| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Those are not supposed to be used by drivers.
Signed-off-by: Christian König <[email protected]>
Acked-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/333290/
|
|
The ttm_mem_io_* functions were intended to be internal to TTM and
shouldn't have been used in a driver. They were exported in commit
afe6804c045fbd69a1b75c681107b5d6df9190de just for QXL.
Instead call the qxl_ttm_io_mem_reserve() function directly and
completely drop the free call since that is a dummy on QXL.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Gerd Hoffmann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/333289/
|
|
This way the TTM is destroyed with the correct dma_resv object
locked and we can even pipeline imported BO evictions.
v2: Limit this to only cases when the parent object uses a separate
reservation object as well. This fixes another OOM problem.
v3: fix init and try_lock on the wrong object
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Link: https://patchwork.freedesktop.org/patch/337499/
|
|
As the name says global memory and bo accounting is global. So it doesn't
make to much sense having pointers to global structures all around the code.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/332879/
|
|
This allows blocking for BOs to become available
in the memory management.
Amdgpu is doing this for quite a while now during CS. Now
apply the new behavior to all drivers using TTM.
Signed-off-by: Christian König <[email protected]>
Acked-by: Thomas Hellstrom <[email protected]>
Link: https://patchwork.freedesktop.org/patch/332878/
|
|
This feature is only used by vmwgfx and superfluous for everybody else.
Signed-off-by: Christian König <[email protected]>
Co-developed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Tested-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/333650/
|
|
-Issue found using checkpatch.pl
-Insert comments for memory barrier usage
Signed-off-by: Bhanusree <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
-Insert a blank line after the declarations.
-Issue found using checkpatch.pl
Signed-off-by: Bhanusree <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Right now if sink reported any PSR error or if it fails to
acknowledge the PSR wakeup it sets a flag and do not attempt to
enable PSR anymore. That is the safest approach to avoid repetitive
glitches and allowed us to have PSR enabled by default.
But from time to time even good PSR panels have a PSR error, causing
tests to fail. And for now we are not yet to the point were we could
try to recover from PSR errors, so lets add this information to the
debugfs so IGT can check if PSR is disabled because of sink errors or
not and eliminate this noise from CI runs.
Cc: Dhinakaran Pandiyan <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Ap Kamal <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Ramalingam C <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Gen11+ has more hardware planes than gen9 so we need to test additional
pipe interrupt register bits to recognize any GTT faults that happen on
these extra planes.
Bspec: 50335
Signed-off-by: Matt Roper <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As with commit 3fe0107e45ab, this change fixes multiple tests that are
using the invocation counts. Documentation doesn't list the workaround
for TGL but applying it fixes the tests.
Signed-off-by: Tapani Pälli <[email protected]>
Acked-by: Chris Wilson <[email protected]>
Reviewed-by: Lionel Landwerlin <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On testing the whitelists, using any of the nonpriv
flags when trying to access the register offset will lead
to failure.
Define address mask to get the mmio offset in order
to guard against any current and future flag usage.
v2: apply also on scrub_whitelisted_registers (Lionel)
Cc: Tapani Pälli <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Lionel Landwerlin <[email protected]>
Signed-off-by: Mika Kuoppala <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Reviewed-by: Lionel Landwerlin <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
'Link CRC error' will now have same error level as
other PSR2 errors like 'RFB storage error' and
'VSC SDP uncorrectable error'.
Signed-off-by: Ap Kamal <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For very subtle mistakes with topology refs, it can be rather difficult
to trace them down with the debugging info that we already have. I had
one such issue recently while trying to implement suspend/resume
reprobing for MST, and ended up coming up with this.
Inspired by Chris Wilson's wakeref tracking for i915, this adds a very
similar feature to the DP MST helpers, which allows for partial tracking
of topology refs for both ports and branch devices. This is a lot less
advanced then wakeref tracking: we merely keep a count of all of the
spots where a topology ref has been grabbed or dropped, then dump out
that history in chronological order when a port or branch device's
topology refcount reaches 0. So far, I've found this incredibly useful
for debugging topology refcount errors.
