2/0x370 [ 57.794165] ? __pfx_worker_thread+0x10/0x10 [ 57.794167] kthread+0x11b/0x150 [ 57.794172] ? __pfx_kthread+0x10/0x10 [ 57.794177] ret_from_fork+0x3d/0x60 [ 57.794181] ? __pfx_kthread+0x10/0x10 [ 57.794184] ret_from_fork_asm+0x1b/0x30 Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-05-20Merge tag 'i2c-for-6.10-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "i2c core removes an argument from the i2c_mux_add_adapter() call to further deprecate class based I2C device instantiation. All users are converted, too. Other that that, Andi collected a number if I2C host driver patches. Those merges have their own description" * tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits) power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter() i2c: mux: Remove class argument from i2c_mux_add_adapter() i2c: synquacer: Fix an error handling path in synquacer_i2c_probe() i2c: acpi: Unbind mux adapters before delete i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() i2c: pxa: use 'time_left' variable with wait_event_timeout() i2c: s3c2410: use 'time_left' variable with wait_event_timeout() i2c: rk3x: use 'time_left' variable with wait_event_timeout() i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout() i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout() i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout() i2c: st: use 'time_left' variable with wait_for_completion_timeout() i2c: omap: use 'time_left' variable with wait_for_completion_timeout() i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout() i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout() i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout() i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout() i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout() ...
2024-05-19drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORTSamuel Holland4-94/+7
Now that all previously-supported architectures select ARCH_HAS_KERNEL_FPU_SUPPORT, this code can depend on that symbol instead of the existing list of architectures. It can also take advantage of the common kernel-mode FPU API and method of adjusting CFLAGS. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Samuel Holland <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Christian König <[email protected]> Cc: Borislav Petkov (AMD) <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nicolas Schier <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Russell King <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: WANG Xuerui <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-05-19drm/amd/display: only use hard-float, not altivec on powerpcMichael Ellerman3-12/+4
The compiler flags enable altivec, but that is not required; hard-float is sufficient for the code to build and function. Drop altivec from the compiler flags and adjust the enable/disable code to only enable FPU use. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Michael Ellerman <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Christian König <[email protected]> Cc: Borislav Petkov (AMD) <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Huacai Chen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nicolas Schier <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Russell King <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: WANG Xuerui <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-05-20drm/bridge: adv7511: Attach next bridge without creating connectorLiu Ying1-1/+2
The connector is created by either this ADV7511 bridge driver or any DRM device driver/previous bridge driver, so this ADV7511 bridge driver should not let the next bridge driver create connector. If the next bridge is a HDMI connector, the next bridge driver would fail to attach bridge from display_connector_attach() without the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag. Add that flag to drm_bridge_attach() function call in adv7511_bridge_attach() to fix the issue. This fixes the issue where the HDMI connector bridge fails to attach to the previous ADV7535 bridge on i.MX8MP EVK platform: [ 2.216442] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /hdmi-connector to encoder None-37: -22 [ 2.220675] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 2.226262] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/i2c@30a30000/hdmi@3d to encoder None-37: -22 [ 2.245204] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@32c00000/dsi@32e60000 to encoder None-37: -22 [ 2.256445] imx-lcdif 32e80000.display-controller: error -EINVAL: Failed to attach bridge for endpoint0 [ 2.265850] imx-lcdif 32e80000.display-controller: error -EINVAL: Cannot connect bridge [ 2.274009] imx-lcdif 32e80000.display-controller: probe with driver imx-lcdif failed with error -22 Fixes: 14b3cdbd0e5b ("drm/bridge: adv7511: make it honour next bridge in DT") Signed-off-by: Liu Ying <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Robert Foss <[email protected]> Acked-by: Sui Jingfeng <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2024-05-20drm/buddy: Fix the warn on's during force mergeArunpravin Paneer Selvam1-3/+3
