| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
prepare_suspend() is intended to be used for any IP blocks
that must allocate memory during the suspend sequence.
Reported-by: Stephen Rothwell <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: cb11ca3233aa ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks")
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add some additional bitfields.
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add missing free on an error path.
Fixes: 511a95552ec8 ("drm/amd/pm: Add SMU 13.0.6 support")
Reviewed-by: Yang Wang <[email protected]>
Signed-off-by: Kunwu.Chan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It's not enabled in hardware so the code is dead.
Remove it.
Reviewed-by: Jack Xiao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If one of the devices in the hive detects a
fatal error, need to send ras recovery reset
message to PMFW of all devices in the hive.
For that add a flag in hive to indicate that
it's undergoing ras recovery
Signed-off-by: Asad Kamal <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
A critial part of "drm/amd/display: Fix windowed MPO video with ODM
combine for DCN32" is lost during promotion to upstream. This patch
addes the code back to dc.c.
Signed-off-by: Stylon Wang <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This reverts commit 0bdebfef3fb2b6291000765eaa9c6c8030293fce.
XCP_CTL register is programmed by firmware and
register access is protected.
Signed-off-by: Mangesh Gadre <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add missing IP callbacks.
Signed-off-by: Lang Yu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Veerabadhran Gopalakrishnan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update the PMFW version check the the ROCm optimizations.
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
At present, we have found that there may be a problem of blurred
screen during fast sleep/resume. The direct cause of the blurred
screen is that the IC does not receive 0x28/0x10. Because of the
particularity of the IC, before the panel enters sleep hid must
stop scanning, as i2c_hid_core_suspend before ili9882t_disable.
If move the ili9882t_enter_sleep_mode function to ili9882t_unprepare,
touch reset will pull low before panel entersleep, which does not meet
the timing requirements.. So in order to solve this problem, the IC
can handle it through the exception mechanism when it cannot receive
0x28/0x10 command. Handling exceptions requires a reset 50ms delay.
Refer to vendor detailed analysis [1].
Ilitek vendor also suggested switching the page before entering sleep to
avoid panel IC not receiving 0x28/0x10 command.
Note: 0x28 is display off, 0x10 is sleep in.
[1]: https://github.com/ILITEK-LoganLin/Document/tree/main/ILITEK_Power_Sequence
Signed-off-by: Cong Yang <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Starry ILI9882t-based panel should never have been part of the boe
tv101wum driver, it is clearly based on the Ilitek ILI9882t display
controller and if you look at the custom command sequences for the
panel these clearly contain the signature Ilitek page switch (0xff)
commands. The hardware has nothing in common with the other panels
supported by this driver.
Break this out into a separate driver and config symbol instead.
If the placement here is out of convenience for using similar code,
we should consider creating a helper library instead.
Co-developed-by: Linus Walleij <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Cong Yang <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As drm_dp_get_mst_branch_device_by_guid() is called from
drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked,
otherwise NULL dereference may occur in the call to
the memcpy() and cause following:
[12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049
[12579.365878] #PF: supervisor read access in kernel mode
[12579.365880] #PF: error_code(0x0000) - not-present page
[12579.365882] PGD 0 P4D 0
[12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI
...
[12579.365895] Workqueue: events_long drm_dp_mst_up_req_work
[12579.365899] RIP: 0010:memcmp+0xb/0x29
[12579.365921] Call Trace:
[12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64
[12579.365930] drm_dp_mst_up_req_work+0x137/0x416
[12579.365933] process_one_work+0x1d0/0x419
[12579.365935] worker_thread+0x11a/0x289
[12579.365938] kthread+0x13e/0x14f
[12579.365941] ? process_one_work+0x419/0x419
[12579.365943] ? kthread_blkcg+0x31/0x31
[12579.365946] ret_from_fork+0x1f/0x30
As get_mst_branch_device_by_guid_helper() is recursive, moving condition
to the first line allow to remove a similar one for step over of NULL elements
inside a loop.
Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch")
Cc: <[email protected]> # 4.14+
Signed-off-by: Lukasz Majczak <[email protected]>
Reviewed-by: Radoslaw Biernacki <[email protected]>
Signed-off-by: Manasi Navare <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Improve readability by putting all register constants into a separate
header file. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_MISC_PORT_READ to AST_IO_VGAMR_R to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_INPUT_STATUS1_READ to AST_IO_VGAIR1_R to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_CRTC_PORT to AST_IO_VGACRI to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_GR_PORT to AST_IO_VGAGRI to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_DAC_DATA to AST_IO_VGAPDR to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_DAC_INDEX_WRITE to AST_IO_VGADWR to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_DAC_INDEX_READ to AST_IO_VGADRR to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_VGA_SEQ_PORT to AST_IO_VGASRI to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_VGA_ENABLE_PORT to AST_IO_VGAER to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_MISC_PORT_WRITE to AST_IO_VGAMR_W to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename AST_IO_AR_PORT_WRITE to AST_IO_VGAARI_W to align naming
in the driver with documentation. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Looks like RADV is actually hitting this.