Since this has the potential to be somewhat slow and loud, we add an
expert kernel config option to enable or disable this feature,
CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Changes since v1:
* Don't forget to destroy topology_ref_history_lock
Changes since v4:
* Correct order of kref_put()/topology_ref_history_unlock - we can't
unlock the history after kref_put() since the memory might have been
freed by that point
* Don't print message on allocation error failures, the kernel already
does this for us
Changes since v5:
* Get rid of some leftover usages of %px
* Remove a leftover empty return; statement
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Finally! For a very long time, our MST helpers have had one very
annoying issue: They don't know how to reprobe the topology state when
coming out of suspend. This means that if a user has a machine connected
to an MST topology and decides to suspend their machine, we lose all
topology changes that happened during that period. That can be a big
problem if the machine was connected to a different topology on the same
port before resuming, as we won't bother reprobing any of the ports and
likely cause the user's monitors not to come back up as expected.
So, we start fixing this by teaching our MST helpers how to reprobe the
link addresses of each connected topology when resuming. As it turns
out, the behavior that we want here is identical to the behavior we want
when initially probing a newly connected MST topology, with a couple of
important differences:
- We need to be more careful about handling the potential races between
events from the MST hub that could change the topology state as we're
performing the link address reprobe
- We need to be more careful about handling unlikely state changes on
ports - such as an input port turning into an output port, something
that would be far more likely to happen in situations like the MST hub
we're connected to being changed while we're suspend
Both of which have been solved by previous commits. That leaves one
requirement:
- We need to prune any MST ports in our in-memory topology state that
were present when suspending, but have not appeared in the post-resume
link address response from their parent branch device
Which we can now handle in this commit by modifying
drm_dp_send_link_address(). We then introduce suspend/resume reprobing
by introducing drm_dp_mst_topology_mgr_invalidate_mstb(), which we call
in drm_dp_mst_topology_mgr_suspend() to traverse the in-memory topology
state to indicate that each mstb needs it's link address resent and PBN
resources reprobed.
On resume, we start back up &mgr->work and have it reprobe the topology
in the same way we would on a hotplug, removing any leftover ports that
no longer appear in the topology state.
Changes since v4:
* Split indenting changes in drm_dp_mst_topology_mgr_resume() into a
separate patch
* Only fire hotplugs when something has actually changed after a link
address probe
* Don't try to change port->connector at all on ports, just throw out
ports that need their connectors removed to make things easier.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since we're going to be reprobing the entire topology state on resume
now using sideband transactions, we need to ensure that we actually have
short HPD irqs enabled before calling drm_dp_mst_topology_mgr_resume().
So, do that.
Changes since v3:
* Fix typo in comments
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently, every single piece of code in amdgpu that loops through
connectors does it incorrectly and doesn't use the proper list iteration
helpers, drm_connector_list_iter_begin() and
drm_connector_list_iter_end(). Yeesh.
So, do that.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently, we enable hotplug detection only after we re-enable the
display. However, this is too late if we're planning on sending sideband
messages during the resume process - which we'll need to do in order to
reprobe the topology on resume.
So, enable hotplug events before reinitializing the display.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In order for suspend/resume reprobing to work, we need to be able to
perform sideband communications during suspend/resume, along with
runtime PM suspend/resume. In order to do so, we also need to make sure
that nouveau doesn't bother grabbing a runtime PM reference to do so,
since otherwise we'll start deadlocking runtime PM again.
Note that we weren't able to do this before, because of the DP MST
helpers processing UP requests from topologies in the same context as
drm_dp_mst_hpd_irq() which would have caused us to open ourselves up to
receiving hotplug events and deadlocking with runtime suspend/resume.
Now that those requests are handled asynchronously, this change should
be completely safe.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Does what it says on the tin.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This probably hasn't caused any problems up until now since it's
probably nearly impossible to encounter this in the wild, however if we
were to receive a connection status notification from the MST hub after
resume while we're in the middle of reprobing the link addresses for a
topology then there's a much larger chance that a port could have
changed from being an output port to input port (or vice versa). If we
forget to update this bit of information, we'll potentially ignore a
valid PDT change on a downstream port because we think it's an input
port.
So, make sure we read the input_port field in connection status
notifications in drm_dp_mst_handle_conn_stat() to prevent this from
happening once we've implemented suspend/resume reprobing.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This is a complicated one. Essentially, there's currently a problem in the MST
core that hasn't really caused any issues that we're aware of (emphasis on "that
we're aware of"): locking.