Move the fallback and block incompatible checks above, so that we dont unnecessarily split the blocks and leaving the unmerged. This resolves the unnecessary warn on's thrown during force_merge call. v2:(Matthew) - Move the fallback and block incompatible checks above the contains check. Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Fixes: 96950929eb23 ("drm/buddy: Implement tracking clear page feature") Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-19Merge tag 'mm-stable-2024-05-17-19-19' of ↵Linus Torvalds21-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: "The usual shower of singleton fixes and minor series all over MM, documented (hopefully adequately) in the respective changelogs. Notable series include: - Lucas Stach has provided some page-mapping cleanup/consolidation/ maintainability work in the series "mm/treewide: Remove pXd_huge() API". - In the series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one test. - In their series "Memory allocation profiling" Kent Overstreet and Suren Baghdasaryan have contributed a means of determining (via /proc/allocinfo) whereabouts in the kernel memory is being allocated: number of calls and amount of memory. - Matthew Wilcox has provided the series "Various significant MM patches" which does a number of rather unrelated things, but in largely similar code sites. - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes Weiner has fixed the page allocator's handling of migratetype requests, with resulting improvements in compaction efficiency. - In the series "make the hugetlb migration strategy consistent" Baolin Wang has fixed a hugetlb migration issue, which should improve hugetlb allocation reliability. - Liu Shixin has hit an I/O meltdown caused by readahead in a memory-tight memcg. Addressed in the series "Fix I/O high when memory almost met memcg limit". - In the series "mm/filemap: optimize folio adding and splitting" Kairui Song has optimized pagecache insertion, yielding ~10% performance improvement in one test. - Baoquan He has cleaned up and consolidated the early zone initialization code in the series "mm/mm_init.c: refactor free_area_init_core()". - Baoquan has also redone some MM initializatio code in the series "mm/init: minor clean up and improvement". - MM helper cleanups from Christoph Hellwig in his series "remove follow_pfn". - More cleanups from Matthew Wilcox in the series "Various page->flags cleanups". - Vlastimil Babka has contributed maintainability improvements in the series "memcg_kmem hooks refactoring". - More folio conversions and cleanups in Matthew Wilcox's series: "Convert huge_zero_page to huge_zero_folio" "khugepaged folio conversions" "Remove page_idle and page_young wrappers" "Use folio APIs in procfs" "Clean up __folio_put()" "Some cleanups for memory-failure" "Remove page_mapping()" "More folio compat code removal" - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb functions to work on folis". - Code consolidation and cleanup work related to GUP's handling of hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2". - Rick Edgecombe has developed some fixes to stack guard gaps in the series "Cover a guard gap corner case". - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series "mm/ksm: fix ksm exec support for prctl". - Baolin Wang has implemented NUMA balancing for multi-size THPs. This is a simple first-cut implementation for now. The series is "support multi-size THP numa balancing". - Cleanups to vma handling helper functions from Matthew Wilcox in the series "Unify vma_address and vma_pgoff_address". - Some selftests maintenance work from Dev Jain in the series "selftests/mm: mremap_test: Optimizations and style fixes". - Improvements to the swapping of multi-size THPs from Ryan Roberts in the series "Swap-out mTHP without splitting". - Kefeng Wang has significantly optimized the handling of arm64's permission page faults in the series "arch/mm/fault: accelerate pagefault when badaccess" "mm: remove arch's private VM_FAULT_BADMAP/BADACCESS" - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it GUP-fast". - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to use struct vm_fault". - selftests build fixes from John Hubbard in the series "Fix selftests/mm build without requiring "make headers"". - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes the initialization code so that migration between different memory types works as intended. - David Hildenbrand has improved follow_pte() and fixed an errant driver in the series "mm: follow_pte() improvements and acrn follow_pte() fixes". - David also did some cleanup work on large folio mapcounts in his series "mm: mapcount for large folios + page_mapcount() cleanups". - Folio conversions in KSM in Alex Shi's series "transfer page to folio in KSM". - Barry Song has added some sysfs stats for monitoring multi-size THP's in the series "mm: add per-order mTHP alloc and swpout counters". - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled and limit checking cleanups". - Matthew Wilcox has been looking