Signed-off-by: Christian König <[email protected]>
Fixes: ca6c1e210aa7 ("drm/amdgpu: use the new drm_exec object for CS v3")
Acked-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In recent discussions around some performance improvements in the file
handling area we discussed switching the file cache to rely on
SLAB_TYPESAFE_BY_RCU which allows us to get rid of call_rcu() based
freeing for files completely. This is a pretty sensitive change overall
but it might actually be worth doing.
The main downside is the subtlety. The other one is that we should
really wait for Jann's patch to land that enables KASAN to handle
SLAB_TYPESAFE_BY_RCU UAFs. Currently it doesn't but a patch for this
exists.
With SLAB_TYPESAFE_BY_RCU objects may be freed and reused multiple times
which requires a few changes. So it isn't sufficient anymore to just
acquire a reference to the file in question under rcu using
atomic_long_inc_not_zero() since the file might have already been
recycled and someone else might have bumped the reference.
In other words, callers might see reference count bumps from newer
users. For this reason it is necessary to verify that the pointer is the
same before and after the reference count increment. This pattern can be
seen in get_file_rcu() and __files_get_rcu().
In addition, it isn't possible to access or check fields in struct file
without first aqcuiring a reference on it. Not doing that was always
very dodgy and it was only usable for non-pointer data in struct file.
With SLAB_TYPESAFE_BY_RCU it is necessary that callers first acquire a
reference under rcu or they must hold the files_lock of the fdtable.
Failing to do either one of this is a bug.
Thanks to Jann for pointing out that we need to ensure memory ordering
between reallocations and pointer check by ensuring that all subsequent
loads have a dependency on the second load in get_file_rcu() and
providing a fixup that was folded into this patch.
Cc: Jann Horn <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
When supporting OA for TGL, it was seen that the context valid bit in
the report ID was not defined, however revisiting the spec seems to have
this bit defined. The bit is used to determine if a context is valid on
a context switch and is essential to determine active and idle periods
for a context. Re-enable the context valid bit for gen12 platforms.
BSpec: 52196 (description of report_id)
v2: Include BSpec reference (Ashutosh)
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <[email protected]>
Reviewed-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This bit does not cause an explicit L3 flush. We already use
PIPE_CONTROL_DC_FLUSH_ENABLE for that purpose.
v2: Use FLUSH_L3 only pre-MTL since spec will likely remain
the same going forward.
Cc: Nirmoy Das <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Acked-by: Mika Kuoppala <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Signed-off-by: Vinay Belgaumkar <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Due to the initial confusion about MIPI_DSI_MODE_EOT_PACKET, properly
renamed to MIPI_DSI_MODE_NO_EOT_PACKET, reflecting its actual meaning,
both the DSI_TXRX_CON register setting for bit (HSTX_)DIS_EOT and the
later calculation for horizontal sync-active (HSA), back (HBP) and
front (HFP) porches got incorrect due to the logic being inverted.
This means that a number of settings were wrong because....:
- DSI_TXRX_CON register setting: bit (HSTX_)DIS_EOT should be
set in order to disable the End of Transmission packet;
- Horizontal Sync and Back/Front porches: The delta used to
calculate all of HSA, HBP and HFP should account for the
additional EOT packet.
Before this change...
- Bit (HSTX_)DIS_EOT was being set when EOT packet was enabled;
- For HSA/HBP/HFP delta... all three were wrong, as words were
added when EOT disabled, instead of when EOT packet enabled!
Invert the logic around flag MIPI_DSI_MODE_NO_EOT_PACKET in the
MediaTek DSI driver to fix the aforementioned issues.
Fixes: 8b2b99fd7931 ("drm/mediatek: dsi: Fine tune the line time caused by EOTp")
Fixes: c87d1c4b5b9a ("drm/mediatek: dsi: Use symbolized register definition")
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Alexandre Mergnat <[email protected]>
Tested-by: Michael Walle <[email protected]>
Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
If measure_breadcrumb_dw() returns an error and bce isn't created,
this commit ensures that intel_engine_destroy_pinned_context()
is not called with a NULL bce.
v2: Fix the subject s/UAF/null-ptr-deref(Jani)
Fixes: b35274993680 ("drm/i915: Create a kernel context for GGTT updates")
Cc: Oak Zeng <[email protected]>
Cc: Andi Shyti <[email protected]>
Cc: Jani Nikula <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In debugging platform or firmware related MEI-PXP connection
issues, having a timeout when clients (such as i915) calling
into mei-pxp's send/receive functions have proven useful as opposed to
blocking forever until the kernel triggers a watchdog panic (when
platform issues are experienced).