When we go through and probe the link addresses and path resources in a
topology, we hold no locks when updating ports with said information. The
members I'm referring to in particular are:
- ldps
- ddps
- mcs
- pdt
- dpcd_rev
- num_sdp_streams
- num_sdp_stream_sinks
- available_pbn
- input
- connector
Now that we're handling UP requests asynchronously and will be using some of
the struct members mentioned above in atomic modesetting in the future for
features such as PBN validation, this is going to become a lot more important.
As well, the next few commits that prepare us for and introduce suspend/resume
reprobing will also need clear locking in order to prevent from additional
racing hilarities that we never could have hit in the past.
So, let's solve this issue by using &mgr->base.lock, the modesetting
lock which currently only protects &mgr->base.state. This works
perfectly because it allows us to avoid blocking connection_mutex
unnecessarily, and we can grab this in connector detection paths since
it's a ww mutex. We start by having drm_dp_mst_handle_up_req() hold this
when updating ports. For drm_dp_mst_handle_link_address_port() things
are a bit more complicated. As I've learned the hard way, we can grab
&mgr->lock.base for everything except for port->connector. See, our
normal driver probing paths end up generating this rather obvious
lockdep chain:
&drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
However, sysfs grabs &drm->mode_config.mutex in order to protect itself
from connector state changing under it. Because this entails grabbing
kn->count, e.g. the lock that the kernel provides for protecting sysfs
contexts, we end up grabbing kn->count followed by
&drm->mode_config.mutex. This ends up creating an extremely rude chain:
&kn->count
-> &drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
I mean, look at that thing! It's just evil!!! This gross thing ends up
making any calls to drm_connector_register()/drm_connector_unregister()
impossible when holding any kind of modesetting lock. This is annoying
because ideally, we always want to ensure that
drm_dp_mst_port->connector never changes when doing an atomic commit or
check that would affect the atomic topology state so that it can
reliably and easily be used from future DRM DP MST helpers to assist
with tasks such as scanning through the current VCPI allocations and
adding connectors which need to have their allocations updated in
response to a bandwidth change or the like.
Being able to hold &mgr->base.lock throughout the entire link probe
process would have been _great_, since we could prevent userspace from
ever seeing any states in-between individual port changes and as a
result likely end up with a much faster probe and more consistent
results from said probes. But without some rework of how we handle
connector probing in sysfs it's not at all currently possible. In the
future, maybe we can try using the sysfs locks to protect updates to
connector probing state and fix this mess.
So for now, to protect everything other than port->connector under
&mgr->base.lock and ensure that we still have the guarantee that atomic
check/commit contexts will never see port->connector change we use a
silly trick. See: port->connector only needs to change in order to
ensure that input ports (see the MST spec) never have a ghost connector
associated with them. But, there's nothing stopping us from simply
throwing the entire port out and creating a new one in order to maintain
that requirement while still keeping port->connector consistent across
the lifetime of the port in atomic check/commit contexts. For all
intended purposes this works fine, as we validate ports in any contexts
we care about before using them and as such will end up reporting the
connector as disconnected until it's port's destruction finalizes. So,
we just do that in cases where we detect port->input has transitioned
from true->false. We don't need to worry about the other direction,
since a port without a connector isn't visible to userspace and as such
doesn't need to be protected by &mgr->base.lock until we finish
registering a connector for it.
For updating members of drm_dp_mst_port other than port->connector, we
simply grab &mgr->base.lock in drm_dp_mst_link_probe_work() for already
registered ports, update said members and drop the lock before
potentially registering a connector and probing the link address of it's
children.
Finally, we modify drm_dp_mst_detect_port() to take a modesetting lock
acquisition context in order to acquire &mgr->base.lock under
&connection_mutex and convert all it's users over to using the
.detect_ctx probe hooks.
With that, we finally have well defined locking.
Changes since v4:
* Get rid of port->mutex, stop using connection_mutex and just use our own
modesetting lock - mgr->base.lock. Also, add a probe_lock that comes
before this patch.
* Just throw out ports that get changed from an output to an input, and
replace them with new ports. This lets us ensure that modesetting
contexts never see port->connector go from having a connector to being
NULL.
* Write an extremely detailed explanation of what problems this is
trying to fix, since there's a _lot_ of context here and I honestly
forgot some of it myself a couple times.
* Don't grab mgr->lock when reading port->mstb in
drm_dp_mst_handle_link_address_port(). It's not needed.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently, MST lacks locking in a lot of places that really should have
some sort of locking. Hotplugging and link address code paths are some
of the offenders here, as there is actually nothing preventing us from
running a link address probe while at the same time handling a
connection status update request - something that's likely always been
possible but never seen in the wild because hotplugging has been broken
for ages now (with the exception of amdgpu, for reasons I don't think
are worth digging into very far).