at buffer_head code and found the documentation to be lacking. The series is "Improve buffer head documentation". - Multi-size THPs get more work, this time from Lance Yang. His series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes the freeing of these things. - Kemeng Shi has added more userspace-visible writeback instrumentation in the series "Improve visibility of writeback". - Kemeng Shi then sent some maintenance work on top in the series "Fix and cleanups to page-writeback". - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the series "Improve anon_vma scalability for anon VMAs". Intel's test bot reported an improbable 3x improvement in one test. - SeongJae Park adds some DAMON feature work in the series "mm/damon: add a DAMOS filter type for page granularity access recheck" "selftests/damon: add DAMOS quota goal test" - Also some maintenance work in the series "mm/damon/paddr: simplify page level access re-check for pageout" "mm/damon: misc fixes and improvements" - David Hildenbrand has disabled some known-to-fail selftests ni the series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL". - memcg metadata storage optimizations from Shakeel Butt in "memcg: reduce memory consumption by memcg stats". - DAX fixes and maintenance work from Vishal Verma in the series "dax/bus.c: Fixups for dax-bus locking"" * tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits) memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault selftests: cgroup: add tests to verify the zswap writeback path mm: memcg: make alloc_mem_cgroup_per_node_info() return bool mm/damon/core: fix return value from damos_wmark_metric_value mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED selftests: cgroup: remove redundant enabling of memory controller Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT Docs/mm/damon/design: use a list for supported filters Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file selftests/damon: classify tests for functionalities and regressions selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None' selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts selftests/damon/_damon_sysfs: check errors from nr_schemes file reads mm/damon/core: initialize ->esz_bp from damos_quota_init_priv() selftests/damon: add a test for DAMOS quota goal ...
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds7-23/+21
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-17drm/tests/buddy: stop using PAGE_SIZEMatthew Auld1-21/+21
Gives the wrong impression that min page-size has to be tied to the CPU PAGE_SIZE. Signed-off-by: Matthew Auld <[email protected]> Cc: Arunpravin Paneer Selvam <[email protected]> Cc: Christian König <[email protected]> Cc: Arnd Bergmann <[email protected]> Reviewed-by: Arunpravin Paneer Selvam <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2024-05-17drm/buddy: stop using PAGE_SIZEMatthew Auld1-1/+1
The drm_buddy minimum page-size requirements should be distinct from the CPU PAGE_SIZE. Only restriction is that the minimum page-size is at least 4K. Signed-off-by: Matthew Auld <[email protected]> Cc: Arunpravin Paneer Selvam <[email protected]> Cc: Christian König <[email protected]> Cc: Arnd Bergmann <[email protected]> Reviewed-by: Arunpravin Paneer Selvam <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2024-05-16Merge tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds2-2/+37
Pull drm fix from Dave Airlie: - fix breakage in buddy allocator * tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel: drm/tests: Add a unit test for range bias allocation drm/buddy: Fix the range bias clear memory allocation issue
2024-05-16drm/tests: Add a unit test for range bias allocationArunpravin Paneer Selvam1-1/+35
Allocate cleared blocks in the bias range when the DRM buddy's clear avail is zero. This will validate the bias range allocation in scenarios like system boot when no cleared blocks are available and exercise the fallback path too. The resulting blocks should always be dirty. v1:(Matthew) - move the size to the variable declaration section. - move the mm.clear_avail init to allocator init. Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-16drm/buddy: Fix the range bias clear memory allocation issueArunpravin Paneer Selvam1-1/+2
Problem statement: During the system boot time, an application request for the bulk volume of cleared range bias memory when the clear_avail is zero, we dont fallback into normal allocation method as we had an unnecessary clear_avail check which prevents the fallback method leads to fb allocation failure following system goes into unresponsive state. Solution: Remove the unnecessary clear_avail check in the range bias allocation function. v2: add a kunit for this corner case (Daniel Vetter) Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Fixes: 96950929eb23 ("drm/buddy: Implement tracking clear page feature") Reviewed-by: Matthew Auld <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-15Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds1272-55354/+74218
Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ...