Update the mei-pxp component interface send and receive functions
to take in timeouts.
Signed-off-by: Alan Previn <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
are used by 16 grayscale dot matrix OLED panels, extend the driver to also
support this chip family.
Instead adding an indirection level to allow the same modesetting pipeline
to be used by both controller families, add another pipeline for SSD132x.
This leads to some code duplication but it makes the driver easier to read
and reason about. Once other controller families are added (e.g: SSD133x),
some common code can be factored out in driver helpers to be shared by the
different families. But that can be done later once these patterns emerge.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There are some commands that are shared between the SSD130x and SSD132x
controller families, define these as a common SSD13XX set of commands.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
To allow the driver to have a per Solomon display controller modesetting
pipeline and support aother controller families besides SSD130x.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This deemed useful to avoid hardcoding a page height and allow to support
other Solomon controller families, but dividing the screen in pages seems
to be something that is specific to the SSD130x chip family.
For example, SSD132x chip family divides the screen in segments (columns)
and common outputs (rows), so the concept of screen pages does not exist
for the SSD132x family.
Let's drop this field from the device info struct and just use a constant
SSD130X_PAGE_HEIGHT macro to define the page height. While being there,
replace hardcoded 8 values in places where it is used as the page height.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.7-2023-10-13:
amdgpu:
- DC replay fixes
- Misc code cleanups and spelling fixes
- Documentation updates
- RAS EEPROM Updates
- FRU EEPROM Updates
- IP discovery updates
- SR-IOV fixes
- RAS updates
- DC PQ fixes
- SMU 13.0.6 updates
- GC 11.5 Support
- NBIO 7.11 Support
- GMC 11 Updates
- Reset fixes
- SMU 11.5 Updates
- SMU 13.0 OD support
- Use flexible arrays for bo list handling
- W=1 Fixes
- SubVP fixes
- DPIA fixes
- DCN 3.5 Support
- Devcoredump fixes
- VPE 6.1 support
- VCN 4.0 Updates
- S/G display fixes
- DML fixes
- DML2 Support
- MST fixes
- VRR fixes
- Enable seamless boot in more cases
- Enable content type property for HDMI
- OLED fixes
- Rework and clean up GPUVM TLB flushing
- DC ODM fixes
- DP 2.x fixes
- AGP aperture fixes
- SDMA firmware loading cleanups
- Cyan Skillfish GPU clock counter fix
- GC 11 GART fix
- Cache GPU fault info for userspace queries
- DC cursor check fixes
- eDP fixes
- DC FP handling fixes
- Variable sized array fixes
- SMU 13.0.x fixes
- IB start and size alignment fixes for VCN
- SMU 14 Support
- Suspend and resume sequence rework
- vkms fix
amdkfd:
- GC 11 fixes
- GC 10 fixes
- Doorbell fixes
- CWSR fixes
- SVM fixes
- Clean up GC info enumeration
- Rework memory limit handling
- Coherent memory handling fixes
- Use partial migrations in GPU faults
- TLB flush fixes
- DMA unmap fixes
- GC 9.4.3 fixes
- SQ interrupt fix
- GTT mapping fix
- GC 11.5 Support
radeon:
- Misc code cleanups
- W=1 Fixes
- Fix possible buffer overflow
- Fix possible NULL pointer dereference
UAPI:
- Add EXT_COHERENT memory allocation flags. These allow for system scope atomics.
Proposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88
- Add support for new VPE engine. This is a memory to memory copy engine with advanced scaling, CSC, and color management features
Proposed mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25713
- Add INFO IOCTL interface to query GPU faults
Proposed Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23238
Proposed libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/298
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Meteor Lake has demonstrated consistent stability for some time.
All user-space API modifications tide to its core platform
functions are operational.
The necessary firmware components are set up and comprehensive
testing has been condused over a period.
Given the recent faborable CI results, as well, we believe it's
time to eliminate the 'force_probe' prerequisite and activate the
platform by default.
Signed-off-by: Aditya Chauhan <[email protected]>
Signed-off-by: Andrzej Hajda <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Jonathan Cavitt <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Acked-by: Lee Shawn C <[email protected]>
Tested-by: Lee Shawn C <[email protected]>
Tested-by: Karthik B S <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Enable GuC TLB invalidations for MTL. Though more platforms than just
MTL support GuC TLB invalidations, MTL is presently the only platform
that requires it for any purpose, so only enable it there for now to
minimize cross-platform impact.
Signed-off-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For the gt_tlb live selftest, when operating on the GSC engine,
increase the timeout from 10 ms to 200 ms because the GSC
engine is a bit slower than the rest.
Signed-off-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It is not an error for GuC TLB invalidations to fail when the GT is
wedged or disabled, so do not process a wait failure as one in
guc_send_invalidate_tlb.