Note: I'm going to start using the term "in-memory topology layout" here
to refer to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.
Locking in these places is a little tougher then it looks though.
Generally we protect anything having to do with the in-memory topology
layout under &mgr->lock. But this becomes nearly impossible to do from
the context of link address probes due to the fact that &mgr->lock is
usually grabbed under random various modesetting locks, meaning that
there's no way we can just invert the &mgr->lock order and keep it
locked throughout the whole process of updating the topology.
Luckily there are only two workers which can modify the in-memory
topology layout: drm_dp_mst_up_req_work() and
drm_dp_mst_link_probe_work(), meaning as long as we prevent these two
workers from traveling the topology layout in parallel with the intent
of updating it we don't need to worry about grabbing &mgr->lock in these
workers for reads. We only need to grab &mgr->lock in these workers for
writes, so that readers outside these two workers are still protected
from the topology layout changing beneath them.
So, add the new &mgr->probe_lock and use it in both
drm_dp_mst_link_probe_work() and drm_dp_mst_up_req_work(). Additionally,
add some more detailed explanations for how this locking is intended to
work to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports.
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Once upon a time, hotplugging devices on MST branches actually worked in
DRM. Now, it only works in amdgpu (likely because of how it's hotplug
handlers are implemented). On both i915 and nouveau, hotplug
notifications from MST branches are noticed - but trying to respond to
them causes messaging timeouts and causes the whole topology state to go
out of sync with reality, usually resulting in the user needing to
replug the entire topology in hopes that it actually fixes things.
The reason for this is because the way we currently handle UP requests
in MST is completely bogus. drm_dp_mst_handle_up_req() is called from
drm_dp_mst_hpd_irq(), which is usually called from the driver's hotplug
handler. Because we handle sending the hotplug event from this function,
we actually cause the driver's hotplug handler (and in turn, all
sideband transactions) to block on
drm_device->mode_config.connection_mutex. This makes it impossible to
send any sideband messages from the driver's connector probing
functions, resulting in the aforementioned sideband message timeout.
There's even more problems with this beyond breaking hotplugging on MST
branch devices. It also makes it almost impossible to protect
drm_dp_mst_port struct members under a lock because we then have to
worry about dealing with all of the lock dependency issues that ensue.
So, let's finally actually fix this issue by handling the processing of
up requests asyncronously. This way we can send sideband messages from
most contexts without having to deal with getting blocked if we hold
connection_mutex. This also fixes MST branch device hotplugging on i915,
finally!
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since we're going to be implementing suspend/resume reprobing very soon,
we need to make sure we are extra careful to ensure that our locking
actually protects the topology state where we expect it to. Turns out
this isn't the case with drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt(), both of which change port->mstb without
grabbing &mgr->lock.
Additionally, since most callers of these functions are just using it to
teardown the port's previous PDT and setup a new one we can simplify
things a bit and combine drm_dp_port_setup_pdt() and
drm_dp_port_teardown_pdt() into a single function:
drm_dp_port_set_pdt(). This function also handles actually ensuring that
we grab the correct locks when we need to modify port->mstb.
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This will allow us to add some locking for port->* members, in
particular the PDT and ->connector, which can't be done from
drm_dp_destroy_port() since we don't know what locks the caller might be
holding.
Note that we already do this in delayed_destroy_work (renamed from
destroy_connector_work in this patch) for ports, we're just making it so
mstbs are also destroyed in this worker.
Changes since v2:
* Clarify commit message
Changes since v4:
* Clarify commit message more
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
snb supports fp16 pixel formats on the sprite planes. Expose that
capability. Nothing special needs to be done, it just works.
v2: Rebase on top of icl fp16
Split snb+ sprite bits into a separate patch
Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
ivb+ supports fp16 pixel formats on the sprite planes planes. Expose
that capability.
On ivb/hsw fp16 scanout is slightly busted. The output from the plane
will have 1/4 the expected value. For the sprite plane we can fix that
up with the plane gamma unit. This was fixed on bdw.
v2: Rebase on top of icl fp16
Split the ivb+ sprite birs into a separate patch
v3: Move ivb_need_sprite_gamma() check one level up so that
we don't waste time programming garbage into he gamma registers
Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
gen4+ supports fp16 pixel formats on the primary planes. Add the
relevant code.