2024-05-13Merge tag 'v6.10-p1' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove crypto stats interface Algorithms: - Add faster AES-XTS on modern x86_64 CPUs - Forbid curves with order less than 224 bits in ecc (FIPS 186-5) - Add ECDSA NIST P521 Drivers: - Expose otp zone in atmel - Add dh fallback for primes > 4K in qat - Add interface for live migration in qat - Use dma for aes requests in starfive - Add full DMA support for stm32mpx in stm32 - Add Tegra Security Engine driver Others: - Introduce scope-based x509_certificate allocation" * tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits) crypto: atmel-sha204a - provide the otp content crypto: atmel-sha204a - add reading from otp zone crypto: atmel-i2c - rename read function crypto: atmel-i2c - add missing arg description crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy() crypto: sahara - use 'time_left' variable with wait_for_completion_timeout() crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout() crypto: caam - i.MX8ULP donot have CAAM page0 access crypto: caam - init-clk based on caam-page0-access crypto: starfive - Use fallback for unaligned dma access crypto: starfive - Do not free stack buffer crypto: starfive - Skip unneeded fallback allocation crypto: starfive - Skip dma setup for zeroed message crypto: hisilicon/sec2 - fix for register offset crypto: hisilicon/debugfs - mask the unnecessary info from the dump crypto: qat - specify firmware files for 402xx crypto: x86/aes-gcm - simplify GCM hash subkey derivation crypto: x86/aes-gcm - delete unused GCM assembly code crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath() hwrng: stm32 - repair clock handling ...
2024-05-13drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocationsMohamed Ahmed2-25/+22
Allow PTE kind and tile mode on BO create with VM_BIND, and add a GETPARAM to indicate this change. This is needed to support modifiers in NVK and ensure correctness when dealing with the nouveau GL driver. The userspace modifiers implementation this is for can be found here: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24795 Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI") Signed-off-by: Mohamed Ahmed <[email protected]> Reviewed-by: Faith Ekstrand <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocationsMohamed Ahmed2-25/+22
Allow PTE kind and tile mode on BO create with VM_BIND, and add a GETPARAM to indicate this change. This is needed to support modifiers in NVK and ensure correctness when dealing with the nouveau GL driver. The userspace modifiers implementation this is for can be found here: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24795 Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI") Signed-off-by: Mohamed Ahmed <[email protected]> Reviewed-by: Faith Ekstrand <[email protected]> Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13i2c: mux: Remove class argument from i2c_mux_add_adapter()Heiner Kallweit1-1/+1
99a741aa7a2d ("i2c: mux: gpio: remove support for class-based device instantiation") removed the last call to i2c_mux_add_adapter() with a non-null class argument. Therefore the class argument can be removed. Note: Class-based device instantiation is a legacy mechanism which shouldn't be used in new code, so we can rule out that this argument may be needed again in the future. Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Acked-by: Peter Rosin <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2024-05-13drm/panthor: Call panthor_sched_post_reset() even if the reset failedBoris Brezillon3-12/+16
We need to undo what was done in panthor_sched_pre_reset() even if the reset failed. We just flag all previously running groups as terminated when that happens to unblock things. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/panthor: Reset the FW VM to NULL on unplugBoris Brezillon1-0/+1
This way get NULL derefs instead of use-after-free if the FW VM is referenced after the device has been unplugged. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Steven Price <[email protected]> Acked-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/panthor: Keep a ref to the VM at the panthor_kernel_bo levelBoris Brezillon5-17/+22
Avoids use-after-free situations when panthor_fw_unplug() is called and the kernel BO was mapped to the FW VM. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/panthor: Force an immediate reset on unrecoverable faultsBoris Brezillon3-1/+12