Signed-off-by: Fei Yang <[email protected]>
Signed-off-by: Jonathan Cavitt <[email protected]>
CC: John Harrison <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In case of GT is suspended, don't allow submission of new TLB invalidation
request and cancel all pending requests. The TLB entries will be
invalidated either during GuC reload or on system resume.
Signed-off-by: Fei Yang <[email protected]>
Signed-off-by: Jonathan Cavitt <[email protected]>
CC: John Harrison <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The GuC firmware had defined the interface for Translation Look-Aside
Buffer (TLB) invalidation. We should use this interface when
invalidating the engine and GuC TLBs.
Add additional functionality to intel_gt_invalidate_tlb, invalidating
the GuC TLBs and falling back to GT invalidation when the GuC is
disabled.
The invalidation is done by sending a request directly to the GuC
tlb_lookup that invalidates the table. The invalidation is submitted as
a wait request and is performed in the CT event handler. This means we
cannot perform this TLB invalidation path if the CT is not enabled.
If the request isn't fulfilled in two seconds, this would constitute
an error in the invalidation as that would constitute either a lost
request or a severe GuC overload.
With this new invalidation routine, we can perform GuC-based GGTT
invalidations. GuC-based GGTT invalidation is incompatible with
MMIO invalidation so we should not perform MMIO invalidation when
GuC-based GGTT invalidation is expected.
The additional complexity incurred in this patch will be necessary for
range-based tlb invalidations, which will be platformed in the future.
Signed-off-by: Prathap Kumar Valsan <[email protected]>
Signed-off-by: Bruce Chang <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Jonathan Cavitt <[email protected]>
Signed-off-by: Aravind Iddamsetty <[email protected]>
Signed-off-by: Fei Yang <[email protected]>
CC: Andi Shyti <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As of now, there is no mechanism for tracking a given request's
progress through the queue. Instead, add a helper that returns
an estimated maximum time the queue should take to drain if
completely full.
Suggested-by: John Harrison <[email protected]>
Signed-off-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add device info flags for if GuC TLB Invalidation is enabled.
Signed-off-by: Jonathan Cavitt <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
If we can't find a free fence register to handle a fault in the GMADR
range just return VM_FAULT_NOPAGE without populating the PTE so that
userspace will retry the access and trigger another fault. Eventually
we should find a free fence and the fault will get properly handled.
A further improvement idea might be to reserve a fence (or one per CPU?)
for the express purpose of handling faults without having to retry. But
that would require some additional work.
Looks like this may have gotten broken originally by
commit 39965b376601 ("drm/i915: don't trash the gtt when running out of fences")
as that changed the errno to -EDEADLK which wasn't handle by the gtt
fault code either. But later in commit 2feeb52859fc ("drm/i915/gt: Fix
-EDEADLK handling regression") I changed it again to -ENOBUFS as -EDEADLK
was now getting used for the ww mutex dance. So this fix only makes
sense after that last commit.
Cc: [email protected]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9479
Fixes: 2feeb52859fc ("drm/i915/gt: Fix -EDEADLK handling regression")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Andi Shyti <[email protected]>
(cherry picked from commit 7f403caabe811b88ab0de3811ff3f4782c415761)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Currently, with MFD/pin assignment D, the driver clears the pipe reset bit
of lane 1 which is not owned by display. This causes the display
to block S0iX.
By not clearing this bit for lane 1 and keeping whatever default, S0ix
started to work. This is already what the driver does at the end
of the phy lane reset sequence (Step#8)
Bspec: 65451
Fixes: 619a06dba6fa ("drm/i915/mtl: Reset only one lane in case of MFD")
Cc: Mika Kahola <[email protected]>
Cc: Gustavo Sousa <[email protected]>
Signed-off-by: Khaled Almahallawy <[email protected]>
Reviewed-by: Gustavo Sousa <[email protected]>
Signed-off-by: Radhakrishna Sripada <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4a07f063d20c46524f00976f4537de72d9f31c4e)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Eliminate DRM_SCHED_PRIORITY_UNSET, value of -2, whose only user was
amdgpu. Furthermore, eliminate an index bug, in that when amdgpu boots, it
calls drm_sched_entity_init() with DRM_SCHED_PRIORITY_UNSET, which uses it to
index sched->sched_rq[].
Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
A context priority value of AMD_CTX_PRIORITY_UNSET is now invalid--instead of
carrying it around and passing it to the Direct Rendering Manager--and it
becomes AMD_CTX_PRIORITY_NORMAL in amdgpu_ctx_ioctl(), the gateway to context
creation.
Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Just use a simple {} to zero initialize arrays/structs instead
of the hodgepodge of stuff we are using currently.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
|
|
Just use a simple {} to zero initialize arrays/structs instead
of the hodgepodge of stuff we are using currently.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
|