On ivb fp16 scanout is slightly busted. The output from the plane will
have 1/4 the expected value. For the primary plane we would have to
use the pipe gamma or pipe csc to correct that which would affect all
the other planes as well, hence we simply choose not to expose fp16
on the ivb primary plane. On hsw the primary plane got fixed.
On gmch platforms I observed that the plane width must be below 2k
pixels with fp16 or else we get a corrupted image. This limitation
does not seem to be documented in bspec. I verified the exact limit
using the chv pipe B primary plane since it has windowing capability.
The stride limits are unaffected by fp16.
v2: Rebase on top of icl fp16
Split thea gen4+ primary plane bits into a separate patch
Deal with HAS_GMCH()
Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
skl+ supports fp16 pixel formats on all universal planes. Add the
necessary bits to expose that capability. The main different to
icl is that we can't scale fp16, so need to add the relevant
checks.
v2: Rebase on top of icl fp16
Split skl+ bits into a separate patch
Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Now that the planes declare their minimum cdclk requirements properly
we don't need to check the cdclk in skl_max_scale() anymore. Just check
against the maximum downscale ratio, and move the code next to it's
only caller.
v2: Add a comment explaining the HQ vs. not thing
Reviewed-by: Juha-Pekka Heikkila <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The normal cdclk handling now takes care of making sure the
plane's pixel rate doesn't exceed the spec appointed percentage
of the cdclk frequency. Thus we can nuke
skl_check_pipe_max_pixel_rate().
Reviewed-by: Juha-Pekka Heikkila <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Various pixel formats and plane scaling impose additional constraints
on the cdclk frequency. Provide a new plane->min_cdclk() hook that
will be used to compute the minimum acceptable cdclk frequency for
each plane.
Annoyingly on some platforms the numer of active planes affects
this calculation so we must also toss in more planes into the
state when the number of active planes changes.
The sequence of state computation must also be changed:
1. check_plane() (updates plane's visibility etc.)
2. figure out if more planes now require update min_cdclk
computaion
3. calculate the new min cdclk for each plane in the state
4. if the minimum of any plane now exceeds the current
logical cdclk we recompute the cdclk
4. during cdclk computation take the planes' min_cdclk into
accoutn
5. follow the normal cdclk programming to change the
cdclk frequency. This may now require a modeset (except
on bxt/glk in some cases), which either succeeds or
fails depending on whether userspace has given
us permission to perform a modeset or not.
v2: Fix plane id check in intel_crtc_add_planes_to_state()
Only print the debug message when cdclk needs bumping
Use dev_priv->cdclk... as the old state explicitly
Reviewed-by: Juha-Pekka Heikkila <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
check_digital_port_conflicts() is done needlessly late. Move it earlier.
This will be needed as later on we want to set any_ms=true a bit later
for non-modesets too and we can't call this guy without the
connection_mutex held.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Stanislav Lisovskiy <[email protected]>
|
|
So far we've sort of protected the global state under dev_priv with
the connection_mutex. I wan to change that so that we can change the
cdclk even for pure plane updates. To that end let's formalize the
protection of the global state to follow what I started with the cdclk
code already (though not entirely properly) such that any crtc mutex
will suffice as a read lock, and all crtcs mutexes act as the write
lock.
We'll also pimp intel_atomic_state_clear() to clear the entire global
state, so that we don't accidentally leak stale information between
the locking retries.
As a slight optimization we'll only lock the crtc mutexes to protect
the global state, however if and when we actually have to poke the
hw (eg. if the actual cdclk changes) we must serialize commits
across all crtcs so that a parallel nonblocking commit can't get
ahead of the cdclk reprogamming. We do that by adding all crtcs to
the state.
TODO: the old global state examined during commit may still
be a problem since it always looks at the _latest_ swapped state
in dev_priv. Need to add proper old/new state for that too I think.
v2: Remeber to serialize the commits if necessary
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Stanislav Lisovskiy <[email protected]>
|
|
To make the logs a bit less confusing let's toss in some
debug prints to indicate whether the cdclk reprogramming
is going to happen with a single pipe active or whether we
need to turn all pipes off for the duration.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Stanislav Lisovskiy <[email protected]>
|
|
When reprobing an MST topology during resume, we have to account for the
fact that while we were suspended it's possible that mstbs may have been
removed from any ports in the topology. Since iterating downwards in the
topology requires that we hold &mgr->lock, destroying MSTBs from this
context would result in attempting to lock &mgr->lock a second time and
deadlocking.