If the FW reports an unrecoverable fault, we need to reset the GPU before we can start re-using it again. Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/panthor: Fix an off-by-one in the heap context retrieval logicBoris Brezillon1-2/+3
The heap ID is used to index the heap context pool, and allocating in the [1:MAX_HEAPS_PER_POOL] leads to an off-by-one. This was originally to avoid returning a zero heap handle, but given the handle is formed with (vm_id << 16) | heap_id, with vm_id > 0, we already can't end up with a valid heap handle that's zero. v4: - s/XA_FLAGS_ALLOC1/XA_FLAGS_ALLOC/ v3: - Allocate in the [0:MAX_HEAPS_PER_POOL-1] range v2: - New patch Fixes: 9cca48fa4f89 ("drm/panthor: Add the heap logical block") Reported-by: Eric Smith <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Tested-by: Eric Smith <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/panthor: Relax the constraints on the tiler chunk sizeBoris Brezillon1-4/+4
The field used to store the chunk size if 12 bits wide, and the encoding is chunk_size = chunk_header.chunk_size << 12, which gives us a theoretical [4k:8M] range. This range is further limited by implementation constraints, and all known implementations seem to impose a [128k:8M] range, so do the same here. We also relax the power-of-two constraint, which doesn't seem to exist on v10. This will allow userspace to fine-tune initial/max tiler memory on memory-constrained devices. v4: - Actually fix the range in the kerneldoc v3: - Add R-bs - Fix valid range in the kerneldoc v2: - Turn the power-of-two constraint into a page-aligned constraint to allow fine-tune of the initial/max heap memory size - Fix the panthor_heap_create() kerneldoc Fixes: 9cca48fa4f89 ("drm/panthor: Add the heap logical block") Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Reviewed-by: Steven Price <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/panthor: Make sure the tiler initial/max chunks are consistentBoris Brezillon1-0/+3
It doesn't make sense to have a maximum number of chunks smaller than the initial number of chunks attached to the context. Fix the uAPI header to reflect the new constraint, and mention the undocumented "initial_chunk_count > 0" constraint while at it. v3: - Add R-b v2: - Fix the check Fixes: 9cca48fa4f89 ("drm/panthor: Add the heap logical block") Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Reviewed-by: Steven Price <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-13drm/panthor: Fix tiler OOM handling to allow incremental renderingAntonino Maniscalco2-5/+14
If the kernel couldn't allocate memory because we reached the maximum number of chunks but no render passes are in flight (panthor_heap_grow() returning -ENOMEM), we should defer the OOM handling to the FW by returning a NULL chunk. The FW will then call the tiler OOM exception handler, which is supposed to implement incremental rendering (execute an intermediate fragment job to flush the pending primitives, release the tiler memory that was used to store those primitives, and start over from where it stopped). Instead of checking for both ENOMEM and EBUSY, make panthor_heap_grow() return ENOMEM no matter the reason of this allocation failure, the FW doesn't care anyway. v3: - Add R-bs v2: - Make panthor_heap_grow() return -ENOMEM for all kind of allocation failures - Document the panthor_heap_grow() semantics Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Antonino Maniscalco <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Reviewed-by: Steven Price <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-10Merge tag 'drm-fixes-2024-05-11' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds20-203/+122
Pull drm fixes from Dave Airlie: "This should be the last set of fixes for 6.9, i915, xe and amdgpu are the bulk here, one of the previous nouveau fixes turned up an issue, so reverting it, otherwise one core and a couple of meson fixes. core: - fix connector debugging output i915: - Automate CCS Mode setting during engine resets - Fix audio time stamp programming for DP - Fix parsing backlight BDB data xe: - Fix use zero-length element array - Move more from system wq to ordered private wq - Do not ignore return for drmm_mutex_init amdgpu: - DCN 3.5 fix - MST DSC fixes - S0i3 fix - S4 fix - HDP MMIO mapping fix - Fix a regression in visible vram handling amdkfd: - Spatial partition fix meson: - dw-hdmi: power-up fixes - dw-hdmi: add badngap setting for g12 nouveau: - revert SG_DEBUG fix that has a side effect" * tag 'drm-fixes-2024-05-11' of https://gitlab.freedesktop.org/drm/kernel: Revert "drm/nouveau/firmware: Fix SG_DEBUG error with nvkm_firmware_ctor()" drm/amdgpu: Fix comparison in amdgpu_res_cpu_visible drm/amdkfd: don't allow mapping the MMIO HDP page with large pages drm/xe: Use ordered WQ for G2H handler drm/xe/guc: Check error code when initializing the CT mutex drm/xe/ads: Use flexible-array Revert "drm/amdkfd: Add partition id field to location_id" dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users drm/amd/display: MST DSC check for older devices drm/amd/display: Fix idle optimization checks for multi-display and dual eDP drm/amd/display: Fix DSC-re-computing drm/amd/display: Enable urgent latency adjustments for DCN35 drm/connector: Add \n to message about demoting connector force-probes drm/i915/bios: Fix parsing backlight BDB data drm/i915/audio: Fix audio time stamp programming for DP drm/i915/gt: Automate CCS Mode setting during engine resets drm/meson: dw-hdmi: add bandgap setting for g12 drm/meson: dw-hdmi: power up phy on device init
2024-05-11Revert "drm/nouveau/firmware: Fix SG_DEBUG error with nvkm_firmware_ctor()"Dave Airlie1-12/+7
This reverts commit 52a6947bf576b97ff8e14bb0a31c5eaf2d0d96e2. This causes loading failures in [ 0.367379] nouveau 0000:01:00.0: NVIDIA GP104 (134000a1) [ 0.474499] nouveau 0000:01:00.0: bios: version 86.04.50.80.13 [ 0.474620] nouveau 0000:01:00.0: pmu: firmware unavailable [ 0.474977] nouveau 0000:01:00.0: fb: 8192 MiB GDDR5 [ 0.484371] nouveau 0000:01:00.0: sec2(acr): mbox 00000001 00000000 [ 0.484377] nouveau 0000:01:00.0: sec2(acr):load: boot failed: -5 [ 0.484379] nouveau 0000:01:00.0: acr: init failed, -5 [ 0.484466] nouveau 0000:01:00.0: init failed with -5 [ 0.484468] nouveau: DRM-master:00000000:00000080: init failed with -5 [ 0.484470] nouveau 0000:01:00.0: DRM-master: Device allocation failed: -5 [ 0.485078] nouveau 0000:01:00.0: probe with driver nouveau failed with error -50 I tried tracking it down but ran out of time this week, will revisit next week. Reported-by: Dan Moulding <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2024-05-11Merge tag 'drm-misc-fixes-2024-05-10' of ↵Dave Airlie2-40/+32
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: core: - fix connector debugging output meson: - dw-hdmi: power-up fixes - dw-hdmi: add badngap setting for g12 Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-11Merge tag 'amd-drm-fixes-6.9-2024-05-10' of ↵Dave Airlie7-18/+51
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.9-2024-05-10: amdgpu: - DCN 3.5 fix - MST DSC fixes - S0i3 fix - S4 fix - HDP MMIO mapping fix - Fix a regression in visible vram handling amdkfd: - Spatial partition fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-10drm/amdgpu: Fix comparison in amdgpu_res_cpu_visibleMichel Dänzer1-1/+1
It incorrectly claimed a resource isn't CPU visible if it's located at the very end of CPU visible VRAM. Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343 Reviewed-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reported-and-Tested-by: Jeremy Day <[email protected]> Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]> CC: [email protected]
2024-05-10drm/amdkfd: don't allow mapping the MMIO HDP page with large pagesAlex Deucher1-2/+5
We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space. Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space") Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-05-10Merge 6.9-rc7 into usb-nextGreg Kroah-Hartman52-338/+353
We want the USB fixes in here as well, and resolve a merge conflict in drivers/usb/dwc3/core.c Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-05-10Merge tag 'drm-xe-next-fixes-2024-05-09-1' of ↵Dave Airlie4-2/+9
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Driver Changes: - Use ordered WQ for G2H handler. (Matthew Brost) - Use flexible-array rather than zero-sized (Lucas De Marchi) Signed-off-by: Dave Airlie <[email protected]> From: Thomas Hellstrom <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/Zjz7SzCvfA3vQRxu@fedora