So, fix this by first moving destruction of MSTBs into
destroy_connector_work, then rename destroy_connector_work and friends
to reflect that they now destroy both ports and mstbs.
Note that even though this means that MSTBs will still be accessible for
a short period of time between their removal from the topology and
delayed destruction, we are still protected against referencing a MSTB
with a refcount of 0 since we use kref_get_unless_zero() in most places.
Changes since v1:
* s/destroy_connector_list/destroy_port_list/
s/connector_destroy_lock/delayed_destroy_lock/
s/connector_destroy_work/delayed_destroy_work/
s/drm_dp_finish_destroy_branch_device/drm_dp_delayed_destroy_mstb/
s/drm_dp_finish_destroy_port/drm_dp_delayed_destroy_port/
- danvet
* Use two loops in drm_dp_delayed_destroy_work() - danvet
* Better explain why we need to do this - danvet
* Use cancel_work_sync() instead of flush_work() - flush_work() doesn't
account for work requeing
Cc: Juston Li <[email protected]>
Cc: Imre Deak <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.
Signed-off-by: Dariusz Marcinkiewicz <[email protected]>
Tested-by: Hans Verkuil <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
Commit Fixes: b9f8b09ce256 ("drm/tegra: Setup shared IOMMU domain after
initialization") changed the initialization order of the IOMMU related
bits but didn't update the cleanup path accordingly. This asymmetry can
cause failures during error recovery.
Fixes: b9f8b09ce256 ("drm/tegra: Setup shared IOMMU domain after initialization")
Signed-off-by: Thierry Reding <[email protected]>
Reviewed-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]>
|
|
The hardware is not guaranteed to be enabled during execution of the
tegra_sor_init() function, which can lead to a crash on some Tegra SoCs.
Fix this by moving all register programming into code that is guaranteed
to only be executed when the hardware is enabled.
Signed-off-by: Thierry Reding <[email protected]>
|
|
Fix misspellings of "connector" and "connection"
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
GEM VRAM provides an implementation for prepare_fb() and cleanup_fb()
of struct drm_plane_helper_funcs. Switch over vboxvideo.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This patch implements prepare_fb() and cleanup_fb() in hibmc with the
GEM VRAM helpers. In the current code, pinning the BO is performed by
hibmc_plane_atomic_update(), where the operation does not belong.
This patch also fixes a bug where the pinned BO was never unpinned.
Pinning multiple BOs would have exhaused the available VRAM and further
pin operations would have failed, leaving the display in a corrupt
state.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
GEM VRAM provides an implementation for prepare_fb() and cleanup_fb()
of struct drm_simple_display_pipe_funcs. Switch over bochs.
v2:
* use helpers for struct drm_simple_display_pipe_funcs
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The new helpers pin and unpin a framebuffer's GEM VRAM objects during
plane updates. This should be sufficient for most drivers' implementation
of prepare_fb() and cleanup_fb().
v2:
* provide helpers for struct drm_simple_display_pipe_funcs
* rename plane-helper funcs
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add missing descriptions of i915_perf_stream structure members
to documentation.
Cc: Umesh Nerlige Ramappa <[email protected]>
Cc: Lionel Landwerlin <[email protected]>
Cc: Robert Bragg <[email protected]>
Signed-off-by: Anna Karas <[email protected]>
Reviewed-by: Lionel Landwerlin <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
-Add comment for memory barrier
-Issue found using checkpatch.pl
Signed-off-by: Bhanusree <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Remove unnecessary casts to pointer types passed to kfree.
Issue detected by coccinelle:
@@
type t1;
expression *e;
@@
-kfree((t1 *)e);
+kfree(e);
Signed-off-by: Wambui Karuga <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Passing the wrong type feels icky, everywhere else we use the pipe as
the first parameter. Spotted while discussing patches with Thomas
Zimmermann.
v2: Make xen compile correctly
Acked-By: Thomas Zimmermann <[email protected]> (v1)
Cc: Thomas Zimmermann <[email protected]>
Cc: Noralf Trønnes <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: [email protected]
Cc: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Split the legacy submission backend from the common CS ring buffer
handling.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|