2024-05-10Merge tag 'drm-misc-next-fixes-2024-05-08' of ↵Dave Airlie31-160/+172
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next-fixes for v6.10-rc1: - panthor fixes. - Reverting Kconfig changes, and moving drm options to submenu. - Hide physical fb address in fb helper. - zynqmp bridge fix. - Revert broken ti-sn65dsi83 fix. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-05-10Merge tag 'drm-msm-next-2024-05-07' of ↵Dave Airlie133-41400/+25331
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.10 Core: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings (no driver changes, using SM8350 as a fallback compat) GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
2024-05-10Merge tag 'drm-xe-fixes-2024-05-09' of ↵Dave Airlie4-3/+13
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes - Fix use zero-length element array - Move more from system wq to ordered private wq - Do not ignore return for drmm_mutex_init Signed-off-by: Dave Airlie <[email protected]> From: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/c3rduifdp5wipkljdpuq4x6uowkc2uyzgdoft4txvp6mgvzjaj@7zw7c6uw4wrf
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada7-21/+19
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Nicolas Schier <[email protected]>
2024-05-09drm/xe/ads: Use flexible-arrayLucas De Marchi1-1/+1
Zero-length arrays are deprecated and flexible arrays should be used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arrays Reported-by: kernel test robot <[email protected]> Reported-by: Julia Lawall <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Matthew Brost <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]> (cherry picked from commit ee7284230644e21fef0e38fc5bf8f907b6bb7f7c) Signed-off-by: Thomas Hellström <[email protected]>
2024-05-09drm/xe: Use ordered WQ for G2H handlerMatthew Brost3-1/+8
System work queues are shared, use a dedicated work queue for G2H processing to avoid G2H processing getting block behind system tasks. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: <[email protected]> Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Francois Dugast <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 50aec9665e0babd62b9eee4e613d9a1ef8d2b7de) Signed-off-by: Thomas Hellström <[email protected]>
2024-05-09drm/xe: Use ordered WQ for G2H handlerMatthew Brost3-1/+8
System work queues are shared, use a dedicated work queue for G2H processing to avoid G2H processing getting block behind system tasks. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: <[email protected]> Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Francois Dugast <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 50aec9665e0babd62b9eee4e613d9a1ef8d2b7de) Signed-off-by: Lucas De Marchi <[email protected]>
2024-05-09drm/xe/guc: Check error code when initializing the CT mutexDaniele Ceraolo Spurio1-1/+4
The initialization via drmm_mutex_init can fail, so we need to check the return code and escalate the failure. The mutex initialization has been moved after all the other init steps that can't fail, so we're always guaranteed to have those done and don't have to check in the cleanup code. Signed-off-by: Daniele Ceraolo Spurio <[email protected]> Reviewed-by: Vinay Belgaumkar <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit b4abeb5545bb3ddcdda3c19067680ad0b2259be4) Signed-off-by: Lucas De Marchi <[email protected]>
2024-05-09drm/xe/ads: Use flexible-arrayLucas De Marchi1-1/+1
Zero-length arrays are deprecated and flexible arrays should be used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arrays Reported-by: kernel test robot <[email protected]> Reported-by: Julia Lawall <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Matthew Brost <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]> (cherry picked from commit ee7284230644e21fef0e38fc5bf8f907b6bb7f7c) Signed-off-by: Lucas De Marchi <[email protected]>
2024-05-08Revert "drm/amdkfd: Add partition id field to location_id"Lijo Lazar1-3/+2
This reverts commit c37ce764cd492f044dcdbb39616298f02b0dbc7f. RCCL library is currently not treating spatial partitions differently, hence this change is causing issues. Revert temporarily till RCCL implementation is ready for spatial partitions. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Jonathan Kim <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.